Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 7 de 7
Filtrar
Más filtros

Banco de datos
Tipo de estudio
Tipo del documento
Intervalo de año de publicación
1.
Opt Express ; 31(5): 8914-8926, 2023 Feb 27.
Artículo en Inglés | MEDLINE | ID: mdl-36859996

RESUMEN

Ultrafast light sources have become an indispensable tool to access and understand transient phenomenon in material science. However, a simple and easy-to-implement method for harmonic selection, with high transmission efficiency and pulse duration conservation, is still a challenge. Here we showcase and compare two approaches for selecting the desired harmonic from a high harmonic generation source while achieving the above goals. The first approach is the combination of extreme ultraviolet spherical mirrors with transmission filters and the second approach uses a normal-incidence spherical grating. Both solutions target time- and angle-resolved photoemission spectroscopy with photon energies in the 10-20 eV range but are relevant for other experimental techniques as well. The two approaches for harmonic selection are characterized in terms of focusing quality, photon flux, and temporal broadening. It is demonstrated that a focusing grating is able to provide much higher transmission as compared to the mirror+filter approach (3.3 times higher for 10.8 eV and 12.9 times higher for 18.1 eV), with only a slight temporal broadening (6.8% increase) and a somewhat larger spot size (∼30% increase). Overall, our study establishes an experimental perspective on the trade-off between a single grating normal incidence monochromator design and the use of filters. As such, it provides a basis for selecting the most appropriate approach in various fields where an easy-to-implement harmonic selection from high harmonic generation is needed.

2.
Science ; 385(6710): 796-800, 2024 Aug 16.
Artículo en Inglés | MEDLINE | ID: mdl-39146411

RESUMEN

In the underdoped n-type cuprate Nd2-xCexCuO4, long-range antiferromagnetic order reconstructs the Fermi surface, resulting in a putative antiferromagnetic metal with small Fermi pockets. Using angle-resolved photoemission spectroscopy, we observe an anomalous energy gap, an order of magnitude smaller than the antiferromagnetic gap, in a wide portion of the underdoped regime and smoothly connecting to the superconducting gap at optimal doping. After considering all the known ordering tendencies in tandem with the phase diagram, we hypothesize that the normal-state gap in the underdoped n-type cuprates originates from Cooper pairing. The high temperature scale of the normal-state gap raises the prospect of engineering higher transition temperatures in the n-type cuprates comparable to those of the p-type cuprates.

3.
Nat Commun ; 14(1): 7185, 2023 Nov 08.
Artículo en Inglés | MEDLINE | ID: mdl-37938548

RESUMEN

Condensed matter physics has often provided a platform for investigating the interplay between particles and fields in cases that have not been observed in high-energy physics. Here, using angle-resolved photoemission spectroscopy, we provide an example of this by visualizing the electronic structure of a noncentrosymmetric magnetic Weyl semimetal candidate NdAlSi in both the paramagnetic and ferrimagnetic states. We observe surface Fermi arcs and bulk Weyl fermion dispersion as well as the emergence of new Weyl fermions in the ferrimagnetic state. Our results establish NdAlSi as a magnetic Weyl semimetal and provide an experimental observation of ferrimagnetic regulation of Weyl fermions in condensed matter.

4.
Struct Dyn ; 9(2): 024304, 2022 Mar.
Artículo en Inglés | MEDLINE | ID: mdl-35540107

RESUMEN

Here, we present a high repetition rate, narrow bandwidth, extreme ultraviolet photon source for time- and angle-resolved photoemission spectroscopy. The narrow bandwidth pulses Δ E = 9 , 14 , and 18 meV for photon energies h ν = 10.8 , 18.1 , and 25.3 eV are generated through high harmonic generation using ultra-violet drive pulses with relatively long pulse lengths (461 fs). The high harmonic generation setup employs an annular drive beam in tight focusing geometry at a repetition rate of 250 kHz. Photon energy selection is provided by a series of selectable multilayer bandpass mirrors and thin film filters, thus avoiding any time broadening introduced by single grating monochromators. A two stage optical-parametric amplifier provides < 100 fs tunable pump pulses from 0.65 µm to 9 µm. The narrow bandwidth performance of the light source is demonstrated through angle-resolved photoemission measurements on a series of quantum materials, including high-temperature superconductor Bi-2212, WSe2, and graphene.

