In vivo anterior cruciate ligament length pattern assessment secondary to differences in the femoral attachment under loading condition using image-matching techniques.

BACKGROUND: The anterior cruciate ligament is composed of two functional bundles and is crucial for knee function. There is limited understanding of the role of each individual bundle and the influence on length pattern due to difference in bone tunnel position under loading conditions throughout the range of motion. We measured point to point length between the femoral and tibial footprints of the ligament throughout the range of motion in normal knees, under normal loading conditions, and investigated length pattern changes secondary to differences in the femoral footprint. We hypothesized that anteromedial and posterolateral bundles have complementary roles, and the ligament length pattern is influenced by the footprint position. METHODS: We studied the squat movements of six healthy knees and measured point to point footprint distance. The footprint distances were measured after changing them to be 10% lower, 10% shallower, and both 10% lower and shallower than the defined anatomical femoral footprint. RESULTS: Average length changes of 12.0 and 14.1 mm from maximum extension (10°) to deep flexion (150°) were observed when the anteromedial and posterolateral bundles were defined by the default anatomical position. Maximum and minimum length were reached during full extension and flexion for both the anteromedial and posterolateral bundles, respectively. At 10% lower, length increased 2.2 mm over the default value in both the anteromedial and posterolateral lengths. At 10% shallower, decreases of 4.1 mm and 3.9 mm were observed compared with the default anteromedial and posterolateral lengths, respectively. In the 10% lower and 10% shallower position, anteromedial and posterolateral lengths decreased 2.1 mm and 1.9 mm compared with the default value, respectively. CONCLUSIONS: The anteromedial and posterolateral bundles have a complementary role. Femoral footprint position defined in the lower direction leads to stronger tension during extension, while the higher and shallower direction leads to isometry during flexion, and the deeper direction leads to laxity during flexion. The target bone tunnel position is that the anteromedial bundle should not to be too low and too deep to maintain function of bundle with less change in length. In addition, the posterolateral bundle should be somewhat lower and/or deeper than the anteromedial, with the expectation that it will function to induce stronger tension at the extended position. However, we should avoid lower position when we cannot prepare a sufficient diameter of reconstructed bundle to avoid re-injury due to excessive tension.

Varus-valgus stability at 90° flexion correlates with the stability at midflexion range more widely than that at 0° extension in posterior-stabilized total knee arthroplasty.

INTRODUCTION: Midflexion stability can potentially improve the outcome of total knee arthroplasty (TKA). The purpose of this study was to evaluate the correlation between varus-valgus stability at 0° of extension and 90° of flexion and that at the midflexion range in posterior-stabilized (PS)-TKA. MATERIALS AND METHODS: Forty-three knees that underwent PS-TKA were evaluated. Manual mild passive varus-valgus stress was applied to the knees, and the postoperative maximum varus-valgus stability was measured every 10° throughout range of motion, using a navigation system. Correlations between the stability at 0°, 90° of flexion, and that at each midflexion angle were evaluated using Spearman's correlation coefficients. RESULTS: The stability of 0° modestly correlated with that of 10°-20°, but it did not significantly correlate with that of 30°-80°. However, the stability of 90° strongly correlated with that of 60°-80°, modestly correlated with that of 40°-50°, weakly correlated with that of 20°-30°, and did not correlate with that of 10°. CONCLUSIONS: The present study confirmed the importance of acquiring stability at 90° flexion to achieve midflexion stability in PS-TKA. However, initial flexion stability did not strongly correlate with the stability at either 0° or 90°. Our findings can provide useful information for understanding varus-valgus stability throughout the range of motion in PS-TKA. Attention to soft tissue balancing is necessary to stabilize a knee at the initial flexion range in PS-TKA.

Anterior coverage after eccentric rotational acetabular osteotomy for the treatment of developmental dysplasia of the hip.

