A quality improvement approach to develop an educational initiative for an age-friendly health system.

Authors describe a quality improvement approach to develop and pilot test educational materials with an aim to educate MinuteClinic providers in the provision of age-friendly care using the 4Ms Framework: What Matters, Medication, Mentation, Mobility. The team used surveys, focus groups and site visits to develop educational prototypes with Plan-Do-Study-Act iterative cycles to improve the education. Educational materials introduced providers to 4Ms assessment and evidence-based act on strategies for older adults in the convenient care setting. The education activities included an interactive orientation module comparing standard care to 4Ms care, 10 video vignettes with experts addressing gerontological topics, and 12 grand rounds presented monthly on topics applying the 4Ms with older adults. The information gained from the staff aided in the development and the iterative improvement of the materials. This article highlights the benefits of using a quality improvement approach in development of clinician education in provision of age-friendly care.

Potential Role of Perilacunar Remodeling in the Progression of Osteoporosis and Implications on Age-Related Decline in Fracture Resistance of Bone.

PURPOSE OF REVIEW: We took an interdisciplinary view to examine the potential contribution of perilacunar/canalicular remodeling to declines in bone fracture resistance related to age or progression of osteoporosis. RECENT FINDINGS: Perilacunar remodeling is most prominent as a result of lactation; recent advances further elucidate the molecular players involved and their effect on bone material properties. Of these, vitamin D and calcitonin could be active during aging or osteoporosis. Menopause-related hormonal changes or osteoporosis therapies affect bone material properties and mechanical behavior. However, investigations of lacunar size or osteocyte TRAP activity with age or osteoporosis do not provide clear evidence for or against perilacunar remodeling. While the occurrence and potential role of perilacunar remodeling in aging and osteoporosis progression are largely under-investigated, widespread changes in bone matrix composition in OVX models and following osteoporosis therapies imply osteocytic maintenance of bone matrix. Perilacunar remodeling-induced changes in bone porosity, bone matrix composition, and bone adaptation could have significant implications for bone fracture resistance.

Simulating the Role of the Parent: Promoting Family-Centered Nursing Care.

Parents of hospitalized children need support to diminish their own fear and anxiety and provide safe and loving care for the child. Baccalaureate nursing students, who are rarely parents themselves, often find it difficult to understand the needs of parents. An innovative simulation strategy was created to enhance students' understanding of the parent's role and its effect on family-centered care. This article describes the development of pediatric simulation experiences that actively incorporate the role of a parent. Portraying the parent during the simulation increases students' ability to be empathetic while providing safe family-centered care.

Promoting Interprofessional Collaborative Practice Through Simulation.

A 12-week program was developed to educate nursing, medicine, and physician assistant faculty on the principles and best practices of simulation. The goal was to facilitate team building and collaborative practice through the implementation of an interprofessional (IP) simulation experience for students. Workshops focused on IP communication involving seminar-based instruction, discussion, and the progressive development of an IP simulation based on a National League for Nursing Advancing Care Excellence for Seniors scenario. During the final session, students participated in the simulation while faculty evaluated and revised the scenario to best meet the needs of students from the three disciplines.

The Formation of Calcified Nanospherites during Micropetrosis Represents a Unique Mineralization Mechanism in Aged Human Bone.

Osteocytes-the central regulators of bone remodeling-are enclosed in a network of microcavities (lacunae) and nanocanals (canaliculi) pervading the mineralized bone. In a hitherto obscure process related to aging and disease, local plugs in the lacuno-canalicular network disrupt cellular communication and impede bone homeostasis. By utilizing a suite of high-resolution imaging and physics-based techniques, it is shown here that the local plugs develop by accumulation and fusion of calcified nanospherites in lacunae and canaliculi (micropetrosis). Two distinctive nanospherites phenotypes are found to originate from different osteocytic elements. A substantial deviation in the spherites' composition in comparison to mineralized bone further suggests a mineralization process unlike regular bone mineralization. Clearly, mineralization of osteocyte lacunae qualifies as a strong marker for degrading bone material quality in skeletal aging. The understanding of micropetrosis may guide future therapeutics toward preserving osteocyte viability to maintain mechanical competence and fracture resistance of bone in elderly individuals.

