Evaluation of the soft tissue facial profile in different skeletal malocclusions in relation to age.

BACKGROUND: The aim of the study was to assess the thickness of the soft tissue facial profile (STFP) in relation to the skeletal malocclusion, age and gender. METHODS: All patients, aged 7-35 years, who were seeking orthodontic treatment at the Department of Orthodontics, Medical University of Warsaw between 2019 and 22 were included in the study. All patients had lateral head radiographs taken before the treatment. The cephalometric analysis was performed including the STFP analysis. The patients were allocated to one of six groups based on age and skeletal relations (ANB angle). The minimum number of patients in each group was 60 with equal gender distribution. The STFP analysis included ten linear measurements. RESULTS: A total of 300 patients were included in the study and allocated to five groups. Group 6 (growing patients with skeletal Class III malocclusion) was not included in the study as it failed to achieve the assumed group size. There were significant differences in the thickness of the STFP in relation to the skeletal malocclusions. Adults with skeletal Class III malocclusion had significantly thicker subnasal soft tissues compared to patients with skeletal Class I and Class II malocclusions. The thickness of the lower lip in patients with Class II skeletal malocclusion was significantly bigger compared to the other groups. Children and adolescents with Class II malocclusions had thicker lower lip in comparison to the group with Class I malocclusion. The majority of the STFP measurements were significantly smaller in children and adolescents compared to adults. The thickness of the STFP in males was significantly bigger in all age groups compared to females. CONCLUSIONS: The thickness of facial soft tissues depends on the patient's age and gender. The degree of compensation of the skeletal malocclusion in the STFP may be a decisive factor during orthodontic treatment planning regarding a surgical approach or a camouflage treatment of skeletal defects.

Dissecting the Complexity of Skeletal-Malocclusion-Associated Phenotypes: Mouse for the Rescue.

Skeletal deformities and malocclusions being heterogeneous traits, affect populations worldwide, resulting in compromised esthetics and function and reduced quality of life. Skeletal Class III prevalence is the least common of all angle malocclusion classes, with a frequency of 7.2%, while Class II prevalence is approximately 27% on average, varying in different countries and between ethnic groups. Orthodontic malocclusions and skeletal deformities have multiple etiologies, often affected and underlined by environmental, genetic and social aspects. Here, we have conducted a comprehensive search throughout the published data until the time of writing this review for already reported quantitative trait loci (QTL) and genes associated with the development of skeletal deformation-associated phenotypes in different mouse models. Our search has found 72 significant QTL associated with the size of the mandible, the character, shape, centroid size and facial shape in mouse models. We propose that using the collaborative cross (CC), a highly diverse mouse reference genetic population, may offer a novel venue for identifying genetic factors as a cause for skeletal deformations, which may help to better understand Class III malocclusion-associated phenotype development in mice, which can be subsequently translated to humans. We suggest that by performing a genome-wide association study (GWAS), an epigenetics-wide association study (EWAS), RNAseq analysis, integrating GWAS and expression quantitative trait loci (eQTL), micro and small RNA, and long noncoding RNA analysis in tissues associated with skeletal deformation and Class III malocclusion characterization/phenotypes, including mandibular basic bone, gum, and jaw, in the CC mouse population, we expect to better identify genetic factors and better understand the development of this disease.

The application of a fully digital approach in the treatment of skeletal class III malocclusion: a preliminary study.

