Dental caries in HIV-infected children and adolescents: A systematic review with meta-analysis.

This study aimed to evaluate and compare the risk of dental caries in between human immunodeficiency virus (HIV)-infected and uninfected children and adolescents. An electronic search was performed on PubMed/MEDLINE, Web-of-Science, Scopus, LILACS, ProQuest, and ClinicalTrials.gov up to May 2022. The critical appraisal checklist developed by the Joanna Briggs Institute was used to evaluate the quality of the included studies. Meta-analysis was performed using the RevMan 5.4. Sixteen studies were included. A total of 3231 participants were evaluated, including 1701 and 1530 HIV-infected and uninfected children and adolescents, respectively. The meta-analysis revealed a higher risk of dental caries for primary dentitions in HIV-infected children and adolescents by decayed, missing, filled tooth (dmft) (SMD:0.34; p = 0.006) and decayed, missing, filled surface (dmfs) scores (SMD:0.37; p = 0.001). Similar results were observed for permanent dentition, with increased dental caries in HIV-infected children and adolescents with DMFT (SMD:0.32; p = 0.003) and DMFS (SMD:1.78; p < 0.0001) scores. Regarding the quality assessment, most of the included studies were moderate or good quality. However, the certainty of the evidence of the outcomes was very low. This systematic review and meta-analysis showed higher caries severity in permanent and deciduous teeth among HIV-infected children and adolescents.

Missed canals in endodontically treated maxillary molars of a Brazilian subpopulation: prevalence and association with periapical lesion using cone-beam computed tomography.

OBJECTIVES: To evaluate the prevalence of missed canals in endodontically treated maxillary molars through cone-beam computed tomography (CBCT) images and to verify their association with the presence of periapical lesions. MATERIAL AND METHODS: Three oral radiologists evaluated 633 maxillary molars in CBCT exams regarding number of roots, number of root canals, number of missed canals, anatomic identification of missed canals, presence of periapical lesions, and root location of the periapical lesions. Data were statistically analyzed at a 5% significance level. RESULTS: Descriptive statistical analysis showed that among 395 first molars, 218 had at least one missed canal, and 186 (46.5%) had a missed canal and periapical lesion simultaneously. Of these, 72.4% (134) of the missed canals were only mesiobuccal 2 (MB2). Among 238 s molars evaluated, 121 presented at least one missed canal, and 104 (43.6%) had a missed canal and periapical lesion simultaneously. Of these, 81.7% (85) of the missed canals were only MB2. The chi-squared test showed an association between the presence of missed canals and periapical lesions for 1st and 2nd maxillary molars. Teeth that presented a missed canal showed an odds ratio (OR) of 2.57 (p < 0.0001) of being associated with a periapical lesion. Missed canal occurrence was positively related to the number of root canals (z = 13.06, p < 0.0001), meaning when the number of root canals is higher, there is a higher probability of missed canal occurrence. According to the model calculated prediction, for a one-unit increase in the number of canals, the probability of missed canals increases by 4.22%. CONCLUSIONS: It was concluded that MB2 was the most frequently missed canal, associated with the presence of periapical lesions in endodontically treated maxillary molars. CLINICAL RELEVANCE: Professionals' negligence of anatomical root variations has been contributed to the high prevalence of missed canals, leading to failures in endodontic treatment. Their association with periapical lesion occurrence emphasizes the importance of correct detection and instrumentation of these canals.

Morphometric analysis of the mandibular fossa in dentate and edentulous patients: A cone beam computed tomography study.