BACKGROUND: In periacetabular osteotomy for the treatment of developmental dysplasia of the hip, impairments in ADL due to limitations in hip flexion can occur when anterior displacement is added to lateral displacement in order to obtain sufficient femoral head coverage. This study was conducted to determine, by the range of motion (ROM) simulation based on CT images, the minimum angle of hip flexion and internal rotation at 90° of flexion that is necessary to avoid ADL impairments after eccentric rotational acetabular osteotomy (ERAO) and to estimate the angles of anterior femoral head coverage on plain radiography that enable the above flexion. METHODS: Of 47 hips treated with ERAO at our hospital from December 2007 to May 2012, 27 hips without progressive osteoarthritis which could be CT scanned were examined and included. The mean age at the time of surgery was 40.7 years (SD 1.8). The postoperative follow-up period was 30.2 months (SD 3.6). Two hips were in male patients and 25 hips were in female patients. The disease stage prior to surgery was pre-osteoarthritis in 5 hips, early in 11 hips, and progressive in 11 hips. We checked whether the patients were capable of activities that require deep hip flexion for the evaluation of postoperative ADL. Radiographic examination was performed before and one year after surgery to calculate LCE angle, Sharp angle, AHI, and VCA angle. The angle at which impingement of the displaced fragment of the bone and the femur appeared was measured using 3D CAD software, and the relationship between this angle and the physical findings, ADL impairment, or radiographic findings, were also examined. RESULTS: 22 out of 27 hips that were capable of 116° or more of flexion or 42° or more of internal rotation at 90° of flexion in ROM simulation showed the absence of ADL impairment and a postoperative VCA angle ≤42°, whereas 5 hips with 110° or less of flexion or 40° or less of internal rotation at 90° of flexion in ROM simulation had ADL impairments associated with limitations in hip flexion and a postoperative VCA angle ≥46°. CONCLUSIONS: Anterior and lateral coverage requires a postoperative VCA angle of ≥20° to achieve anterior structural stability and an LCE angle of >25° to obtain adequate superior lateral coverage of the femoral head. A VCA angle ≤42° is required to avoid impingement during deep flexion. A VCA angle ≥46° is a probable risk factor for pincer FAI syndrome after ERAO.

Bi-cruciate substituting total knee arthroplasty provides varus-valgus stability throughout the midflexion range.

BACKGROUND: Proper soft tissue balance is crucial for a successful clinical outcome after total knee arthroplasty (TKA). Bi-cruciate substituting (BCS)-TKA has been developed to more closely approximate normal knee characteristics. The purpose of the present study was to evaluate midflexion laxity before and after BCS-TKA using a navigation system, and assess the correlation between intraoperative laxity and the maximum flexion angle after surgery. METHODS: Fifty-one knees in 46 patients with osteoarthritis replaced with BCS prosthesis were assessed. Manual mild passive internal-external rotational and varus-valgus stress was applied to the knees, and the maximum total laxity was measured automatically by a navigation system before and after TKA. The correlations with the range of motion (ROM) were evaluated using Spearman's correlation coefficients (ρ). RESULTS: Internal-external stress assessment revealed no statistically significant difference at each flexion angle before and after BCS-TKA. In contrast, the varus-valgus stress assessment revealed that BCS-TKA had significantly decreased varus-valgus laxity from preoperative levels at 20-120° flexion angles. Furthermore, the maximum flexion angle at six months after surgery significantly correlated with the intraoperative laxity at deep flexion range. CONCLUSION: BCS-TKA stabilized varus-valgus laxity to better than preoperative levels at midflexion range.

Three-dimensional motion analysis of the patellar component in total knee arthroplasty by the image matching method using image correlations.

In total knee arthroplasty (TKA), the patella is significantly associated with range of motion and gait performance. Currently, no highly accurate methods are available that can measure the 3D in vivo behavior of the TKA patellar component, as the component is made of x-ray-permeable ultra-high molecular weight polyethylene. Previously, we developed a computer simulation that matches CT scan and unidirectional radiographic images using image correlations, and applied it to kinematic studies of natural and TKA knees. The examination of the measurement accuracy for the patellar bone of a fresh-frozen pig knee joint yielded a root mean square error of 0.2 mm in translation and 0.2° in rotation. In this study, we recruited four patients who had a TKA and investigated 3D movements of the patellar component during squatting. We could visualize the patellar component using the position of the holes drilled for the component peg, and estimated and visualized the contact points between the patellar and femoral components. The principles and the utility of the simulation method are reported. This analytical method is useful for evaluating the pathologies and post-surgical conditions of the knee and other joints.