Characterization of Fe-Containing and Pb-Containing Nanoparticles Resulting from Corrosion of Plumbing Materials in Tap Water Using a Hyphenated ATM-DMA-spICP-MS System.

Single-particle inductively coupled plasma mass spectrometry (spICP-MS) has been used to characterize metallic nanoparticles (NPs) assuming that all NPs are spherical and composed of pure element. However, environmental NPs generally do not meet these criteria, suggesting that spICP-MS may underestimate their true sizes. This study employed a system hyphenating the atomizer (ATM), differential mobility analyzer (DMA), and spICP-MS to characterize metallic NPs in tap water. Its performance was validated by using reference Au nanoparticles (AuNPs) and Ag-shelled AuNPs. The hyphenated system can determine the actual size and metal composition of both NPs with additional heating after ATM, while stand-alone spICP-MS misidentified the Ag-shelled AuNPs as smaller individual AgNPs and AuNPs. Dissolved metal ions could introduce artifact NPs after heating but could be eliminated by centrifugation. The hyphenated system was applied to characterize Fe-containing and Pb-containing NPs resulting from the corrosion of plumbing materials in tap water. The mode sizes of Fe-containing and Pb-containing NPs were determined to be 110 and 100 nm and the particle number concentrations were determined to be 4.99 × 107 and 1.40 × 106 #/mL, respectively. Cautions should be paid to potential changes in particle size induced by heating for metallic NPs with a low melting point or a high organic content.

Migration of silver nanoparticles from plastic materials, with antimicrobial action, destined for food contact.

Five materials with antimicrobial function, by adding silver, were investigated to evaluate total silver concentration in the polymers and migration of silver nanoparticles from the materials in contact with food. The migration test was carried out by contacting plastic material with food simulant. Migration concentrations and average silver particle sizes were determined by mass spectrometry with inductively coupled plasma, performed in single particle mode (spICP-MS). Additionally, silver particles size and shape were characterized by scanning electron microscopy (SEM) with chemical identification by energy-dispersive X-ray spectroscopy (EDS). Most of samples showed detectable total silver concentrations and all samples showed migration of silver nanoparticles, with concentrations found between 0.00433 and 1.35 ng kg-1. Indeed, the migration study indicated the presence of silver nanoparticles in all food simulants, with sizes bellow 95 nm. The average particle size determined for acetic acid was greater than that observed in the other simulants. In the images obtained by SEM/EDS also confirmed the presence of spherical silver nanoparticles, between 17 and 80 nm. The findings reported herein will aid the health area concerning of human health risk assessments, aiming at regulating this type of material from a food safety point of view.

High-efficiency mechanically assisted alkaline extraction of nanoparticles from biological tissues for spICP-MS analysis.

The widespread use and increased exposure of nanoparticles call for technology to quantify their concentration and size distribution in biological matrices. As ex situ evaluation, facile extraction with high fidelity and efficiency is critical. In this work, single particle inductively coupled plasma mass spectrometry (spICP-MS) was used for nanoparticle number and distribution analysis, where a facile and highly efficient mechanically assisted alkaline digestion has been developed to extract nanoparticles at low alkali concentration. The optimization was performed using chicken tissues in vitro mixed with 30 nm gold nanoparticles, mixture of 30 nm and 60 nm gold nanoparticles, and 45 nm silver nanoparticles, respectively, which is, then, mechanically ground to form tissue homogenate and 2% TMAH is added. The nanoparticles are extracted with a recovery of more than 94% for all the spiked nanoparticle tissue samples. The extraction method has also been attempted to be applied to extract single-sized gold nanoparticles from various organs of mice mixed in vivo with the nanoparticles through intravenous injection, and led to consistent results with acid digestion. Mice injected intravenously with double-sized gold nanoparticle mixture were also studied, further showing that gold nanoparticles of 30 nm and 60 nm have no significant difference in their biodistribution in the same organ. To the best of our knowledge, this is the first attempt for multiple nanoparticles being extracted simultaneously and measured quantitatively from various organs, such as the heart, liver, spleen, lungs, and kidneys. We believe this method is beneficial to the safety assessment and toxicokinetics studies for nanoparticles in tissues.

