Selective Uptake Into Inflamed Human Intestinal Tissue and Immune Cell Targeting by Wormlike Polymer Micelles.

Inflammatory bowel disease (IBD) has become a globally prevalent chronic disease with no causal therapeutic options. Targeted drug delivery systems with selectivity for inflamed areas in the gastrointestinal tract promise to reduce severe drug-related side effects. By creating three distinct nanostructures (vesicles, spherical, and wormlike micelles) from the same amphiphilic block copolymer poly(butyl acrylate)-block-poly(ethylene oxide) (PBA-b-PEO), the effect of nanoparticle shape on human mucosal penetration is systematically identified. An Ussing chamber technique is established to perform the ex vivo experiments on human colonic biopsies, demonstrating that the shape of polymeric nanostructures represents a rarely addressed key to tissue selectivity required for efficient IBD treatment. Wormlike micelles specifically enter inflamed mucosa from patients with IBD, but no significant uptake is observed in healthy tissue. Spheres (≈25 nm) and vesicles (≈120 nm) enter either both normal and inflamed tissue types or do not penetrate any tissue. According to quantitative image analysis, the wormlike nanoparticles localize mainly within immune cells, facilitating specific targeting, which is crucial for further increasing the efficacy of IBD treatment. These findings therefore demonstrate the untapped potential of wormlike nanoparticles not only to selectively target the inflamed human mucosa, but also to target key pro-inflammatory cells.

Shape-Controlled First-Row Transition Metal Vanadates for Electrochemical and Photoelectrochemical Water Splitting.

Transition metal vanadates (MVs) possess abundant electroactive sites, short ion diffusion pathways, and optical properties that make them suitable for various electrochemical (EC) and photoelectrochemical (PEC) applications. While these materials are commonly used in energy storage devices like batteries and capacitors, their shape-controlled 1D and 2D morphologies have gained equal popularity in water splitting (WS) technology in recent times. This review focuses on recent progress made on various first-row (3d, 4 s) transition metal vanadates (t-MVs) having controlled one-dimensional (fiber, wire, or rod) and two-dimensional (layered or sheet) morphologies with a specific emphasis on copper vanadates (CuV), cobalt vanadates (CoV), iron vanadates (FeV), and nickel vanadates (NiV). The review covers different aspects of shape-controlled 1D and 2D t-MVs including optoelectrical properties, wet chemistry synthesis, and electrochemical (EC-WS) and photoelectrochemical water splitting (PEC-WS) performance in terms of onset potential, overpotential, and long-term stability or high cyclic performance. The review concludes by providing some possible thoughts on how to promote the water-splitting attributes of shape-controlled t-MVs more effectively.

Polyhedral Vinyl Polymer Particles Synthesized Via Solvent-Free Radical Polymerization.

Liquid marbles (LMs) with a cubic shape are created by using various vinyl monomers as an inner liquid and polymer plates with mm size as a stabilizer. The relationship between the surface tension of the vinyl monomers and formability of the LMs is investigated. LMs can be fabricated using vinyl monomers with surface tensions of 42.7-40.3 mN m-1. The cubic polymer particles are successively synthesized via free-radical polymerizations by irradiation of the cubic LMs with UV light in a solvent-free manner. In addition, controlling the number of polymer plates per one LM, the shape of the plate or the coalescence of the LMs can lead to production of polymer particles with desired forms (e.g., Platonic and rectangular solids) that correspond to the shapes of the original LMs.

Maneuvering the Peroxidase-Like Activity of Palladium-Based Nanozymes by Alloying with Oxophilic Bismuth for Biosensing.