BACKGROUND: Skeletal malocclusion patients have facial malformations and occlusal dysfunctions that require orthodontic-orthognathic joint treatment, while the combination treatment takes time and requires close communication between surgeons and orthodontists. Thus, improving the efficiency and effectiveness of the combination treatment is necessary, and it is still a challenge. Now, digital technology provides us with an excellent alternative. Despite the widespread use of digital technology in orthognathic surgery simulation and clear aligner orthodontic therapy, it has not been fully integrated into the combined orthognathic and orthodontic treatment process, and the components remain independent. METHODS: A fully digital approach to seamlessly integrating various parts of the combined treatment through digital technology was investigated in this study in order to achieve an efficient transition. Five patients with skeletal Class III malocclusion were enrolled, and all made fully digital treatment plans at the beginning of actual implementation, which included the design of pre-surgical orthodontic, orthognathic surgery, and post-surgical orthodontic. Then, every aspect of the clinical operation was carried out in accordance with the fully digital routine. After the entire treatment process was completed, the skeleton and dentition discrepancy between virtual planning and the actual result was evaluated. RESULTS: All participants completed the fully digital treatment process, and no complication was observed. The linear deviation of the skeletal anatomy was less than 1 mm, and the angular deviation was less than 1 degree. Except in one case in the lower dentition, the deviation of the virtual dental design from the real alignment was less than 2 mm. Furthermore, with one exception of maxillary anterior-posterior dimension, the linear deviations of the skeleton were not statistically significant. Therefore, the simulation accuracy of the fully digital approach was clinically acceptable. CONCLUSIONS: The digital treatment approach is clinically feasible and has achieved satisfactory results. The discrepancy between virtual design of the entire digital process and actual post-treatment situation was acceptable in clinic. A fully digital approach was proved effective in the treatment of skeletal Class III malocclusion, with which the efficient transition of treatment procedures was realized.

Evaluation of cuspid cortical anchorage with different sagittal patterns using cone-beam computed tomography: a retrospective study.

BACKGROUND: No studies have focused on cortical anchorage resistance in cuspids, this study aimed to characterize the cortical anchorage according to sagittal skeletal classes using cone-beam computed tomography (CBCT). METHODS: CBCT images of 104 men and 104 women were divided into skeletal class I, II, and III malocclusion groups. Skeletal and dental evaluations were performed on the sagittal and axial cross-sections. One-way analysis of variance followed by least significant difference post-hoc tests was used for group differences. Multiple linear regression was performed to evaluate the relationship between influential factors and cuspid cortical anchorage. RESULTS: All cuspids were close to the labial bone cortex in different sagittal skeletal patterns and had different inclinations. There was a significant difference in the apical root position of cuspids in the alveolar bone; however, no significant difference in the middle or cervical portions of the root was found between different sagittal facial patterns. The middle of the cuspid root was embedded to the greatest extent in the labial bone cortex, with no significant difference between the sagittal patterns. For all sagittal patterns, 6.03 ± 4.41° (men) and 6.08 ± 4.45° (women) may be appropriate root control angles to keep maxillary cuspids' roots detached from the labial bone cortex. CONCLUSIONS: Comparison of skeletal class I, II, and III malocclusion patients showed that dental compensation alleviated sagittal skeletal discrepancies in the cuspid positions of all patients, regardless of the malocclusion class. Detailed treatment procedures and clear treatment boundaries of cuspids with different skeletal patterns can improve the treatment time, periodontal bone remodeling, and post-treatment long-term stability. Future studies on cuspids with different dentofacial patterns and considering cuspid morphology and periodontal condition may provide more evidence for clinical treatment.

Associations between the 3D position of the mental foramen with sagittal skeletal relationships (classes I, II, and III) and vertical facial growth patterns (normal, long, and short faces) in different ages and sexes: a retrospective cohort study of 360 CBCTs.

