One-Step Photochemical Preparation of CdS/Poly(MMA-co-MAA) Composite with Enhanced Photocatalytic Activity.

This paper presents a one-step photochemical method for the preparation of CdS/Poly(MMA-co-MAA) composite photocatalyst, based on the concept of simultaneous photocatalytic polymerization of organic monomers during UV-light induced formation of CdS. The preparation is carried out in an aqueous solution of Na2S2O3, CdSO4, methyl methacrylate (MMA) and methacrylic acid (MAA), under a UV lamp. The continuously formed CdS particles with photocatalytic activity act the role of initiator to directly initiate the copolymerization of MMA and MAA, resulting in the in situ formation of the composite and full contact of the CdS particles with the oxygen-containing groups in the polymer. Taking the photocatalytic degradation of methylene blue as a case study, the composite exhibited significantly higher activity under simulated solar light compared to the pure CdS. By analysis on various data, the enhanced photocatalytic activity is attributed to the enhanced visible light absorption, and especially the high electron-hole separation efficiency caused by the electrostatic interaction between photogenerated holes and carbonyl oxygen atoms with negatively charged features. Furthermore, the composite displays excellent sunlight activity and recyclability, suggesting its potential for practical applications. Such a one-step construction strategy relying only on photo-energy is green, low-cost and promising in obtaining high-performance semiconductor/polymer composite photocatalysts.

Chemical Recycling and Physical Tuning of Necklace-Shaped Polydimethylsiloxanes Bearing Anthracene Dimer Units.

The problem of plastic waste in the environment calls for the development of new polymeric materials designed specifically for easy recycling at the end of their life cycle. Herein, a green polymer system comprising a series of necklace-shaped polydimethylsiloxanes bearing anthracene dimer units is developed. The polymers have low environmental impact and are easily recycled. Further, their flexibility and glass transition temperatures are easy to control. These necklace-shaped inorganic polymers are synthesized by photopolymerizing (dimerizing) anthracene-terminated oligo-dimethylsiloxane monomers. A key achievement of the present work is the successful chemical recovery of the monomers from the polymers through thermal depolymerization, enabling monomer-polymer recycling. By applying equilibrium polymerization with base catalysts, monomers with a controlled distributed chain length are synthesized from monomers with a constant chain length. The necklace-shaped polymers synthesized from these randomized monomers have amorphous structures and readily form transparent films. It is possible to modulate the thermal and mechanical properties of the polymers by controlling the average chain length of the polydimethylsiloxane between the anthracene dimers. This investigation presents a method for the synthesis and cyclic utilization of polymer materials with a wide range of applications, including plastics and elastomers.

Advancing nanoarchitectures of 2D WO3/MXene photoanode for enhanced photoelectrocatalytic oxidation of phenol and arsenic in synthetic wastewater.

The photoelectrocatalytic advanced oxidation process (PEAOP) necessitates high-performing and stable photoanodes for the effective oxidation of complex pollutants in industrial wastewater. This study presents the construction of 2D WO3/MXene heteronanostructures for the development of efficient and stable photoanode. The WO3/MXene heterostructure features well-ordered WO3 photoactive sites anchored on micron-sized MXene sheets, providing an increased visible light active catalytic surface area and enhanced electrocatalytic activities for pollutant oxidation. Phenol, a highly toxic compound, was completely oxidized at an applied potential of 0.8 V vs. RHE under visible light irradiation. Systematic optimization of operational conditions for the photoelectrocatalytic oxidation of phenol was conducted. The phenol oxidation mechanism was elucidated via high-performance liquid chromatography (HPLC) analysis and the identification of intermediate compounds. Additionally, a mixed model of phenol and arsenic (III) in polluted water demonstrated the capability of WO3/MXene photoanode for the simultaneous oxidation of both organic and inorganic pollutants, achieving complete conversion of phenol and As(III) to non-toxic As(V). The WO3/MXene photoanode facilitated water oxidation, generating a substantial amount of O2•- and •OH oxidative species, which are crucial for the concurrent oxidation of phenol and arsenic. Recyclability tests demonstrated a 99% retention of performance, confirming the WO3/MXene photoanode's suitability for long-term operation in PEAOPs. The findings suggest that integrating WO3/MXene photoanodes into water purification systems can enhance economic feasibility, reduce energy consumption, and improve efficiency. This PEAOP offers a viable solution to the critical issue of heavy metal and organic chemical pollution in various water bodies, given its scalability and ability to preserve ecosystems while conserving clean water resources.

