Improving lithium-ion cells by replacing polyethylene terephthalate jellyroll tape.

Polyethylene terephthalate (PET) tape is widely used by well-known lithium-ion battery manufacturers to prevent electrode stacks from unwinding during assembly. PET tape is selected since it has suitable mechanical and electrical properties, but its chemical stability has been largely overlooked. In the absence of effective electrolyte additives, PET can depolymerize into its monomer dimethyl terephthalate, which is an unwanted redox shuttle that induces substantial self-discharge in a lithium-ion cell. This study presents a chemical screening experiment to probe the PET decomposition mechanism involving in situ generated methanol and lithium methoxide from dimethyl carbonate, one of the most common electrolyte solvents in lithium-ion cells. By screening other polymers, it is found that polypropylene and polyimide (Kapton) are stable in the electrolyte. Finally, it is demonstrated that reversible self-discharge of LiFePO4-graphite cells can be virtually eliminated by replacing PET jellyroll tape with chemically stable polypropylene tape.

Peat-Derived ZnCl2-Activated Ultramicroporous Carbon Materials for Hydrogen Adsorption.

Highly microporous adsorbents have been under considerable scrutiny for efficient adsorptive storage of H2. Of specific interest are sustainable, chemically activated, microporous carbon adsorbents, especially from renewable and organic precursor materials. In this article, six peat-derived microporous carbon materials were synthesized by chemical activation with ZnCl2. N2 and CO2 gas adsorption data were measured and simultaneously fitted with the 2D-NLDFT-HS model. Thus, based on the obtained results, the use of a low ratio of ZnCl2 for chemical activation of peat-derived carbon yields highly ultramicroporous carbons which are able to adsorb up to 83% of the maximal adsorbed amount of adsorbed H2 already at 1 bar at 77 K. This is accompanied by the high ratio of micropores, 99%, even at high specific surface area of 1260 m2 g-1, exhibited by the peat-derived carbon activated at 973 K using a 1:2 ZnCl2 to peat mass ratio. These results show the potential of using low concentrations of ZnCl2 as an activating agent to synthesize highly ultramicroporous carbon materials with suitable pore characteristics for the efficient low-pressure adsorption of H2.