STATEMENT OF PROBLEM: Mandibular fossa roof thickness and lateral inclination could be associated with the presence of bone changes in the mandibular condyle in dentate and edentulous patients. However, literature regarding the relationship between the presence and absence of teeth and the morphologic features of the temporomandibular joint is lacking. This knowledge could provide a better understanding of changes affecting the correct functioning of the stomatognathic system. PURPOSE: The purpose of this clinical study was to assess the mandibular fossa roof thickness and lateral inclination in relation to sex, presence or absence of teeth, and bone changes in the mandibular condyle through cone beam computed tomography (CBCT). MATERIAL AND METHODS: CBCT scans of 100 individuals (50 dentate and 50 edentulous) were evaluated in terms of mandibular fossa roof thickness and lateral inclination. Bone changes in the mandibular condyle were classified dichotomously in relation to osteophytes, erosion, sclerosis, and flattening. Differences were assessed with the Student t test, the chi-square test, and 2-way analysis of variance (ANOVA), with Tukey post hoc tests (α=.05). RESULTS: Sex was not related to mandibular fossa measurements. Edentulous participants showed a higher mandibular fossa lateral inclination (P<.001) and lower roof thickness (P=.001) than dentate participants. When the association between bone changes in the mandibular condyle was evaluated in dentate and edentulous groups, only sclerosis showed a statistically significant association (P<.001). The 2-way ANOVA showed that the mandibular fossa roof thickness was lower in edentulous participants in the presence of flattening and erosion and that the mandibular fossa lateral inclination was higher in the presence of osteophytes, erosion, and sclerosis (P<.001). Among dentate participants, the mandibular fossa lateral inclination was higher in the presence of flattening (P=.024). CONCLUSIONS: Mandibular fossa roof thickness and lateral inclination are not associated with sex. However, tooth absence and bone changes in the mandibular condyle are related to mandibular fossa measurements.

Probability of oral complications of radiotherapy and chemotherapy for head and neck cancer.

The objective of this study was to investigate the relationship between antineoplastic treatments and oral complications in patients with head and neck cancer. Medical records from 400 patients treated at a cancer center were analyzed. Univariable analysis was initially performed to verify the association between the variables and the presence of oral complications. Multivariable analysis was performed using multiple linear regression to assess the association between the type of treatment performed and the presence and types of oral complications. The medical records of 290 patients included information about the presence or absence of oral complications of therapy, and 199 of these patients experienced oral complications. An average of 1 oral complication per patient was found; 104 patients experienced 1 complication, 74 patients experienced 2 complications, and 21 patients experienced 3 or 4 complications. Oral complications were correlated with tobacco use (P = 0.01), alcohol use (P = 0.006), radiotherapy (P = 0.000), and chemotherapy (P = 0.028). The association between oral complications and radiotherapy was greater than the association between oral complications and chemotherapy, but the risk increased when both therapies were performed (odds ratio [OR] = 4.41; P = 0.004). Mucositis was associated with both radiotherapy and chemotherapy, and the incidence increased when both types of treatment were combined (OR = 5.28; P = 0.001). Oral complications of antineoplastic therapy are related to lifestyle habits and treatment modalities. Clinicians should educate patients with head and neck cancer about the role of lifestyle habits in possible adverse treatment effects and consider a more careful approach to follow-up care of patients who are undergoing both radiotherapy and chemotherapy.

Anatomical evaluation of the relationship between the maxillary posterior teeth and maxillary sinus.

Knowledge of the anatomical relationships between the maxillary sinus (MS) and posterior teeth is important to prevent complications when endodontic or oral surgical procedures are performed. The aim of this study was to evaluate the relationships between the root apices of maxillary posterior teeth and the MS floor. Three oral radiologists evaluated 851 posterior teeth (1969 roots) imaged with cone beam computed tomography. The roots were analyzed individually in parasagittal sections, on which the most superior point of the apex was observed. A qualitative evaluation was performed, and each root was assigned a proximity score: 1, root invaginating the MS; 2, root in close contact with the MS floor; 3, root with no relationship with the MS; and 4, root with a measurable proximity to the MS. For roots classified as score 4, the distance to the MS floor was measured (quantitative analysis). Student t tests, 1-way analysis of variance, and simple linear regression analysis were performed (P < 0.05). The qualitative analysis revealed that the mesiobuccal root of the second molar had a pronounced proximity to the MS. The quantitative analysis revealed no differences in distance to the MS between right and left posterior teeth or between the different roots of the same tooth. In relation to the MS, the second molar was positioned closest, followed by the first molar, second premolar, and first premolar. Except for the comparison between mean distances of the second premolar and first molar (P = 0.11), the differences between groups of teeth were statistically significant (P < 0.05). Simple linear regression analysis showed that the more posterior the tooth was in relation to the midline, the shorter the mean distance from the root apex to the MS floor (P < 0.05). The mesiobuccal roots of second molars were closest to the MS. Second molars exhibited the shortest distances between their root apices and the MS and the greatest number of roots that were invaginating or in close contact with the MS. Therefore, second molars require special attention when endodontic or oral surgical approaches involve those regions.