A solar-to-chemical conversion efficiency up to 0.26% achieved in ambient conditions.

Artificial photosynthesis in ambient conditions is much less efficient than the solar-to-biomass conversion (SBC) processes in nature. Here, we successfully mimic the NADP-mediated photosynthetic processes in green plants by introducing redox moieties as the electron acceptors in the present conjugated polymeric photocatalyst. The current artificial process substantially promotes the charge carrier separation efficiency and the oxygen reduction efficiency, achieving a photosynthesis rate for converting Earth-abundant water and oxygen in air into hydrogen peroxide as high as 909 µmol⋅g-1⋅h-1 and a solar-to-chemical conversion (SCC) efficiency up to 0.26%. The SCC efficiency is more than two times higher than the average SBC efficiency in nature (0.1%) and the highest value under ambient conditions. This study presents a strategy for efficient SCC in the future.

Highly efficient photosynthesis of hydrogen peroxide in ambient conditions.

Photosynthesis of hydrogen peroxide (H2O2) in ambient conditions remains neither cost effective nor environmentally friendly enough because of the rapid charge recombination. Here, a photocatalytic rate of as high as 114 µmol⋅g-1⋅h-1 for the production of H2O2 in pure water and open air is achieved by using a Z-scheme heterojunction, which outperforms almost all reported photocatalysts under the same conditions. An extensive study at the atomic level demonstrates that Z-scheme electron transfer is realized by improving the photoresponse of the oxidation semiconductor under visible light, when the difference between the Fermi levels of the two constituent semiconductors is not sufficiently large. Moreover, it is verified that a type II electron transfer pathway can be converted to the desired Z-scheme pathway by tuning the excitation wavelengths. This study demonstrates a feasible strategy for developing efficient Z-scheme photocatalysts by regulating photoresponses.

Deferiprone: new environmental perspectives. Insights into its sequestering ability vs. different metal cations.

Deferiprone, generally, is considered an important chelating agent for Fe3+ overload. From a literature data analysis, a lack of information on the interaction of this molecule toward a series of metal cations emerged, inducing to fill out the topic. The complexing ability of deferiprone toward Ca2+, Mg2+, Cd2+ and Pb2+ was studied by potentiometry and 1H NMR spectroscopy, in KCl aqueous solutions at different ionic strength values (0.1 ≤ I/mol dm-3 ≤ 1.0) and T = 298.15 K. The same speciation model featured by the ML, ML2, ML3 and ML(OH) (M = metal and L = deferiprone or DFP) species was obtained for Cd2+ and Pb2+; the formation constants calculated at infinite dilution are: logTß = 7.23±0.02, 12.47±0.03, 16.70±0.04, and -2.53±0.04, respectively for Cd2+ and 9.91±0.01, 15.99±0.02, 19.93±0.05 and 0.99±0.02 for Pb2+. Only two species, namely ML and ML2, were determined for Ca2+ and Mg2+, whose formation constants at infinite dilution are respectively: 3.72±0.01 and 6.50±0.02, for the first one, 5.31±0.01 and 9.58±0.01, for the second. The ligand sequestering ability and affinity toward M2+ were evaluated by determining the pL0.5 and pM parameters at different pHs and ionic strengths. The results suggest that deferiprone has the best complexing and sequestering ability toward Pb2+, followed by Cd2+, Mg2+ and Ca2+, respectively. 1H NMR studies confirmed the DFP affinity for Cd2+ and Pb2+, and in combination with DFT calculations showed that metal cations are bound to the hydroxo-oxo moiety of the pyridinone ring. The data reported in this study provide information on the possible employment of a small molecule like deferiprone, as a chelating and sequestering agent for Pb2+ accumulation or overload from environmental and biological matrices.

Applications of hollow nanostructures in water treatment considering organic, inorganic, and bacterial pollutants.