Deterioration of teeth and alveolar bone loss due to chronic environmental high-level fluoride and low calcium exposure.

OBJECTIVES: Health risks due to chronic exposure to highly fluoridated groundwater could be underestimated because fluoride might not only influence the teeth in an aesthetic manner but also seems to led to dentoalveolar structure changes. Therefore, we studied the tooth and alveolar bone structures of Dorper sheep chronically exposed to very highly fluoridated and low calcium groundwater in the Kalahari Desert in comparison to controls consuming groundwater with low fluoride and normal calcium levels within the World Health Organization (WHO) recommended range. MATERIALS AND METHODS: Two flocks of Dorper ewes in Namibia were studied. Chemical analyses of water, blood and urine were performed. Mineralized tissue investigations included radiography, HR-pQCT analyses, histomorphometry, energy-dispersive X-ray spectroscopy and X-ray diffraction-analyses. RESULTS: Fluoride levels were significantly elevated in water, blood and urine samples in the Kalahari group compared to the low fluoride control samples. In addition to high fluoride, low calcium levels were detected in the Kalahari water. Tooth height and mandibular bone quality were significantly decreased in sheep, exposed to very high levels of fluoride and low levels of calcium in drinking water. Particularly, bone volume and cortical thickness of the mandibular bone were significantly reduced in these sheep. CONCLUSIONS: The current study suggests that chronic environmental fluoride exposure with levels above the recommended limits in combination with low calcium uptake can cause significant attrition of teeth and a significant impaired mandibular bone quality. CLINICAL RELEVANCE: In the presence of high fluoride and low calcium-associated dental changes, deterioration of the mandibular bone and a potential alveolar bone loss needs to be considered regardless whether other signs of systemic skeletal fluorosis are observed or not.

Age-related changes in the plasticity and toughness of human cortical bone at multiple length scales.

The structure of human cortical bone evolves over multiple length scales from its basic constituents of collagen and hydroxyapatite at the nanoscale to osteonal structures at near-millimeter dimensions, which all provide the basis for its mechanical properties. To resist fracture, bone's toughness is derived intrinsically through plasticity (e.g., fibrillar sliding) at structural scales typically below a micrometer and extrinsically (i.e., during crack growth) through mechanisms (e.g., crack deflection/bridging) generated at larger structural scales. Biological factors such as aging lead to a markedly increased fracture risk, which is often associated with an age-related loss in bone mass (bone quantity). However, we find that age-related structural changes can significantly degrade the fracture resistance (bone quality) over multiple length scales. Using in situ small-angle X-ray scattering and wide-angle X-ray diffraction to characterize submicrometer structural changes and synchrotron X-ray computed tomography and in situ fracture-toughness measurements in the scanning electron microscope to characterize effects at micrometer scales, we show how these age-related structural changes at differing size scales degrade both the intrinsic and extrinsic toughness of bone. Specifically, we attribute the loss in toughness to increased nonenzymatic collagen cross-linking, which suppresses plasticity at nanoscale dimensions, and to an increased osteonal density, which limits the potency of crack-bridging mechanisms at micrometer scales. The link between these processes is that the increased stiffness of the cross-linked collagen requires energy to be absorbed by "plastic" deformation at higher structural levels, which occurs by the process of microcracking.

Fostering Digital Life Skills Through Social Media With Adolescents in 6 German States: Protocol for an Accessibility Study According to the RE-AIM Framework.

