Functional occlusal patterns during lateral excursions in young adults.

STATEMENT OF PROBLEM: A valid system for assessing and classifying functional occlusion has not been established. The prevalence of anterior protected articulation is not known. PURPOSE: The purpose of this study was to quantify the prevalence of various functional occlusal contact patterns, including anterior protected articulation, among dental students. MATERIAL AND METHODS: Occlusal contacts were examined during lateral excursions from the maximal intercuspal position to the canine-to-canine position in 100 young adults. A combination of 3 common clinical methods was used: a visual examination, articulating paper, and feedback from the participants. RESULTS: Data from 3 classification systems were analyzed: (1) Occlusal contacts on the working side only ­ canine protected articulation was present in 25% of laterotrusions; anterior protected articulation was present in 18.5% of laterotrusions. Group function was present in 56% of laterotrusions. Other schemes were present in 0.5% of laterotrusions. (2) Contacts on both the working and the nonworking side. (3) Contacts on the working and nonworking side during both right and left laterotrusion. Nonworking side contacts were present in 33% of the participants. Nonworking side interference was present in 1 participant. CONCLUSIONS: The prevalence of anterior protected articulation found in this study was high enough to allow anterior protected articulation to be considered one of the fundamental working side occlusal contact patterns. More studies will be necessary to confirm this finding.

A Profilometry-Based Dentifrice Abrasion Method for V8 Brushing Machines Part II: Comparison of RDA-PE and Radiotracer RDA Measures.

OBJECTIVE: The purpose of this study was to compare the abrasivity of commercial dentifrices by two techniques: the conventional gold standard radiotracer-based Radioactive Dentin Abrasivity (RDA) method; and a newly validated technique based on V8 brushing that included a profilometry-based evaluation of dentin wear. This profilometry-based method is referred to as RDA-Profilometry Equivalent, or RDA-PE. METHODS: A total of 36 dentifrices were sourced from four global dentifrice markets (Asia Pacific [including China], Europe, Latin America, and North America) and tested blindly using both the standard radiotracer (RDA) method and the new profilometry method (RDA-PE), taking care to follow specific details related to specimen preparation and treatment. RESULTS: Commercial dentifrices tested exhibited a wide range of abrasivity, with virtually all falling well under the industry accepted upper limit of 250; that is, 2.5 times the level of abrasion measured using an ISO 11609 abrasivity reference calcium pyrophosphate as the reference control. RDA and RDA-PE comparisons were linear across the entire range of abrasivity (r2 = 0.7102) and both measures exhibited similar reproducibility with replicate assessments. RDA-PE assessments were not just linearly correlated, but were also proportional to conventional RDA measures. CONCLUSION: The linearity and proportionality of the results of the current study support that both methods (RDA or RDA-PE) provide similar results and justify a rationale for making the upper abrasivity limit of 250 apply to both RDA and RDA-PE.

Validation of the Basic Erosive Wear Examination.

The Basic Erosive Wear Examination (BEWE) is a practical index for screening tooth wear, using a 4-point ordinal scale (0-3). The highest score is recorded in each sextant and a total score (or BEWE sextant cumulative) is calculated per subject. This study aims to investigate if the BEWE sextant cumulative score compares to one comprising a percentage score from all tooth surfaces and as a highest BEWE per subject. The aim is to assess the validity of this score. A total of 350 subjects were recruited from hospital and general practice in south-east England. Buccal, occlusal and lingual/palatal BEWE scores were collected and percentages calculated based on scores 1, 1 and above, 2 and above and 3. BEWE sextant cumulative scores and highest BEWE scores were also recorded per subject. Spearman's correlation coefficients (p values) assessed the relationship between BEWE sextant cumulative scores, BEWE percentages and BEWE highest score per subject. The BEWE sextant cumulative score correlates significantly to a BEWE score taken as a percentage score from all tooth surfaces (Spearman's r > 0.5, p < 0.001) and especially to BEWE surface scores of 1 and above and 2 and above (r > 0.8, p < 0.001) and as a highest surface score per subject (r > 0.8, p < 0.001). BEWE sextant score provides a representation of tooth wear on all tooth surfaces. This study validates a tooth wear index, which provides clinicians with risk indicators of a patient's level of tooth wear and may help to guide clinical management.