One of the major issues of modern society is water contamination with different organic, inorganic, and contaminants bacteria. Finding cost-effective and efficient materials and methods for water treatment and environment remediation is among the scientists' most important considerations. Hollow-structured nanomaterials, including hollow fiber membranes, hollow spheres, hollow nanoboxes, etc., have shown an exciting capability for wastewater refinement approaches, including membrane technology, adsorption, and photocatalytic procedure due to their extremely high specific surface area, high porosity, unique morphology, and low density. Diverse hollow nanostructures could potentially eliminate organic contaminants, including dyes, antibiotics, oil/water emulsions, pesticides, and other phenolic compounds, inorganic pollutants, such as heavy metal ions, salts, phosphate, bromate, and other ions, and bacteria contaminations. Here, a comprehensive overview of hollow nanostructures' fabrication and modification, water contaminant classification, and recent studies in the water treatment field using hollow-structured nanomaterials with a comparative attitude have been provided, indicating the privilege abd detriments of this class of nanomaterials. Eventually, the future outlook of employing hollow nanomaterials in water refinery systems and the upcoming challenges arising in scaling up are also propounded.

Comparison of individual and ensemble machine learning models for prediction of sulphate levels in untreated and treated Acid Mine Drainage.

Machine learning was used to provide data for further evaluation of potential extraction of octathiocane (S8), a commercially useful by-product, from Acid Mine Drainage (AMD) by predicting sulphate levels in an AMD water quality dataset. Individual ML regressor models, namely: Linear Regression (LR), Least Absolute Shrinkage and Selection Operator (LASSO), Ridge (RD), Elastic Net (EN), K-Nearest Neighbours (KNN), Support Vector Regression (SVR), Decision Tree (DT), Extreme Gradient Boosting (XGBoost), Random Forest (RF), Multi-Layer Perceptron Artificial Neural Network (MLP) and Stacking Ensemble (SE-ML) combinations of these models were successfully used to predict sulphate levels. A SE-ML regressor trained on untreated AMD which stacked seven of the best-performing individual models and fed them to a LR meta-learner model was found to be the best-performing model with a Mean Squared Error (MSE) of 0.000011, Mean Absolute Error (MAE) of 0.002617 and R2 of 0.9997. Temperature (°C), Total Dissolved Solids (mg/L) and, importantly, iron (mg/L) were highly correlated to sulphate (mg/L) with iron showing a strong positive linear correlation that indicated dissolved products from pyrite oxidation. Ensemble learning (bagging, boosting and stacking) outperformed individual methods due to their combined predictive accuracies. Surprisingly, when comparing SE-ML that combined all models with SE-ML that combined only the best-performing models, there was only a slight difference in model accuracies which indicated that including bad-performing models in the stack had no adverse effect on its predictive performance.

Spontaneous Molecular Bromine Production in Sea-Salt Aerosols.

Bromine chemistry is responsible for the catalytic ozone destruction in the atmosphere. The heterogeneous reactions of sea-salt aerosols are the main abiotic sources of reactive bromine in the atmosphere. Here, we present a novel mechanism for the activation of bromide ions (Br-) by O2 and H2O in the absence of additional oxidants. The laboratory and theoretical calculation results demonstrated that under dark conditions, Br-, O2 and H3O+ could spontaneously generate Br and HO2 radicals through a proton-electron transfer process at the air-water interface and in the liquid phase. Our results also showed that light and acidity could significantly promote the activation of Br- and the production of Br2. The estimated gaseous Br2 production rate was up to 1.55×1010 molecules cm-2 ⋅ s-1 under light and acidic conditions; these results showed a significant contribution to the atmospheric reactive bromine budget. The reactive oxygen species (ROS) generated during Br- activation could promote the multiphase oxidation of SO2 to produce sulfuric acid, while the increase in acidity had a positive feedback effect on Br- activation. Our findings highlight the crucial role of the proton-electron transfer process in Br2 production; here, H3O+ facilitates the activation of Br- by O2, serves as a significant source of atmospheric reactive bromine and exerts a profound impact on the atmospheric oxidation capacity.

Constructing High-Performance Cobalt-Based Environmental Catalysts from Spent Lithium-Ion Batteries: Unveiling Overlooked Roles of Copper and Aluminum from Current Collectors.