BACKGROUND: Social media is essential in the lives of adolescents, with 97% of US teenagers engaging daily. While it facilitates communication, learning, and identity development, it also poses risks like harmful content exposure and psychological distress, particularly for adolescents in their critical developmental stage. Teaching digital life skills innovatively counters these risks, adapting traditional competencies such as decision-making, problem-solving, creative and critical thinking, communication, interpersonal skills, self-awareness, empathy, and emotional and stress management to digital challenges. OBJECTIVE: This study evaluates the accessibility of the "leduin" program, a novel intervention designed to impart digital life skills through Instagram. The program aims to leverage social media's educational potential, focusing on effective strategies to engage adolescents. Emphasizing accessibility is crucial, as it determines the program's overall impact. METHODS: The leduin program, developed through intervention mapping, applies behavior change techniques via social media for 9th and 10th graders. It is a 14-week spaced learning curriculum with daily sessions <5 minutes. Emphasizing the "reach" aspect of the reach, effectiveness, adoption, implementation, and maintenance (RE-AIM) model, the recruitment targets diverse educational settings across 6 German states, aiming for inclusivity. Recruitment will involve schools, youth centers, and therapeutic facilities. The study seeks at least 128 participants, a calculated minimum to detect medium-sized effects in the quasi-experimental design and explore varying engagement levels and program responses. Data collection includes preintervention, postintervention, and 6-month follow-up surveys, using multilevel regression, latent growth models, and qualitative analysis to extensively assess reach and gain first insights on effectiveness, acceptance, implementation, and maintenance. The study aims to reveal key factors influencing program participation and interaction; a detailed analysis of engagement patterns will reveal the effectiveness of the recruitment strategies and barriers to participation. Additionally, initial indications of the program's impact on life skills, social media-related skills, health status, risk behaviors, and academic performance will be analyzed. RESULTS: Recruitment was planned from May 2023 until the beginning of the leduin program in October 2023. As of March 2024, we have recruited 283 participants. CONCLUSIONS: The leduin program stands as an innovative and essential initiative in adolescent health promotion, harnessing the power of social media to teach important digital life skills. This study highlights the critical role of accessibility in the success of social media interventions. Effective adolescent engagement strategies are imperative, as they dictate the overall impact of such interventions. The insights gained from this study will be instrumental in shaping future programs, laying groundwork for a subsequent, more comprehensive cluster-randomized controlled trial. The study's design acknowledges the limitations of the current quasi-experimental approach, including the anticipated sample size and the absence of a control group, and aims to provide a foundational understanding for future research in this field. TRIAL REGISTRATION: Deutsches Register Klinischer Studien DRKS00032308; https://drks.de/search/de/trial/DRKS00032308. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): PRR1-10.2196/51085.

A scoping review of cephalometric normative data in children.

Objective: Understanding the orofacial characteristics and growth patterns in children is essential for both orthodontics and research on children with orofacial abnormalities. However, a concise resource of normative data on the size and relative position of these structures in different populations is not available. Our objective was to aggregate normative data to assess the growth of the orofacial skeletal structures in children with a well-balanced face and normal occlusion. Methods: The MEDLINE, Embase, and Scopus databases were searched. Inclusion criteria included longitudinal and cross-sectional studies on cephalometric measurement of skeletal tissues and a study population ≤ 18 years with a well-balanced face and normal occlusion. Key study parameters were extracted, and knowledge was synthesized. A quality appraisal was performed using a 10-point scale. Results: The final selection comprised of 12 longitudinal and 33 cross-sectional studies, the quality of which ranged from good to excellent. Our results showed that from childhood to adulthood, the length of the cranial base increased significantly while the cranial base angle remained constant; both the maxilla and mandible moved forward and downward. The profile becomes straighter with age. Conclusions: Growth patterns in children with a well-balanced face and normal occlusion follow accepted theories of growth.

3D printing vs traditional workflow for the fabrication of mandibular implant overdentures: study protocol for a mixed-methods cross-over RCT.