Dietary exposure of zinc oxide nanoparticles (ZnO-NPs) from canned seafood by single particle ICP-MS: Balancing of risks and benefits for human health.

The present study aims to give information regarding the quantification of ZnO-NPs in canned seafood, which may be intentionally or unintentionally added, and to provide a first esteem of dietary exposure. Samples were subjected to an alkaline digestion and assessment of ZnO-NPs was performed by the single particle ICP-MS technique. ZnO-NPs were found with concentrations range from 0.003 to 0.010 mg/kg and a size mean range from 61.3 and 78.6 nm. It was not observed a clear bioaccumulation trend according to trophic level and size of seafood species, although the mollusk species has slightly higher concentrations and larger size. The number of ZnO-NPs/g does not differ significantly among food samples, observing an average range of 5.51 × 106 - 9.97 × 106. Dissolved Zn determined with spICP-MS revealed comparable concentration to total Zn determined with ICP-MS in standard mode, confirming the efficiency of alkaline digestion on the extraction of the Zn. The same accumulation trend found for ZnO-NPs was observed more clearly for dissolved Zn. The ZnO-NPs intake derived from a meal does not differ significantly among seafood products and it ranges from 0.010 to 0.031 µg/kg b.w. in adult, and from 0.022 to 0.067 µg/kg b.w. in child. Conversely, the intake of dissolved Zn is significantly higher if it is assumed a meal of mollusks versus the fish products, with values of 109.3 µg/kg b.w. for adult and 240.1 µg/kg b.w. for child. Our findings revealed that ZnO-NPs have the potential to bioaccumulate in marine organisms, and seafood could be an important uptake route of ZnO-NPs. These results could be a first important step to understand the ZnO-NPs human dietary exposure, but the characterization and quantification of ZnO-NPs is necessary for a large number of food items.

Optimization of elemental selenium (Se(0)) determination in yeasts by anion-exchange HPLC-ICP-MS.

An analytical method was developed for the speciation of elemental selenium (Se(0)) in selenized yeasts by anion-exchange HPLC-ICP-MS after its chemical transformation into SeSO32- by reaction with sodium sulfite. The presence of Se(0) in the yeasts was further confirmed by single-particle ICP-MS. Indeed, Se nanoparticles, if present, are expected to be, at least partly, Se(0). X-ray photoelectron spectroscopy, a well-recognized technique for chemical element speciation in the solid state, was also used with this objective. Both methods were able to confirm the presence of Se(0) in the selenized yeasts but failed to provide reliable quantitative results. Analytical performances of the HPLC-ICP-MS method were then evaluated for Se(0) determination. Quantification limits of 1 mg/kg were reached. The recovery levels from an added quantity comprised between 93 and 101%. Within-run and between-run precisions were both below 8%. The procedure developed was finally applied to quantify Se(0) content in a series of seven yeast batches from different suppliers. Se(0) was found to be present in all the studied yeasts and represented on average 10-15% of the total Se.

Detection of nanoparticles by single-particle ICP-MS with complete transport efficiency through direct nebulization at few-microlitres-per-minute uptake rates.