Converting spent lithium-ion batteries (LIBs) cathode materials into environmental catalysts has drawn more and more attention. Herein, we fabricated a Co3O4-based catalyst from spent LiCoO2 LIBs (Co3O4-LIBs) and found that the role of Al and Cu from current collectors on its performance is nonnegligible. The density functional theory calculations confirmed that the doping of Al and/or Cu upshifts the d-band center of Co. A Fenton-like reaction based on peroxymonosulfate (PMS) activation was adopted to evaluate its activity. Interestingly, Al doping strengthened chemisorption for PMS (from -2.615 eV to -2.623 eV) and shortened Co-O bond length (from 2.540 Što 2.344 Å) between them, whereas Cu doping reduced interfacial charge-transfer resistance (from 28.347 kΩ to 6.689 kΩ) excepting for the enhancement of the above characteristics. As expected, the degradation activity toward bisphenol A of Co3O4-LIBs (0.523 min-1) was superior to that of Co3O4 prepared from commercial CoC2O4 (0.287 min-1). Simultaneously, the reasons for improved activity were further verified by comparing activity with catalysts doped Al and/or Cu into Co3O4. This work reveals the role of elements from current collectors on the performance of functional materials from spent LIBs, which is beneficial to the sustainable utilization of spent LIBs.

Flow Electrochemistry for the N-Nitrosation of Secondary Amines.

A flow electrochemical method towards the synthesis of N-nitroso compounds from secondary amines using cheap and readily available sodium nitrite has been developed. Sodium nitrite dissolved in aqueous acetonitrile made additional electrolytes unnecessary. This mild and straightforward approach made the use of acids or other harsh and toxic chemicals redundant. This procedure was applied to an assortment of cyclic and acyclic secondary amines (27 examples) resulting in yields of N-nitrosamines as high as 99 %. To demonstrate the practicality of the process, scaled-up reactions were performed. Finally, selected products could be purified by using an in-line acidic extraction.

A family of kojic acid derivatives aimed to remediation of Pb2+ and Cd2.

The present work analyzes the complex formation ability towards Pb2+ and Cd2+ of a series of kojic acid derivatives that join the chelating properties of the pyrone molecules and those of polyamines, with the aim of evaluating how the different effects of oxygen and nitrogen coordinating groups act on the stability of metal complexes. Experimental research is carried out using potentiometric and spectrophotometric techniques supported by 1H and 13C NMR spectroscopy and DFT calculations. Actually, a different coordination mechanism toward Pb2+ and Cd2+ was proved: in the case of Pb2+, coordination takes place exclusively via the oxygen atoms, while the contribute of the nitrogen atoms appears relevant in the case of Cd2+. Lead complexes of all the studied ligands are characterized by significantly stronger stability than those of cadmium. Finally, on the basis of the measured complex formation stabilities, some of the proposed molecules seems promising effective ligands for lead and cadmium ion decorporation from polluted soils or waste waters.

Regulating Relative Nitrogen Locations of Diazine Functionalized Covalent Organic Frameworks for Overall H2 O2 Photosynthesis.

Nitrogen-heterocycle-based covalent organic frameworks (COFs) are considered promising candidates for the overall photosynthesis of hydrogen peroxide (H2 O2 ). However, the effects of the relative nitrogen locations remain obscured and photocatalytic performances of COFs need to be further improved. Herein, a collection of COFs functionalized by various diazines including pyridazine, pyrimidine, and pyrazine have been judiciously designed and synthesized for photogeneration of H2 O2 without sacrificial agents. Compared with pyrimidine and pyrazine, pyridazine embedded in TpDz tends to stabilize endoperoxide intermediate species, leading toward the more efficient direct 2e- oxygen reduction reaction (ORR) pathway. Benefiting from the effective electron-hole separation, low charge transfer resistance, and high-efficiency ORR pathway, an excellent production rate of 7327 µmol g-1 h-1 and a solar-to-chemical conversion (SCC) value of 0.62 % has been achieved by TpDz, which ranks one of the best COF-based photocatalysts. This work might shed fresh light on the rational design of functional COFs targeting photocatalysts in H2 O2 production.