Engineering the catalytic performance of nanozymes is of vital importance for their broad applications in biological analysis, cancer treatment, and environmental management. Herein, a strategy to boost the peroxidase-like activity of Pd-based nanozymes with oxophilic metallic bismuth (Bi) is demonstrated, which is based on the incorporation of oxophilic Bi in the Pd-based alloy nanocrystals (NCs). To synthesize PdBi alloy NCs, a seed-mediated method is employed with the assistance of underpotential deposition (UPD) of Bi on Pd. The strong interaction of Bi atoms with Pd surfaces favors the formation of alloy structures with controllable shapes and excellent monodispersity. More importantly, the PdBi NCs show excellent peroxidase-like activities compared with pristine Pd NCs. The structure-function correlations for the PdBi nanozymes are elucidated, and an indirect colorimetric method based on cascade reactions to determine alkaline phosphatase (ALP) is established. This method has good linear range, low detection limit, excellent selectivity, and anti-interference. Collectively, this work not only provides new insights for the design of high-efficiency nanozymes, expands the colorimetric sensing platform based on enzyme cascade reactions, but also represents a new example for UPD-directed synthesis of alloy NCs.

Shape Transformation via Etching and Regrowth: A Systematic Study of Pd Nanocrystals with Different Shapes and Twin Structures.

This article describes a systematic study of the oxidative etching and regrowth behaviors of Pd nanocrystals, including single-crystal cubes bounded by {100} facets, single-crystal octahedra and tetrahedra enclosed by {111} facets; and multiple-twinned icosahedra covered by {111} facets and twin boundaries. During etching, Pd atoms are preferentially oxidized and removed from the corners regardless of the type of nanocrystal, and the resultant Pd2+ ions are then reduced back to elemental Pd. For cubes and icosahedra, the newly formed Pd atoms are deposited on the {100} facets and twin boundaries, respectively, due to their relatively higher energies. For octahedra and tetrahedra, the Pd atoms self-nucleate in the solution phase, followed by their growth into small particles. We can control the regrowth rate relative to etching rate by varying the concentration of HCl in the reaction solution. As the concentration of HCl is increased, 18-nm Pd cubes are transformed into octahedra of 23, 18, and 13 nm, respectively, in edge length. Due to the absence of regrowth, however, Pd octahedra are transformed into truncated octahedra, cuboctahedra, and spheres with decreasing sizes whereas Pd tetrahedra evolve into truncated tetrahedra and spheres. In contrast, Pd icosahedra with twin boundaries on the surface are converted to asymmetric icosahedra, flower-like icosahedra, and spheres. This work not only advances the understanding of etching and growth behaviors of metal nanocrystals with various shapes and twin structures but also offers an alternative method for controlling their shape and size.

Water-Triggered Chemical Transformation of Perovskite Nanocrystals.

Recently emerged lead-halide perovskite nanocrystals (PNCs) are promising optoelectronic material due to their easy solution processability, wide range of color tunability, as well as very high photoluminescence quantum yield. Despite their significant success in lab-scale optoelectronic applications, the long-term stability becomes the main issue, hindering them towards commercialization. The highly ionic nature of such lead-halide structure makes them extremely unstable in water and air. But a very few groups have taken the advantage of such nature of the crystal structure for water-triggered chemical transformation towards shape, composition, and morphology controlled stable and bright PNCs, which are otherwise difficult to obtain by typical direct approach. Furthermore, using polymer as an encapsulating layer for the PNCs, water-soluble stable PNCs have been prepared. In this review, the recent progress on the water-hexane interface chemistry towards chemical transformation to produce several PNCs is described. Such method not only ensure to yield several shape-controlled perovskites nanocrystals, but also formation of perovskites in aqueous phase that show promising application towards bio-imaging.

Three-Dimensional Nickel Cobalt Phosphide Nanocrosses with Well-Defined Axial Arms for Efficient Oxygen Evolution Reaction.

Concave nanostructure with highly branched architecture and abundant step atoms is one kind of desirable materials for energy conversion devices. However, current synthetic strategies for non-noble metal-based NiCoP concave nanostructure still remain challenging. Herein, we demonstrate a site-selective chemical etching and subsequent phosphorating strategy to fabricate highly branched NiCoP concave nanocrosses (HB-NiCoP CNCs). The HB-NiCoP CNCs are consisted of six axial arms in three-dimensional space and each protruding arm is equipped with high-density atomic steps, ledges and kinks. As an electrocatalyst towards oxygen evolution reaction, the HB-NiCoP CNCs exhibit remarkably enhanced activity and stability, with small overpotential of 289 mV to reach 10 mA cm-2 , surpassing the NiCoP nanocages and commercial RuO2 . The superior OER performance of HB-NiCoP CNCs is originated from the highly branched concave structure, the synergistic effect between bimetal Ni and Co atoms, as well as the electronic structure modulation from P.