Measurement of nanoparticle (NP) concentration and size by single-particle inductively coupled plasma mass spectrometry (spICP-MS) usually requires the use of a NP reference material to determine the loss of NPs and/or ions during their transport from the sample solution to the detection system. The determination of this loss, qualified as nebulization efficiency (ηNebulization) and/or transport efficiency (ηTransport), is time-consuming, costly and lacks reliability. Nebulization of the NPs directly into the plasma (without a spray chamber) results in ηNebulization = 100% and is thus a promising strategy to avoid these calibration steps. In this work, we used the µ-dDIHEN introduction system: a demountable direct injection high-efficiency nebulizer (dDIHEN) hyphenated to a flow-injection valve and a gas displacement pump. For the first time with a continuous flow nebulizer, complete transport efficiency was reached (i.e. ηTransport = 100%). Operated at a very low uptake rate (as low as 8 µL min-1), the µ-dDIHEN accurately and reproducibly determined average diameters of Au-, Ag- and Pt-NPs, in full agreement with their reference values. It was also successfully tested for Au-NPs in complex matrices, such as surface waters. spICP-MS analyses with the µ-dDIHEN sample introduction system only require a dissolved standard calibration to determine NP average diameter (dNPs in nm) and number concentration (NNPs) from the simplified set of equations: [Formula: see text] and [Formula: see text]Graphical abstract.

High transport efficiency of nanoparticles through a total-consumption sample introduction system and its beneficial application for particle size evaluation in single-particle ICP-MS.

In order to facilitate reliable and efficient determination of both the particle number concentration (PNC) and the size of nanoparticles (NPs) by single-particle ICP-MS (spICP-MS) without the need to correct for the particle transport efficiency (TE, a possible source of bias in the results), a total-consumption sample introduction system consisting of a large-bore, high-performance concentric nebulizer and a small-volume on-axis cylinder chamber was utilized. Such a system potentially permits a particle TE of 100 %, meaning that there is no need to include a particle TE correction when calculating the PNC and the NP size. When the particle TE through the sample introduction system was evaluated by comparing the frequency of sharp transient signals from the NPs in a measured NP standard of precisely known PNC to the particle frequency for a measured NP suspension, the TE for platinum NPs with a nominal diameter of 70 nm was found to be very high (i.e., 93 %), and showed satisfactory repeatability (relative standard deviation of 1.0 % for four consecutive measurements). These results indicated that employing this total consumption system allows the particle TE correction to be ignored when calculating the PNC. When the particle size was determined using a solution-standard-based calibration approach without an NP standard, the particle diameters of platinum and silver NPs with nominal diameters of 30-100 nm were found to agree well with the particle diameters determined by transmission electron microscopy, regardless of whether a correction was performed for the particle TE. Thus, applying the proposed system enables NP size to be accurately evaluated using a solution-standard-based calibration approach without the need to correct for the particle TE.

Practical utilization of spICP-MS to study sucrose density gradient centrifugation for the separation of nanoparticles.

Single particle inductively coupled plasma mass spectrometry (spICP-MS) is shown to be a practical technique to study the efficacy of rate-zonal sucrose density gradient centrifugation (SDGC) separations of mixtures of gold nanoparticles (AuNPs) in liquid suspension. spICP-MS enabled measurements of AuNP size distributions and particle number concentrations along the gradient, allowing unambiguous evaluations of the effectiveness of the separation. Importantly, these studies were conducted using AuNP concentrations that are directly relevant to environmental studies (sub ng mL-1). At such low concentrations, other techniques [e.g., dynamic light scattering (DLS), transmission and scanning electron microscopies (TEM and SEM), UV-vis spectroscopy, atomic force microscopy (AFM)] do not have adequate sensitivity, highlighting the inherent value of spICP-MS for this and similar applications. In terms of the SDGC separations, a mixture containing three populations of AuNPs, having mean diameters of 30, 80, and 150 nm, was fully separated, while separations of two other mixtures (30, 60, 100 nm; and 20, 50, 100 nm) were less successful. Finally, it is shown that the separation capacity of SDGC can be overwhelmed when particle number concentrations are excessive, an especially relevant finding in view of common methodologies taken in nanotechnology research. Graphical Abstract Characterization of the separation of a gold nanoparticle mixture by sucrose density gradient centrifugation by conventional and single particle ICP-MS analysis.