Long-term effects of tongue piercing--a case control study.

The aim of this study was to evaluate tooth and periodontal damage in subjects wearing a tongue piercing (TP) in comparison to matched control subjects without tongue piercing. Members of the German Federal Armed Forces who had TP (group TP) and a matched control group (group C) volunteered to take part in the study. The time in situ, localization and material of TP were documented. Dental examinations included DMF-T, oral hygiene, enamel fissures (EF), enamel cracks (EC) and recessions. Statistical analysis was determined by χ (2) test and the t test. Both groups had 46 male subjects (mean age 22.1 years). The piercings had been in situ for 3.8 ± 3.1 years. Subjects in the TP group had a total of 1,260 teeth. Twenty-nine subjects had 115 teeth (9.1%) with EF (67% lingual). In group C (1,243 teeth), 30 subjects had 60 teeth with EF (4.8%, 78% vestibular) (p < 0.01). Thirty-eight subjects belonging to group TP had EC in 186 teeth (15%). In group C, 26 subjects with 56 teeth (4.5%) were affected by EC (p < 0.001). Twenty-seven subjects in group TP had 97 teeth (7.7%) with recessions. Lingual surfaces of anterior teeth in the lower jaw were affected most frequently (74%). In group C, 8 subjects had 19 teeth (1.5%) with recessions (65% vestibular). Differences between the two groups were statistically significant (p < 0.001). Tongue piercing is correlated with an increased occurrence of enamel fissures, enamel cracks and lingual recessions. Patients need better information on the potential complications associated with tongue piercing.

Occlusion factors influencing the magnitude of sleep bruxism activity.

The biomechanical load during strong bruxism activity reportedly causes many dental/oral problems. However, it is unknown whether the magnitude of muscle activity during sleep is controllable. In this study, the relationship between the magnitude of muscle activity during sleep and types of tooth contacts was examined, including anterior and posterior guidance, in order to clarify how occlusion factors contribute to sleep bruxism (SB). An EMG-2-axis accelerometer system was used for monitoring patterns and activities of SB. Bruxchecker was used to evaluate tooth contacts during SB, and a condylograph was used to measure posterior guidance (sagittal condylar inclination). Results show that grinding rather than clenching or tapping was observed in the high SB group, and there was Incisor-Canine-Premolar-Molar (ICPM) tooth contact during SB grinding movement. The canine occlusal guidance (COG) was flatter in the low SB group than in the moderate SB group. Relative canine occlusal guidance (rCOG), which is the difference between the sagittal condylar inclination (SCI) and COG, was larger in the low SB group than that in the high SB group. These findings suggest that the grinding pattern must be controlled to prevent strong bruxism, and that the muscle activity during bruxism can be reduced by controlling the tooth contact pattern during SB grinding.

[Tooth wear, a proposal for an evaluation system]. / Een beoordelingssysteem voor gebitsslijtage.

The present-day terminology and definitions of tooth wear are not unambiguous. For diagnosing tooth wear, however, it is essential that they are unambiguous. In this article a proposal is presented for a tooth wear evaluation system with simplified definitions. This system consists ofa number of modules and can be used for various aspects of the diagnostic procedure. It can be used for the quantification of tooth wear, both for periodic screening and for the monitoring of tooth wear in individual patients. The scoring of occlusal/incisal tooth wear as well as of non-occlusal/non-incisal tooth wear is possible. The evaluative system is also suitable for determining which type of tooth wear, such as attrition, abrasion and erosion, is most likely to have caused any observed loss of hard tooth tissue.

A new index of tooth wear. Reproducibility and application to a sample of 18- to 30-year-old university students.