Shape Control of Carbon Nanoparticles via a Simple Anion-Directed Strategy for Precise Endoplasmic Reticulum-Targeted Imaging.

Herein, small-sized fluorescent carbon nanoparticles (CNs) with tunable shapes ranging from spheres to various rods with aspect ratios (ARs) of 1.00, 1.51, 1.89, and 2.85 are prepared using a simple anion-directed strategy for the first time. Based on comprehensive morphological and structural characteristics of CNs, along with theoretical calculations of density functional theory and molecular dynamics simulations, their shape-control mechanism is attributed to interionic interactions-induced self-assembly, followed by carbonization. The endoplasmic reticulum-targeting accuracy of CNs is gradually enhanced as their shape changes from spherical to higher-AR rods, accompanied by a Pearson's correlation coefficient up to 0.90. This work presents a facile approach to control the shape of CNs and reveals the relationship between the shape and organelle-targeting abilities of CNs, thereby providing a novel idea to synthesize CNs that serve as precise organelle-targeted fluorescent probes.

N,N-Dimethylformamide-Assisted Shape Evolution of Highly Uniform and Shape-Pure Colloidal Copper Nanocrystals.

In this paper, the N,N-dimethylformamide (DMF)-assisted shape evolution of highly uniform and shape-pure copper nanocrystals (Cu NCs) is presented for the first time. Colloidal Cu NCs are synthesized via the disproportionation reaction of copper (I) bromide in the presence of a non-polar solvent mixture. It is observed that the shape of Cu NCs is systematically controlled by the addition of different amounts of DMF to the reaction mixture in high-temperature reaction conditions while maintaining a high size uniformity and shape purity. With increasing amount of DMF in the reaction mixture, the morphology of the Cu NCs change from a cube enclosed by six {100} facets, to a sphere with mixed surface facets, and finally, to an octahedron enclosed by eight {111} facets. The origin of this shape evolution is understood via first-principles density functional theory calculations, which allows the study of the change in the relative surface stability according to surface-coordinating adsorbates. Further, the shape-dependent plasmonic properties are systematically investigated with highly uniform and ligand-exchanged colloidal Cu NCs dispersed in acetonitrile. Finally, the facet-dependent electrocatalytic activities of the shape-controlled Cu NCs are investigated to reveal the activities of the highly uniform and shape-pure Cu NCs in the methanol oxidation reaction.

Microtubules exert early, partial, and variable control of cotton fiber diameter.

MAIN CONCLUSION: Variable cotton fiber diameter is set early in anisotropic elongation by cell-type-specific processes involving the temporal and spatial regulation of microtubules in the apical region. Cotton fibers are single cells that originate from the seed epidermis of Gossypium species. Then, they undergo extreme anisotropic elongation and limited diametric expansion. The details of cellular morphogenesis determine the quality traits that affect fiber uses and value, such as length, strength, and diameter. Lower and more consistent diameter would increase the competitiveness of cotton fiber with synthetic fiber, but we do not know how this trait is controlled. The complexity of the question is indicated by the existence of fibers in two major width classes in the major commercial species: broad and narrow fibers exist in commonly grown G. hirsutum, whereas G. barbadense produces only narrow fiber. To further understand how fiber diameter is controlled, we used ovule cultures, morphology measurements, and microtubule immunofluorescence to observe the effects of microtubule antagonists on fiber morphology, including shape and diameter within 80 µm of the apex. The treatments were applied at either one or two days post-anthesis during different stages of fiber morphogenesis. The results showed that inhibiting the presence and/or dynamic activity of microtubules caused larger diameter tips to form, with greater effects often observed with earlier treatment. The presence and geometry of a microtubule-depleted-zone below the apex were transiently correlated with the apical diameter of the narrow tip types. Similarly, the microtubule antagonists had somewhat different effects between tip types. Overall, the results demonstrate cell-type-specific mechanisms regulating fiber expansion within 80 µm of the apex, with variation in the impact of microtubules between tip types and over developmental time.