Direct evidence for the occurrence of indigenous cadmium-based nanoparticles in paddy soils.

Speciation of heavy metal-based nanoparticles (NPs) in paddy soils greatly determines their fate and potential risk towards food safety. However, quantitative understanding of such distinctive species remains challenging, because they are commonly presented at trace levels (e.g., sub parts-per-million) and extremely difficult to be fractionated in soil matrices. Herein, we propose a state-of-art non-destructive strategy for effective extraction and quantification of cadmium (Cd)-NPs - the most widespread heavy metal in paddy soils - by employing single particle inductively coupled plasma mass spectrometry (spICP-MS) and tetrasodium pyrophosphate (TSPP) as the extractant. Acceptable extraction efficiencies (64.7-80.4 %) were obtained for spiked cadmium sulfide nanoparticles (CdS-NPs). We demonstrate the presence of indigenous Cd-NPs in all six Cd-contaminated paddy soils tested, with a number concentration ranging from 2.20 × 108 to 3.18 × 109 particles/g, representing 17.0-50.4 % of the total Cd content. Furthermore, semi-spherical and irregular CdS-NPs were directly observed as an important form of the Cd-NPs in paddy soils, as characterized by transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy (TEM-EDX). This research marks a significant step towards directly observing indigenous Cd-NPs at trace levels in paddy soil, offering a useful tool for quantitative understanding of the biogeochemical cycling of heavy metal-based NPs in complex matrices.

Characterisation of titanium dioxide (nano)particles in foodstuffs and E171 additives by single particle inductively coupled plasma-tandem mass spectrometry using a highly efficient sample introduction system.

This study addressed primarily the characterisation and quantification of titanium dioxide (TiO2) (nano)particles (NPs) in a large variety of commercial foodstuffs. The samples were purchased from local markets in Spain before the ban of TiO2 food additive (E171) in the EU. The analyses were carried out by single particle inductively coupled plasma-tandem mass spectrometry (spICP-MS/MS) in mass shift mode (oxidation of 48Ti to 48Ti16O (m/z = 64)) and using a highly efficient sample introduction system (APEX™ Ω). This novel analytical approach allowed accurate characterisation of a large panel of TiO2 NPs sizes ranging from ∼12 to ∼800 nm without isobaric interferences from 48Ca isotope, which is highly abundant in most of the analysed foodstuffs. TiO2 NPs were extracted from foodstuffs using sodium dodecyl sulphate (0.1%, w/v) and diluted with ultra-pure water to reach ∼ 1000 particles signals per acquisition. All the analysed samples contained TiO2 NPs with concentrations ranging from 1010 to 1014 particles kg-1, but with significant low recoveries compared to the total Ti determination. A selection of samples was also analysed using a similar spICP-MS/MS approach with a conventional sample introduction system. The comparison of results highlighted the improvement of the limit of detection in size (12 nm) by the APEX™ Ω system, providing nanoparticulate fractions ranging from ∼4% (cheddar sauce) up to ∼87% (chewing gum), which is among the highest nanoparticulate fractions reported in literature using a spICP-MS approach. In addition, two commercially available E171 additives were analysed using the previous approaches and other techniques in different European laboratories with the aim of methods inter-comparison. This study provides occurrence data related to TiO2 NPs in common commercial foodstuffs but it also demonstrates the potential of the novel analytical approach based on APEX™-ICP-MS/MS to characterise nano-size TiO2 particles in complex matrices such as foodstuffs.

Ion-exchange resins improve the analysis of metal nanoparticles in wastewater using single-particle inductively coupled plasma-mass spectrometry.

