PEPICO analysis of catalytic reactor effluents towards quantitative isomer discrimination: DME conversion over a ZSM-5 zeolite.

The methanol-to-hydrocarbons (MTH) process involves the conversion of methanol, a C1 feedstock that can be produced from green sources, into hydrocarbons using shape-selective microporous acidic catalysts - zeolite and zeotypes. This reaction yields a complex mixture of species, some of which are highly reactive and/or present in several isomeric forms, posing significant challenges for effluent analysis. Conventional gas-phase chromatography (GC) is typically employed for the analysis of reaction products in laboratory flow reactors. However, GC is not suitable for the detection of highly reactive intermediates such as ketene or formaldehyde and is not suitable for kinetic studies under well defined low pressure conditions. Photoelectron-photoion coincidence (PEPICO) spectroscopy has emerged as a powerful analytical tool for unraveling complex compositions of catalytic effluents, but its availability is limited to a handful of facilities worldwide. Herein, PEPICO analysis of catalytic reactor effluents has been implemented at the FinEstBeAMS beamline of MAX IV Laboratory. The conversion of dimethyl ether (DME) on a zeolite catalyst (ZSM-5-MFI27) is used as a prototypical model reaction producing a wide distribution of hydrocarbon products. Since in zeolites methanol is quickly equilibrated with DME, this reaction can be used to probe vast sub-networks of the full MTH process, while eliminating or at least slowing down methanol-induced secondary reactions and catalyst deactivation. Quantitative discrimination of xylene isomers in the effluent stream is achieved by deconvoluting the coincidence photoelectron spectra.

Quantitative microbial risk assessment for ingestion of antibiotic resistance genes from private wells contaminated by human and livestock fecal sources.

We used quantitative microbial risk assessment to estimate ingestion risk for intI1, erm(B), sul1, tet(A), tet(W), and tet(X) in private wells contaminated by human and/or livestock feces. Genes were quantified with five human-specific and six bovine-specific microbial source-tracking (MST) markers in 138 well-water samples from a rural Wisconsin county. Daily ingestion risk (probability of swallowing ≥1 gene) was based on daily water consumption and a Poisson exposure model. Calculations were stratified by MST source and soil depth over the aquifer where wells were drilled. Relative ingestion risk was estimated using wells with no MST detections and >6.1 m soil depth as a referent category. Daily ingestion risk varied from 0 to 8.8 × 10-1 by gene and fecal source (i.e., human or bovine). The estimated number of residents ingesting target genes from private wells varied from 910 (tet(A)) to 1,500 (intI1 and tet(X)) per day out of 12,000 total. Relative risk of tet(A) ingestion was significantly higher in wells with MST markers detected, including wells with ≤6.1 m soil depth contaminated by bovine markers (2.2 [90% CI: 1.1-4.7]), wells with >6.1 m soil depth contaminated by bovine markers (1.8 [1.002-3.9]), and wells with ≤6.1 m soil depth contaminated by bovine and human markers simultaneously (3.1 [1.7-6.5]). Antibiotic resistance genes (ARGs) were not necessarily present in viable microorganisms, and ingestion is not directly associated with infection. However, results illustrate relative contributions of human and livestock fecal sources to ARG exposure and highlight rural groundwater as a significant point of exposure.IMPORTANCEAntibiotic resistance is a global public health challenge with well-known environmental dimensions, but quantitative analyses of the roles played by various natural environments in transmission of antibiotic resistance are lacking, particularly for drinking water. This study assesses risk of ingestion for several antibiotic resistance genes (ARGs) and the class 1 integron gene (intI1) in drinking water from private wells in a rural area of northeast Wisconsin, United States. Results allow comparison of drinking water as an exposure route for antibiotic resistance relative to other routes like food and recreational water. They also enable a comparison of the importance of human versus livestock fecal sources in the study area. Our study demonstrates the previously unrecognized importance of untreated rural drinking water as an exposure route for antibiotic resistance and identifies bovine fecal material as an important exposure factor in the study setting.

Quercetin enhances decidualization through AKT-ERK-p53 signaling and supports a role for senescence in endometriosis.