Shape and deposition angle control of silver film-over-nanosphere SERS substrates.

Thin metallic films on dielectric nanospheres are demonstrated to have a high potential for the fabrication of cost-effective SERS substrates. In addition to the morphological advantages that nanospheres offer for attaining a high density of hot spots, possessing shape adjustability by uncomplicated thermal treatment makes them an attractive platform for tuneable SERS substrates. Furthermore, when combined with the oblique angle metal deposition technique, adjustable gaps at a high density and adjustable shape of metal films, such as Ag films, can be achieved on nanospheres. Applying small changes in deposition angle can provide means for fine adjustment of the Raman enhancement factor (EF), resulting in EF up to 108measured using crystal violet dye molecule as a Raman analyte. This practice paves the way for the fabrication of high EF SERS substrates at a reasonable cost using a monolayer of self-organized nanosphere patterns. An ultra-thin Ag film coated at 5° tilt is shown to be an excellent substitute for a film deposited at 0° with double the thickness. There is a strong agreement between the experimental results and finite-elements-method-based Maxwell simulations exhibiting expected field enhancements up to 109at a tilt angle of 5°.

Undercoordinated Active Sites on 4H Gold Nanostructures for CO2 Reduction.

Electroreduction of CO2 is a promising approach toward artificial carbon recycling. The rate and product selectivity of this reaction are highly sensitive to the surface structures of electrocatalysts. We report here 4H Au nanostructures as advanced electrocatalysts for highly active and selective reduction of CO2 to CO. Au nanoribbons in the pure 4H phase, Au nanorods in the hybrid 4H/fcc phase, and those in the fcc phase are comparatively studied for the electroreduction of CO2. Both the activity and selectivity for CO production were found to exhibit the trend 4H-nanoribbons > 4H/fcc-nanorods > fcc-nanorods, with the 4H-nanoribbons achieving >90% Faradaic efficiency toward CO. Electrochemical probing and cluster expansion simulations are combined to elucidate the surface structures of these nanocrystals. The combination of crystal phase and shape control gives rise to the preferential exposure of undercoordinated sites. Further density functional theory calculations confirm the high reactivity of such undercoordinated sites.

Recent Advances in Inorganic Nanomaterials Synthesis Using Sonochemistry: A Comprehensive Review on Iron Oxide, Gold and Iron Oxide Coated Gold Nanoparticles.

Sonochemistry uses ultrasound to improve or modify chemical reactions. Sonochemistry occurs when the ultrasound causes chemical effects on the reaction system, such as the formation of free radicals, that intensify the reaction. Many studies have investigated the synthesis of nanomaterials by the sonochemical method, but there is still very limited information on the detailed characterization of these physicochemical and morphological nanoparticles. In this comprehensive review, recent advances in the sonochemical synthesis of nanomaterials based on iron oxide nanoparticles (Fe3O4NP), gold nanoparticles (AuNP) and iron oxide-coated gold nanoparticles (Fe3O4@Au NP) are discussed. These materials are the most studied materials for various applications, such as medical and commercial uses. This review will: (1) address the simple processing and observations on the principles of sonochemistry as a starting point for understanding the fundamental mechanisms, (2) summarize and review the most relevant publications and (3) describe the typical shape of the products provided in sonochemistry. All in all, this review's main outcome will provide a comprehensive overview of the available literature knowledge that promotes and encourages future sonochemical work.

Tubulin Double Helix: Lateral and Longitudinal Curvature Changes of Tubulin Protofilament.

