Measurements of oculo-palpebral landmarks and evaluation of patient's head position.

PURPOSE: Keeping the head in a neutral position is requisite for glasses/lenses/head-up designs, the suitability of oculo-plastic surgery and for the grading the eye shift. Anatomically incompatible glasses are one of the common problems affecting accommodation, reducing comfort and disturbing by causing symptoms such as dizziness and nausea. The oculo-palpebral measurements act as a key determinant in symmetrical facial attractiveness. This study aims to investigate the most effective oculo-palpebral landmarks, head-neutral as the ideal position, taking into account of individual anatomical differences of these patients. METHODS: 100 females and 100 males aged between 18 and 20 years were photographed. Digital photogrammetric measurements were made with the ImageJ program. Interpupillary and interhelical distances, besides bilateral palpebral fissure length and height, and iris diameter were calculated on front-facing photographs. RESULTS: Mean interpupillary distance was measured wider in males than in females. The mean length of palpebral fissure was 31 mm; palpebral fissure height was 10 mm. These figures were valid in both eyes and gender. The interhelical distance was calculated as the mean and was measured longer in men. Since the measurement values were the same in both sexes and on both sides, they were determined as important landmarks for controlling the head-neutral position, evaluating whether there was a deviation in the eye, and measuring the numerical value when detected. CONCLUSION: It is essential to check the side-symmetry of the patient's palpebral fissure height, palpebral fissure length, diameter of iris and corneal depth during oculo-plastic invention and artificial design.

Anatomical Basis for the Lower Eyelid Rejuvenation.

BACKGROUND: The tear trough, hollow concavity of the lower eyelid, is one of the recognizable signs of facial aging. Anatomical description is essential in improving tear through deformity for facial rejuvenation. METHODS: Fifty cadaver were microdissected. Fat pad types, fat herniation and the fibrous support system of lower lid were investigated. The areas of the fat compartments were compared using photogrammetry method and ImageJ software. RESULTS: Lower lids develop palpebral bags as a result of herniation of orbital fat against a weak orbital septum in all cases (%100). The attachment of the arcus marginalis at the orbital edge is a large contributor to the middle-aged appearance of the midface in all cases (100%). The most common type is Type 1 (36%). In this type, three distinct fat pads were diverged by arcuate expansion at lateral, fascia of the inferior oblique muscle at medial, as central, medial and lateral. Type 2 specimens (20%) were observed with two fat pads. Double convexity contour is in Type 3 cases (%44). It is determined that the medial fat pads are located in larger areas. Also, herniation is particularly evident in the medial and mediocentral fat pads. CONCLUSION: Analysis of the lower lid morphology enables surgeons to apply safe and effective procedures. The inferior oblique muscle and arcuate expansion structures should be supported and not be damaged during surgical interventions. Surgeons should focus mainly on the anatomical data obtained, and in this sense, surgeons apply them during aesthetic and reconstructive procedures of the lower eyelids. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Anatomical description of the upper tarsal plate for reconstruction.

BACKGROUND: Reconstruction of the upper eyelids following traumatic, congenital and tumor surgeries is often difficult owing to a variety of reasons including the influence of the lacrimal system, visual system and aesthetic appearance. In most cases of the reconstruction in the upper eyelid tarsal plate is the main anatomical area that should be protected against the damage. The aim of this study is to investigate the types and the measurements of the tarsal plate of the upper eyelids in Anatolian population. METHODS: Fifty cadaver upper eyelids, tarsal plates were exposed to investigate the location, shape, position and their relationships to the upper eyelid. Their morphometric details such as linear analyses (vertical and horizontal) and ratio analyses were studied. As for the shape of the upper tarsal plate, it was categorized into three distinct types: sickle, trapezoid, and triangular type. RESULTS: The vertical height of the upper tarsal plate was the greatest at the central point 10.6 ± 1.1 mm, followed by the lateral point (7.81 ± 1.0 mm), and medial point (6.2 ± 0.8 mm) medially. The mean medial width of the upper tarsal plate was measured as 37.6 ± 4.1 mm and the lower width as 38.5 ± 4.6 mm. The base-central height ratio of the upper tarsal plate was approximately 0.28. For the upper eyelids, the shapes of tarsal plates were observed as sickle (48%), trapezoid (28%) and triangular (24%). Sickle type was the most frequent upper eyelid type. CONCLUSIONS: Considering the shielding function of the upper eyelid, tarsal plate, serves as fibrocartilaginous skeleton of the upper tarsal plate. In successful lid oculoplastic reconstructive surgery, tarsal plate may be restored by evaluating each patient individually to have symmetrical and youthful eyes. Although sickle tarsal plate is the most frequent type, personalized treatment requires measurement and classification. The findings manifest the necessity of oculoplastic surgical treatment peculiar to each individual. LEVEL OF EVIDENCE: I, Randomized controlled trial.

Study of frontal hairline patterns for natural design and restoration.