BACKGROUND: Complete tooth loss is a significant global oral health issue, particularly impacting older individuals with lower socioeconomic status. Computer-assisted technologies enhance oral healthcare access by the elderly. Despite promising in vitro reports on digital denture materials, evidence from randomized clinical trials (RCTs) is lacking to verify their performance. This cross-over RCT will investigate whether 3D-printed implant-retained mandibular overdentures (IMO) are more satisfactory for edentulous seniors than those made through traditional methods. METHODS/DESIGN: We will recruit 26 completely edentulous participants (any sex/gender) based on the following eligibility criteria: age ≥ 60 years, no tooth extraction in the past 12 months, two implants in the lower jaw, and need for new dentures in both jaws. Each participant will receive two denture pairs, either manufactured by 3D printing or traditionally, to be worn in a random order. A timeline of 3 months with each denture pair will be considered for outcome assessment (total: 6 months). Patient satisfaction with dentures will be measured by the McGill Denture Satisfaction Questionnaire. We will evaluate other patient-reported outcomes (including oral health-related quality of life) as well as clinician-assessed quality and cost. At the end of the trial, participants will choose which denture pair they wish to keep and interviewed about their experiences with the 3D-printed IMO. The quantitative and qualitative data will be incorporated through an explanatory mixed-methods strategy. A final quantitative assessment will happen after 12 months with the preferred IMO to assess the long-term performance and maintenance needs. DISCUSSION: This mixed-methods RCT will explore patient experiences with 3D-printed IMOs, aiming to assess the potential for altering clinical practice and dental public health policies. Our results will inform policies by showing whether 3D printing offers comparable outcomes at lower costs, facilitating greater access to oral care for the elderly. TRIAL REGISTRATION: ClinicalTrials.gov, NCT06155630, Registered on 04 December 2023. https://classic. CLINICALTRIALS: gov/ct2/show/NCT06155630.

Bone matrix properties in adults with osteogenesis imperfecta are not adversely affected by setrusumab-a sclerostin neutralizing antibody.

Osteogenesis imperfecta (OI) is a skeletal dysplasia characterized by low bone mass and frequent fractures. Children with OI are commonly treated with bisphosphonates to reduce fracture rate, but treatment options for adults are limited. In the Phase 2b ASTEROID trial, setrusumab (a sclerostin neutralizing antibody, SclAb) improved bone density and strength in adults with type I, III, and IV OI. Here, we investigate bone matrix material properties in tetracycline-labeled trans iliac biopsies from 3 groups: (1) control: individuals with no metabolic bone disease, (2) OI: individuals with OI, (3) SclAb-OI: individuals with OI after 6 mo of setrusumab treatment (as part of the ASTEROID trial). In addition to bone histomorphometry, bone mineral and matrix properties were evaluated with nanoindentation, Raman spectroscopy, second harmonic generation imaging, quantitative backscatter electron imaging, and small-angle X-ray scattering. Spatial locations of fluorochrome labels were identified to differentiate inter-label bone of the same tissue age and intra-cortical bone. No difference in collagen orientation was found between the groups. The bone mineral density distribution and analysis of Raman spectra indicate that OI groups have greater mean mineralization, greater relative mineral content, and lower crystallinity than the control group, which was not altered by SclAb treatment. Finally, a lower modulus and hardness were measured in the inter-label bone of the OI-SclAb group compared to the OI group. Previous studies suggest that even though bone from OI has a higher mineral content, the extracellular matrix (ECM) has comparable mechanical properties. Therefore, fragility in OI may stem from contributions from other yet unexplored aspects of bone organization at higher length scales. We conclude that SclAb treatment leads to increased bone mass while not adversely affecting bone matrix properties in individuals with OI.

Individuals with OI, also known as "brittle bone disease," have low bone mass and frequent fractures. Low bone mass occurs due to an imbalance between cells that remove bone and cells that form bone. Pharmaceutical treatments that block removal of bone lead to reduced fracture rates in children with OI. Effective treatment options for adults are limited. Setrusumab is a drug that leads to increased bone mass and strength in adults with OI. Here, we investigate whether setrusumab alters the bone material in addition to improving bone mass. Three groups are compared: individuals with OI treated with setrusumab, individuals with OI not treated with setrusumab, and individuals without OI. A lower modulus and hardness were measured with nanoindentation in the setrusumab-treated group. However, we did not find any changes in the bone's multi-scale structure. Fragility in OI may stem from other yet unexplored aspects of bone organization. We conclude that setrusumab treatment leads to increased bone mass while not adversely affecting bone material properties in individuals with OI.

Bone mechanical properties were altered in a mouse model of multiple myeloma bone disease.