BACKGROUND: The 3D position of the mental foramen (MF) is of significant clinical value in dental implantology and mandibular surgeries or in local anesthesia. Despite its importance, it is not clearly known how the position of MF can alter in different individuals, since the literature on the associations between the MF position with vertical growth patterns is non-existent and those on links between the MF position and skeletal malocclusions are scarce. Therefore, we aimed to investigate these, for the first time, on cone-beam computed tomographies (CBCTs). METHODS: Archival CBCTs of 9 sub-groups (i.e., 3 skeletal Classes I, II, and III × 3 vertical growth patterns 'long face, short face, normal face') were collected by evaluating patients' SNA, SNB, ANB, facial angle, lower facial height, and FMA (n = 9 × 40 = 360). Included cases were older than 17 years and without any history of orthodontic/orthognathic treatments (243 women, 117 men, mean age: 22.28 ± 2.80 years). Perpendicular distances between the MF and 3 fixed bony structures (the mandibular symphysis [S/width], the mandibular ramus [R/length], and the mandibular lower cortex [C/height]) were measured on different sectional planes on both hemimandibles. Left- and right-side measurements were combined. Data were analyzed using the 3-way ANCOVA, Bonferroni, one-way ANOVA, Tamhane, Pearson, and t-test (α = 0.05). RESULTS: Width was the smallest in Class II and greatest in Class III cases (all P values < 0.000001, Bonferroni). It was the shortest in long faces and longest in short faces (all P values ≤ 0.00008). The inferior-superior height was larger in Class III than both Classes I and II (both P values ≤ 0.003); there was no significant difference between Classes I and II in terms of height (P = 0.684). Height was the largest in long faces and smallest in short faces (all P values < 0.000001). The anterior-posterior length was the largest in Class III and smallest in Class II (all P values < 0.000001). Length was larger in short-face people versus normal- or long-face individuals (P ≤ 0.00003); nevertheless, long and normal faces did not differ in terms of length (P = 0.448). Subjects' age was not correlated with their MF positions (P ≥ 0.579, Pearson coefficient). Sex dimorphism existed only for height (P = 0.009, t-test) but not for length or width. CONCLUSIONS: The MF position may considerably differ in various horizontal or vertical growth patterns and sexes. This should be noted in mandible surgeries.

Morphological and dimensional variations of the frontal air sinuses in a group of adolescent Caucasians and Chinese in different skeletal malocclusions: a cross-sectional cephalometric study.

OBJECTIVE: This study aimed to evaluate the morphological and dimensional variations of the frontal air sinuses in a group of adolescent Caucasians and Chinese with different skeletal malocclusions in both genders. MATERIALS AND METHODS: This retrospective study included 290 adolescent Caucasians and Chinese patients with 145 each. Each sample included 90 females and 55 males and was categorized based on ANB angle in reference to each population norms into 65 skeletal class I, 50 skeletal class II, and 30 skeletal class III malocclusions. All linear, angular, and surface area measurements of the frontal air sinuses were evaluated using lateral cephalometric radiographs and calculated using Winceph version 8 software. The frontal air sinus parameters were compared between genders and the two ethnic groups using an independent sample t-test. ANOVA with Tukey's post hoc tests were used to compare the frontal air sinus parameters between the three skeletal malocclusions. RESULT: The frontal air sinus width and surface area were found to be significantly greater in Caucasians when compared with Chinese patients. According to gender, the frontal air sinus length, width, and surface area, as well as the glabella convexity, were greater in males than females, while the frontal air sinus index (length/width) was significantly greater in females than males in both ethnic groups. In both ethnic groups, the frontal air sinus surface area was significantly greater in skeletal class III malocclusion when compared to skeletal class I and class II malocclusions in Caucasians (P = 0.0022) and Chinese (P = 0.0097). There was a weak-to-moderate correlation between the frontal air sinus parameters and the nasio, sella, and glabella positions (R = -0.56 to 0.62). CONCLUSION: The frontal air sinus dimensions and surface area varied greatly in between ethnic groups, genders, and malocclusion types. The frontal air sinus parameters were correlated with nasion, sella, and glabella positions. CLINICAL RELEVANCE: These findings could assist orthodontists, ENT specialist, and forensic medical investigators to focus on the size of frontal sinus during treatment planning, the relationship between the size of frontal air sinus and malocclusions, and age determination.

A comparison of maxillary sinus diameters in Chinese and Yemeni patients with skeletal malocclusion.

