Structure-Property Relationships for Potential Inversion From Electron Acceptors Based on Thiophene-Fused Triptycene Quinones, 1,4-Diketones and Their Malononitrile Adducts.

The synthesis and properties of a series of 11,11,12,12-tetracyano-9,10-anthraquinodimethane (TCAQ) inspired electron acceptors based on thiophene-fused quinone and triptycene motifs is presented. This has yielded insights into structure-property relationships for establishing and modulating simultaneous two-electron reduction processes in TCAQ analogues. These new compounds were synthesised using a Friedel-Crafts acylation between triptycene and thiophene-3,4-dicarbonyl chloride. Isomeric para-quinones featuring a [c]-fused thiophene on one side and a ß,ß- or α,ß-fused triptycene on the other were isolated alongside a thiophene-3,4-diketone which bears two triptycene fragments. Knoevenagel condensation of these products with malononitrile produced a quinoidal bis(dicyanomethylene), an oxo-dicyanomethylene and an acyclic bis(dicyanomethylene). This series of new electron accepting molecules has been studied using X-ray crystallography and the implications of their 3D structures on NMR and UV/vis absorbance spectroscopy and cyclic voltammetry results have been ascertained with conclusions underpinned by computational methods.

Transition-Metal-Free Continuous-Flow Synthesis of 2,5-Diaryl Furans: Access to Medicinal Building Blocks and Optoelectronic Materials.

The direct transformation of 1,3-dienes into valuable 2,5-diarylfurans using transition-metal-free conditions is presented. By employing a simple oxidation─dehydration sequence on readily accessible 1,3-dienes, important 2,5-diarylfuran building blocks frequently used in medicinal and material chemistry are prepared. The oxidation step is realized using singlet oxygen, and the intermediate endoperoxide is dehydrated under metal-free conditions and at ambient temperature using the Appel reagent. Notably, this sequence can be streamlined into continuous flow, thereby eliminating the isolation of the intermediate, often unstable endoperoxide. This leads to a significant improvement in isolated yields (ca. 27% average increase) of the 2,5-diarylfurans while also increasing safety and reducing waste. Our transition-metal-free synthetic approach to 2,5-diarylfurans delivers several important furan building blocks used commonly in medicinal chemistry and as optoelectronic materials, including short-chain linearly conjugated furan oligomers. Consequently, we also complete a short study of the optical and electrochemical properties of a selection of these novel materials.

Generating Long-Lived Triplet Excited States in Narrow Bandgap Conjugated Polymers.

Narrow bandgap conjugated polymers are a heavily studied class of organic semiconductors, but their excited states usually have a very short lifetime, limiting their scope for applications. One approach to overcome the short lifetime is to populate long-lived triplet states for which relaxation to the ground state is forbidden. However, the triplet lifetime of narrow bandgap polymer films is typically limited to a few microseconds. Here, we investigated the effect of film morphology on triplet dynamics in red-emitting conjugated polymers based on the classic benzodithiophene monomer unit with the solubilizing alkyl side chains C16 and C2C6 and then used Pd porphyrin sensitization as a further strategy to change the triplet dynamics. Using transient absorption spectroscopy, we demonstrated a 0.45 ms triplet lifetime for the more crystalline nonsensitized polymer C2C6, 2-3 orders of magnitude longer than typically reported, while the amorphous C16 had only a 5 µs lifetime. The increase is partly due to delaying bimolecular electron-hole recombination in the more crystalline C2C6, where a higher energy barrier for charge recombination is expected. A triplet lifetime of 0.4 ms was also achieved by covalently incorporating 5% of Pd porphyrin into the C16 polymer, which introduced extra energy transfer steps between the polymer and porphyrin that delayed triplet dynamics and increased the polymer triplet yield by 7.9 times. This work demonstrates two synthetic approaches to generate the longest-lived triplet excited states in narrow bandgap conjugated polymers, which is of necessity in a wide range of fields that range from organic electronics to sensors and bioapplications.

Oxidation State Tuning of Room Temperature Phosphorescence and Delayed Fluorescence in Phenothiazine and Phenothiazine-5,5-dioxide Dimers.

Heterocyclic dimers consisting of combinations of butterfly-shaped phenothiazine (PTZ) and its chemically oxidized form phenothiazine-5,5-dioxide (PTZ(SO2 )) have been synthesized. A twist is imposed across the dimers by ortho-substituents including methyl ethers, sulfides and sulfones. X-ray crystallography, cyclic voltammetry and optical spectroscopy, underpinned by computational studies, have been employed to study the interplay between the oxidation state, conformational restriction, and emission mechanisms including thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP). While the PTZ(SO2 ) dimers are simple fluorophores, the presence of PTZ induces triplet-mediated emission with a mixed PTZ-PTZ(SO2 ) dimer displaying concentration dependent hallmarks of both TADF and RTP.