OBJECTIVE: Hair loss is one of the most noticeable esthetic problems of the mankind. Hair transplantation has been a highly effective technique in reducing wide foreheads and recontouring the hairline. Creating a natural hairline is one of the most important elements of a successful hair transplant. This study aims at the requirements which are essential in designing hairline morphometrics and natural frontline. METHODS: Standard photographs of the forehead region were obtained from two hundred young Turkish adults participated in this study. The hairline contour was classified into five groups as round, M-shaped, rectangular, bell-shaped and triangular. Measurements of the forehead region, such as the height of the forehead, widths of the forehead and supraorbital region were calculated as reference points. RESULTS: In women, the average height of the forehead was 58.3 ± 6.6 mm, the average width of the forehead and the supraorbital region was 129 ± 14.4 mm and 125.3 ± 13.5 mm, respectively. The incidence of the hairline shapes was seen as; round (28%), M-shaped (19%), rectangular (30%), bell-shaped (5%), or triangular (18%). In men, the average height of the forehead was 61.4 ± 9.7 mm, the average width of the forehead and supraorbital region was 137.1 ± 18 mm and 133.9 ± 15.9 mm, respectively. The hairline contour among young male adults was classified as round in 27%, M-shaped in 46%, rectangular in 31%, bell-shaped in 4% and triangular in 2%. The rectangular and M-shaped hairlines resemble a more masculine appearance, whereas round shaped hairline resembles femininity. CONCLUSION: Ideal reconstruction of scalp defects relies on a comprehensive understanding of scalp anatomy and detailed information of patient factors. The classification of the hairline and measured forehead reference lengths will be beneficial in the correction of wide foreheads. There were significant gender differences in the esthetic rankings of the hairline contour. Compared to women, both of the measured average forehead reference lengths displayed a significantly greater value in men. Our results clearly showed that sex difference affected the predominance of the contour type. The M shape was the most common, and the triangular type was poorly classified in men, whereas the rectangular hairline was the most common type among women.

Digitalized analysis of philtral anatomy for planning individual treatment.

OBJECTIVE: Restoration of the philtral region following traumatic, cleft, and tumor surgeries is often difficult due to influence of this feature to whole facial beauty. The aim of this study is to investigate the types and measurements of the philtrum and its relationship with the upper lip using a software. METHODS: Standard personal photographs of the philtral region were obtained from 200 young adults participated in this study. Linear analyses (the lengths of philtral column and dimple; the philtral width) and angular analyses (apex and central angles of Cupid's bow) were measured as reference points. As for the shape of the philtral column, it was categorized as four distinct types: parallel, triangular, concave, and unclear type. RESULTS: The philtral width was 11.37 ± 1.9 mm in males, 10.21 ± 1.80 mm in females. The length of the philtral dimple was 18.16 ± 3.6 mm in males, 18.16 ± 3.6 mm in females. Compared with women, both of the measured average philtral reference lengths displayed a significantly greater value in men. In the meanwhile, compared to women, the angular measurements of Cupid's bow (i.e., the apex and central angle of Cupid's bow) were smaller in men. It was 127.47 ± 12.74° mm in males, 134.1 ± 11.38° mm in females. The triangular and concave types were associated with a substantial fraction in men, whereas the triangular and parallel types were predominant in women. There were significant gender differences in the esthetic rankings of philtral column shapes. CONCLUSIONS: These results suggest digitalized reference values relative to the philtral column which may increase the success of the individual reconstructive treatment of the surgical procedures and reduce possible asymmetrical appearance. With the help of certain software, this research has made possible to investigate the ideal parameters of philtral construction in defining the best surgical solution for the patient.

Creating vascular models by postprocessing computed tomography angiography images: a guide for anatomical education.

BACKGROUND: A new application of teaching anatomy includes the use of computed tomography angiography (CTA) images to create clinically relevant three-dimensional (3D) printed models. The purpose of this article is to review recent innovations on the process and the application of 3D printed models as a tool for using under and post-graduate medical education. METHODS: Images of aortic arch pattern received by CTA were converted into 3D images using the Google SketchUp free software and were saved in stereolithography format. Using a 3D printer (Makerbot), a model mode polylactic acid material was printed. RESULTS: A two-vessel left aortic arch was identified consisting of the brachiocephalic trunk and left subclavian artery. The life-like 3D models were rotated 360° in all axes in hand. CONCLUSIONS: The early adopters in education and clinical practices have embraced the medical imaging-guided 3D printed anatomical models for their ability to provide tactile feedback and a superior appreciation of visuospatial relationship between the anatomical structures. Printed vascular models are used to assist in preoperative planning, develop intraoperative guidance tools, and to teach patients surgical trainees in surgical practice.

A retrospective comparison of the conventional versus three-dimensional printed model-assisted surgery in the treatment of acetabular fractures.