BACKGROUND: This study aimed to compare the maxillary sinus dimensions and surface area in accordance with skeletal malocclusion, gender and ethnicity factors in a sample of Chinese and Yemeni patients. METHODS: This cross-sectional study analysed 180 maxillary sinuses using 180 lateral cephalometric radiographs. The patients were subdivided into two ethnic groups: Chinese and Yemeni. Each ethnic group comprised 90 patients, and men and women were divided equally. Each ethnic group was classified into three skeletal classes using ANB and Wits appraisal (skeletal Classes I, II and III). Pearson's correlation coefficient was also used to assess the relationship between maxillary sinus dimensions and cephalometric parameters. RESULTS: Men had larger maxillary sinuses than women; skeletal Class II had a higher length and surface area increase than other skeletal classes, although skeletal Classes I and II were almost equal in height. Except for the maxillary sinus length, none of these findings were statistically significant. The maxillary sinuses in Chinese are larger than those in Yemenis (P = 0.000). These variables were positively correlated with SNA, SNB and Co-A. The maxillary sinus length and Co-Gn were positively correlated. The NA-APO and NA-FH angles were also correlated with the maxillary sinus surface area. However, the gonial and GoGn-Sn angles negatively affected the maxillary sinus dimension and surface area. CONCLUSIONS: Men had larger maxillary sinuses than women in both ethnic groups, and Chinese individuals had larger maxillary sinuses than Yemenis. Skeletal Class II malocclusion of both ethnicities had larger maxillary sinus dimensions. Furthermore, the maxillary sinus dimensions correlated with cephalometric parameters.

Nasalance Scores as a Function of Skeletal Malocclusion of English-Speaking Adults in the North Indian Population.

OBJECTIVE: The objective of this study is quantitative assessment of nasalance for skeletal Class I (normative values), Class II, and III malocclusion in the English language for the North Indian population and to compare the normative values with the nasalance scores obtained from individuals with skeletal Class II and III malocclusion and to evaluate the normative values as a function of gender. MATERIAL AND METHODS: The study was conducted on a total sample of 200 patients with 100, 50, and 50 in group 1 (control group, Skeletal Class I), group 2 (Skeletal Class II), and group 3 (Skeletal Class III), respectively. ANB angle (anteroposterior angle formed by point A, nasion, and point B) measured on lateral cephalogram was used to categorize the patients into 3 groups. The normative nasalance scores were compared for males and females in the control group. The nasalance scores of skeletal Class II and III subjects were compared to the combined normative scores of the control group. The NasalView was used for the objective assessment of nasalance. Oral syllables (/pa/and/pi/), nasal syllables (/ma/and/mi/), and 3 passages (Zoo passage, Rainbow passage, and Nasal sentences) were used to determine the nasalance scores. RESULTS: The intragroup comparison of nasalance scores in group 1 showed statistically significant differences for different stimuli. The gender-related comparison showed no statistically significant differences in nasalance scores. The intergroup comparison of nasalance scores for skeletal malocclusion showed no statistically significant differences for different stimuli except statistically significant lower nasalance values for nasal sentences in group 3 compared to the control group. CONCLUSION: The study concluded that the nasalance scores for nasal sentences in skeletal Class III malocclusion were significantly lower than in the control group and were not statistically significant between the 3 groups for all other stimuli.

A heuristic model for cephalometric diagnosis of sagittal dysplasia.