Multiple myeloma bone disease (MMBD) is characterized by the growth of malignant plasma cells in bone marrow, leading to an imbalance in bone (re)modeling favoring excessive resorption. Loss of bone mass and altered microstructure characterize MMBD in humans and preclinical animal models, although, no study to date has examined bone composition or material properties. We hypothesized that MMBD alters bone composition, mineral crystal properties and mechanical properties in the MOPC315.BM.Luc model after intra-tibial injection of myeloma cells and three weeks of daily in vivo tibial loading. Decreased cortical bone elastic modulus and hardness measured by nanoindentation of tibiae were observed in MM-injected mice compared to PBS-injected mice, whereas cortical bone composition, mineral crystal properties measured by Fourier-transform infrared imaging or small angle X-ray scattering, respectively remained unchanged. However, MM-injected mice had thinner cancellous bone mineral particles compared to PBS-injected mice. Mechanical loading did not lead to altered cortical bone composition, mineral structure, or mechanical properties in the context of MM. Unexpectedly, we observed the intra-tibial injection itself altered the material composition of bone, manifested by increased matrix mineralization and crystal size of the hydroxyapatite crystals in the bone matrix. In conclusion, our data suggest that mechanical stimuli can be used as an adjuvant bone anabolic therapy in patients with MMBD to rebuild bone with unaltered composition and mineral structure to reduce subsequent fracture risk.

Resonance Frequency Analysis Identifies Implant- and Host-Related Factors Associated With Bone-Anchored Hearing Implant Stability.

HYPOTHESIS: Resonance frequency analysis (RFA) is a reliable, noninvasive method to assess the stability of bone-anchored hearing implants (BAHIs), although surgical-, implant-, and host-related factors can affect its outcome. BACKGROUND: BAHI plays an important role in restoring hearing function. However, implant- and host-related factors contribute to premature implant extrusion. To mitigate this, noninvasive methods to assess implant stability, along with a better understanding of factors contributing to BAHI failure, are needed. METHODS: We evaluated the utility of RFA to quantify implant stability in sawbone (bone mimicking material), 29 human cadaveric samples, and a prospective cohort of 29 pediatric and 27 adult participants, and identified factors associated with implant stability. To validate the use of RFA in BAHI, we compared RFA-derived implant stability quotient (ISQ) estimates to peak loads obtained from mechanical push-out testing. RESULTS: ISQ and peak loads were significantly correlated (Spearman rho = 0.48, p = 0.0088), and ISQ reliably predicted peak load up to 1 kN. We then showed that in cadaveric samples, abutment length, internal table bone volume, and donor age were significantly associated with implant stability. We validated findings in our prospective patient cohort and showed that minimally invasive Ponto surgery (MIPS; versus linear incision), longer implantation durations (>16 wk), older age (>25 yr), and shorter abutment lengths (≤10 mm) were associated with better implant stability. Finally, we characterized the short-term reproducibility of ISQ measurements in sawbone and patient implants. CONCLUSIONS: Together, our findings support the use of ISQ as a measure of implant stability and emphasize important considerations that impact implant stability, including surgical method, implant duration, age, and abutment lengths.

Tissue material properties, whole-bone morphology and mechanical behavior in the Fbn1 C1041G/+ mouse model of Marfan syndrome.

Marfan syndrome (MFS) is a connective tissue disorder caused by pathogenic mutations in FBN1. In bone, the protein fibrillin-1 is found in the extracellular matrix where it provides structural support of elastic fiber formation, stability for basement membrane, and regulates the bioavailability of growth factors. Individuals with MFS exhibit a range of skeletal complications including low bone mineral density and long bone overgrowth. However, it remains unknown if the bone phenotype is caused by alteration of fibrillin-1's structural function or distortion of its interactions with bone cells. To assess the structural effects of the fibrillin-1 mutation, we characterized bone curvature, microarchitecture, composition, porosity, and mechanical behavior in the Fbn1 C1041G/+ mouse model of MFS. Tibiae of 10, 26, and 52-week-old female Fbn1 C1041G/+ and littermate control (LC) mice were analyzed. Mechanical behavior was assessed via in vivo strain gauging, finite element analysis, ex vivo three-point bending, and nanoindentation. Tibial bone morphology and curvature were assessed with micro computed tomography (µCT). Bone composition was measured with Fourier transform infrared (FTIR) imaging. Vascular and osteocyte lacunar porosity were assessed by synchrotron computed tomography. Fbn1 C1041G/+ mice exhibited long bone overgrowth and osteopenia consistent with the MFS phenotype. Trabecular thickness was lower in Fbn1 C1041G/+ mice but cortical bone microarchitecture was similar in Fbn1 C1041G/+ and LC mice. Whole bone curvature was straighter below the tibio-fibular junction in the medial-lateral direction and more curved above in LC compared to Fbn1 C1041G/+ mice. The bone matrix crystallinity was 4 % lower in Fbn1 C1041G/+ mice compared to LC, implying that mineral platelets in LCs have greater crystal size and perfection than Fbn1 C1041G/+ mice. Structural and mechanical properties were similar between genotypes. Cortical diaphyseal lacunar porosity was lower in Fbn1 C1041G/+ mice compared to LC; this was a result of the average volume of an individual osteocyte lacunae being smaller. These data provide valuable insights into the bone phenotype and its contribution to fracture risk in this commonly used mouse model of MFS.