OBJECTIVE: The aim of this study was to compare the clinical and radiological outcomes of the conventional versus individualized three-dimensional (3D) printing model-assisted pre-contoured plate fixation in the treatment of patients with acetabular fractures. METHODS: The data from 18 consecutive patients who underwent surgery for the acetabular fractures were retrospectively analyzed. The patients were divided into two groups (9 in each): conventional and 3D printed model-assisted. The groups were then compared in terms of the duration of surgery, time of instrumentation, time of intraoperative fluoroscopy, and volume of blood loss. The quality of the fracture reduction was also evaluated postoperatively by radiography and computed tomography in both the groups. The quality of the fracture reduction was defined as good (<2 mm) or fair (>2 mm) based on the amount of displacement in the acetabulum. RESULTS: The conventional group included 9 patients (9 males; mean age=41.7 years; age range=16-70) with a mean follow-up of 11.9 months (range=8-15); the 3D printed model-assisted group consisted of 9 patients (9 males; mean age=46.2 years; age range=30-66) with a mean follow-up of 10.33 months (range=7-17). The average duration of surgery, mean time of instrumentation, time of intraoperative fluoroscopy, and mean volume of blood loss were 180.5±9 minutes, 36.2±3.6 minutes, 6±1 times, and 403.3±52.7 mL in the 3D printed model-assisted group, and 220±15.6 minutes, 57.4±10.65 minutes, 10.4±2.2 times, and 606.6±52.7 mL in the conventional group, respectively. Procedurally, the average duration of surgery, mean time of instrumentation, and mean time of fluoroscopy were significantly shorter, and the mean volume of blood loss was significantly lower in the 3D printed model-assisted group (p<0.05). The quality of the fracture reduction was good in 7 patients (78%) in the conventional group and 8 patients (89%) in the 3D printed model-assisted group. CONCLUSION: As compared with the conventional surgery, the 3D printing model-assisted pre-contoured plate fixation technique can improve the clinical and radiological outcomes of the acetabular fractures, with shorter surgery, instrumentation, intraoperative fluoroscopy times, and blood loss. LEVEL OF EVIDENCE: Level III, Therapeutic study.

Macroscopic observations of muscular bundles of accessory iliopsoas muscle as the cause of femoral nerve compression.

Compression of the femoral nerve (FN) to the iliac fossa has been reported as a consequence of several pathologies as well as due to the aberrant muscles. The purpose of this research was to investigate the patterns of the accessory muscles of iliopsoas muscles and the relationship of the FN in fifty semi pelvis. Accessory muscular slips from iliacus and psoas, piercing or covering the FN, were found in 19 specimens (7.9%). Based on the macroscopic structure, the muscle was categorized into two types. Pattern 1 as the more frequent variation, was sheet muscular type covering the FN (17 specimens, 89.5%). Pattern 2, the less frequent variation was found on a muscular slip covering the FN (2 specimens, 10.5%). Iliac and psoas muscles and their variants on both types were defined. Appraising the relation between the muscle and the nerves, each disposition of the patterns may be a potential risk for nerve entrapment. The knowledge about the possible variations of the iliopsoas muscle complex and the FN may also give surgeons confidence during pelvic surgery. Recognition of these variations in normal anatomy may be useful to the clinicians when treating patients with refractory leg pain.

Multidisciplinary Assessment of Planning and Resection of Complex Bone Tumor Using Patient-Specific 3D Model.

Oncological interventions in thoracic cavity have some important problems such as choice of correct operative approaches depending on the tumor, size, extension, and location. In sarcoma surgery, wide resection should be aimed for the curative surgery. Purpose of this study was to evaluate pre-operative planning of patient-specific thoracic cavity model made by multidisciplinary surgeon team for complex tumor mass for oncological procedures. Patient's scans showed a large mass encroaching on the mediastinum and heart, with erosion of the adjacent ribs and vertebral column. Individual model of this case with thoracic tumor was reconstructed from the DICOM file of the CT data. Surgical team including six interdisciplinary surgeons explained their surgical experience of the use of 3D life-size individual model for guiding surgical treatment. Before patients consented to surgery, each surgeon explained the surgical procedure and perioperative risks to her. A questionnaire was applied to 10 surgical residents to evaluate the 3D model's perception. 3D model scans were useful in determining the site of the lesion, the exact size, extension, attachment to the surrounding structures such as lung, aorta, vertebral column, or vascular involvement, the number of involved ribs, whether the diaphragm was involved also in which order surgeons in the team enter the surgery. 3D model's perception was detected statistical significance as < 0.05. Viewing thoracic cavity with tumor model was more efficient than CT imaging. This case was surgically difficult as it included vital structures such as the mediastinal vessels, aorta, ribs, sternum, and vertebral bodies. A difficult pathology for which 3D model has already been explored to assist anatomic visualization was mediastinal osteosarcoma of the chest wall, diaphragm, and the vertebral column. The study helped to establish safe surgical line wherever the healthy tissue was retained and enabled osteotomy of the affected spinal corpus vertically with posterior-anterior direction by preserving the spinal cord and the spinal nerves above and distal the tumor. 3D tumor model helps to transfer complex anatomical information to surgeons, provide guidance in the pre-operative planning stage, for intra-operative navigation and for surgical collaboration purposes. Total radical excision of the bone tumor and reconstructions of remaining structures using life-size model was the key for successful treatment and better outcomes. The recent explosion in popularity of 3D printing is a testament to the promise of this technology and its profound utility in orthopedic oncological surgery.