OBJECTIVE: To identify the best-suited cephalometric parameter for assessing the sagittal skeletal discrepancy in the Indian population. DESIGN: An in vitro, observational, single-blinded, retrospective study. SETTING: Department of Orthodontics and Dentofacial Orthopaedics. METHODS: A total of 94 lateral cephalograms were used in this study. The study involved one key person and two examiners. The key person collected the radiographs, coded, analysed and classified them into three groups (skeletal classes I, II and III). Subsequently, the coded radiographs were independently analysed by the two examiners. They classified the cases by matching a minimum of 6 out of 11 parameters. On completion of diagnosis by the examiners, the samples were decoded and matched with the original diagnosis given by the key person. The samples in which identification of a particular cephalometric parameter matched the original evaluation as given by the key person was regarded as correctly diagnosed. The number of correctly assessed cases was used to judge the diagnostic performance of all the parameters in all the cases. Cross-validation of the method was performed, and a diagnostic algorithm was developed for diagnosis. RESULTS: ß angle and Pi angle showed a positive predictive value of 1 in both skeletal class I and II cases. ANB angle, W angle and HBN angle showed a positive predictive value of 1 in skeletal class III cases. CONCLUSION: No single cephalometric parameter can independently be used to diagnose sagittal skeletal discrepancy in all cases. However, a conclusive diagnosis on the type of sagittal skeletal malocclusion can be made by using a simple and easy to use diagnostic algorithmic process having a combination of cephalometric parameters.

The Habsburg Jaw-re-examined.

"Habsburg Jaw" is a frequently used eponymous designation for patients with mandibular prognathism, hyperplasia, or overgrowth. The purpose of this study was to evaluate portraits of the Spanish Habsburgs to determine the relative contributions of maxillary deficiency and mandibular prognathism to overall facial appearance. Representative portraits of the Spanish Habsburgs were assessed by 4 investigators for the presence of 11 anatomic features of maxillary deficiency and 7 of mandibular prognathism. Each characteristic was given a binary score of 1 if present and 0 if absent. Thus, the maximum score would be 11 for maxillary deficiency and 7 for mandibular prognathism. A semi-quantitative scale was established to determine the likelihood of each diagnosis: Maxillary deficiency: 0-4.99 (unlikely), 5-7.99 (likely), 8-11 (very likely); mandibular prognathism: 0-2.99 (unlikely), 3-5.99 (likely), 6-7 (very likely). Six of 7 Habsburg rulers were considered either likely or very likely to have maxillary deficiency, whereas 3/7 were assessed as likely and 4 unlikely to have mandibular prognathism. The results of this study suggest that the primary deformity of the "Habsburg Jaw" is maxillary deficiency rather than absolute mandibular prognathism.

Digital versus Manual Tracing in Cephalometric Analysis: A Systematic Review and Meta-Analysis.

Background: Over the years, various researchers have attempted to compare digital cephalometry with the conventional manual approach. There is a need to comprehensively analyze the findings from the earlier studies and determine the potential advantages and limitations of each method. The present systematic review aimed to compare the accuracy of digital and manual tracing in cephalometric analysis for the identification of skeletal and dental landmarks. Methods: A systematic search was performed using the keywords "Digital" AND "Manual" AND "Cephalometry" to identify relevant studies published in the English language in the past decade. The electronic data resources consulted for the elaborate search included the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, CINAHL, EMBASE, PsycINFO, Scopus, ERIC, and ScienceDirect with controlled vocabulary and free text terms. Results: A total of n = 20 studies were identified that fulfilled the inclusion and exclusion criteria within the timeframe of 2013 to 2023. The data extracted from the included articles and corresponding meta-analyses are presented in the text. Conclusions: The findings of the present systematic review and meta-analysis revealed trends suggesting that digital tracing may offer reliable measurements for specific cephalometric parameters efficiently and accurately. Orthodontists must consider the potential benefits of digital cephalometry, including time-saving and user-friendliness.

Cranial Base Measurements in Skeletal Malocclusion among Orthodontic Patients.