BACKGROUND: Patients with endometriosis suffer with chronic pelvic pain and infertility, and from the lack of pharmacologic therapies that consistently halt disease progression. Differences in the endometrium of patients with endometriosis vs. unaffected controls are well-documented. Specifically, shed endometrial tissues (delivered to the pelvic cavity via retrograde menstruation) reveal that a subset of stromal cells exhibiting pro-inflammatory, pro-fibrotic, and pro-senescence-like phenotypes is enhanced in endometriosis patients compared to controls. Additionally, cultured biopsy-derived endometrial stromal cells from endometriosis patients exhibit impaired decidualization, a defined differentiation process required for human embryo implantation and pregnancy. Quercetin, a senolytic agent, shows therapeutic potential for pulmonary fibrosis, a disorder attributed to senescent pulmonary fibroblasts. In rodent models of endometriosis, quercetin shows promise, and quercetin improves decidualization in vitro. However, the exact mechanisms are not completely understood. Therefore, we investigated the effects of quercetin on menstrual effluent-derived endometrial stromal cells from endometriosis patients and unaffected controls to define the signaling pathways underlying quercetin's effects on endometrial stromal cells. METHODS: Menstrual effluent-derived endometrial stromal cells were collected and cultured from unaffected controls and endometriosis patients and then, low passage cells were treated with quercetin (25 µM) under basal or standard decidualization conditions. Decidualization responses were analyzed by measuring the production of IGFBP1 and PRL. Also, the effects of quercetin on intracellular cAMP levels and cellular oxidative stress responses were measured. Phosphokinase arrays, western blotting, and flow cytometry methods were performed to define the effects of quercetin on various signaling pathways and the potential mechanistic roles of quercetin. RESULTS: Quercetin significantly promotes decidualization of control- and endometriosis-endometrial stromal cells. Quercetin substantially reduces the phosphorylation of multiple signaling molecules in the AKT and ERK1/2 pathways, while enhancing the phosphorylation of p53 and total p53 levels. Furthermore, p53 inhibition blocks decidualization while p53 activation promotes decidualization. Finally, we provide evidence that quercetin increases apoptosis of endometrial stromal cells with a senescent-like phenotype. CONCLUSIONS: These data provide insight into the mechanisms of action of quercetin on endometrial stromal cells and warrant future clinical trials to test quercetin and other senolytics for treating endometriosis.

Dissolved carbon in effluent of wastewater treatment plants and its potential impacts in the receiving karst river.

The dissolved carbon cycling in river system fueled by wastewater treatment plant effluent have been a research hotspot. However, the composition of dissolved carbon (DC) in wastewater effluents from karst regions remains poorly understood, resulting in a lack of clarity regarding its impact on the dynamics of dissolved carbon in karst rivers. To address this knowledge gap, this study investigated variations of dissolved inorganic (DIC) and organic C (DOC) components in effluent in karst regions and preliminarily discussed their influence on the DC cycling in karst rivers. The results showed that bicarbonate (HCO3-) in WWTP effluents makes more than 90% of the total dissolved inorganic carbon (DIC). The partial pressure of aqueous CO2 (pCO2) of the effluent reached 14450 ± 10084µtam, and pCO2 level declined with increasing river distance from the effluent discharge, effluent acted as a strong CO2 emitter to the atmosphere. Stable carbon isotope and water chemistry evidence revealed that organic matter degradation made important contributions to the high CO2 concentrations in effluent. PHREEQC mixing simulation together with filed samples data indicated that the DIC species can be changed, and pCO2 increased in receiving karst river water after mixed with effluent. The dissolved organic carbon (DOC) of effluent contained humic-like and protein-tryptophan-like, both of them appeared important and recent autochthonous, which could interfere the distinguish the sources of DOC in receiving karst river water. Thus, these findings highlight that the effluent can be an essential factor for the changes of the karst riverine DC pool, which advance our understanding on karst riverine DC evolution under anthropogenic activities. As more than 30% of the earth surface in China, northern America, and Europe are covered by carbonate rocks, this study has relevant implications for other karst regions as it underscores the influence of WWTP effluents on the carbon cycle in karst rivers. Such information and knowledge are valuable for monitoring and managing effluent-receiving river in other karst regions in the world.

Phosphate adsorption on dried alum sludge: Modeling and application to treatment of dairy effluents.