Double mandibular canal and triple mental foramina: detection of multiple anatomical variations in a single patient.

Having complete information about a patient's mandibular canal and mental foramen is fundamental to performing safer procedures and avoiding intraoperative and postoperative complications. Cone beam computed tomography (CBCT) produces accurate images for the analysis of maxillomandibular bone structures and is widely used in dentistry. The aim of this study is to report a case of mandibular bifid canal associated with triple mental foramina that was revealed with CBCT images. A 45-year-old woman was referred for a CBCT scan of remaining bone quantity to assist in preoperative implant planning. The patient had reported problems related to anesthesia during extraction of the mandibular right second and third molars. Examination showed bilateral bifurcation of the mandibular canal, from the mandibular foramen to the gonial angle. In addition, exteriorization of the mandibular canal was noticed in 3 regions; that is, there were 3 distinct mental foramina. Clinicians must be aware of these anatomical variations in the mandibular region during dental procedures to avoid complications such as difficulty in obtaining anesthesia or postoperative sensory dysfunction.

Foreign bodies in the interior of the maxillary sinus: diagnosis by cone beam computed tomography.

To avoid complications, the intimate relation between the maxillary sinus and dental roots deserves attention during surgical procedures. Accidental introduction of foreign bodies, such as dental implants, may irritate the maxillary sinus mucosa, causing sinusitis. Cone beam computed tomography (CBCT) has been proven to be suitable for diagnosis in these cases by providing the exact location of the foreign body. The present article reports 3 cases of foreign bodies inside the maxillary sinus associated with inflammatory processes. Imaging examinations, such as CBCT, are an important tool to assist dentists in diagnosing the presence of foreign bodies in the interior of the maxillary sinus.

Detection of an unusual inverted schneiderian papilloma by cone beam computed tomography.

An inverted schneiderian papilloma (ISP) is a rare neoplasm that affects the nasal cavity or a paranasal sinus, especially the maxillary sinus. Although histologically benign, the lesion has a high potential for local destruction, has a high recurrence rate, and presents the possibility of malignant transformation into squamous cell carcinoma. To determine the extent of the injury and possible impairment of adjacent maxillofacial structures, accurate imaging, such as cone beam computed tomography (CBCT), is necessary. A 47-year-old man reported a nasal obstruction on the right side of his face, signs of oroantral communication, and facial asymmetry. The CBCT examination revealed an extensive lesion of mixed density and irregular contours involving the entire right maxillary sinus and nasal cavity. The association between the clinical signs and symptoms and the tomographic features of the lesion resulted in a differential diagnosis of an ISP, which was confirmed through histopathologic examination. This case report confirms that CBCT is a valuable method for the detection of pathologic alterations affecting the maxillary sinus, especially ISPs.

Development of estimation models of bone height considering the potential presence of anterior extension of the mandibular canal.

PURPOSE: To evaluate the presence of the anterior extension (AE) of the mandibular canal and to measure the bone height (BH) at different points along the extension. MATERIALS AND METHODS: Cone-beam computed tomography examinations of 108 patients were bilaterally evaluated regarding the presence of the AE, and linear measurements of the AE and BH were obtained. For comparisons between sides and genders, Student t test was applied. Variations in BH measurements were assessed by a 2-way analysis of variance. Through a simple linear regression analysis, formulas were determined for calculations of the BH in the AE. RESULTS: A right AE was detected in 76.9% and left AE in 77.8% of the samples. In the majority of the cases, the extension was of the rectilinear type. The mean length of the AE was 8.5 mm, and there was no statistically significant difference observed in relation to gender or side. It was observed that the BH increases as it approaches the midline. CONCLUSION: The AE of the mandibular canal must be evaluated during presurgical planning. The formulae presented in this study provide a method to calculate BH values in the interforaminal region and can be used to assist in presurgical planning, especially in the cases in which the identification of the hipodense site, which corresponds to the AE, is not evident.