A modified wear index, in which the wear of enamel and dentine are recorded separately, is described. The index was applied to estimating the prevalence and extent of tooth wear in a single convenience sample of 18- to 30-year-old students attending a university in London. The subjects were examined under good lighting in a dental chair away from a dental school. A total of 707 females and 303 males were recruited with a mean age of 21.9 years (standard deviation = 0.1, range = 18-30) and examined by 3 trained and calibrated examiners. Intra-examiner intra-class correlation coefficients showed a range of 0.44-0.88. The unweighted kappa scores were above 0.88 for enamel and dentine. The presence of enamel wear was common to all subjects, but 6.1% of the participants had more than one third of the tooth surface affected. Dentine was exposed on 5.3% of all surfaces, with the largest proportion accounting for less than 10% of the tooth surface (grade 1). The proportion of subjects with at least 1 surface with dentine exposed was 76.9% of the total population. The males had significantly more wear in dentine than the females (p = 0.001). The inter-examiner intra-class correlation coefficients for enamel and dentine were 0.87 and 0.92, respectively. The reproducibility of the index was comparable to other analyses and provides an opportunity to assess the prevalence of enamel wear in large population-based studies.

Free gingival grafts to increase keratinized tissue: a retrospective long-term evaluation (10 to 25 years) of outcomes.

BACKGROUND: Gingival augmentation procedures are indicated primarily to increase an insufficient amount of gingiva and sometimes to halt the progression of gingival recession. The aim of this retrospective long-term study was to evaluate changes in the amount of keratinized tissue (KT) and in the position of the gingival margin after free gingival graft procedures over a period of 10 to 25 years. METHODS: One hundred three subjects presenting with 224 sites completely lacking attached gingiva associated with gingival recessions were treated in a private practice. The experimental sites were treated with gingival augmentation procedures (free gingival grafts). The grafts were positioned at the presurgical level of the gingival margin or in a submarginal position. Clinical variables, including recession depth, amount of KT, and probing depth (PD), were measured at baseline (T(0)), 1 year after surgery (T(1)), and at the end of the follow-up period (10 to 25 years) (T(2)) and analyzed using descriptive statistics and multilevel models. RESULTS: From T(0) to T(1), the gingival margin shifted coronally 0.8 mm, and KT increased 4.2 mm. From T(1) to T(2), the gingival margin shifted coronally 0.6 mm, and the overall KT decreased 0.7 mm. PD remained stable. CONCLUSION: Gingival augmentation procedures performed in sites with an absence of attached gingiva associated with recessions provide an increased amount of KT associated with recession reduction over a long period of time.

Correlations of noncarious cervical lesions and occlusal factors determined by using pressure-detecting sheet.

OBJECTIVES: The purpose of this clinical study was to examine the relationships of v-shaped noncarious cervical lesion (NCCL) formation with occlusal factors. METHODS: A total of 159 male self-defense force officials with a mean age of 36.2 years participated in this study. All present teeth were examined for the presence and type of NCCL using the Tooth Wear Index (TWI). The subjects were then interviewed about bruxing and toothbrushing habit. Finally, occlusal force, occlusal contact area and average pressure were measured using a pressure-detecting sheet. Subject-level logistic regression was carried out to assess the associations of factors with presence of v-shaped NCCL teeth. Subjects without v-shaped NCCL were designated as control subjects. RESULTS: Totally, 4518 teeth were examined. Seventy-eight subjects (49.1%) had one or more teeth with typical v-shaped NCCL (259 teeth). The number of teeth with v-shaped NCCL of grade 2 (defect less than 1mm in depth) was 195 (4.3%), and the number of teeth with v-shaped NCCL of grade 3 (defect 1-2mm in depth) was 54 (1.2%). The prevalence of teeth with v-shaped NCCL was significantly higher in the maxilla than in the mandible. Most of the NCCL teeth were premolars. There was no significant difference between teeth with NCCL on the right side and those on the left side. Subject-level logistic regression analysis revealed that age (OR=1.11), toothbrushing pressure (400g, OR=2.43) and occlusal contact area (>23.0mm(2), OR=4.15) were associated with the presence of NCCL teeth. CONCLUSIONS: It is concluded that aging, toothbrushing pressure and occlusal contact area are associated with the presence of NCCLs.