This study evaluates Alum sludge from drinking water treatment plants for the efficient and cost-effective removal of phosphates from aqueous solutions. Extensive characterization and batch experiments have established that optimal phosphate removal was achieved with a sludge dosage of 20 g L-1 (at an initial phosphate concentration of 100 mg L-1), a pH of 5, a temperature of 23 °C, and a stirring speed of 200 rpm. These conditions significantly reduced phosphate levels, ensuring compliance with legal discharge limits. The Langmuir isotherm, pseudo-second-order kinetic and intraparticle diffusion models best described the adsorption process, highlighting the spontaneous and endothermic nature of the phenomenon. The sludge effectively reduced phosphate concentrations to acceptable levels when applied to dairy effluents. This study underscores the potential of Alum sludge as a viable solution for phosphate management in environmental cleanup efforts.

Hyphenated Fenton-column packed nMnO-modified wood biochar for tannery effluent treatment: Adsorption mechanism and reusability study.

Industrial wastewater contains a wide range of pollutants that, if released directly into natural ecosystems, have the potential to pose serious risks to the environment.This study aims to investigate sustainable and efficient approaches for treating tannery wastewater, employing a combination of hyphenated Fenton oxidation and adsorption processes. Rigorous analyses were conducted on wastewater samples, evaluating parameters like COD, sulphide, NH3-N, PO43-, NO3-, and Cr(VI). The performance of this adsorbent material was gauged through column adsorption experiments. A comprehensive characterization of the adsorbent was undertaken using techniques such as SEM, EDX, BET, FTIR, XRD, and LIBS. The study delved into varying operational parameters like bed depth (ranging from 3.5 to 9.5 cm) diameter (2.5 cm) and influent flow rate (ranging from 5 to 15mLmin-1). The experimental outcomes revealed that increasing the bed depth and decreasing the influent flow rate significantly bolstered the adsorption column's effectiveness. Breakthrough curves obtained were fitted with different models, including the Thomas and Yoon-Nelson models. The most optimal column performance was achieved with a bed height of 10.5 cm and a flow rate of 5mLmin-1. The combined process achieved removal efficiencies of 94.5% for COD, 97.4% for sulphide, 96.2% for NH3-N, 83.1% for NO3-, 79.3% for PO43-, and 96.9% for Cr(VI) in tannery effluent. This research presents a notable stride toward the development of sustainable and efficient strategies for tannery wastewater treatment.

Nanomaterials - A promising solution for textile and fossil fuel generated pollutants.

This review approach is divided into two scopes to focus the pollution threats. We cover the applications of nanomaterials to curtail the pollution induced by fossil fuel combustion, and textile dye effluents. Toxic emissions released from automobile exhaust that comprise of NOX. SOX and PAHs compile to harsh breathing and respiratory troubles. The effluents generated from the mammoth textile and leather industry is potential threat to beget massive health issues to human life, and environmental problem. Part I projects the broad envisage on role of nano materials in production of alternative biofuels. In addition, green sources for synthesizing nanomaterials are given special importance. Nano catalyst's utilization in bio-derived fuels such as biogas, bio-oil, bioethanol, and biodiesel are catered to this article. Part II cover the current statistics of textile effluent pollution level in India and its steps in confronting the risks of pollution are discussed. A clear picture of the nano techniques in pre-treatment, and the recent nano related trends pursued in industries to eliminate the dyes and chemicals from the discharges is discussed. The substantial aspect of nano catalysis in achieving emission-free fuel and toxic-free effluents and the augmentation in this field is conferred. This review portrays the dependency on nano materials & technology for sustainable future.

Occurrence, removal, and risk assessment of polycyclic aromatic hydrocarbons and their derivatives in typical wastewater treatment plants.

