RESUMEN
Wadsley-Roth phase titanium niobium oxides have received considerable interest as anodes for lithium ion batteries. However, the volume expansion and sluggish ion/electron transport kinetics retard its application in grid scale. Here, fast and durable lithium storage in entropy-stabilized Fe0.4 Ti1.6 Nb10 O28.8 (FTNO) is enabled by tuning entropy via Fe substitution. By increasing the entropy, a reduction of the calcination temperature to form a phase pure material is achieved, leading to a reduced grain size and, therefore, a shortening of Li+ pathway along the diffusion channels. Furthermore, in situ X-ray diffraction reveals that the increased entropy leads to the decreased expansion along a-axis, which stabilizes the lithium intercalation channel. Density functional theory modeling indicates the origin to be the more stable FeO bond as compared to TiO bond. As a result, the rate performance is significantly enhanced exhibiting a reversible capacity of 73.7 mAh g-1 at 50 C for FTNO as compared to 37.9 mAh g-1 for its TNO counterpart. Besides, durable cycling is achieved by FTNO, which delivers a discharge capacity of 130.0 mAh g-1 after 6000 cycles at 10 C. Finally, the potential impact for practical application of FTNO anodes has been demonstrated by successfully constructing fast charging and stable LiFePO4 âFTNO full cells.
RESUMEN
Since Ni-rich cathode material is very sensitive to moisture and easily forms residual lithium compounds that degrade cell performance, it is very important to pay attention to the selection of the surface modifying media. Accordingly, hydroxyapatite (Ca5 (PO4 )3 (OH)), a tooth-derived material showing excellent mechanical and thermodynamic stabilities, is selected. To verify the availability of hydroxyapatite as a surface protection material, lithium-doped hydroxyapatite, Ca4.67 Li0.33 (PO4 )3 (OH), is formed with ≈10-nm layer after reacting with residual lithium compounds on Li[Ni0.8 Co0.15 Al0.05 ]O2 , which spontaneously results in dramatic reduction of surface lithium residues to 2879 ppm from 22364 ppm. The Ca4.67 Li0.33 (PO4 )3 (OH)-modified Li[Ni0.8 Co0.15 Al0.05 ]O2 electrode provides ultra-long term cycling stability, enabling 1000 cycles retaining 66.3% of its initial capacity. Also, morphological degradations such as micro-cracking or amorphization of surface are significantly suppressed by the presence of Ca4.67 Li0.33 (PO4 )3 (OH) layer on the Li[Ni0.8 Co0.15 Al0.05 ]O2 , of which the Ca4.67 Li0.33 (PO4 )3 (OH) is transformed to CaF2 via Ca4.67 Li0.33 (PO4 )3 F during the long term cycles reacting with HF in electrolyte. In addition, the authors' density function theory (DFT) results explain the reason of instability of NCA and why CaF2 layers can delay the micro-cracking during electrochemical reaction. Therefore, the stable Ca4.67 Li0.33 (PO4 )3 F and CaF2 layers play a pivotal role to protect the Li[Ni0.8 Co0.15 Al0.05 ]O2 with ultra-long cycling stability.
Asunto(s)
Suministros de Energía Eléctrica , Litio , Electrodos , IonesRESUMEN
Dual-phase TiO2 consisting of bronze and anatase phases is an attractive electrode material for fast-charging lithium-ion batteries due to the unique phase boundaries present. However, further enhancement of its lithium storage performance has been hindered by limited knowledge on the impact of cation doping as an efficient modification strategy. Here, the effects of Ru4+ doping on the dual-phase structure and the related lithium storage performance are demonstrated for the first time. Structural analysis reveals that an optimized doping ratio of Ru:Ti = 0.01:0.99 (1-RTO) is vital to maintain the dual-phase configuration because the further increment of Ru4+ fraction would compromise the crystallinity of the bronze phase. Various electrochemical tests and density functional theory calculations indicate that Ru4+ doping in 1-RTO enables more favorable lithium diffusion in the bulk for the bronze phase as compared to the undoped TiO2 (TO) counterpart, while lithium kinetics in the anatase phase are found to remain similar. Furthermore, Ru4+ doping leads to a better cycling stability for 1-RTO-based electrodes with a capacity retention of 82.1% after 1200 cycles at 8 C as compared to only 56.1% for TO-based electrodes. In situ X-ray diffraction reveals a reduced phase separation in the lithiated anatase phase, which is thought to stabilize the dual-phase architecture during extended cycling. The simultaneous enhancement of rate ability and cycling stability of dual-phase TiO2 enabled by Ru4+ doping provides a new strategy toward fast-charging lithium-ion batteries.