Catalyst-Free Photochemical Activation of Peroxymonosulfate in Xanthene-Rich Systems for Fenton-Like Synergistic Decontamination: Efficacy of Proton Transfer Process.

Catalyst-free visible light assisted Fenton-like catalysis offers opportunities to achieve the sustainable water decontamination, but the synergistic decontamination mechanisms are still unclear, especially the effect of proton transfer process (PTP). The conversion of peroxymonosulfate (PMS) in photosensitive dye-enriched system was detailed. The photo-electron transfer between excited dye and PMS triggered the efficient activation of PMS and enhanced the production of reactive species. Photochemistry behavior analysis and DFT calculations revealed that PTP was the crucial factor to determine the decontamination performance, leading to the transformation of dye molecules. The excitation process inducing activation of whole system was composed of low energy excitations, and the electrons and holes were almost contributed by LUMO and HOMO. This work provided new ideas for the design of catalyst-free sustainable system for efficient decontamination.

A novel workflow for semi-quantification of emerging contaminants in environmental samples analyzed by LC-HRMS.

There is an increasing need for developing a strategy to quantify the newly identified substances in environmental samples, where there are not always reference standards available. The semi-quantitative analysis can assist risk assessment of chemicals and their environmental fate. In this study, a rigorously tested and system-independent semi-quantification workflow is proposed based on ionization efficiency measurement of emerging contaminants analyzed in liquid chromatography-high-resolution mass spectrometry. The quantitative structure-property relationship (QSPR)-based model was built to predict the ionization efficiency of unknown compounds which can be later used for their semi-quantification. The proposed semi-quantification method was applied and tested in real environmental seawater samples. All semi-quantification-related calculations can be performed online and free of access at http://trams.chem.uoa.gr/semiquantification/ .

Microbial Degradation of 2-Methylisoborneol in Forest Soil.

Microorganisms use a complex array of chemical compounds to interact with their surroundings. They produce and process different molecules in response to changes in the environment or in their metabolism. One of the most well-known volatile organic compounds produced by microorganisms is the C11-terpenoid 2-methylisoborneol (2-MIB), which has received attention because of the off-flavor it confers to fresh and reservoir water as well as to cultured fish. Cleaning water supplies of the off-flavor 2-MIB has been of interest for the scientific community for years, with the use of techniques that are either expensive, e. g., activated carbon, or create toxic byproducts, e. g., ozonation. In the present study, soil samples from nature were collected from a forest and the volatile organic compounds produced by microbes were extracted and analyzed with focus on non-canonical terpenoid structures. HS-SPME-GC/MS analysis of soil samples revealed 1-methylcamphene (1-MC), 2-methylenebornane (2-MB) and 2-MIB as C11-terpenoids. Due to the high 1-MC/2-MIB ratio compared to previous reports, it was hypothesized that microbial degradation of 2-MIB was in place. Addition of synthetic 2-MIB to biologically active soil revealed complete degradation of the pollutant to 2-MB, 1-MC and 2-methyl-2-bornene (2-M2B). The results suggest the potential of using respective natural microorganisms for biodegradation of 2-MIB, with applications in water treatment, fishery and soil ecology.

The Spectroscopic Characterization of Halogenated Pollutants through the Interplay between Theory and Experiment: Application to R1122.

In the last decade, halogenated ethenes have seen an increasing interest for different applications; in particular, in refrigeration, air-conditioning and heat pumping. At the same time, their adverse effects as atmospheric pollutants require environmental monitoring, especially by remote sensing spectroscopic techniques. For this purpose, an accurate characterization of the spectroscopic fingerprint-in particular, those of relevance for rotational-vibrational spectroscopy-of the target molecules is strongly needed. This work provides an integrated computational-theoretical investigation on R1122 (2-Chloro-1,1-difluoro-ethylene, ClHC=CF2), a compound widely employed as a key intermediate in different chemical processes. State-of-the-art quantum chemical calculations relying on CCSD(T)-based composite schemes and hybrid CCSD(T)/DFT approaches are used to obtain an accurate prediction of the structural, rotational and vibrational spectroscopic properties. In addition, the equilibrium geometry is obtained by exploiting the semi-experimental method. The theoretical predictions are used to guide the analysis of the experimentally recorded gas-phase infrared spectrum, which is assigned in the 400-6500 cm-1 region. Furthermore, absorption cross sections are accurately determined over the same spectral range. Finally, by using the obtained spectroscopic data, a first estimate of the global warming potential of R1122 vibrational spectra is obtained.