Wastewater treatment plants (WWTPs) have a certain removal capacity for polycyclic aromatic hydrocarbons (PAHs) and their derivatives, but some of them are discharged with effluent into the environment, which can affect the environment. Therefore, to understand the presence, sources, and potential risks of PAHs and their derivatives in WWTPs. Sixteen PAHs, three chlorinated polycyclic aromatic hydrocarbons (ClPAHs), three oxidized polycyclic aromatic hydrocarbons (OPAHs), and three methylated polycyclic aromatic hydrocarbons (MPAHs) were detected in the influent and effluent water of three WWTPs in China. The average concentrations of their influent ∑PAHs, ∑ClPAHs, ∑OPAHs, and ∑MPAHs ranged from 2682.50 to 2774.53 ng/L, 553.26-906.28 ng/L, 415.40-731.56 ng/L, and 534.04-969.83 ng/L, respectively, and the effluent concentrations ranged from 823.28 to 993.37 ng/L, 269.43-489.94 ng/L, 285.93-463.55 ng/L, and 376.25-512.34 ng/L, respectively. The growth of heat transport and industrial energy consumption in the region has a significant impact on the level of PAHs in WWTPs. According to the calculated removal efficiencies of PAHs and their derivatives in the three WWTPs (A, B, and C), the removal rates of PAHs and their derivatives were 69-72%, 62-71%, and 68-73%, respectively, and for the substituted polycyclic aromatic hydrocarbons (SPAHs), the removal rates were 41-49%, 31-40%, and 33-39%, respectively; moreover, the removal rates of PAHs were greater than those of SPAHs in the WWTPs. The results obtained via the ratio method indicated that the main sources of PAHs in the influent of WWTPs were the combustion of coal and biomass, and petroleum contamination was the secondary source. In risk evaluation, there were 5 compounds for which the risk quotient was considered high ecological risk. During chronic disease evaluation, there were 11 compounds with a risk quotient considered to indicate high risk. PAHs and SPAHs with high relative molecular masses in the effluent of WWTPs pose more serious environmental hazards than their PAHs counterparts.

Impact of effluent parameters and vancomycin concentration on vancomycin resistant Escherichia coli and its host specific bacteriophage lytic activity in hospital effluent.

Vancomycin resistance in bacteria has been classified under high priority category by World Health Organization (WHO) and its presence in hospital effluent is reported to be increasing owing to excess antibiotics use. Among various strategies, bacteriophage has been recently considered as a promising biological agent for combating such antimicrobial resistant bacteria (ARB). However, the influence of effluent's properties on phage-ARB interaction in actual hospital effluent is not completely understood. The present works intends to study this influence of hospital effluent and its parameters on the interaction between vancomycin resistant E. coli (VRE) and its host specific bacteriophage. The isolated VRE was identified by 16S rRNA sequencing, matrix-assisted laser desorption/ionization-time of flight (MALDI - TOF) and whole genome sequencing. The infectivity of phage onto host bacteria was investigated using electron microscopic techniques, dynamic light scattering (DLS), spectrofluorophotometer and confirmed using double agar overlay method. The monovalency and polyvalency of isolated phage against various bacterial species were determined. The phage morphology was identical to T7 phage belonging to Podoviridae. The phage lysis was maximum at pH 7 (90.2%), 37 °C (91.6%) and vancomycin concentration of 50 µg/mL in both synthetic media (89.13%) and effluent (100%). At a maximum vancomycin concentration of 100 µg/mL, decrease in Ca, K, Mg and P (up to 19.70, 14.18, 28, and 15.82% respectively) concentration in effluent was observed due to phage infectivity when compared to control. The whole genome sequencing was performed and the bioinformatics analysis presented the role of mdfA gene encoding the efflux pump in causing vancomycin resistance in E. coli. It also depicted the presence of multiple genes responsible for mercury, cobalt, zinc and cadmium resistance in VRE. These results clearly indicate that bacteriophage mediated combating of VRE is possible in actual hospital effluent and can be used as one of the treatment methods.

Upcycling crab shell waste into biochar for treatment of palm oil mill effluent via microwave pyrolysis and activation.

The escalating consumer demand for crabs results in a growing amount of waste, including shells, claws, and other non-edible parts. The resulting crab shell waste (CSW) is disposed of via incineration or landfills which causes environmental pollution. CSW represents a potential biological resource that can be transformed into valuable resources via pyrolysis technique. In this study, microwave pyrolysis of CSW using self-purging, vacuum, and steam activation techniques was examined to determine the biochar production yield and its performance in treating palm oil mill effluent (POME). The biochar produced through microwave pyrolysis exhibits yields ranging from 50 to 61 wt%, showing a hard texture, low volatile matter content (≤34.1 wt%), and high fixed carbon content (≥58.3 wt%). The KOH-activated biochar demonstrated a surface area of up to 177 m2/g that is predominantly composed of mesopores, providing a good amount of adsorption sites for use as adsorbent. The biochar activated with steam removed 8.3 mg/g of BOD and 42 mg/g of COD from POME. The results demonstrate that microwave pyrolysis of CSW is a promising technology to produce high-quality biochar as an adsorbent for POME treatment.

