Tilted Bragg grating in a glycerol-infiltrated specialty optical fiber for temperature and strain measurements.

In this Letter, we propose an in-line tilted fiber Bragg grating sensor for temperature and strain measurements. The grating is inscribed in a specialty optical fiber using tightly focused femtosecond laser pulses and the line-by-line direct writing method. Beside the central core in which the grating is produced, a hollow channel filled with glycerol aqueous solution significantly improves the sensitivity of the fiber cladding modes due to its high thermo-optic coefficient. We show that the temperature sensitivity of the core mode is 9.8 pm/°C, while the one of the cladding modes is strongly altered and can reach -24.3 pm/°C, in the investigated range of 20-40°C. For the strain measurement, sensitivities of the core mode and the cladding modes are similar (∼0.60 pm/µÎµ) between 0 and 2400 µÎµ. The significative difference of temperature sensitivity between the two modes facilitates the discrimination of the dual parameters in simultaneous measurements.

Design of hollow core step-index antiresonant fiber with stepped refractive indices cladding.

With the benefits of low latency, wide transmission bandwidth, and large mode field area, hollow-core antiresonant fiber (HC-ARF) has been a research hotspot in the past decade. In this paper, a hollow core step-index antiresonant fiber (HC-SARF), with stepped refractive indices cladding, is proposed and numerically demonstrated with the benefits of loss reduction and bending improvement. Glass-based capillaries with both high (n = 1.45) and low (as low as n = 1.36) refractive indices layers are introduced and formatted in the cladding air holes. Using the finite element method to perform numerical analysis of the designed fiber, results show that at the laser wavelengths of 980 and 1064 nm, the confinement loss is favorably reduced by about 6 dB/km compared with the conventional uniform cladding HC-ARF. The bending loss, around 15 cm bending radius of this fiber, is also reduced by 2 dB/km. The cladding air hole radius in this fiber is further investigated to optimize the confinement loss and the mode field diameter with single-mode transmission behavior. This proposed HC-SARF has great potential in optical fiber transmission and high energy delivery.