RESUMEN
BACKGROUND: Osteoporosis, the silent epidemic, is defined as a systemic skeletal disease characterized by low mineral bone mass and micro-architectural deterioration of bone tissue. Osteoporosis is considered a burden to global economic, social, and health development. Osteoporosis exerts a substantial global influence, markedly influencing rates of illness and death on a broad scale. Clinical features of osteoporosis can include chronic back pain, loss of height, and a stooped posture, as well as an increased risk of fractures in the spine, hip, and wrist. Accurate identification and monitoring of these clinical features are essential for effective management and treatment of osteoporosis. This study aims to identify the knowledge, attitudes, and practices (KAP) of adults (over 18 years) about osteoporosis and identify relations between knowledge, attitudes, and practices with demographic data. Furthermore, to assess the risk factors and preventive measures for osteoporosis. METHODOLOGY: Data from 446 responders were collected using a Google Forms questionnaire, including questions to assess knowledge, attitudes, and practice levels among adults 18 years and above in the United Arab Emirates (UAE). The collected data and statistical analysis were done through the IBM® SPSS® Statistics. Chi-Square was used in SPSS Statistics; the chi-square test was used for the relation between categorical variables, and P less than 0.05 was the cut-off level of significance. RESULTS: The research revealed that 41.9% of the participants had good knowledge, 38.8% had a positive attitude, and 45.3% had poor practices. The results also showed that there is a statistically significant correlation between gender and knowledge, attitudes, and practices. CONCLUSION: Our research demonstrates that there's a statistically significant correlation between gender variables with knowledge, attitudes, and practices. These findings have important implications in assessing the correlation between variables in our research that could be used to prevent osteoporosis further, target the specific demographic group, and provide the required education. Overall, our research contributes to a better understanding of the knowledge, attitude, and practices towards Osteoporosis among adults in the UAE and underscores the importance of further awareness in this area.
RESUMEN
Cation doping is an effective strategy for improving the cyclability of layered oxide cathode materials through suppression of phase transitions in the high voltage region. In this study, Mg and Sc are chosen as dopants in P2-Na0.67Ni0.33Mn0.67O2, and both have found to positively impact the cycling stability, but influence the high voltage regime in different ways. Through a combination of synchrotron-based methods and theoretical calculations it is shown that it is more than just suppression of the P2 to O2 phase transition that is critical for promoting the favorable properties, and that the interplay between Ni and O activity is also a critical aspect that dictates the performance. With Mg doping, the Ni activity can be enhanced while simultaneously suppressing the O activity. This is surprising because it is in contrast to what has been reported in other Mn-based layered oxides where Mg is known to trigger oxygen redox. This contradiction is addressed by proposing a competing mechanism between Ni and Mg that impacts differences in O activity in Na0.67MgxNi0.33- xMn0.67O2 (x < 0 < 0.33). These findings provide a new direction in understanding the effects of cation doping on the electrochemical behavior of layered oxides.
RESUMEN
Low-dimensional hybrid perovskites have demonstrated excellent performance as white-light emitters. The broadband white emission originates from self-trapped excitons (STEs). Since the mechanism of STEs formation in perovskites is still not clear, preparing new low-dimensional white perovskites relies mostly on screening lots of intercalated organic molecules rather than rational design. Here, we report an atom-substituting strategy to trigger STEs formation in layered perovskites. Halogen-substituted phenyl molecules are applied to synthesize perovskite crystals. The halogen-substituents will withdraw electrons from the branched chain (-R-NH3+) of the phenyl molecule. This will result in positive charge accumulation on -R-NH3+, and thus stronger Coulomb force of bond (-R-NH3+)-(PbBr42-), which facilitates excitons self-trapping. Our designed white perovskites exhibit photoluminescence quantum yield of 32%, color-rendering index of near 90 and chromaticity coordinates close to standard white-light. Our joint experiment-theory study provides insights into the STEs formation in perovskites and will benefit tailoring white perovskites with boosting performance.