Is the assessment of the mandibular molar danger zone affected by field of view and voxel size in cone beam computed tomography examinations?

OBJECTIVE: To verify if assessment of the danger zone (DZ) in the mesial root of mandibular molars is affected by field of view (FOV) and voxel sizes in cone beam computed tomography (CBCT) scans. STUDY DESIGN: Forty mandibular molars were scanned by micro-computed tomography, creating the reference standard. The teeth were then submitted for CBCT scans with FOVs of 10 × 5.5 cm and 5 × 5.5 cm and voxel sizes of 0.4, 0.2, 0.15, and 0.075 mm3. The smallest dentin thickness in the DZ from the mesiobuccal and mesiolingual canals was measured at 2, 4, and 6 mm apical to the root furcation. Descriptive statistics, paired t-tests, and intraclass correlation coefficients were used for statistical analysis with significance established at P < .05. RESULTS: All CBCT measurements overestimated the DZ dentin thickness (P < .001) compared to the reference standard. The greatest overestimation occurred in the 5 × 5.5 cm FOV with 0.4 mm3 voxels (P = .007). Dentin thickness measured with the 5 × 5.5 cm FOV and 0.075 mm3 voxels was significantly smaller and produced the best ICC value with the reference standard (0.936). CONCLUSIONS: CBCT overestimates the dentin thickness of the DZ regardless of FOV and voxel sizes. The 5 × 5.5 cm FOV showed the best performance with the 0.075 mm3 voxel size, but it performed poorly with 0.4 mm3 voxels.

Assessing the Impact of the Metal Artifact Reduction Tool on Detecting Furcation Lesions in Maxillary Molars with Different Intracanal Posts: An Ex Vivo Cone-beam Computed Tomography Study.

INTRODUCTION: Considering the potential image compromise and diagnostic challenges posed by metals, this study aimed to assess the efficacy of the metal artifact reduction (MAR) tool in cone-beam computed tomography examinations for detecting furcation lesions in upper molars treated endodontically and restored with different intracanal posts. METHODS: This ex vivo study used 45 endodontically treated maxillary first molars, categorized into the following3 groups (n = 15): control (without intracanal post), metal post, and fiberglass post. Simulations were conducted in the laboratory to replicate alveolar bone, periodontal ligament, and grade I, II, and III furcation lesions. Cone-beam computed tomography scans were obtained with and without the MAR tool, and the furcation lesions were evaluated considering a 5-point Likert scale. Data were analyzed at 5%. RESULTS: In the control group, there was no influence of MAR (P > .05); grade II lesions were not diagnosed, and grade III lesions were the most detected (P < .05). In the metal post group with MAR, grade III lesions were diagnosed more frequently than I and II (P < .05) and grade III without MAR (P < .05). In the fiberglass post group, the diagnosis of grade I lesions decreased with MAR (P < .05), and without MAR, grade III was most diagnosed (P < .05); grade III lesions were the most diagnosed (P < .05). CONCLUSIONS: The MAR tool was only effective for diagnosing grade III furcation lesions, regardless of the intracanal material. Its application for grade I and II lesions did not contribute to improved diagnosis. Furthermore, in the fiberglass post group with grade I lesions, the MAR tool negatively affected the detection of the lesions.

Fracture resistance of weakened roots restored with relined or milled CAD-CAM glass fiber posts.

This in vitro study compared the fracture resistance of weakened roots restored with milled or relined glass fiber post (GFP). Seventy bovine incisors were divided into seven groups, according to the weakening protocol (none: control; medium-weakened: MW; highly-weakened: HW) and post anatomization technique (non-relined, relined with Bulk Fill or Z350 resin; milled GFP: M). Roots were thermomechanical cycled and submitted to compression. Frequencies and groups were compared by the chi-square test and two-factor ANOVA, Tukey's, and t-test (α=5%). The HW-M obtained the lowest values, showing significant differences compared to all groups (p<0.001). The highest value was HW-Bulk fill, with significant difference compared to MW-M (p=0.037) and HW-M (p<0.001). The frequency of repairable fractures was 100% in the control, 87%, and 63% in the MW and HW, respectively. Relined or milled GFPs can be considered to rehabilitate weakened teeth since failure patterns were predominantly repairable in all groups.