Conformational Dependence of Triplet Energies in Rotationally Hindered N- and S-Heterocyclic Dimers: New Design and Measurement Rules for High Triplet Energy OLED Host Materials.

A series of four heterocyclic dimers has been synthesized, with twisted geometries imposed across the central linking bond by ortho-alkoxy chains. These include two isomeric bicarbazoles, a bis(dibenzothiophene-S,S-dioxide) and a bis(thioxanthene-S,S-dioxide). Spectroscopic and electrochemical methods, supported by density functional theory, have given detailed insights into how para- vs. meta- vs. broken conjugation, and electron-rich vs. electron-poor heterocycles impact the HOMO-LUMO gap and singlet and triplet energies. Crucially for applications as OLED hosts, the triplet energy (ET ) of these molecules was found to vary significantly between dilute polymer films and neat films, related to conformational demands of the molecules in the solid state. One of the bicarbazole species shows a variation in ET of 0.24 eV in the different media-sufficiently large to "make-or-break" an OLED device-with similar discrepancies found between neat films and frozen solution measurements of other previously reported OLED hosts. From consolidated optical and optoelectronic investigations of different host/dopant combinations, we identify that only the lower ET values measured in neat films give a reliable indicator of host/guest compatibility. This work also provides new molecular design rules for obtaining very high ET materials and controlling their HOMO and LUMO energies.

The role of excited-state character, structural relaxation, and symmetry breaking in enabling delayed fluorescence activity in push-pull chromophores.

Thermally activated delayed fluorescence (TADF) is a current promising route for generating highly efficient light-emitting devices. However, the design process of new chromophores is hampered by the complicated underlying photophysics. In this work, four closely related donor-π-acceptor-π-donor systems are investigated, two of which were synthesised previously, with the aim of elucidating their varying effectiveness for TADF. We outline that the frontier orbitals are insufficient for discriminating between the molecules. Subsequently, a detailed analysis of the excited states at a correlated ab initio level highlights the presence of a number of closely spaced singlet and triplet states of varying character. Results from five density functionals are compared against this reference revealing dramatic changes in, both, excited state energies and wavefunctions following variations in the amount of Hartree-Fock exchange included. Excited-state minima are optimised in solution showing the crucial role of structural variations and symmetry breaking for producing a strongly emissive S1 state. The adiabatic singlet-triplet gaps thus obtained depend strongly on the range separation parameter used in the hybrid density functional calculations. More generally, this work highlights intricate differences present between singlet and triplet excited state wavefunctions and the challenges in describing them accurately.

Harnessing Applied Potential: Selective ß-Hydrocarboxylation of Substituted Olefins.

The construction of carboxylic acid compounds in a selective fashion from low value materials such as alkenes remains a long-standing challenge to synthetic chemists. In particular, ß-addition to styrenes is underdeveloped. Herein we report a new electrosynthetic approach to the selective hydrocarboxylation of alkenes that overcomes the limitations of current transition metal and photochemical approaches. The reported method allows unprecedented direct access to carboxylic acids derived from ß,ß-trisubstituted alkenes, in a highly regioselective manner.

Red-shifted delayed fluorescence at the expense of photoluminescence quantum efficiency - an intramolecular charge-transfer molecule based on a benzodithiophene-4,8-dione acceptor.

Employing the thiophene based quinone, benzo[1,2-b:4,5-b']dithiophene-4,8-dione, as the electron-accepting moiety alongside N-phenylcarbazole donors to produce a donor-π-acceptor-π-donor (D-π-A-π-D) molecule has yielded a new red emitter displaying delayed fluorescence. This new molecule shows strongly (over 100 nm) red-shifted emission when compared to an anthraquinone based analogue. Cyclic voltammetry complemented by computational insights prove that this red-shift is due to the significantly stronger electron-accepting ability of the thiophene quinone compared to anthraquinone. Photophysical and computational studies of this molecule have revealed that while the presence of the thiophene containing acceptor facilitates rapid intersystem crossing which is comparable to anthraquinone analogues, the reverse intersystem crossing rate is slow and non-radiative decay is rapid which we can attribute to low-lying locally excited states. This limits the total photoluminescence quantum efficiency to less than 10% in both solution and the solid state. These results provide a useful example of how very minor structural variations can have a defining impact on the photophysical properties of new molecular materials.