Setrusumab for the treatment of osteogenesis imperfecta: 12-month results from the phase 2b asteroid study.

Osteogenesis imperfecta (OI) is a rare genetic disorder commonly caused by variants of the type I collagen genes COL1A1 and COL1A2. OI is associated with increased bone fragility, bone deformities, bone pain, and reduced growth. Setrusumab, a neutralizing antibody to sclerostin, increased areal bone mineral density (aBMD) in a 21-week phase 2a dose escalation study. The phase 2b Asteroid (NCT03118570) study evaluated the efficacy and safety of setrusumab in adults. Adults with a clinical diagnosis of OI type I, III, or IV, a pathogenic variant in COL1A1/A2, and a recent fragility fracture were randomized 1:1:1:1 to receive 2, 8, or 20 mg/kg setrusumab doses or placebo by monthly intravenous infusion during a 12-mo treatment period. Participants initially randomized to the placebo group were subsequently reassigned to receive setrusumab 20 mg/kg open label. Therefore, only results from the 2, 8, and 20 mg/kg double-blind groups are presented herein. The primary endpoint of Asteroid was change in distal radial trabecular volumetric bone mineral density (vBMD) from baseline at month 12, supported by changes in high-resolution peripheral quantitative computed tomography micro-finite element (microFE)-derived bone strength. A total of 110 adults were enrolled with similar baseline characteristics across treatment groups. At 12 mo, there was a significant increase in mean (SE) failure load in the 20 mg/kg group (3.17% [1.26%]) and stiffness in the 8 (3.06% [1.70%]) and 20 mg/kg (3.19% [1.29%]) groups from baseline. There were no changes in radial trabecula vBMD (p>05). Gains in failure load and stiffness were similar across OI types. There were no significant differences in annualized fracture rates between doses. Two adults in the 20 mg/kg group experienced related serious adverse reactions. Asteroid demonstrated a beneficial effect of setrusumab on estimates of bone strength across the different types of OI and provides the basis for additional phase 3 evaluation.

Osteogenesis imperfecta (OI), is a rare disorder affecting patients' bones causing pain and an increased chance of the bone breaking. Setrusumab is a possible treatment for OI being studied in a clinical trial called Asteroid. The goal of Asteroid was to determine which dose of setrusumab helped adults with OI the most: 2, 8, or 20 mg/kg. Researchers looked at the density of patients' bones and estimated how strong their bones were before setrusumab and again after 12 mo of treatment to see how they improved with treatment. Researchers could compare these improvements to see which dose of setrusumab helped patients the most. Patients on the highest dose of setrusumab (20 mg/kg) experienced improvements in the density of their arm bones (radius) and leg bones (tibia) after 12 mo. The strength of these bones also improved. The density of other bones including the spine, hip, and the overall skeleton (total body) also improved with treatment. Of patients who had side effects after receiving setrusumab, most were mild or moderate intensity. Overall, setrusumab improved the bones of patients with OI with no serious safety concerns. More studies will include even more patients to see how setrusumab can improve their bones.

When Cortical Bone Matrix Properties Are Indiscernible between Elderly Men with and without Type 2 Diabetes, Fracture Resistance Follows Suit.