Associated oral manifestations with HIV southeastern Brazilian patients on antiretroviral therapy.

OBJECTIVES: This study aimed to assess the prevalence of oral lesions in patients living with HIV infection and their association with CD4 count, viral load, and antiretroviral therapy in patients with HIV. METHODS: A cross-sectional study was conducted on a sample of 161 patients attending the… All the patients were examined for their oral lesions, current CD4 counts, type, and duration of the therapy. Data analyses were carried out using Chi-Square, Student T/Mann-Whitney, and logistic regression tests. RESULTS: Oral lesions were observed in 58.39% of patients with HIV. Periodontal disease with 78 (48.45%) or without mobility 79 (49.07%) was observed more frequently, followed by hyperpigmentation of oral mucosa 23 (14.29%), Linear Gingival Erythema (LGE) 15 (9.32%), candidiasis pseudomembranous 14 (8.70%). Oral Hairy Leukoplakia (OHL) was observed only in 3 (1.86%). A relationship between periodontal disease with dental mobility and smoking was found (p=0.04), as well duration of treatment (p=1.53e-3) and age (p=0.02). Hyperpigmentation was related to race (p=0.01) and smoking (p=1.30e-6). CD4 count, CD4:CD8 ratio, viral load, or type of treatment were not associated with oral lesions. Logistic regression showed that the duration of treatment has a protective effect on the periodontal disease with dental mobility (OR = 0.28 [-2.27 to -0.25]; p-value=0.03), independent of age or smoking. To hyperpigmentation, the best model included smoking (OR=8.47 [1.18-3.10], p= 1.31e-5), without race or type and duration of treatment. CONCLUSION: Among HIV patients undergoing antiretroviral treatment, oral lesions can be observed, predominantly periodontal disease. Pseudomembranous candidiasis and oral hairy leukoplakia were also observed. No relationship was found between associated oral manifestations in HIV patients and the start of the treatment, TCD4+ and TCD8+ cell count, TCD4:TCD8 ratio, or viral load. The data indicate that there is a protective effect of duration of treatment with relation to periodontal disease with mobility and that hyperpigmentation seems to be more related to smoking than type and duration of treatment. LEVEL OF EVIDENCE: Level 3 (OCEBM Levels of Evidence Working Group*. "The Oxford 2011 Levels of Evidence").

Evaluation of Alveolar Bone Dimensions and Root Positioning of Anterior Teeth in the Maxilla.

Buccal bone walls present significant resorption after tooth extraction, possibly related to the smaller bone thickness, length, and the sagittal position of the root, as well as the bone morphology. The goal of the present study was to measure the thickness of the cortical bone of the vestibular and palatal walls in the anterior maxilla by means of CBCT images. Measurements were taken from CBCT scans of 300 maxillary anterior teeth from 50 patients (25 women, 25 men) aged 18 to 30 years. The parameters evaluated included the thickness of the buccal and palatal cortical bone in the cervical, apical, and middle thirds of the root, as well as six specific angular measurements from each tooth. The lateral incisors showed a significant difference in thickness between each of the buccal and palatal thirds, and measurements were also significantly smaller than the central and canine incisors. Bone anatomy is tooth-and location-specific, and thus the sagittal root position within the alveolus influences the regional bone morphology and may explain the gingival zenith position in the anterior maxilla. These specific buccal and palatal anatomic parameters should be carefully taken into consideration for surgical planning and intervention in the esthetic area.

Assessment of the Metal Artifact Reduction Tool for the Detection of Root Isthmus in Mandibular Molars with Intraradicular Posts in Cone-beam Computed Tomographic Scans.