Synthesis of Tetracyclic 2,3-Dihydro-1,3-diazepines from a Dinitrodibenzothiophene Derivative.

Triply fused 1,3-diazepine derivatives have been obtained by acidic reduction of rotationally locked and sterically hindered nitro groups in the presence of an aldehyde or ketone. The nitro groups are sited on adjacent rings of a dicyanodibenzothiophene-5,5-dioxide, which also displays fully reversible two-electron-accepting behavior. The synthesis, crystallographically determined molecular structures, and aspects of the electronic properties of these new molecules are presented.

Conformationally-restricted bicarbazoles with phenylene bridges displaying deep-blue emission and high triplet energies: systematic structure-property relationships.

The synthesis is reported of twelve new symmetrical carbazole dimers in which the carbazole units are linked via 1,4-phenylene spacers. There are two distinct series of compounds based on the position on the carbazole ring where the phenylene spacer is attached: this is either at carbazole C(3) (series 1a-1f) or at C(2) (series 2a-2f). The central phenylene ring is substituted with either two methyl, two methoxy or two cyano substituents which impart an intramolecular torsional angle between the phenylene and carbazole rings, thereby limiting the extent of π-conjugation between the carbazole units, and raising the triplet energies of the molecules to ET 2.6-3.0 eV, as determined from their phosphorescence spectra at 80 K. Structure-property relationships were studied by UV-vis and fluorescence spectroscopy, cyclic voltammetry and theoretical calculations. A notable observation is that substitution at the 2-position of carbazole (linear conjugation) exerts control over the position of the HOMO, while substitution at the 3-position of carbazole (meta conjugation) allows greater control over the LUMO. X-ray crystal structures are reported for two of the bicarbazoles. Compound 2d is shown to be a suitable host for the sky-blue emitter FIrpic in PhOLEDs, with improved device performance compared to CBP as host.

Thiazole-induced rigidification in substituted dithieno-tetrathiafulvalene: the effect of planarisation on charge transport properties.

Two novel tetrathiafulvalene (TTF) containing compounds 1 and 2 have been synthesised via a four-fold Stille coupling between a tetrabromo-dithienoTTF 5 and stannylated thiophene 6 or thiazole 4. The optical and electrochemical properties of compounds 1 and 2 have been measured by UV-vis spectroscopy and cyclic voltammetry and the results compared with density functional theory (DFT) calculations to confirm the observed properties. Organic field effect transistor (OFET) devices fabricated from 1 and 2 demonstrated that the substitution of thiophene units for thiazoles was found to increase the observed charge transport, which is attributed to induced planarity through S-N interactions of adjacent thiazole nitrogen atoms and TTF sulfur atoms and better packing in the bulk.

Hole-transport functionalized copper(I) dye sensitized solar cells.

Ligands containing first and second generation hole-transport triphenylamino-dendrons have been evaluated as ancillary ligands in copper(I) DSCs yielding an optimal efficiency of 3.77% in unmasked cells. The effects of masking the DSCs on measured parameters are discussed.

Integrating crops and livestock in subtropical agricultural systems.

As the demand for livestock products increases, and is expected to continue to increase over the next few decades, especially in developing countries, smallholder mixed systems are becoming more intensive. However, with limited land and water resources and concern about the environmental impact of agricultural practices and climate change, the challenge is to find ways of increasing productivity that do not compromise household food security, but rather increase incomes equitably and sustain or enhance the natural resource base. In developed countries there has been increased specialisation of crop and livestock production. In contrast, the majority of livestock in developing countries is kept in mixed crop/livestock systems. Crops (cereal grains and pulses) and crop residues provide the basis of the diet for animals, e.g. cereal straw fed to dairy cattle or sweet potato vines fed to pigs. Animal manure can provide significant nutrient inputs to crops. Water productivity is higher in mixed crop/livestock systems compared with growing crops alone. Mixed systems allow for a more flexible and profitable use of family labour where employment opportunities are limited. They also spread risks across several enterprises, a consideration in smallholder systems that may become even more important under certain climate change scenarios. Integrated crop/livestock systems can play a significant role in improving global food security but will require appropriate technological developments, institutional arrangements and supportive policy environments if they are to fulfil that potential in the coming decades.

Broadband near-IR absorbing Au-dithiolene complexes bearing redox-active oligothiophene ligands.