Signs and symptoms of temporomandibular disorders in Nigerian adult patients with and without occlusal tooth wear.

OBJECTIVES: The purpose of this study was to investigate the prevalence of signs and symptoms of temporomandibular disorders in Nigerian patients with and without occlusal tooth wear, and to relate the signs and symptoms with the severity of occlusal tooth wear. METHODS: One hundred and fifty patients with occlusal tooth wear, and 100 control subjects participated in this study (mean age 40.8 +/- 12.2 years, range 18-65 years). Exclusion criteria included patients and subjects with more than one missing opposing pair of premolars or molars, restorations covering the entire incisal edge, canine cusps and occlusal surfaces of premolars and molars. The severity of occlusal wear was assessed using the tooth wear index (TWI) designed by Smith and Knight (1984). Chi-square test was used to compare the differences in signs and symptoms of TMD. P < 0.05 was defined as significant. RESULTS: Although more females reported pain than males the difference was not statistically significant (p = 0.05). Except for impaired range of movement, tooth wear patients and controls differ significantly with respect to the variables; pain report, pain on palpation, TMJ sound and deviation on opening (p < 0.001). Patients with mean occlusal TWI score of > or =3 differ significantly from those with TWI score < or =2 with respect to pain on palpation and TMJ sound (p < 0.001). CONCLUSIONS: Posterior occlusal wear (mean TWI scores of 3 or 4) was significantly associated with pain on palpation and TMJ sound. Hence there may be a clinically relevant risk of TMD among Nigerian patients with occlusal tooth wear.

[Tooth wear in Hindu betel nut chewers]. / Starcie zebów w wybranej populacji hinduskiej zujacej betel.

Literature data describe the impact of certain factors on oral health. Very well known is habitual chewing of different plant products, including tobacco, which depending on the geographical area and the substances used, have various names. It has been estimated that approximately 200 million residents of the West Pacific Rim and South-East Asia indulge in betel chewing. Betel is composed of a leaf of the betel pepper, lime, tobacco and the nut of the areca palm. This study aimed to assess the degree of abrasive changes in residents of the Korunalaya Leprosy Care Center. The examinations were carried out on 85 patients (45 females and 40 males), aged 35-95 years, at the local dental surgery. Patients had their teeth assessed and they were further interviewed as to the duration of their habit with regard to their sex and age (35-44; 45-64 and > or = 65 years). The abrasive changes were evaluated using Gerasimov's 7-degree scale. Interview data indicate that 71.76% of the patients were habitual betel chewers. Among female patients, third-degree abrasion was the most frequent change while among males--fifth degree (53.3% and 45.0%, respectively). The abrasive changes, increasing with age, can be attributed to the duration of betel chewing. It is worth noticing that a vegetarian diet can be a contributing factor to abrasion as most of the food consumed by Hindus are plants.

Assessing the tooth-restoration interface wear resistance of two cementation techniques: effect of a surface sealant.