Type 2 diabetes mellitus (T2DM) is a metabolic disease affecting bone tissue and leading to increased fracture risk in men and women, independent of bone mineral density (BMD). Thus, bone material quality (i.e., properties that contribute to bone toughness but are not attributed to bone mass or quantity) is suggested to contribute to higher fracture risk in diabetic patients and has been shown to be altered. Fracture toughness properties are assumed to decline with aging and age-related disease, while toughness of human T2DM bone is mostly determined from compression testing of trabecular bone. In this case-control study, we determined fracture resistance in T2DM cortical bone tissue from male individuals in combination with a multiscale approach to assess bone material quality indices. All cortical bone samples stem from male nonosteoporotic individuals and show no significant differences in microstructure in both groups, control and T2DM. Bone material quality analyses reveal that both control and T2DM groups exhibit no significant differences in bone matrix composition assessed with Raman spectroscopy, in BMD distribution determined with quantitative back-scattered electron imaging, and in nanoscale local biomechanical properties assessed via nanoindentation. Finally, notched three-point bending tests revealed that the fracture resistance (measured from the total, elastic, and plastic J-integral) does not significantly differ in T2DM and control group, when both groups exhibit no significant differences in bone microstructure and material quality. This supports recent studies suggesting that not all T2DM patients are affected by a higher fracture risk but that individual risk profiles contribute to fracture susceptibility, which should spur further research on improving bone material quality assessment in vivo and identifying risk factors that increase bone fragility in T2DM. © 2023 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

3D Image Registration Marginally Improves the Precision of HR-pQCT Measurements Compared to Cross-Sectional-Area Registration in Adults With Osteogenesis Imperfecta.

Repositioning error in longitudinal high-resolution peripheral-quantitative computed tomography (HR-pQCT) imaging can lead to different bone volumes being assessed over time. To identify the same bone volumes at each time point, image registration is used. While cross-sectional area image registration corrects axial misalignment, 3D registration additionally corrects rotations. Other registration methods involving matched angle analysis (MA) or boundary transformations (3D-TB) can be used to limit interpolation error in 3D-registering micro-finite-element data. We investigated the effect of different image registration methods on short-term in vivo precision in adults with osteogenesis imperfecta, a collagen-related genetic disorder resulting in low bone mass, impaired quality, and increased fragility. The radii and tibiae of 29 participants were imaged twice on the same day with full repositioning. We compared the precision error of different image registration methods for density, microstructural, and micro-finite-element outcomes with data stratified based on anatomical site, motion status, and scanner generation. Regardless of the stratification, we found that image registration improved precision for total and trabecular bone mineral densities, trabecular and cortical bone mineral contents, area measurements, trabecular bone volume fraction, separation, and heterogeneity, as well as cortical thickness and perimeter. 3D registration marginally outperformed cross-sectional area registration for some outcomes, such as trabecular bone volume fraction and separation. Similarly, precision of micro-finite-element outcomes was improved after image registration, with 3D-TB and MA methods providing greatest improvements. Our regression model confirmed the beneficial effect of image registration on HR-pQCT precision errors, whereas motion had a detrimental effect on precision even after image registration. Collectively, our results indicate that 3D registration is recommended for longitudinal HR-pQCT imaging in adults with osteogenesis imperfecta. Since our precision errors are similar to those of healthy adults, these results can likely be extended to other populations, although future studies are needed to confirm this. © 2022 American Society for Bone and Mineral Research (ASBMR).

Dimorphic Mechanisms of Fragility in Diabetes Mellitus: the Role of Reduced Collagen Fibril Deformation.

Diabetes mellitus (DM) is an emerging metabolic disease, and the management of diabetic bone disease poses a serious challenge worldwide. Understanding the underlying mechanisms leading to high fracture risk in DM is hence of particular interest and urgently needed to allow for diagnosis and treatment optimization. In a case-control postmortem study, the whole 12th thoracic vertebra and cortical bone from the mid-diaphysis of the femur from male individuals with type 1 diabetes mellitus (T1DM) (n = 6; 61.3 ± 14.6 years), type 2 diabetes mellitus (T2DM) (n = 11; 74.3 ± 7.9 years), and nondiabetic controls (n = 18; 69.3 ± 11.5) were analyzed with clinical and ex situ imaging techniques to explore various bone quality indices. Cortical collagen fibril deformation was measured in a synchrotron setup to assess changes at the nanoscale during tensile testing until failure. In addition, matrix composition was analyzed including determination of cross-linking and non-crosslinking advanced glycation end-products like pentosidine and carboxymethyl-lysine. In T1DM, lower fibril deformation was accompanied by lower mineralization and more mature crystalline apatite. In T2DM, lower fibril deformation concurred with a lower elastic modulus and tendency to higher accumulation of non-crosslinking advanced glycation end-products. The observed lower collagen fibril deformation in diabetic bone may be linked to altered patterns mineral characteristics in T1DM and higher advanced glycation end-product accumulation in T2DM. © 2022 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).

