Solvent-Free Secondary Growth of Highly b-Oriented MFI Zeolite Films from Anhydrous Synthetic Powder.

Up to date, zeolite films have been mainly fabricated by in situ crystallization, secondary growth in a solution/hydrogel, or occasionally by vapor phase transformation of dry gel. Here we demonstrate for the first time a solvent-free secondary growth method for b-oriented silica MFI zeolite films using the synthetic powder from ground anhydrous raw solids in the presence of NH4F. Typically, precisely b-oriented MFI zeolite films are synthesized from seed layers of highly b-oriented MFI zeolite crystals in the synthetic powder of 1SiO2:0.035TPABr:0.05NH4F at 175 °C for 6 h. If needed, b-oriented MFI zeolite multilayer films can be acquired by changing the synthesis time or the amount of NH4F in the synthetic powder. Compared with the traditional hydrothermal synthesis, the approach developed here may provide a new avenue for fabricating high quality zeolite films/membranes.

Fabrication of b-Oriented MFI Zeolite Films under Neutral Conditions without the Use of Hydrogen Fluoride.

The fabrication of MFI zeolite films with particular b-axis orientation is especially fascinating. Unlike the conventional alkaline or hydrofluoric acid (HF) assisted neutral synthesis route, here we develop a novel neutral synthesis solution system of TPABr/fumed silica/H2 O without the use of HF and successfully synthesize highly b-oriented MFI zeolite films on glass-plate substrates by secondary growth. The localized weak alkaline environment created by the dissolved Na2 O species from the substrate is identified as the key factor for the depolymerization of fumed silica and subsequently the in-plane growth of zeolite seed layers. Continuous b-oriented MFI films can also be synthesized on other substrates in the presence of a glass plate or a trace amount of NaOH, which making our neutral synthesis route promising for the direct synthesis of MFI zeolite films and membranes on various substrates.

Fabrication of b-Oriented MFI Zeolite Membranes by a Printing-Transfer Seed Layer Procedure.

Highly b-oriented MFI zeolite (abbreviated as BOMZ) membranes are attractive due to less grain boundary defects and straight channels normal to the substrate, enhancing selectivity and flux in membrane separation. Herein, we demonstrate a novel, effective and easily-amplified printing-transfer oriented-seed-layer technique to manufacture uniform BOMZ seed monolayer on porous supports. Furthermore, a facile and effective approach for the synthesis of highly BOMZ membranes by introducing poly(hexamethylene biguanide) hydrochloride as a twin crystal inhibitor during seeded growth is demonstrated. Well-intergrown BOMZ membranes (∼650 nm thick) obtained on porous Al2 O3 supports show a flux of 2.8 kg m-2 h-1 with a separation factor as high as 71 for pervaporation in the 60 °C feed of EtOH/H2 O (5 wt%), which is much higher than those of random membranes. The developed seed assembly technique on porous supports underlines great potential for facile preparation of oriented seed layers on porous supports.

Analysis of vaccine-like lumpy skin disease virus from flies near the western border of China.

Lumpy skin disease (LSD) is a devastating viral disease that occurs in cattle. In China, it was first detected in the Xin-Jiang autonomous region, near the border with Kazakhstan, in August 2019. As there were no new occurrences of LSD in either country following the first detection, the initial introduction of the virus remains unknown. Arthropod vectors were considered as potential vectors. Consequently, to identify the arthropod vectors involved in transmitting LSD virus (LSDV), an insect surveillance campaign was launched at four different sites scattered along the border, and samples from 22 flying insect species were collected and subjected to PCR assays. Following the Agianniotaki LSDV vaccine and Sprygin's general LSDV assays, two kinds of non-biting flies, namely, Musca domestica L and Muscina stabulans, were positive for LSDV. However, all the other insects tested negative. Viral DNA was only detected in wash fluid, implying body surface contamination of the virus. The negative test results suggest that non-biting flies are the dominant insects involved in the observed local epidemic. Three genomic regions encoding RPO30, GPCR, and LW126 were successfully sequenced and subjected to phylogenetic analysis. The sequences shared high homology with LSDV/Russia/Saratov/2017, a recombinant vaccine-like strain formerly identified in Russia, and clustered with LSDV vaccine strains in phylogenetic trees of RPO30 and LW126. However, the GPCR gene was seen to be solely clustered with LSDV field strains, implying differences in host affinity between these closely related vaccine-like strains. Despite this, there is no direct evidence to support cross-border transmission of the vaccine-like LSDV. To our knowledge, this is the first report of vaccine-like LSDV DNA detection in non-biting flies in China.

High-performance zeolite NaA membranes on polymer-zeolite composite hollow fiber supports.

We report a new strategy: use of polymer-zeolite composite hollow fibers as supports. Zeolite membranes with high performance (flux = 8.0-9.0 kg m(-2) h(-1), alpha >10 000) can be synthesized directly on polymer-zeolite composite hollow fiber supports by a single in situ hydrothermal crystallization. The zeolite crystals imbedded in the polymer hollow fiber serve as seeds for the zeolite membrane growth, and they also "anchor" the zeolite membrane to the support to increase the adhesion of the zeolite membrane. Therefore, a separate and often complex seeding process can be omitted. A very uniform crystal distribution can be obtained easily, so continuous zeolite membranes can be prepared with high reproducibility. These composite hollow fibers can be produced simply by blending zeolite crystals into the polymer feed before the hollow fiber extrusion and thus are expected to be inexpensive.

High performance zeolite LTA pervaporation membranes on ceramic hollow fibers by dipcoating-wiping seed deposition.

We demonstrate for the first time that by one single hydrothermal synthesis a zeolite LTA membrane with a high flux of 9.0 kg/m(2) h and high water/ethanol separation factor of 10,000 could be formed on a ceramic hollow fiber that is known for its ability to form a compact module. The flux is the highest reported in the literatures. A novel seeding method, dipcoating-wiping, is key to obtaining zeolite membranes with high separation performance because it reproducibly produces a uniform and trace seed layer on the support. This new seeding method is expected to have serious implications for making defect-free zeolite films and membranes for many applications. The membranes reported here have the potential to solve the key problems that have prevented zeolite membranes from widespread use for biofuel production.

Rapid fabrication of highly b-oriented zeolite MFI thin films using ammonium salts as crystallization-mediating agents.

A new route to the synthesis of highly b-oriented zeolite MFI films is demonstrated for the first time using ammonium salts as crystallization-mediating agents in secondary growth. The ammonium salts tailor the crystallization process and silicate-NH4(+) interactions dominate over TPA-NH4(+) interactions so that nucleation was effectively suppressed during secondary growth.