5.
Sci Rep ; 9(1): 1141, 2019 Feb 04.
Artículo en Inglés | MEDLINE | ID: mdl-30718649

RESUMEN

The K2Cr8O16 compound belongs to a series of quasi-1D compounds with intriguing magnetic properties that are stabilized through a high-pressure synthesis technique. In this study, a muon spin rotation, relaxation and resonance (µ+SR) technique is used to investigate the pressure dependent magnetic properties up to 25 kbar. µ+SR allows for measurements in true zero applied field and hereby access the true intrinsic material properties. As a result, a refined temperature/pressure phase diagram is presented revealing a novel low temperature/high pressure (pC1 = 21 kbar) transition from a ferromagnetic insulating to a high-pressure antiferromagnetic insulator. Finally, the current study also indicates the possible presence of a quantum critical point at pC2 ~ 33 kbar where the magnetic order in K2Cr8O16 is expected to be fully suppressed even at T = 0 K.

6.
ACS Nano ; 12(1): 617-626, 2018 01 23.
Artículo en Inglés | MEDLINE | ID: mdl-29251489

RESUMEN

The "double Dirac cone" 2D topological interface states found on the (001) faces of topological crystalline insulators such as Pb1-xSnxSe feature degeneracies located away from time reversal invariant momenta and are a manifestation of both mirror symmetry protection and valley interactions. Similar shifted degeneracies in 1D interface states have been highlighted as a potential basis for a topological transistor, but realizing such a device will require a detailed understanding of the intervalley physics involved. In addition, the operation of this or similar devices outside of ultrahigh vacuum will require encapsulation, and the consequences of this for the topological interface state must be understood. Here we address both topics for the case of 2D surface states using angle-resolved photoemission spectroscopy. We examine bulk Pb1-xSnxSe(001) crystals overgrown with PbSe, realizing trivial/topological heterostructures. We demonstrate that the valley interaction that splits the two Dirac cones at each X̅ is extremely sensitive to atomic-scale details of the surface, exhibiting non-monotonic changes as PbSe deposition proceeds. This includes an apparent total collapse of the splitting for sub-monolayer coverage, eliminating the Lifshitz transition. For a large overlayer thickness we observe quantized PbSe states, possibly reflecting a symmetry confinement mechanism at the buried topological interface.

7.
Rev Sci Instrum ; 78(7): 076103, 2007 Jul.
Artículo en Inglés | MEDLINE | ID: mdl-17672802

RESUMEN

An on-board sample cleaver has been developed in order to cleave small and hard-to-cleave samples. To acquire good cleaves from rigid samples the alignment of the cleaving blade with respect to the internal crystallographic planes is crucial. To have the opportunity to mount the sample and align it to the blade ex situ has many advantages. The design presented has allowed us to cleave very tiny and rigid samples, e.g., the high-temperature superconductor La((2-x))Sr(x)CuO(4). Further, in this design the sample and the cleaver will have the same temperature, allowing us to cleave and keep the sample at low temperature. This is a big advantage over prior cleaver systems. As a result, better surfaces and alignments can be realized, which considerably simplifies and improves the experiments.


Asunto(s)
Ensayo de Materiales/instrumentación , Microtomía/instrumentación , Manejo de Especímenes/instrumentación , Diseño de Equipo , Análisis de Falla de Equipo , Ensayo de Materiales/métodos , Microtomía/métodos , Miniaturización , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Manejo de Especímenes/métodos , Integración de Sistemas
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA