Use of Antimicrobial Silver Coatings on Fixed Orthodontic Appliances, Including Archwires, Brackets, and Microimplants: A Systematic Review.

Orthodontic treatments, while essential for achieving optimal oral health, present challenges in infection control due to the propensity for bacterial adhesion and biofilm formation on orthodontic appliances. Silver-coated orthodontic materials have emerged as a promising solution, leveraging the potent antimicrobial properties of silver nanoparticles (AgNPs). Antibacterial coatings are used in orthodontics to prevent the formation of bacterial biofilms. This systematic review evaluated the literature on antimicrobial silver coatings on fixed orthodontic appliances, including archwires, brackets, and microimplants. Two evaluators, working independently, rigorously conducted a comprehensive search of various databases, including PubMed, PubMed Central, Embase, Scopus and Web of Science. This systematic review comprehensively examined in vitro studies investigating the antimicrobial efficacy of silver-coated orthodontic archwires, brackets, and microimplants. The review registered in PROSPERO CRD42024509189 synthesized findings from 18 diverse studies, revealing consistent and significant reductions in bacterial adhesion, biofilm formation, and colony counts with the incorporation of AgNPs. Key studies demonstrated the effectiveness of silver-coated archwires and brackets against common oral bacteria, such as Streptococcus mutans and Staphylococcus aureus. Microimplants coated with AgNPs also exhibited notable antimicrobial activity against a range of microorganisms. The systematic review revealed potential mechanisms underlying these antimicrobial effects, highlighted implications for infection prevention in orthodontic practice, and suggested future research avenues. Despite some study heterogeneity and limitations, the collective evidence supports the potential of silver-coated orthodontic materials in mitigating bacterial complications, emphasizing their relevance in advancing infection control measures in orthodontics.

Heating of metallic orthodontic devices during anti-aging treatment with vacuum and electromagnetic fields: In vitro study.

BACKGROUND: The physical appearance of an individual plays a primary role as it influences the opinion of the viewer. For this reason, orthodontic therapy to improve perceived aesthetics is in high demand among patients. This factor, combined with the increase in the number of non-invasive facial aesthetic treatments, has led to the need to understand potential risk factors in the application of medical devices to the perioral skin in patients with fixed orthodontic appliances. The aim of this study was to evaluate in vitro heating of the orthodontic bracket following electromagnetic fields and negative pressure (V-EMF) used as an anti-aging treatment. METHODS: Two different types of titanium alloy wires, one made of "beta-Titanium" alloy and the other "Ni-Ti" (DW Lingual Systems GmbH-Bad Essen-Germany) were used. The orthodontic wires and brackets mounted on a resin mouth were covered with porcine muscle tissue, then subjected to anti-aging therapy with a Bi-one LifeTouchTherapy medical device (Expo Italia Srl-Florence-Italy) which generates a combination of vacuum and electromagnetic fields (V-EMF) already adopted for antiaging therapy. During administration of the therapy, the orthodontic brackets and porcine tissue were thermally monitored using a Wavetek Materman TMD90 thermal probe (Willtek Communications GmbH-Germany). In total 20 orthodontic mouths were used, 10 with Beta Titanium wires and 10 with Nickel Titanium wires. RESULTS: A temperature increase of about 1°C was recorded in each group. The outcome of the present research shows that the absolute temperatures measured on orthodontic appliances, which, despite having a slightly different curve, both show an increase in temperature of 1.1°C at the end of the session, thus falling well within the safety range of 2°C as specified by the standard CENELEC EN 45502-1. Therefore, V-EMF therapy can be considered safe for the entire dental system and for metal prostheses, which tend to heat up at most as much as biological tissue (+0.9°C/1.1°C vs. 1.1°C/1.1°C). CONCLUSION: In conclusion, anti-aging therapy with V-EMF causes a thermal increase on orthodontic brackets that is not harmful to pulp health.

Evaluation of effects of brackets and orthodontic wires on intraoral scans: A prospective in-vivo study.

OBJECTIVE: To evaluate any distortion produced by multibracket fixed orthodontic appliances on digital models obtained from intraoral scans (IOS), considering the presence of both brackets only and brackets/archwire combination. SETTING/SAMPLE: The IOS data of the arches of 20 patients (12 females and 8 males; mean age = 15.55 ± 2.84 years) were acquired using the CS3600 intraoral scanner (Carestream Dental, Atlanta, USA), without any appliances (model A), with vestibular brackets alone (model B) and then with brackets and orthodontic archwire fitted (model C). MATERIALS AND METHODS: Data were acquired between the months of January and October 2021 at the moment of indirect bonding phase. On each model, five intra-arch linear measurements were obtained (inter-canine, inter-premolar 1 and 2, inter-molar and arch depth), and after digital matching between model A and B (match 1) and A and C (match 2), the linear discrepancies were evaluated at 20 points (10 occlusal and 10 gingivolingual) previous identified on the reference model A. All measurements were performed using Geomagic Control X software (3D Systems, Morrisville, USA), and any dimensional variations and distortions were evaluated by the linear regression analysis and two-sample t-test (P ≤ .05). RESULTS: The results show an almost perfect correlation between both models B and C and the reference model A, both as regards the intra-arch linear measurements and the linear discrepancies found at the 20 identified points. CONCLUSIONS: Multibracket fixed orthodontic appliances do not produce any relevant distortions in digital models obtained via intraoral scanning. Therefore, the removal of archwire is not mandatory before IOS.