This study compared (1) the tooth-restoration interface width of conventional and "resin coating" cementation techniques, (2) the toothbrushing wear resistance of the two interfaces and (3) this study evaluated the influence of a restoration surface sealing on toothbrush wear resistance on both cementation technique interfaces. Mid-coronal buccal surfaces of 40 bovine teeth were ground to obtain a flat enamel surface. For each specimen, a 3 mm x 4 mm x 3 mm dimension rectangular cavity was prepared. The teeth were divided into four groups. Two groups (RC) received a "resin coating" (ED Primer + Tetric Flow) prior to cementation. The remaining two groups (NC) served as non-coated groups. All teeth were restored with composite inlays (Z250) fabricated by the indirect method and were cemented with dual cure resin cement (Panavia F). After finishing the margins, one group from each of the cementation techniques (RC+S and NC+S) had the tooth-restoration interface protected with a restoration surface sealant (Biscover). The specimens were subjected to 100,000 brushing abrasion cycles. The tooth-restoration width was obtained using a Hommel Tester T 1000-basic profilometer and Turbo Datawin NT 1.34 Software (microm). The interface wear (vertical loss/microm and area/microm2) was calculated with Image Tool 3.0 Software. Data were analyzed with Student t-test, one-way analysis of variance and Tukey test (alpha=0.05). Mean interface width for the NC group was 67 microm and 72 microm for the RC group. The student t-test showed no significant differences between groups (p=0.53). ANOVA showed significant differences (p<0.01) in vertical loss among groups (NC: 49.30 microm; NC+S: 7.90 microm; RC: 27.15 microm; RC+S: 4.74 microm). Also, ANOVA showed significant differences (p<0.01) in worn areas among groups (NC: 2,008 microm2; NC+S: 128 microm2; RC: 1,580 microm2 and RC+S: 88 microm2). No differences were found in tooth-restoration interface width and worn area between conventional and "resin coating" techniques. "Resin coating" interface presented reduced vertical loss. Restoration surface sealing provided reduced wear in tooth-restoration interface for both techniques.

The measurement in vitro of enamel and dentine wear by toothpastes of different abrasivity.

OBJECTIVES: To investigate the in vitro enamel and dentine wear by toothpastes with a range of Relative Dentine Abrasivity (RDA) and Relative Enamel Abrasivity (REA) values. METHODS: Human enamel/dentine (approximately 50:50) blocks (approximately 4 x 4 mm) were polished and the enamel indented with four Knoop indents. The step across the enamel-dentine junction was measured by interference microscopy. Specimens were brushed in vitro with toothpastes with a range of RDA/REA values using a flat trim toothbrush mounted in a Wira brushing machine for 360 s and a load of 375 g. After brushing the Knoop indent length and the enamel-dentine step were remeasured and the amount of wear to the enamel and dentine was calculated. RESULTS: The mean enamel wear ranged from 0.05 to 0.40 microns, with the highest wear for the highest REA product. The mean dentine wear for all toothpaste products tested was positively correlated with RDA value (R2 = 0.897). The correlation was further improved if median wear values were used (R2 = 0.930). CONCLUSIONS: This study has demonstrated a rapid technique for the simultaneous investigation of the abrasive wear of toothpaste on enamel and dentine. There was a good correlation between median dentine wear and RDA values.

Abrasion of human enamel and dentine caused by toothpastes of differing abrasivity determined using an in situ wear model.

OBJECTIVES: To determine the rates of enamel and dentine wear in situ during tooth brushing with a range of five toothpastes of differing RDA and REA values. METHODS: Enamel/dentine inserts were placed in the buccal aspects of full upper dentures of human volunteers. Enamel wear was determined by change in Knoop indent length and dentine wear was determined from the enamel-dentine step height, measured using optical profilometry. RESULTS: Significant differences between the test products were found for both enamel and dentine (p < 0.05). However for the conventional toothpastes the rate of wear was similar and differences between the products were not generally statistically significant for either enamel or dentine, despite the fact that their RDA values differed by more than a factor of two. The rate of wear was found to decrease throughout the duration of the study. CONCLUSIONS: The study demonstrated that the methodology used is capable of assessing enamel and dentine wear in situ within a relatively short period of time. The data suggest that whilst in vitro tests have value in understanding differences in abrasivity between products, they cannot be used to predict in vivo effects.

The measurement of enamel and dentine abrasion by tooth whitening products using an in situ model.