Functional genomics and taxonomic insights into heavy metal tolerant novel bacterium Brevibacterium metallidurans sp. nov. NCCP-602T isolated from tannery effluent in Pakistan.

The strain designated NCCP-602T was isolated from tannery effluent, and displayed aerobic, gram-positive, rod-shaped cells that were characterized by oxidase negative, catalase positive, and non-motile features. The most favourable growth conditions were observed at a temperature of 30°C, pH 7.0, and NaCl concentration of 1% (w/v). It tolerated heavy metals at high concentrations of chromium (3600 ppm), copper (3300 ppm), cadmium (3000 ppm), arsenic (1200 ppm) and lead (1500 ppm). The results of phylogenetic analysis, derived from sequences of the 16S rRNA gene, indicated the position of strain NCCP-602T within genus Brevibacterium and showed that it was closely related to Brevibacterium ammoniilyticum JCM 17537T. Strain NCCP-602 T formed a robust branch that was clearly separate from closely related taxa. A comparison of 16S rRNA gene sequence similarity and dDDH values between the closely related type strains and strain NCCP-602T provided additional evidence supporting the classification of strain NCCP-602T as a distinct novel genospecies. The polar lipid profile included diphosphatidylglycerol, glycolipid, phospholipids and amino lipids. MK-7 and MK-8 were found as the respiratory quinones, while anteiso-C15:0, iso-C15:0, iso-C16:0, iso-C17:0, and anteiso-C17:0 were identified as the predominant cellular fatty acids (> 10%). Considering the convergence of phylogenetic, phenotypic, chemotaxonomic, and genotypic traits, it is suggested that strain NCCP-602 T be classified as a distinct species Brevibacterium metallidurans sp. nov. within genus Brevibacterium with type strain NCCP-602T (JCM 18882T = CGMCC1.62055T).

Influence of effluent particles and particle-bound micropollutants on the removal of micropollutants and UVA254 in wastewater effluent ozonation.

This study systematically investigated the influence of effluent particles and activated sludge (AS) particles on the removal of micropollutants via wastewater effluent ozonation within typical effluent total suspended solids (TSS) concentrations. A series of batch experiments revealed that particle concentrations up to 30 mg/L had a minor impact on the removal of organic micropollutants (OMPs) in the aqueous phase. Moreover, the reduction of UV absorbance at 254 nm (UVA254) was negatively correlated to the level of particle concentration at ozone doses higher than 0.5 gO3/gDOC. It indicates that UVA254 abatement was more sensitive to the presence of particles compared to OMP removal. Organic micropollutants (OMPs) sorbed on effluent particles and sludge particles were extracted before and after ozonation. OMP sorption in effluent particles was 2-5 times higher than that in sludge particles. During the ozonation of raw secondary effluent, particle-bound micropollutants were removed comparably to the micropollutants in the aqueous phase. This suggests that the boundary layer surrounding the particle didn't affect the removal of OMPs in the particle phase. Furthermore, the removal of existing OMPs (irbesartan, sulfamethoxazole, and metoprolol) in the effluent was used to assess the ozone and •OH exposure. In water samples with and without particles, the elimination of OMPs could be reliably predicted (R² > 0.95) by calculated ozone and •OH exposures.

Assessing relative risks of municipal wastewater disposal options for Southeast Florida.

A comparative assessment of the risks of the three current wastewater effluent disposal options and three other potential options was conducted for Southeast Florida communities. The question was how the risk to humans from the use of potable reuse compares to the other five available wastewater disposal alternatives. The need for this type of risk assessment is due to the potential to use potable reuse as a water supply and the potential resistance from the public as a result of such a proposal. Water quality data relevant to disposal of wastewater treatment plant effluent from South Florida utilities along with water quality data on the receiving waters and drinking water standards were obtained for the project. The comparison of the public health risks associated with these disposal alternatives indicated that health risks associated with deep wells and direct potable reuse were generally lower than those of the other alternatives.