Improved measurement and analysis technologies are needed for investigating nanoparticle generation characteristics in sewage treatment plants. Single-particle inductively coupled plasma-mass spectrometry (spICP-MS) can be used to analyze metal nanoparticle characteristics. However, during spICP-MS analysis of environmental samples, high concentrations of ionic materials obscure the signals of particulate materials by increasing background signals. This can increase the threshold value for separating background and particle signals and increase the background-equivalent diameter (BED). In this study, particle size distributions in influent and effluent collected from sewage treatment plants were investigated using an improved spICP-MS method combining spICP-MS with ion-exchange resin (IER) column pretreatment. The ion removal effect of the IER column was first examined using a synthetic mixture of Ag nanoparticles (AgNPs) and ions. The method was then applied to wastewater from six different sewage treatment plants using an optimal IER packing of 5 g. The ion removal efficiency for samples containing a proper mixture of AgNPs and Ag ions was 99.98%, and the BED significantly decreased from 73.0 ± 1.0 to 6.1 ± 0.3 nm. Particle size distributions measured in the treatment plant influent and effluent ranged from 28.5 nm (Co) to 220.3 nm (Mg) and from 26.8 nm (Co) to 291.8 nm (Mg), respectively. spICP-MS/IER enabled the detection of smaller particles by removing ions from the sample and significantly decreasing the size detection limit. The results of this study offer a reference for developing predictive models for removing metal nanoparticles during sewage/wastewater treatment.

Development of a fast and low-cost aqueous based-extraction protocol for the simultaneous extraction and characterization of SiO2 and TiO2 (nano)particles in confectionary products.

BACKGROUND: The determination of (nano)particulate content from food additives has been a long-standing concern for authorities since it is of vital importance for ensuring food safety, regulatory adherence, and transparent consumer information. Nonetheless, a critical step in these determinations is the refinement of a careful and quantitative extraction process for particles that may be found within complex matrices such as confectionery products. The development of new technologies and analysis methods for nanoparticles is ongoing. Whereas new technologies and analysis methods for nanoparticles are being developed, the extraction of (nano)particles of different nature has not been adequately addressed in the literature. RESULTS: A simple aqueous extraction procedure was found to be suitable for the simultaneous extraction of TiO2 and SiO2 (nano)particles from five confectionery products. Neither the extraction agents (water, lipase, pancreatin and Tris-HCl solutions) nor the methods (manual shaking, ultrasonic bath, ultrasonic probe and ultrafiltration) altered the size, morphology, or aggregation state of either type of particle, as revealed by the micrographs obtained by Transmission Electron Microscopy (TEM). Single-particle ICP-MS (spICP-MS) determined that the optimal conditions for extracting both types of particles involve manual shaking using water as the solvent. Furthermore, the use of enzymes seemed to hinder the determination of both types of particles by spICP-MS. (Nano)particles of TiO2 and SiO2 were detected in all the confectionaries, even though the E171 additive was only labeled in one of them. The average percentage of nanoparticulate TiO2 material in the evaluated products was 30 %, while no nanometer-sized particles of SiO2 were detected. SIGNIFICANCE: Ensuring food safety, regulatory compliance and transparent consumer information relies on getting reliable results that connect with the application of sample treatment procedures for detecting unaltered nanoparticles in food products. The presented research introduces an economical, swift, user-friendly, environmentally responsible, and harmonious extraction method for the concurrent analysis of TiO2 and SiO2 particles in confectionery samples. Furthermore, particles from additives not included in the labeling have been detected, characterized, and quantified in the confectionary products.

Establishment of a system to analyze effects of airborne ultra-fine particulate matter from brake wear on plants under realistic exposure conditions.

Research on airborne ultrafine particles (UFP) is driven by an increasing awareness of their potential effects on human health and on ecosystems. Brake wear is an important UFP source releasing largely metallic and potentially hazardous emissions. UFP uptake into plant tissues could mediate entry into food webs. Still, the effects of these particles on plants have barely been studied, especially in a realistic setting with aerial exposure. In this study, we established a system designed to mimic airborne exposure to ultrafine brake dust particles and performed experiments with the model species Arabidopsis thaliana. Using advanced analytical methods, we characterized the conditions in our exposure experiments. A comparison with data we obtained on UFP release at different outdoor stations showed that our controlled exposures are within the same order of magnitude regarding UFP deposition on plants at a traffic-heavy site. In order to assess the physiological implications of exposure to brake derived-particles we generated transcriptomic data with RNA sequencing. The UFP treatment led to diverse changes in gene expression, including the deregulation of genes involved in Fe and Cu homeostasis. This suggests a major contribution of metallic UFPs to the elicitation of physiological responses by brake wear derived emissions.