Breaking new ground in mineralized tissue: Assessing tissue quality in clinical and laboratory studies.

Mineralized tissues, such as bone and teeth, have extraordinary mechanical properties of both strength and toughness. This mechanical behavior originates from deformation and fracture resistance mechanisms in their multi-scale structure. The term quality describes the matrix composition, multi-scale structure, remodeling dynamics, water content, and micro-damage accumulation in the tissue. Aging and disease result in changes in the tissue quality that may reduce strength and toughness and lead to elevated fracture risk. Therefore, the capability to measure the quality of mineralized tissues provides critical information on disease progression and mechanical integrity. Here, we provide an overview of clinical and laboratory-based techniques to assess the quality of mineralized tissues in health and disease. Current techniques used in clinical settings include radiography-based (radiographs, dual energy x-ray absorptiometry, EOS) and x-ray tomography-based methods (high resolution peripheral quantitative computed tomography, cone beam computed tomography). In the laboratory, tissue quality can be investigated in ex vivo samples with x-ray imaging (micro and nano-computed tomography, x-ray microscopy), electron microscopy (scanning/transmission electron imaging (SEM/STEM), backscattered scanning electron microscopy, Focused Ion Beam-SEM), light microscopy, spectroscopy (Raman spectroscopy and Fourier transform infrared spectroscopy) and assessment of mechanical behavior (mechanical testing, fracture mechanics and reference point indentation). It is important for clinicians and basic science researchers to be aware of the techniques available in different types of research. While x-ray imaging techniques translated to the clinic have provided exceptional advancements in patient care, the future challenge will be to incorporate high-resolution laboratory-based bone quality measurements into clinical settings to broaden the depth of information available to clinicians during diagnostics, treatment and management of mineralized tissue pathologies.

Compressive Strength of Iliac Bone ECM Is Not Reduced in Osteogenesis Imperfecta and Increases With Mineralization.

Osteogenesis imperfecta (OI) is an inheritable, genetic, and collagen-related disorder leading to an increase in bone fragility, but the origin of its "brittle behavior" is unclear. Because of its complex hierarchical structure, bone behaves differently at various length scales. This study aims to compare mechanical properties of human OI bone with healthy control bone at the extracellular matrix (ECM) level and to quantify the influence of the degree of mineralization. Degree of mineralization and mechanical properties were analyzed under dry conditions in 12 fixed and embedded transiliac crest biopsies (control n = 6, OI type I n = 3, OI type IV n = 2, and OI type III n = 1). Mean degree of mineralization was measured by microcomputed tomography at the biopsy level and the mineral-to-matrix ratio was assessed by Raman spectroscopy at the ECM level. Both methods revealed that the degree of mineralization is higher for OI bone compared with healthy control. Micropillar compression is a novel technique for quantifying post-yield properties of bone at the ECM level. Micropillars (d = 5 µm, h = 10 µm) were fabricated using focused ion beam milling and quasi-statically compressed to capture key post-yield properties such as ultimate strength. The qualitative inspection of the stress-strain curves showed that both OI and healthy control bone have a ductile response at the ECM level. The quantitative results showed that compressive strength is not reduced in OI bone and is increasing with OI severity. Nanoindentation measurements revealed that OI bone tends to have a higher Young's modulus, hardness, and dissipated energy compared with healthy bone. Micropillar strength and indentation modulus increased linearly and significantly (p < .0001) with mineral-to-matrix ratio. In conclusion, this study indicates that compressive mechanical properties of dry OI bone at the iliac crest are not inferior to healthy control at the ECM level and increase with mineralization. © 2021 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).