By virtue of their native structures, tubulin dimers are protein building blocks that are naturally preprogrammed to assemble into microtubules (MTs), which are cytoskeletal polymers. Here, polycation-directed (i.e., electrostatically tunable) assembly of tubulins is demonstrated by conformational changes to the tubulin protofilament in longitudinal and lateral directions, creating tubulin double helices and various tubular architectures. Synchrotron small-angle X-ray scattering and transmission electron microscopy reveal a remarkable range of nanoscale assembly structures: single- and double-layered double-helix tubulin tubules. The phase transitions from MTs to the new assemblies are dependent on the size and concentration of polycations. Two characteristic scales that determine the number of observed phases are the size of polycation compared to the size of tubulin (≈4 nm) and to MT diameter (≈25 nm). This work suggests the feasibility of using polycations that have scissor- and glue-like properties to achieve "programmable breakdown" of protein nanotubes, tearing MTs into double-stranded tubulins and building up previously undiscovered nanostructures. Importantly, a new role of tubulins is defined as 2D shape-controllable building blocks for supramolecular architectures. These findings provide insight into the design of protein-based functional materials, for example, as metallization templates for nanoscale electronic devices, molecular screws, and drug delivery vehicles.

Autocatalytic surface reduction and its role in controlling seed-mediated growth of colloidal metal nanocrystals.

The growth of colloidal metal nanocrystals typically involves an autocatalytic process, in which the salt precursor adsorbs onto the surface of a growing nanocrystal, followed by chemical reduction to atoms for their incorporation into the nanocrystal. Despite its universal role in the synthesis of colloidal nanocrystals, it is still poorly understood and controlled in terms of kinetics. Through the use of well-defined nanocrystals as seeds, including those with different types of facets, sizes, and internal twin structure, here we quantitatively analyze the kinetics of autocatalytic surface reduction in an effort to control the evolution of nanocrystals into predictable shapes. Our kinetic measurements demonstrate that the activation energy barrier to autocatalytic surface reduction is highly dependent on both the type of facet and the presence of twin boundary, corresponding to distinctive growth patterns and products. Interestingly, the autocatalytic process is effective not only in eliminating homogeneous nucleation but also in activating and sustaining the growth of octahedral nanocrystals. This work represents a major step forward toward achieving a quantitative understanding and control of the autocatalytic process involved in the synthesis of colloidal metal nanocrystals.

Surface Capping Agents and Their Roles in Shape-Controlled Synthesis of Colloidal Metal Nanocrystals.

Surface capping agents have been extensively used to control the evolution of seeds into nanocrystals with diverse but well-controlled shapes. Here we offer a comprehensive review of these agents, with a focus on the mechanistic understanding of their roles in guiding the shape evolution of metal nanocrystals. We begin with a brief introduction to the early history of capping agents in electroplating and bulk crystal growth, followed by discussion of how they affect the thermodynamics and kinetics involved in a synthesis of metal nanocrystals. We then present representative examples to highlight the various capping agents, including their binding selectivity, molecular-level interaction with a metal surface, and impacts on the growth of metal nanocrystals. We also showcase progress in leveraging capping agents to generate nanocrystals with complex structures and/or enhance their catalytic properties. Finally, we discuss various strategies for the exchange or removal of capping agents, together with perspectives on future directions.

Discovery of and Insights into DNA "Codes" for Tunable Morphologies of Metal Nanoparticles.

The discovery and elucidation of genetic codes has profoundly changed not only biology but also many fields of science and engineering. The fundamental building blocks of life comprises of four simple deoxyribonucleotides and yet their combinations serve as the carrier of genetic information that encodes for proteins that can carry out many biological functions due to their unique functionalities. Inspired by nature, the functionalities of DNA molecules have been used as a capping ligand for controlling morphology of nanomaterials, and such a control is sequence dependent, which translates into distinct physical and chemical properties of resulting nanoparticles. Herein, an overview on the use of DNA as engineered codes for controlling the morphology of metal nanoparticles, such as gold, silver, and Pd-Au bimetallic nanoparticles is provided. Fundamental insights into rules governing DNA controlled growth mechanisms are also summarized, based on understanding of the affinity of the DNA nucleobases to various metals, the effect of combination of nucleobases, functional modification of DNA, the secondary structures of DNA, and the properties of the seed employed. The resulting physical and chemical properties of these DNA encoded nanomaterials are also reviewed, while perspectives into the future directions of DNA-mediated nanoparticle synthesis are provided.

