Optimizing SCND with carbon-rich hydrolysates from typical organic wastes: Material composition, augmentation performance, microbiome response, and life cycle impact.

The rapid growth of production and consumption has led to severe environmental pollution, creating a major challenge to achieving the United Nations' sustainable development goals (SDGs). To address it, recycling of organic wastes into value-added products is a possible solution. In this work, four typical organic wastes including sewage sludge (SS), chicken manure (CM), food waste (FW), and corn straw (CS) were employed to produce hydrolysates augmenting shortcut nitrification-denitrification (SCND) for nitrogen depletion in wastewater. The hydrolysates were carbon-rich, with total COD (TCOD), soluble COD (SCOD), and volatile fatty acids (VFA) concentrations ranging from 32.5 to 102.7, 5.7 to 48.4, and 2.0-16.5 mg/L, respectively. The most effective nitrogen depletion was obtained in units supplemented with CM and FW hydrolysates, which had reduced average NH3-N concentrations and near-zero TN removal failure rates under legal requirements. The microbial community analysis demonstrated that various functional bacteria from phylum to genus level were detected in all scenarios, which was corroborated by abundant genetic functions involved in nitrogen metabolism. Further, life cycle assessment revealed negative environmental impact on all categories, with an exception of eutrophication potential (EP) with negative values (∼-0.04 kg Phosphate eq.), allowing positive net environmental benefit (NEB). Operational cost analysis revealed that CM and FW are more effective but costlier than SS and CS. Together, these results indicate that, after hydrolysis, organic wastes can be efficient stimulant augmenting SCND performance for nitrogen depletion in wastewater, benefiting the overall environmental impact.

Decreasing lactate input for cost-effective sulfidogenic metal removal in sulfate-rich effluents: Mechanistic insights from (bio)chemical kinetics to microbiome response.

High material cost is the biggest barrier for the industrial use of low-molecular-weight organics (i.e. lactate) as external carbon and electron source for sulfidogenic metal removal in sulfate-rich effluents. This study aims to provide mechanistic evidence from kinetics to microbiome analysis by batch modeling to support the possibility of decreasing the lactate input to achieve cost-effective application. The results showed that gradient COD/SO42- ratios at a low level had promising treatment performance, reaching neutralized pH with nearly total elimination of COD (91%-99%), SO42- (85%-99%), metals (80%-99%) including Cu, Zn, and Mn. First-order kinetics exhibited the best fit (R2 = 0.81-0.98) to (bio)chemical reactions, and the simulation results revealed that higher COD/SO42- accelerated the reaction rate of SO42- and COD but not suitable to that of metals. On the other hand, we found that the decreasing COD/SO42- ratio increased average path distance but decreased clustering coefficient and heterogeneity in microbial interaction network. Genetic prediction found that the sulfate-reduction-related functions were significantly correlated with the reaction kinetics changed with COD/SO42- ratios. Our study, combining reaction kinetics with microbiome analysis, demonstrates that the use of lactate as a carbon source under low COD/SO42- ratios entails significant efficiency of metal removal in sulfate-rich effluent using SRB-based technology. However, further studies should be carried out, including parameter-driven optimization and life cycle assessments are necessary, for its practical application.