OBJECTIVES: To determine the enamel and dentine wear of two whitening toothpastes using an in situ model with ex vivo brushing. METHODS: Human enamel/dentine (approximately 50:50) blocks (approximately 4 x 4mm) were placed in the upper buccal aspects of full or partial dentures of a group of 25 subjects. Subjects brushed the specimens ex vivo with either a calcium carbonate/perlite or silica containing whitening toothpaste under exaggerated conditions as compared to normal for 30 s, twice per day. Specimens were removed after 4, 8 and 12 weeks and the wear to the enamel and dentine was determined. Enamel wear was determined by change in Knoop indent length and dentine wear was determined from the enamel-dentine step height, measured using optical profilometry. RESULTS: The mean wear after 12 weeks was for enamel 0.27 and 0.19 microns, and for dentine 34.3 and 61.1 microns, for the calcium carbonate/perlite and silica toothpastes respectively. There were no significant differences between products after 12 weeks. The rate of wear was found to decrease throughout the duration of the study. CONCLUSION: There were no significant differences between the two whitening toothpastes in terms of enamel and dentine wear after 12 weeks brushing.

In vitro efficacy of a whitening toothpaste containing calcium carbonate and perlite.

OBJECTIVES: The studies described in this paper aimed to assess the stain removal efficacy, fluoride efficacy and abrasivity to enamel and dentine of a new whitening toothpaste containing calcium carbonate and perlite, using appropriate in vitro models. METHODS: Stain removal efficacy was assessed using the pellicle cleaning ratio (PCR) method. Fluoride efficacy was assessed using remineralisation, demineralisation and fluoride-uptake methods. Abrasivity was assessed using an enamel and dentine wear method. RESULTS: The results showed that the new whitening toothpaste was able to remove extrinsic tooth stain more effectively than three commercially available toothpaste formulations. The fluoride efficacy was superior to a non-fluoridated control and was not significantly different to a clinically tested fluoride-containing toothpaste. The abrasivity data showed that the calcium carbonate/perlite toothpaste is no more abrasive to enamel or dentine than two other commercially available whitening toothpastes. CONCLUSIONS: The studies show that the new whitening toothpaste is effective in extrinsic stain removal, has an efficacious fluoride source and does not have an undue degree of abrasivity to enamel or dentine compared to other relevant commercially available products.

Tooth wear in the elderly population in South East Local Government area in Ibadan, Nigeria.

It is the aim of this study to determine the pattern and degree of tooth wear in the elderly population in the South East Local Government Area in Ibadan. The study was carried out on 690 elderly individuals who were 65 years old and above, living in various wards in South East Local Government Area, in Ibadan. A multistage sampling technique was used to select elderly individuals for the study. Two interviewers, 2-record clerks and 2 examiners were trained for the study and the examiners were calibrated. The index of Eccles J.D was used to determine the severity of tooth wear. The results highlight the high prevalence of tooth wear, mainly attrition in the elderly in this local government area. Six hundred and forty (92.8%) of the elderly had tooth wear. Of these 58.59% were males and 41.41% females. Attrition was observed in 618 (89.6%) elderly individuals. The mandible exhibited a higher prevalence of tooth wear than the maxilla and was statistically significant. Severe tooth wear was observed in only 5.74% of the teeth whilst moderate and mild tooth wear were observed in 26.91% and 30.88% respectively. Unlike the Western European countries, attrition being the most common type of tooth wear in these elderly individuals suggests that the aetiological factors responsible for tooth wear are different. Common habits such as crushing of bones and chewing of sticks for routine oral hygiene care could be contributing factors to tooth wear in this environment.

Attrition, abrasion, corrosion and abfraction revisited: a new perspective on tooth surface lesions.

OVERVIEW: The authors propose updated and revised nomenclature, definitions and classification for tooth surface lesions. Their objective is standardization, clarity and clinical utility for the dental practitioner. The article presents a schema of the pathodynamic mechanisms in the formation of tooth surface lesions--three basic physical and chemical mechanisms, their interactions and their dental manifestations. CONCLUSIONS AND CLINICAL IMPLICATIONS: The use of precise definitions will assist the practitioner in determining the etiology of various tooth surface lesions. Understanding the pathodynamic mechanisms and their many possible interactions, as set forth in the schema, will enable the practitioner to make an accurate differential diagnosis and to provide effective prevention and treatment. It also will assist dentists in communicating more effectively with their colleagues as well as with their patients. In addition, the schema helps identify areas in which future research is indicated.