Photosynthesis governed by nanoparticulate titanium dioxide. The Pisum sativum L. case study.

Wide availability of anthropogenic TiO2 nanoparticles facilitates their penetration into environment and prompts interactions with plants. They alter plants growth and change their nutritional status. In particular, metabolic processes are affected. In this work the effect of nanometric TiO2 on photosynthesis efficiency in green pea (Pisum sativum L.) was studied. Hydroponic cultivations with three Ti levels (10; 50 and 100 mg L-1) were applied. At all concentrations nanoparticles penetrated into plant tissues and were detected by the single particle ICP-MS/MS method. Nanoparticles altered the CO2 assimilation rate and gas exchange parameters (i.e. transpiration, stomatal conductance, sub-stomatal CO2 concentration). The most pronounced effects were observed for Ti 50 mg L-1 cultivation where photosynthesis efficiency, transpiration and stomatal conductance were increased by 14.69%, 4.58% and 8.92%, respectively. They were further confirmed by high maximum ribulose 1,5-bisphosphate carboxylation rate (27.40% increase), maximum electron transport rate (21.51% increase) and the lowest CO2 compensation point (45.19% decrease). Furthermore, concentrations of Cu, Mn, Zn, Fe, Mg, Ca, K and P were examined with the most pronounced changes observed for elements directly involved in photosynthesis (Cu, Zn, Mn, and Fe). The Cu concentrations in roots, stems and leaves for Ti 50 mg L-1 cultivation were below the control by 33.15%, 38.28% and 10.76%, respectively. The Zn content in analogous treatment and organs decreased by 30.24%, 26.69% and 13.35%. The Mn and Fe levels in leaves were increased by 72.22% and 50.32%, respectively. Our results indicated that plant defence mechanisms which restrain the water uptake have been overcome in pea by photocatalytic activity of nanoparticulate TiO2 which stimulated photosynthesis. On the contrary to the substantial stomatal conductance, the transpiration has been reduced because exceptional part of water flow was already consumed in chloroplasts and could not have been freed to the atmosphere.

Characterization of nanoparticles in silicon dioxide food additive.

Silicon dioxide (SiO2), in its amorphous form, is an approved direct food additive in the United States and has been used as an anticaking agent in powdered food products and as a stabilizer in the production of beer. While SiO2 has been used in food for many years, there is limited information regarding its particle size and size distribution. In recent years, the use of SiO2 food additive has raised attention because of the possible presence of nanoparticles. Characterization of SiO2 food additive and understanding their physicochemical properties utilizing modern analytical tools are important in the safety evaluation of this additive. Herein, we present analytical techniques to characterize some SiO2 food additives, which were obtained directly from manufacturers and distributors. Characterization of these additives was performed using dynamic light scattering (DLS), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), and single-particle inductively coupled plasma mass spectrometry (spICP-MS) after the food additive materials underwent different experimental conditions. The data obtained from DLS, spICP-MS, and electron microscopy confirmed the presence of nanosized (1-100 nm) primary particles, as well as aggregates and agglomerates of aggregates with sizes greater than 100 nm. SEM images demonstrated that most of the SiO2 food additives procured from different distributors showed similar morphology. The results provide a foundation for evaluating the nanomaterial content of regulated food additives and will help the FDA address current knowledge gaps in analyzing nanosized particles in commercial food additives.

Nanomaterial Characterization in Complex Media-Guidance and Application.