BACKGROUND: Facial growth and development is necessary for proper orthodontic diagnosis and treatment planning. Growth of cranial base is linked to the overall growth of facial bones, especially the maxilla and mandible. Any change in the amount and direction of growth of the cranial base can have direct or indirect effects on the developing maxilla and mandible. Thus the aim of this study was to determine the linear and angular cranial base measurements in different skeletal malocclusion in Nepalese population. METHODS: Pretreatment lateral cephalograms of 225 patients aged between 17-30 years were collected. Linear measurements Sella-Nasion (S-N), Sella-Articulare (S-Ar), Articulare-Gonion (Ar-Go), Gonion-Gnathion (Go-Gn) and angular measurements Saddle angle (N-S-Ar), Articular angle (S-Ar-Go) and Gonial angle (Ar-Go-Gn) were measured. RESULTS: In angular measurements statistically significant differences were found in the saddle and gonial angles between class I, II, and III skeletal pattern. In linear measurements, anterior and posterior cranial base lengths were not significantly different among groups however, ramal height and mandibular body length were significantly different among groups with a P value < 0.05. CONCLUSIONS: Skeletal class III has a larger gonial angle, ramal height and mandibular length. Males have larger linear measurements and females have larger angular measurements.

Impact of class II and class III skeletal malocclusion on pharyngeal airway dimensions: A systematic literature review and meta-analysis.

Background: This study is a pioneer systematic review and meta-analysis aimed at comparing the influence of Class II and Class III skeletal malocclusions on pharyngeal airway dimensions. It stands as the inaugural comprehensive assessment to collate and analyze the disparate findings from previously published articles on this topic. The objective of this study was to identify published articles that compare the effects of class II and class III skeletal malocclusion on the pharyngeal airway dimensions. Methods: An all-inclusive search for existing published studies was done to identify peer-reviewed scholarly articles that compared the influence of class II and class III skeletal malocclusion on pharyngeal airway dimensions. The search was done via five electronic databases: Cochrane Library, EMBASE, Scopus, Web of Science, and PubMed. Screening of the articles was done and the eligible studies were critically assessed using the Joanna Briggs Institute (JBI) Critical Appraisal Checklist. Results: The initial search yielded 476 potential articles of which, nine were finally included in this study for a total of 866 patients. Three studies were of cross-sectional design and six were of retrospective study design. Following a critical analysis and review of the studies, class III skeletal malocclusion had significantly larger volume and area measurements compared to class II skeletal malocclusion. Conclusion: Research in the field of literature has established that variations in skeletal classifications have a discernible effect on the size of the pharyngeal airways. With the advancement of skeletal malocclusions to a class III, there is an observed increase in both the volume and cross-sectional area of the airways.

Assessing the Co-relation between Mandibular Flare and Thickness of Lingual Cortex in Relation to the Third Molars: A Retrospective Cross-sectional Study.

Aim: To assess the co-relation between mandibular flare and thickness of lingual cortex in relation to the third molars. Materials and Methods: Retrospectively obtained computed tomography (CT) data of 26 patients was used after classifying them into respective skeletal malocclusion groups (classes I, II, and III). Thickness of lingual cortex was measured at crestal, middle, and apical levels in mandibular third molar region. Two angular and two linear measurements were used to measure mandibular flare. Angular measurements included the angle between condylion (Co) and menton (Me), and between gonion (Go) and menton (Me). Linear measurements included bigonial and bicondylion widths. Results: The two angular measurements did not differ significantly among the three skeletal malocclusion groups. Contrastingly, bicondylion width differed significantly among the three groups. Class II group showed no significant correlation between mandibular flare and lingual cortical thickness. Class III group demonstrated a significant negative correlation of linear and angular measurements with cortical bone thickness. Bicondylion width was significantly more in Class III group than in other skeletal groups, which proved an increased mandibular flare in patients with Class III malocclusion. Conclusion: Increase in mandibular flare was associated with decreased thickness of lingual cortical bone.

Assessment of Frontal Sinus Volume and Cranial Base Length Based on Different Vertical Skeletal Patterns: A Cone Beam Computed Tomographic Study.