A series of three homoleptic, monoanionic gold dithiolene complexes of oligothiophene ligands which coordinate via a central thiophene-3,4-dithiolate chelate are presented. The oligomer chains are three, five and seven thiophenes long and the complexes display hybrid optoelectronic properties featuring characteristics of both the oligothiophene chains and the delocalised metal dithiolene centre. The properties of the complexes have been characterised using a variety of spectroscopic and electrochemical methods complemented by computational studies. Solid state spectroelectrochemistry has revealed that upon oxidation these complexes display intense and broad absorption across the visible spectrum. In attempting to produce nickel analogues of these materials a single crystal of a photo-oxidised nickel dithiolene complex has also been isolated.

Implementing Silicon Nanoribbon Field-Effect Transistors as Arrays for Multiple Ion Detection.

Ionic gradients play a crucial role in the physiology of the human body, ranging from metabolism in cells to muscle contractions or brain activities. To monitor these ions, inexpensive, label-free chemical sensing devices are needed. Field-effect transistors (FETs) based on silicon (Si) nanowires or nanoribbons (NRs) have a great potential as future biochemical sensors as they allow for the integration in microscopic devices at low production costs. Integrating NRs in dense arrays on a single chip expands the field of applications to implantable electrodes or multifunctional chemical sensing platforms. Ideally, such a platform is capable of detecting numerous species in a complex analyte. Here, we demonstrate the basis for simultaneous sodium and fluoride ion detection with a single sensor chip consisting of arrays of gold-coated SiNR FETs. A microfluidic system with individual channels allows modifying the NR surfaces with self-assembled monolayers of two types of ion receptors sensitive to sodium and fluoride ions. The functionalization procedure results in a differential setup having active fluoride- and sodium-sensitive NRs together with bare gold control NRs on the same chip. Comparing functionalized NRs with control NRs allows the compensation of non-specific contributions from changes in the background electrolyte concentration and reveals the response to the targeted species.

Modulation of the solubility of luminescent semiconductor nanocrystals through facile surface functionalization.

The solubility of luminescent quantum dots in solvents from hexane to water can be finely tuned by the choice of the countercations associated with carboxylate residues present on the nanocrystal surface. The resulting nanocrystals exhibit long term colloidal and chemical stability and maintain their photophysical properties.

Solution, structural and photophysical aspects of substituent effects in the N

The syntheses and properties of a series of eleven new [Ir(ppy)2(N^N)][PF6] complexes (Hppy = 2-phenylpyridine) are reported. The N^N ligands are based on 2,2-bipyridine (bpy), substituted in the 6- or 5-positions with groups that are structurally and electronically diverse. All but two of the N^N ligands incorporate an aromatic ring, designed to facilitate intra-cation face-to-face π-interactions between the N^N and one [ppy](-) ligand. Within the set of ligands, 6-(3-tolyl)-2,2'-bipyridine (5), 4,6-bis(4-nitrophenyl)-2,2'-bipyridine (9), and 4,6-bis(3,4,5-trimethoxyphenyl)-2,2'-bipyridine (10) are new and their characterization includes single crystal structures of 9, and two polymorphs of 10. A representative [Ir(ppy)2(N^O)](+) complex is also described. We report solution NMR spectroscopic, photophysical and electrochemical properties of the complexes, as well as representative solid-state structural data. The solution (1)H NMR spectroscopic data illustrate different dynamic processes involving the substituents attached to the bpy domain in the ligands. In degassed MeCN and at room temperature, the [Ir(ppy)2(N^N)][PF6] complexes are orange emitters with λ(em)max in the range 575 to 608 nm; however, quantum yields are very low. The most promising complexes were evaluated in light-emitting electrochemical cells leading to bright and stable devices with rather good external quantum efficiencies.

Selective sodium sensing with gold-coated silicon nanowire field-effect transistors in a differential setup.

Ion-sensitive field-effect transistors based on silicon nanowires with high dielectric constant gate oxide layers (e.g., Al2O3 or HfO2) display hydroxyl groups which are known to be sensitive to pH variations but also to other ions present in the electrolyte at high concentration. This intrinsically nonselective sensitivity of the oxide surface greatly complicates the selective sensing of ionic species other than protons. Here, we modify individual nanowires with thin gold films as a novel approach to surface functionalization for the detection of specific analytes. We demonstrate sodium ion (Na(+)) sensing by a self-assembled monolayer (SAM) of thiol-modified crown ethers in a differential measurement setup. A selective Na(+) response of ≈-44 mV per decade in a NaCl solution is achieved and tested in the presence of protons (H(+)), potassium (K(+)), and chloride (Cl(-)) ions, by measuring the difference between a nanowire with a gold surface functionalized by the SAM (active) and a nanowire with a bare gold surface (control). We find that the functional SAM does not affect the unspecific response of gold to pH and background ionic species. This represents a clear advantage of gold compared to oxide surfaces and makes it an ideal candidate for differential measurements.