A broad range of inorganic nanoparticles (NPs) and their dissolved ions possess a possible toxicological risk for human health and the environment. Reliable and robust measurements of dissolution effects may be influenced by the sample matrix, which challenges the analytical method of choice. In this study, CuO NPs were investigated in several dissolution experiments. Two analytical techniques (dynamic light scattering (DLS) and inductively-coupled plasma mass spectrometry (ICP-MS)) were used to characterize NPs (size distribution curves) time-dependently in different complex matrices (e.g., artificial lung lining fluids and cell culture media). The advantages and challenges of each analytical approach are evaluated and discussed. Additionally, a direct-injection single particle (DI sp)ICP-MS technique for assessing the size distribution curve of the dissolved particles was developed and evaluated. The DI technique provides a sensitive response even at low concentrations without any dilution of the complex sample matrix. These experiments were further enhanced with an automated data evaluation procedure to objectively distinguish between ionic and NP events. With this approach, a fast and reproducible determination of inorganic NPs and ionic backgrounds can be achieved. This study can serve as guidance when choosing the optimal analytical method for NP characterization and for the determination of the origin of an adverse effect in NP toxicity.

Effect of TiO2 Nanoparticle on Bioaccumulation of ndl-PCBs in Mediterranean Mussels (Mitilus galloprovincialis).

The interaction of nanomaterials with pollutants in the marine environment might alter bioavailability, as well as toxicity, of both nanomaterials and pollutants, representing a risk, not only for marine organisms, but also for consumers through the marine food chain.The aim of this study was to evaluate the effect of titanium dioxide nanoparticles (TiO2NPs) in terms of bioaccumulation and toxicity on Mediterranean mussels (Mytilus galloprovincialis) exposed to six-indicator non-dioxin-like polychlorinated biphenyls (ndl-PCBs). Mussels were exposed to ndl-PCBs (20 µg/mL) (groups 3-4) or to a combination of ndl-PCBs (20 µg/mL) and TiO2NPs (100 µg/mL) (groups 5-6) for four consecutive days. TiO2NPs was detected in groups 5-6 (3247 ± 567 and 1620 ± 223 µg/kg respectively), but their presence did not affect ndl-PCBs bioaccumulation in mussels. In fact, in groups 3-4, the concentration of ndl-PCBs (ranging from 3818.4 ± 166.0-10,176 ± 664.3 µg/kg and 2712.7 ± 36.1-9498.0 ± 794.1 µg/kg respectively) was not statistically different from that of groups 5-6 (3048.6 ± 24.0-14,635.9 ± 1029.3 and 5726.0 ± 571.0-9931.2 ± 700.3 µg/kg respectively). Histological analyses showed alterations to the structure of the gill tissue with respect to the control groups, with more severe and diffuse dilatation of the central hemolymphatic vessels of the gill lamellae in groups 5-6 (treated with TiO2NPs and ndl-PCBs concurrently) compared to groups 3-4 (ndl-PCBs only). Finally, in mussels submitted to a seven-day depuration process, most TiO2NPs were eliminated, and NPs had a synergistic effect on ndl-PCBs elimination; as a matter of fact, in groups 5-6, the percentage of concentration was statically inferior to the one observed in groups 3-4. In any case, consumers might be exposed to TiO2NPs and ndl-PCBs (both concurrently and separately) if edible mussels, harvested in a contaminated environment, are consumed without a proper depuration process.

Simple and rapid formic acid sample treatment for the isolation of HgSe nanoparticles from animal tissues.