Introduction Evaluating craniofacial growth is an essential component of orthodontic treatment, and it is assessed by examining the cranial base. The anterior cranial base is regarded as a stable structure, and the frontal sinus is also recognised as a contributing component in the formation of the cranial base. The frontal sinus, a cavity present in the frontal bone, displays variation in both size and shape and has an impact on the overall structure of the skull and face. This study aims to evaluate the impact of vertical skeletal pattern and gender on the volume of the frontal sinus. Materials and methodology In this study, 90 cone beam computed tomography (CBCT) scans from the record's section were included, comprising 46 males (55.44%) and 44 females (48.88%) aged 20 to 35 undergoing orthodontic treatment. The assessment involved evaluating vertical skeletal patterns using a lateral cephalogram derived from the CBCT scans, and volumetric analysis of the frontal sinus was conducted using Dolphin Imaging software (version 11.9; Dolphin Imaging and Management Solutions, Chatsworth, California). Statistical analysis was performed on the collected data using SPSS software, version 20.0 (IBM Corp., Armonk, NY). Pearson correlation, a one-way ANOVA test to determine any statistically significant differences between the means of both frontal sinus volume and cranial base length groups individually and an independent t-test to compare the sample means between the frontal sinus volume and cranial base length groups were performed. Results: A non-significant association was observed between frontal sinus volume and cranial base length in skeletal open bite (p = 0.73) and skeletal deep bite (p = 0.12) between males and females, which implies there is no substantial association between frontal sinus volume (p = 0.08) and cranial base length (p = 0.41) in the different vertical skeletal patterns.  Conclusion: Frontal sinus volume was similar in subjects with a skeletal open bite and a deep bite. Males and females did not show a difference in frontal sinus volume. Hence, it was concluded that frontal sinus volume and anterior cranial base cannot be used as parameters to predict vertical malocclusions.

Changes in mandibular width and frontal-lower facial profile after orthognathic surgery using sagittal split ramus osteotomy with removal of internal bone interference in patients with class III skeletal malocclusion.

BACKGROUND: The purpose of this study is to analyze changes in mandibular width and frontal view ramus inclination using cone beam CT in patients with skeletal class III malocclusion who underwent BSSRO, with the removal of bone interference between segments. METHODS: For all 20 subjects, cone-beam CT imaging was performed prior to surgery (T1), immediately post-surgery (T2), and 6 months after surgery (T3). Reorientation was performed using R2GATE software (MegaGen, Seoul, Korea). The gonion and antegonial notch were used as reference points in the sagittal view, and the most lateral point of the condyle head was used as the reference point in the frontal view. All measurements were recorded in the frontal view. RESULTS: Inter-gonial width decreased by 2.64 mm at T3-T2 (P < .001) and by 2.58 mm at T3-T1 (P < .05). Inter-antegonial width decreased by 1.75 mm at T3-T2 (P < .05) and by 3.5 mm at T3-T1 (P < .001). In the frontal view, the right ramus inclination based on the gonion increased by 2.07° at T3-T1 (P < .05). The left ramus inclination based on gonion increased by 2.45° at T2-T1 (P < .05) and by 3.94° at T3-T1 (P < .001). The right ramus inclination based on antegonial notch increased by 2.35° at T2-T1 (P < .05) and by 3.04° at T3-T1 (P < .01). The left ramus inclination based on antegonial notch increased by 2.73° at T2-T1 (P < .001) and by 3.18° at T3-T1 (P < .001). CONCLUSIONS: During bilateral sagittal split osteotomy, removing bone interference between the proximal and distal segments results in a reduction of postoperative mandibular width and an increase in frontal view ramus inclination.

Pharyngeal Airway Space Changes after Single Mandibular and Two-Jaw Surgery in Patients with Skeletal Class II Malocclusion.