INTRODUCTION: This study evaluated the performance of the metal artifact reduction (MAR) tool in cone-beam computed tomographic scans using different fields of view (FOVs) in the detection of a root isthmus in mandibular molars with intraradicular posts. METHODS: Twenty-eight teeth were scanned by micro-computed tomographic imaging (gold standard images). Thereafter, specimens were allocated into the following groups: gutta-percha (teeth without posts, n = 10), a prefabricated metal post (n = 9), and a fiberglass post (n = 9). Cone-beam computed tomographic scans were taken using 8 acquisition protocols, varying the size of the FOV (10 × 5.5 cm and 5 × 5.5 cm) and the MAR tool (disabled, low, normal, and high modes). A root isthmus was evaluated considering a 5-point scale. Data were analyzed considering a 5% significance level. RESULTS: Intra- and interexaminer agreement varied from moderate to substantial. The frequency of correct diagnosis varied significantly in all groups regardless of the image acquisition protocol selected (P < .05). In the gutta-percha group, there was no difference in the accuracy, sensitivity, and specificity values between the tested protocols. In the metal and fiberglass post groups, the accuracy values were higher with the "disabled" and "low" modes of the MAR tool regardless of the FOV size. This was also observed for the sensitivity values in the metal post group (P < .05). CONCLUSIONS: The size of the FOV did not affect the performance of the MAR tool in the diagnosis of a root isthmus in molars with intraradicular posts. Our findings suggest that the use of the tool in the "normal" and "high" modes is contraindicated for this purpose.

Reliability of panoramic radiography in predicting proximity of third molars to the mandibular canal: A comparison using cone-beam computed tomography.

PURPOSE: The purpose of this study was to analyze the reliability of 7 panoramic radiographic signs for predicting proximity of the root apices of mandibular third molars to the mandibular canal using cone-beam computed tomography and to correlate these findings with the Pell and Gregory and the Winter classification systems. MATERIALS AND METHODS: An observational, cross-sectional, descriptive study was conducted on 74 patients with bilateral impacted mandibular third molars. Four panoramic radiographic signs were observed in the tooth root (darkening, deflection, and narrowing of the root apices, and bifid apices), and another 3 in the mandibular canal (diversion, narrowing, and interruption of the mandibular canal). Cone-beam computed tomography images were analyzed to identify disruption and diversion of the mandibular canal and root deflection. RESULTS: Binary logistic regression showed that only 4 of the 7 panoramic radiographic signs were able to predict proximity of the root apices of the mandibular third molars to the mandibular canal: darkening of the root, deflection of the root, narrowing of the root, and interruption of the mandibular canal (P<0.05). CONCLUSION: Darkening, deflection, and narrowing of the root, in tandem with the interruption of the mandibular canal on panoramic radiographs, indicate that cone-beam computed tomography should be performed when planning the extraction of impacted mandibular third molars. Proximity between mandibular third molars and the mandibular canal is correlated with the Winter classification.

Evaluation of different teaching methods in the radiographic diagnosis of proximal carious lesions.

OBJECTIVES: To evaluate four different teaching methodologies in the radiographic diagnosis of proximal carious lesions and in the students' perception of these methodologies. METHODS: 71 undergraduate dental students were subdivided into 4 groups according to the teaching methodologies used (traditional, hybrid, e-learning and problem-based learning). All methods were applied by two properly trained researchers. Initially, students completed a pre-methodology test (index test). After applying the teaching methodologies, the students were submitted to a post-methodology test containing periapical radiographs for evaluation of proximal carious lesions. Then, the students answered a questionnaire to verify their perception of the different teaching methodologies. Statistical analysis was done. RESULTS: There were no relationship between the results of pre- and post-methodologies tests, irrespective of the teaching methodology employed (p > 0.05). No differences between the teaching methodologies studied (p > 0.05) were found regarding the amount of correct answers. However, the students who participated in the active (e-learning and problem-based learning) and hybrid teaching methodology reported a positive impact in relation to their diagnostic skills at the questionnaire. CONCLUSIONS: All the tested methodologies had a similar performance; however, the traditional methodology showed less acceptance by the students when analyzed subjectively and comparatively. The results of the present study increase comprehension about teaching methodologies for radiographic diagnosis of proximal carious lesions, and there is a potential to build on the knowledge base and provide practical support for students and educators.

Intra-articular calcifications of the temporomandibular joint and associations with degenerative bone alterations.