Ecological risk assessment of heavy metals in desulfurized seawater discharged from a coal-fired power plant in Qingdao.

Despite the prevalence of discharge of large volumes of heavy-metal-bearing seawater from coal-fired power plants into adjacent seas, studies on the associated ecological risks remain limited. This study continuously monitored concentrations of seven heavy metals (i.e. As, Cd, Cr, Cu, Hg, Pb, and Zn) in surface seawater near the outfall of a coal-fired power plant in Qingdao, China over three years. The results showed average concentrations of As, Cd, Cr, Cu, Hg, Pb, and Zn of 2.63, 0.33, 2.97, 4.63, 0.008, 0.85, and 25.00 µg/L, respectively. Given the lack of data on metal toxicity to local species, this study investigated species composition and biomass near discharge outfalls and constructed species sensitivity distribution (SSD) curves with biological flora characteristics. Hazardous concentrations for 5% of species (HC5) for As, Cd, Cr, Cu, Hg, Pb, and Zn derived from SSDs constructed from chronic toxicity data for native species were 3.23, 2.22, 0.06, 2.83, 0.66, 4.70, and 11.07 µg/L, respectively. This study further assessed ecological risk of heavy metals by applying the Hazard Quotient (HQ) and Joint Probability Curve (JPC) based on long-term heavy metal exposure data and chronic toxicity data for local species. The results revealed acceptable levels of ecological risk for As, Cd, Hg, and Pb, but unacceptable levels for Cr, Cu, and Zn. The order of studied heavy metals in terms of ecological risk was Cr > Cu ≈ Zn > As > Cd ≈ Pb > Hg. The results of this study can guide the assessment of ecological risk at heavy metal contaminated sites characterized by relatively low heavy metal concentrations and high discharge volumes, such as receiving waters of coal-fired power plant effluents.

Comparative performance of Populus spp. and Salix spp. for growth, nutrition, and heavy metal uptake in a wastewater hydroponic system.

This research aimed to ascertain the growth, biomass, and phytoremediation capacity of poplars and willow cultivated using wastewater in a hydroponic system. The cuttings were exposed to two water treatments for eight weeks: (1) tap water supply with 1/4 strength Hoagland's solution (TW) as a control and (2) urban raw wastewater with 1/4 strength Hoagland's solution (WW) in a completely randomized experimental design and growth parameters and nutrient and heavy metal content distribution in various plant tissues were assessed. Our results suggest that compared with the TW, seven studied species/clones revealed an increase in growth and biomass parameters (stem height by 16.4%, and root, shoot, and total biomass by 37.3%, 26.9%, and 29.3%, respectively) caused by WW treatment, except the root length and stem diameter that remained the same under two water treatments. Poplars and willow showed a remarkable variability in growth and biomass parameters, with the highest stem diameter, stem height, and root, shoot, and total biomass in Populus nigra L. 62.154. Expression of growth responses to WW treatment with tolerance indices (Tis) indicated the tested poplars and willow as highly tolerant (Ti >100%) with no significant differences among them based on this index. Plant analysis showed that WW treatment increased the concentrations of nutrients and heavy metals in the shoots and roots. Overall, under both water treatments, the capability of the tested species/clones to uptake and accumulate micro-nutrients (except copper (Cu) in shoots) and heavy metals (except chromium (Cr) in shoots) in the plant tissues varied noticeably. However, for all tested plants, the roots had higher concentrations of micro-nutrients (iron (Fe), zinc (Zn), and Cu concentrations in the roots were about 36.8%, 107.6%, and 30.1% of that in the shoots, respectively) and heavy metals (nickel (Ni), Cr, and lead (Pb) concentrations in the roots were about 115.3%, 344.2%, and 198.9% of that in the shoots, respectively), suggesting their capability for micro-nutrients and heavy metals rhizofiltration. Concerning obtained results under hydroponic culture, it can be concluded that these poplars and willow might be promising candidates for wastewater applications. However, data obtained by a hydroponic system need to be confirmed in pot and field experiments.