Self-Assembly of Biocompatible FeSe Hollow Nanostructures and 2D CuFeSe Nanosheets with One- and Two-Photon Luminescence Properties.

Transition metal chalcogenides are investigated for catalyst, intermediary agency, and particular optical properties because of their distinguished electron-vacancy-transfer (EVT) process toward different applications. In this work, one convenient approach for making pure-phased FeSe nanocrystals (NCs) and doped CuFeSe nanosheets (NSs) through a wet chemistry method in mixed solvents is illustrated. The surface modification of each product is realized by using a peptide molecule glutathione (GSH), in which the thiol group (-SH) is ascribed to be the in situ reducer and bonding agency between the crystalline surface and surfactant in whole constructing processes. Due to the functional groups in biological GSH, highly aggregated NCs are rebuilt in the form of an FeSe hollow structure through amino and carboxyl cross-linking functions through a spontaneous assembly procedure. Owing to the coupling procedure of Cu and Fe in the growth process, it generates enhanced EVT. Additionally, it shows the emission spectra of λEM-PL = 436 nm (FeSe) and 452 nm (CuFeSe) while λEX-PL = 356 nm, it also conveys two-photon phenomenon while λEX-PL = 720 nm. Moreover, it also shows strong off-resonant luminescence due to two-photon absorption, which should be valuable for biological applications.

Constructing Highly Porous Thermoelectric Monoliths with High-Performance and Improved Portability from Solution-Synthesized Shape-Controlled Nanocrystals.

Thermoelectricity offers a viable and reliable solution to convert waste heat into electricity. To enhance the performance and portability of thermoelectric materials, the crystal grain and pore structure should be simultaneously manipulated to achieve high electrical conductivity (σ), low thermal conductivity (κ), high figure of merit (zT), and low relative density. However, they cannot be synchronously realized using nanocrystals with uncontrolled domain size and shape as building blocks. Here, we employ solution-synthesized PbS nanocrystals with large grain size, controllable shape and tunable spatial packing to realize the aforementioned structural tuning. The as-sintered highly porous and well crystalline monolith exhibits high σ, low κ, high zT (1.06 at 838 K) and low relative density (82%). The phonon transport is studied by density functional theory highlighting the crucial role of phonon-pore scattering in reducing κ to enhance zT. Our strategy may benefit thermoelectrics and shed light on other technical fields such as catalysis, gas sensing, photovoltaics, and so forth.

Paper Origami-Inspired Design and Actuation of DNA Nanomachines with Complex Motions.

Significant progress in DNA nanotechnology has accelerated the development of molecular machines with functions like macroscale machines. However, the mobility of DNA self-assembled nanorobots is still dramatically limited due to challenges with designing and controlling nanoscale systems with many degrees of freedom. Here, an origami-inspired method to design transformable DNA nanomachines is presented. This approach integrates stiff panels formed by bundles of double-stranded DNA connected with foldable creases formed by single-stranded DNA. To demonstrate the method, a DNA version of the paper origami mechanism called a waterbomb base (WBB) consisting of six panels connected by six joints is constructed. This nanoscale WBB can follow four distinct motion paths to transform between five distinct configurations including a flat square, two triangles, a rectangle, and a fully compacted trapezoidal shape. To achieve this, the sequence specificity of DNA base-pairing is leveraged for the selective actuation of joints and the ion-sensitivity of base-stacking interactions is employed for the flattening of joints. In addition, higher-order assembly of DNA WBBs into reconfigurable arrays is achieved. This work establishes a foundation for origami-inspired design for next generation synthetic molecular robots and reconfigurable nanomaterials enabling more complex and controllable motion.