Effect of interfilament hydrodynamic interaction on swimming performance of two-filament microswimmers.

The motion of two-filament artificial swimmers is modeled by assuming interfilament coupling via hydrodynamic viscous drag. The filaments are assumed to be in parallel and attached to a rigid spherical head. The boundary actuation is assumed to occur at the head-filament joint through an external oscillatory magnetic field and the filament motion is taken to be confined to the flexural plane. The hydrodynamic coupling modifies the viscous drag on one filament due to motion of the other. Assuming in-phase, small amplitude, low frequency actuation the swimmer performance metrics (propulsive thrust, propulsion speed and energy efficiency) are calculated using Lauga's formulation for the swimmer kinematics coupled with filament dynamics. The results are compared with the performance of a single-filament and an uncoupled two-filament swimmer. The hydrodynamic coupling is found to enhance the performance measures in a parametric window. Also, it is found that there occurs an optimum combination of head size and swimmer length that can maximize the microswimmer performance. The findings are in agreement with the experimental observations on multi-filament artificial microswimming.

Quality control of herbal medicines by using spectroscopic techniques and multivariate statistical analysis.

Herbal medicines play an important role in modern human life and have significant effects on treating diseases; however, the quality and safety of these herbal products has now become a serious issue due to increasing pollution in air, water, soil, etc. The present study proposes Fourier transform infrared spectroscopy (FTIR) along with the statistical method principal component analysis (PCA) to identify and discriminate herbal medicines for quality control. Herbal plants have been characterized using FTIR spectroscopy. Characteristic peaks (strong and weak) have been marked for each herbal sample in the fingerprint region (400-2000 cm(-1)). The ratio of the areas of any two marked characteristic peaks was found to be nearly consistent for the same plant from different regions, and thus the present idea suggests an additional discrimination method for herbal medicines. PCA clusters herbal medicines into different groups, clearly showing that this method can adequately discriminate different herbal medicines using FTIR data. Toxic metal contents (Cd, Pb, Cr, and As) have been determined and the results compared with the higher permissible daily intake limit of heavy metals proposed by the World Health Organization (WHO).

MEMS sensor array-based electronic nose for breath analysis-a simulation study.

The paper presents a simulation study of breath analysis based on theoretical models of microelectromechanical structure (MEMS) cantilever sensor array. The purpose of this study is to suggest a methodology for the development of MEMS electronic nose (e-nose) for monitoring disease-specific volatiles in exhaled breath. Oxidative stress and diabetes are taken as case studies for the assessment of e-nose designs. The detection of ethane for general oxidative stress, isoprene for hypoxia, and acetone for diabetes are considered for targeted detection. A number of volatiles concurrently present in the exhaled breath are taken as interferents. The MEMS cantilevers are coated with volatile-selective polymers and are analyzed in both the static and dynamic modes. The sensor array is defined by polymer selections based on three data mining methods: principal component analysis (PCA), fuzzy c-means clustering (FCM), and fuzzy subtractive clustering (FSC). This utilizes vapor/polymer partition coefficients as a database. Analyses are carried out to find optimal combinations of the polymer selection method and cantilever sensing mode. Virtual breath analysis experiments are analyzed by PCA for target discrimination. It is found that no single combination works best in all conditions. The acetone (diabetes) detection is best in both sensing modes with the polymers selected by FSC; the isoprene (hypoxia) is detectable only in static sensing mode with polymers selected by FCM clustering; and the ethane (oxidative stress) detection is possible by all sensing modes and polymer selections, provided the breath samples are preconcentrated. This study suggests that it is difficult to realize a single general-purpose MEMS breath analyzer. The dedicated analyzers for specific disease indications can however be made with an optimal combination of sensing mode and polymer coatings.

Modeling electrical response of polymer-coated SAW resonators by equivalent circuit representation.

The paper presents an equivalent circuit model of the polymer coated surface acoustic wave (SAW) resonators by combining coupling-of-mode (COM) description of SAW resonators and perturbation calculation of SAW propagation under polymer loading. An expression for the motional load produced by polymer coating is deduced in terms of COM parameters and polymer characteristics. In addition, expressions for the shifts in resonance frequency and attenuation due to polymer loading are obtained. Simulation results are presented for one-port and two-port resonator devices coated with viscoelastic thin polymer film. The influence of polymer film on resonator response is studied with regard to variations in film thickness and shear modulus. The model simplifies understanding of polymer-coated SAW sensors.

Multifrequency characterization of viscoelastic polymers and vapor sensing based on SAW oscillators.

Simplified relations for the changes in SAW velocity and attenuation due to thin polymer coatings and vapor sorption are presented by making analytic approximations to the complex theoretical model developed earlier by Martin et al. [Anal. Chem. 66 (14) (1994) 2201-2219]. The approximate velocity relation is accurate within 4% for the film thicknesses up to 20% of the acoustic wavelength in the polymer film, and is useful for analyzing the mass loading, swelling and viscoelastic effects in SAW vapor sensors. The approximate attenuation relation is accurate within 20% for very thin films, (less than 2% of the acoustic wavelength in the film). Based on these relations, a new procedure for determination of polymer viscoelastic properties is described that exploits the frequency dependence of the velocity and attenuation perturbations, and employs multifrequency measurement on the same SAW platform. Expressions for individual contributions from the mass loading, film swelling and viscoelastic effects in SAW vapor sensors are derived, and their implications for the sensor design and operation are discussed. Also, a new SAW comb filter design is proposed that offers possibility for multimode SAW oscillator operation over a decade of frequency variation, and illustrates feasibility for experimental realization of wide bandwidth multifrequency SAW platforms.