A Model Assessment of the Occurrence and Reactivity of the Nitrating/Nitrosating Agent Nitrogen Dioxide (•NO2) in Sunlit Natural Waters.

Nitrogen dioxide (•NO2) is produced in sunlit natural surface waters by the direct photolysis of nitrate, together with •OH, and upon the oxidation of nitrite by •OH itself. •NO2 is mainly scavenged by dissolved organic matter, and here, it is shown that •NO2 levels in sunlit surface waters are enhanced by high concentrations of nitrate and nitrite, and depressed by high values of the dissolved organic carbon. The dimer of nitrogen dioxide (N2O4) is also formed in the pathway of •NO2 hydrolysis, but with a very low concentration, i.e., several orders of magnitude below •NO2, and even below •OH. Therefore, at most, N2O4 would only be involved in the transformation (nitration/nitrosation) of electron-poor compounds, which would not react with •NO2. Although it is known that nitrite oxidation by CO3•- in high-alkalinity surface waters gives a minor-to-negligible contribution to •NO2 formation, it is shown here that NO2- oxidation by Br2•- can be a significant source of •NO2 in saline waters (saltwater, brackish waters, seawater, and brines), which offsets the scavenging of •OH by bromide. As an example, the anti-oxidant tripeptide glutathione undergoes nitrosation by •NO2 preferentially in saltwater, thanks to the inhibition of the degradation of glutathione itself by •OH, which is scavenged by bromide in saltwater. The enhancement of •NO2 reactions in saltwater could explain the literature findings, that several phenolic nitroderivatives are formed in shallow (i.e., thoroughly sunlit) and brackish lagoons in the Rhône river delta (S. France), and that the laboratory irradiation of phenol-spiked seawater yields nitrophenols in a significant amount.

Molecularly Engineered Covalent Organic Frameworks for Hydrogen Peroxide Photosynthesis.

Synthesizing H2 O2 from water and air via a photocatalytic approach is ideal for efficient production of this chemical at small-scale. However, the poor activity and selectivity of the 2 e- water oxidation reaction (WOR) greatly restricts the efficiency of photocatalytic H2 O2 production. Herein we prepare a bipyridine-based covalent organic framework photocatalyst (denoted as COF-TfpBpy) for H2 O2 production from water and air. The solar-to-chemical conversion (SCC) efficiency at 298 K and 333 K is 0.57 % and 1.08 %, respectively, which are higher than the current reported highest value. The resulting H2 O2 solution is capable of degrading pollutants. A mechanistic study revealed that the excellent photocatalytic activity of COF-TfpBpy is due to the protonation of bipyridine monomer, which promotes the rate-determining reaction (2 e- WOR) and then enhances Yeager-type oxygen adsorption to accelerate 2 e- one-step oxygen reduction. This work demonstrates, for the first time, the COF-catalyzed photosynthesis of H2 O2 from water and air; and paves the way for wastewater treatment using photocatalytic H2 O2 solution.

Ball Milling Solid-State Synthesis of Highly Crystalline Prussian Blue Analogue Na2-x MnFe(CN)6 Cathodes for All-Climate Sodium-Ion Batteries.

With a series of merits, Prussian blue analogs (PBAs) have been considered as superior cathode materials for sodium-ion batteries (SIBs). Their commercialization, however, still suffers from inferior stability, considerable [Fe(CN)6 ] defects and interstitial water in the framework, which are related to the rapid crystal growth. Herein, a "water-in-salt" nanoreactor is proposed to synthesize highly crystallized PBAs with decreased defects and water, which show both superior specific capacity and rate capability in SIBs. The air-stability, all-climate, and full-cell properties of our PBA have also been evaluated, and it exhibits enhanced electrochemical performance and higher volume yield than its counterpart synthesized via the water-based co-precipitation method. Furthermore, their highly reversible sodium-ion storage behavior has been measured and identified via multiple in situ techniques. This work could pave the way for the PBA-based SIBs in grid-scale energy-storage systems.