The present work explores for the first time the potential of formic acid on the extraction of tiemannite (HgSe) nanoparticles from seabird tissues, in particular giant petrels. Mercury (Hg) is considered one of the top ten chemicals of major public health concern. However, the fate and metabolic pathways of Hg in living organisms remain unknown. Methylmercury (MeHg), largely produced by microbial activity in the aquatic ecosystems is biomagnified in the trophic web. HgSe is considered the end-product of MeHg demethylation in biota and an increasing number of studies focuses on the characterization of this solid compound to understand its biomineralization. In this study, a conventional enzymatic treatment is compared with a simpler and environmentally friendly extraction by using formic acid (5 mL of = 50 % formic acid) as exclusive reagent. The analyses by spICP-MS of the resulting extracts from a variety of seabird biological tissues (liver, kidneys, brain, muscle) reveal comparable results by both extraction approaches in terms of nanoparticles stability and extraction efficiency. Therefore, the results included in this work demonstrate the good performance of employing organic acid as simple, cost effective and green procedure to extract HgSe nanoparticles from animal tissues. Moreover, an alternative consisting of a classical enzymatic procedure but with ultrasonic assistance reducing the extraction time from 12 h to 2 min is also described for the first time. The sample processing methodologies developed, combined with spICP-MS, have emerged as powerful tools for the rapid screening and quantification of HgSe nanoparticles in animal tissues. Finally, this combination allowed us to identify the possible occurrence of Cd particles and As particles associated with HgSe NPs in seabirds.

Size Analysis of Silver and Gold Nanoparticles Using Laser Ablation Single Particle ICP Mass Spectrometry: Evaluation of the Laser-Induced Disintegration of Nanoparticles.

Single particle inductively coupled plasma mass spectrometry combined with the laser ablation technique (LA-spICP-MS) has been used for the determination of particle size and the spatial distribution of metal nanoparticles (MNPs) in various solid samples such as biological samples and semiconductor materials. In this study, we investigated the effect of the fluence of the laser being used on the disintegration of MNPs. Commercially available MNPs of silver and gold (Ag NPs and Au NPs), the sizes of which were determined by transmission electron microscopy (TEM), were analyzed with LA-spICP-MS. We evaluated the degree of disintegration of the original-sized particles, based on a comparison of the size distributions obtained by LA-spICP-MS and other analytical techniques. The disintegration of both the Ag NPs and Au NPs was induced by a laser ablation process when the laser fluence was higher than 1.0 J cm-2, whereas no disintegration was observed when the fluence was lower than 1.0 J cm-2. Moreover, the mean diameter and standard deviation of the determined diameters obtained by LA-spICP-MS were in good agreement with solution-based spICP-MS and TEM analysis within analytical uncertainty. The data obtained here demonstrates that LA-spICP-MS represents a promising potential analytical technique for accurately determining the size of individual MNPs and their spatial distribution in solid samples.

Extraction and quantification of metal-containing nanoparticles in marine shellfish based on single particle inductively coupled plasma-mass spectrometry technique.

Quantitative characterization of nanoparticles (NPs) in marine shellfish is critical to understanding the risks of bio-accumulation. Based on single particle (sp)ICP-MS and electron microscopy, a standardized protocol was developed to extract Ag, Au, and indigenous Ti-containing NPs from mussels. The optimal parameters are: dry sample extraction with tetramethylammonium hydroxide (TMAH), 5% (v/v) final concentration of TMAH, extraction at 25 â„ƒ for 12 h, and separation by centrifugation (3000 rpm for 5 min). The particle number recoveries of spiked Ag and Au NPs were 88 ± 0.9% and 95 ± 1.1%, respectively, while Ti-containing NPs had a particle number concentration of 8.2 × 106 particles/mg and an average size of 70 nm in tested mussels. Furthermore, titanium oxide NPs, including rutile, anatase, and Magnéli phases (TixO2x-1) were found ubiquitously in 10 shellfish based on the optimal method. The particle number concentrations and average sizes of the Ti-containing NPs were 2.1 × 106-8.4 × 106 particles/mg and 70-80 nm, respectively. These Ti-containing NPs, such as TiO2, accounted for about half of the Ti mass in shellfish, indicating that marine shellfish may be a significant sink for Ti-containing NPs.