Objective: To retrospectively evaluate the effects of single mandibular advancement (MA) and two-jaw surgery (2J-S) on the pharyngeal airway space (PAS) and hyoid position for the correction of skeletal Class II malocclusion. Methods: Eleven adult patients who underwent only MA surgery and twelve adult patients who underwent Le Fort I maxillary impaction-MA surgery (2-JS) were included in the retrospective study. A total of 46 cephalometric recordings obtained before (T1) and after treatment (T2) were examined. Craniofacial changes, area, and linear measurements of the pharyngeal airway and hyoid bone position were obtained in both groups. The Wilcoxon signed-rank test was used to evaluate time-dependent changes within groups. The Mann-Whitney U test was used to compare differences between groups. Results: Hyoid-Vert values increased significantly in both groups (MA, p<0.01; 2J-S, p<0.05); however, Hyoid-Hor values decreased significantly only in the 2J-S group (p<0.01). The anteroposterior dimensions of the airway increased in both groups, except for the PNS-P and PPS groups (p<0.01). Although a significant increase was observed in the nasopharyngeal area (A1) in the MA group (p<0.05), the decrease was found to be statistically significant in 2JG (p<0.01). Significant increases were found in the oropharyngeal (A2) and hypopharyngeal areas (A3) in both groups (p<0.01, p<0.05). Conclusion: Both surgical procedures for the correction of Class II malocclusion resulted in increased hypopharyngeal, oropharyngeal, and total airway measurements.

Evaluation of Incisor Position in a Sample of Orthodontic Patients.

BACKGROUND: To achieve a successful result, the orthodontist must use a systematic approach to plan the orthodontic treatment. Defining the correct position of the upper and lower incisors and evaluating their relationship with intermaxillary discrepancy and facial divergence have been recognized as the starting point for the diagnostic decision regarding extractions and anchorage requirements. The aim of our study was to analyze the relationship between intermaxillary discrepancy (ANPg^), mandibular inclination (SN^GoGn), lip incompetence, and the positioning of the upper and lower incisors (UIPs and LIPs) in a group of orthodontic patients. This retrospective study included 290 lateral cephalograms in 122 males (42.1%) and 168 females (57.9%) aged 8 to 53 years (median 14; interquartile range IQR 12-17). Data were analyzed by means of one-way Analysis of Variance (ANOVA) and linear regression analysis. RESULTS: This study showed a statistically significant increase in LIP values in patients with lip incompetence (p < 0.001). Moreover, the distribution of LIPs in groups with various SN^GoGn and ANPg^ angles was significantly different (p < 0.001). The regression analysis also showed a positive association between the LIP and SN^GoGn and between the LIP and ANPg^. CONCLUSION: The LIP presented a statistically significant difference in patients with and without lip incompetence, which varied significantly in subjects with different sagittal malocclusions and vertical face patterns.

Orthodontic management of a growing skeletal class II case with functional appliance and atypical extractions: A case report.

Extractions are commonly used to alleviate moderate to severe crowding, retract protrusive incisors, or correct anteroposterior inconsistencies in the maxillomandibular area. The choice of which teeth to be extracted requires a thorough assessment of the dentition of the patient, taking into account treatment objectives, dental and periodontal properties as well as ease of mechanics with minimum iatrogenic effects. This case report discusses the successful treatment with myofunctional appliance of a growing patient with skeletal Class II malocclusion followed by fixed mechanotherapy involving atypical teeth extraction.

Comparative evaluation of dermatoglyphic patterns between skeletal class I and skeletal class III malocclusion.

Background: Dermatoglyphics is the study of various dermal configurations on the fingers, palms, and soles. These appear during the 12th week of intrauterine life and develop completely by the 24th week. It is said that they remain constant thereafter. The aim of the present study was to compare and assess the association of dermatoglyphic patterns between skeletal class I and skeletal class III malocclusion. Methods: Finger and palm prints were collected using the ink and roller method from 604 subjects who were divided into skeletal class I, class III with maxillary retrognathism and class III with mandibular prognathism based on lateral cephalogram assessment. Results: Loop pattern was more predominant in skeletal class I malocclusion subjects and whorl pattern was more frequent in the other two groups. Total finger ridge count and atd angle also showed significant difference between the study groups. Conclusions: The present study attempted in assessing the association between dermatoglyphic patterns and skeletal malocclusion. Analysing dermal configurations may aid in indicating the type of developing malocclusion and thus help in interceptive and preventive orthodontics.