There are limited studies on the reactions of Salicaceae plants in a wastewater hydroponic system. This research can be considerable for preliminary evaluation of Salicaceae plants to estimate their effectiveness in contaminated soils. Furthermore, the growth, biomass, and phytoremediation responses of Salicaceae plants differ to wastewater application, so this work is important to evaluate the responses of seven different poplar and willow species/clones to municipal wastewater application.

Coupling of phycoremediation and phytoremediation technologies to treat tannery effluents with rainwater dilutions.

From tannery effluent (TE) severely polluted with heavy metals (HMs viz., Cr, Cu, Cd, and Pb), hydrophytic phytoextraction remains a challenge as transplanted plants succumb to death on facing acclimatization shock. Current study was aimed at diluting TE with harvested rainwater (HR) for improving HM phytoextraction potential of Phragmites australis (a hydrophyte) assisted with phycoremediation of coupled algae (viz., Oedogonium sp. and Pithophora sp.). The TE:HR dilutions (TEDs) 0, 25, 50, 75, and 100% (v/v) included three sets: set-1 included algae only, set-2 included P. australis only and set-3 included P. australis coupled with combined algal inoculum. Results showed that P. australis assisted with HR dilution and combined algal inoculum showed significantly greater uptake of HMs from each of the TEDs than respective control treatments. Combined algal application in the TEDs proved phycoremediation assistants based on their bioaccumulation factor (BF). The dry biomass of P. australis in TEDs applied with phycoremediation assistants remained greater than uninoculated ones. Overall, HM translocation factor (TF) of P. australis for Cr, Cu, Cd, and Pb remained ≥ 1. The study concludes that HM phytoextraction is substantially increased when concentrated TE is diluted with HR and assisted with phycoremediation of HM tolerant algae.

Use of recycled construction and demolition waste as substrate in constructed wetlands for the wastewater treatment of cheese production.

Recycled building debris has recently emerged as a suitable wetland infill substrate due to its low density, exceptional water absorption capabilities, and high porosity. This study investigated, for the first time, the use of construction demolition wastes (CDW), and rock processing residues (RPR) as substrate materials in vertical-horizontal flow hybrid constructed wetlands for the treatment of cheese production wastewater. Results showed that the use of both CDW as well as RPR, as substrate material, provided an equal or even better quality of treated wastewater compared to the conventional use of gravel as a substrate. High removal efficiencies were recorded for turbidity (CDW: 91-92%, RPR: 97%), solids (CDW: 85-88%, RPR: 96-97%), organic matter (CDW: 79-84%, RPR: 96-98%), and total phosphorus (CDW: 72-76%, RPR: 87%) for both examined recycled materials. During the experiment, different loadings rates (HLR) were tested: 25 mm d-1 and 37.5 mm d-1. Radiological measurements indicate that, their use did not cause toxic effects on the environment, as the amounts of radioactivity found in the effluent of the systems are not significant. Increasing the hydraulic loading rate appeared to have no negative effect on pollutant removal, as the systems and plants were fully acclimated and mature. This approach offers several advantages, including the use of readily available and abundant waste material, potential cost savings, and the environmental benefits of recycling CDW and RPR instead of disposing of them in landfills.

Tackling data challenges in forecasting effluent characteristics of wastewater treatment plants.

In wastewater treatment plants (WWTPs), the stochastic nature of influent wastewater and operational and weather conditions cause fluctuations in effluent quality. Data-driven models can forecast effluent quality a few hours ahead as a response to the influent characteristics, providing enough time to adjust system operations and avoid undesired consequences. However, existing data for training models are often incomplete and contain missing values. On the other hand, collecting additional data by installing new sensors is costly. The trade-off between using existing incomplete data and collecting costly new data results in three data challenges faced when developing data-driven WWTP effluent forecasters. These challenges are to determine important variables to be measured, the minimum number of required data instances, and the maximum percentage of tolerable missing values that do not impede the development of an accurate model. As these issues are not discussed in previous studies, in this research, for the first time, a comprehensive analysis is done to provide answers to these challenges. Another issue that arises in all data-driven modeling is how to select an appropriate forecasting model. This paper addresses these issues by first testing nine machine learning models on data collected from three wastewater treatment plants located in Iran, Australia, and Spain. The most accurate forecaster, Bayesian network, was then used to address the articulated challenges. Key variables in forecasting effluent characteristics were flow rate, total suspended solids, electrical conductivity, phosphorus compounds, wastewater temperature, and air temperature. A minimum of 250 samples was needed during the model training to achieve a great reduction in the forecasting error. Moreover, a steep increase in the error was observed should the portion of missing values exceed 10%. The results assist plant managers in estimating the necessary data collection effort to obtain an accurate forecaster, contributing to the quality of the effluent.