PURPOSE: The purpose of this study was to use cone-beam computed tomography (CBCT) images to determine the prevalence of calcifications in the temporomandibular joint (TMJ) and to evaluate any associations between the presence of such calcifications and degenerative bone alterations of the TMJ, sex, or age. MATERIALS AND METHODS: In this retrospective study, 1,058 CBCT exams were analyzed, and data regarding the presence and quantity of calcifications, the affected side, any degenerative alterations of the condyle, sex, and age were collected. To evaluate associations between the presence of calcifications and sex or age, the Fisher exact test or the Spearman correlation coefficient, respectively, was used. To assess the association between the presence of calcifications and joint bone alterations, the chi-square and Fisher exact tests were used. The significance level adopted was 5% (P<0.05). RESULTS: Twenty-eight patients (2.7%) presented with TMJ calcifications, including 23 women (82.1%) and 5 men (17.9%). Significant correlations were found between the presence of calcifications and age (P<0.05) and between the presence of calcifications and the presence of condylar alterations (P<0.05), with 73.2% of patients with bone alterations having TMJ calcifications. CONCLUSION: It may be concluded that, although rare (with a prevalence of only 2.7%), intra-articular calcifications are associated with both degenerative bone alterations and age.

Dental students' ability to detect maxillary sinus abnormalities: A comparison between panoramic radiography and cone-beam computed tomography.

PURPOSE: To compare the diagnostic ability of undergraduate dental students to detect maxillary sinus abnormalities in panoramic radiographs (PR) and cone-beam computed tomography (CBCT). MATERIALS AND METHODS: This was a retrospective study based on the evaluation of PR and CBCT images. A pilot study was conducted to determine the number of students eligible to participate in the study. The images were evaluated by 2 students, and 280 maxillary sinuses were assessed using the following categories: normal, mucosal thickening, sinus polyp, antral pseudocyst, nonspecific opacification, periostitis, antrolith, and antrolith associated with mucosal thickening. The reference standard was established by the consensus of 2 oral radiologists based on the CBCT images. The kappa test, receiver operating characteristic curves, and 1-way analysis of variance with the Tukey-Kramer post-hoc test were employed. RESULTS: Intraobserver and interobserver reliability showed agreement ranging from substantial (0.809) to almost perfect (0.922). The agreement between the students' evaluations and the reference standard was reasonable (0.258) for PR and substantial (0.692) for CBCT. Comparisons of values of sensitivity, specificity, and accuracy showed that CBCT was significantly better (P<0.05). CONCLUSION: CBCT was better than PR for the detection of maxillary sinus abnormalities by dental students. However, CBCT should only be requested after a careful analysis of PR by students and more experienced professionals.

Feasibility of iterative closest point algorithm for accuracy between virtual surgical planning and orthognathic surgery outcomes.

PURPOSE: To evaluate the feasibility of iterative closest point (ICP) algorithm for assessing the accuracy between virtual surgical planning (VSP) and outcomes in orthognathic surgery. MATERIALS AND METHODS: VSP and results of surface mesh (SM0 and SM1) from CBCT scans of 25 patients who had been undergone bi-maxillary orthognathic surgery were converted into STL-format files and then imported to Geomagic software for semi-automatic alignment. ICP algorithm was used to calculate mean deviations (MD) and root mean square (3D error) at different calibrations of ±2 mm (T1), ±5 mm (T2) and ±10 mm (T3), with workflow being performed by two evaluators. Colour maps were generated to assess the 3D congruence qualitatively. Linear regression analysis was used to estimate whether SM0 or SM1 could condition the ICP and t-tests were used to assess whether MD and 3D error values were ≤-2 mm and ≥2 mm. Descriptive statistics was used to assess the method's feasibility by comparing T2 to T1 and T3. RESULTS: High intra- and inter-rater correlations supported the workflow reproducibility with the software. SM0 conditioned the ICP algorithm regarding both evaluators, and t-tests demonstrated that MD and 3D error were >-2 mm and <2 mm. MD and 3D error at T3 were 30% higher than those at T1. CONCLUSIONS: ICP algorithm provided a reproducible method, but its feasibility was limited due to underestimation or overestimation of the results as they affect the validity of the actual deviations.