Innovative stimuli-responsive membrane MSF brine rejection dilution by tertiary treated sewage effluent.

In this study, treated wastewater and Multi-Stage Flash (MSF) brine were integrated into the Forward Osmosis (FO) system using pressure stimuli-responsive Nanofiltration (PSRNF) membranes to dilute magnesium, calcium, and sulfate MSF plant brine reject. The deposition of magnesium sulfate and calcium sulfate in the heat exchanger is one of the main issues affecting the performance and efficiency of MSF thermal desalination plants. Reducing the concentration of the divalent ions can minimize scale formation and deposition to a level that allows the MSF plant to operate at high top brine temperature (TBT) and without scale problems. The PSRNF membranes were chosen in the FO process because of their high water permeability, rejection of divalent and monovalent ions, small structure parameter (S), and inexpensiveness compared to commercial FO membranes. Three PSRNF membranes were tested in the FO process with the feed solution facing the active membrane layer to avoid active layer delamination. Although the PSRNF membrane exhibited negligible water flux at 0 bar, it increased when a 2-4 bar was applied to the feed solution. The wastewater temperature was set at 25 °C while 40 °C was the brine operational temperature to mimic the field situation. A maximum average water flux of 39.5 L/m2h was recorded at 4 bar feed pressure when the PSRNF membrane was used for the brine dilution, achieving up to 42% divalent ions dilution at 0.02 kWh/m3 specific power consumption. The average water flux in the PRSNF membrane was 35% higher than that in the commercial TFC FO membrane. Notably, the PSRNF membrane is ten times cheaper than commercial FO membranes. Notably, the PSRNF membrane is ten times cheaper than commercial FO membranes, achieving substantial cost reductions and pioneering advancements in FO purification technology.

Prediction of microbial activity and abundance using interpretable machine learning models in the hyporheic zone of effluent-dominated receiving rivers.

Serving as a vital linkage between surface water and groundwater, the hyporheic zone (HZ) plays a fundamental role in improving water quality and maintaining ecological security. In arid or semi-arid areas, effluent discharge from wastewater treatment facilities could occupy a predominant proportion of the total base flow of receiving rivers. Nonetheless the relationship between microbial activity, abundance and environmental factors in the HZ of effluent-receiving rivers appear to be rarely addressed. In this study, a spatiotemporal field study was performed in two representative effluent-dominated receiving rivers in Xi'an, China. Land use data, physical and chemical water quality parameters of surface and subsurface water were used as predictive variables, while the microbial respiratory electron transport system activity (ETSA), the Chao1 and Shannon index of total microbial community, as well as the Chao1 and Shannon index of denitrifying bacteria community were used as response variables, while ETSA was used as response variables indicating ecological processes and Shannon and Chao1 were utilized as parameters indicating microbial diversity. Two machine learning models were utilized to provide evidence-based information on how environmental factors interact and drive microbial activity and abundance in the HZ at variable depths. The models with Chao1 and Shannon as response variables exhibited excellent predictive performances (R2: 0.754-0.81 and 0.783-0.839). Dissolved organic nitrogen (DON) was the most important factor affecting the microbial functions, and an obvious threshold value of ∼2 mg/L was observed. Credible predictions of models with Chao1 and Shannon index of denitrifying bacteria community as response variables were detected (R2: 0.484-0.624 and 0.567-0.638), with soluble reactive phosphorus (SRP) being the key influencing factor. Fe (Ⅱ) was favorable in predicting denitrifying bacteria community. The ESTA model highlighted the importance of total nitrogen in the ecological health monitoring in HZ. These findings provide novel insights in predicting microbial activity and abundance in highly-impacted areas such as the HZ of effluent-dominated receiving rivers.