Self-reported pain during different phases of orthodontic treatment with fixed appliance: A multi-centre randomized controlled trial in adolescents with crowding.

OBJECTIVES: To compare self-reported pain levels across various treatment phases using passive self-ligating (Damon) and conventional (Victory) standardized fixed appliance systems. MATERIALS AND METHODS: Adolescents (12-17 years old) with crowding and displaced teeth, planned for non-extraction treatment, were recruited from four orthodontic clinics. They were randomized into stratified blocks (1:1 ratio) using concealed allocation to receive Damon Q™ (34 boys, 28 girls) or Victory™ (39 boys, 31 girls). Pain and analgesic intake were assessed on seven different occasions with validated self-report questionnaires using a 10-grade scale. RESULTS: Of the 132 patients included, six were lost to follow up. Clinically relevant mean pain scores (≥4) were registered in both groups after bonding upper and lower arches and after insertion of 0.019 × 0.025 stainless steel archwire. The highest mean scores were reported on day two after bonding the upper arch (Damon 5.96, Victory 7.18, P = .011). In both groups, at least 40% reported taking analgesics during various treatment phases. The Damon group reported a lower intake of analgesics on days one and two (P = .042 and .037) after treatment initiation. In the entire sample, boys reported significantly higher mean pain scores than girls on the second and third days after bonding (P = .008 and .026, respectively). CONCLUSIONS: Lower pain levels were reported from the Damon group after bonding. In general, boys reported higher pain than girls did. Clinicians and adolescents need to be aware that clinically relevant pain levels can be expected not only after bonding but also in later phases.

The effect of salbutamol sulphate inhalation (an anti-asthmatic medication) on the surfaces of orthodontic Archwires.

OBJECTIVES: This study aimed to compare the surface roughness and friction of different orthodontic archwires after exposure to salbutamol sulphate inhalation, an anti-asthmatic medication. METHODS: Orthodontic archwires (stainless-steel [StSt], nickel-titanium [NiTi], beta-titanium [ß-Ti], and copper-NiTi [Cu-NiTi]) were equally divided into two groups. The exposed groups were subjected to 20 mg salbutamol sulphate for 21 days and kept in artificial saliva. The control groups were only kept in artificial saliva. Surface changes were visualized using scanning electron microscopy (SEM). The average surface roughness (Ra) was evaluated using atomic force microscopy (AFM), and friction resistance forces were assessed using a universal testing machine. Statistical analyses were performed using t-tests and ANOVA followed by post hoc tests. RESULTS: Salbutamol sulphate did not change the surface roughness of StSt and NiTi archwires (p > .05). However, the change in the surfaces of ß-Ti and Cu-NiTi archwires was significant (p < .001). The frictional forces of exposed StSt, NiTi, and Cu-NiTi archwires did not change (p > .05). However, the frictional forces of ß-Ti archwires increased significantly after exposure to salbutamol sulphate (p = .021). Brushing with fluoride after exposure to salbutamol sulphate increased the frictional forces of ß-Ti only (p = .002). CONCLUSIONS: Salbutamol sulphate inhalation significantly affected the surface texture of ß-Ti and Cu-NiTi orthodontic archwires and increased the friction of ß-Ti archwires. These deteriorating effects were not detected on the surface of StSt and NiTi archwires. Therefore, we suggest that ß-Ti and copper titanium archwires should be used cautiously in individuals under salbutamol sulphate inhalation treatment.

Comparison of transverse dimensional and incisor changes between wide and narrow orthodontic archwires: a randomized controlled trial.

OBJECTIVES: To clinically compare the effects of broader archwires to standard archwires, using conventional brackets in both cases, on the transverse and incisor changes in maxillary and mandibular arches during leveling and alignment. MATERIALS AND METHODS: Fifty-two patients presenting with crowding were allocated into two groups; one group received the broad Damon archwires while the other received standard 3M OrthoForm III Ovoid archwires. All participants were treated with conventional brackets using similar archwire sequences (0.014, 0.018, 0.016 × 0.022/0.016 × 0.025, 0.019 × 0.025 NiTi/CuNiTi archwires). Digital casts were obtained from alginate impressions before treatment (T0) and six weeks after inserting 0.019 × 0.025 NiTi archwires (T1). Pretreatment (T0) and post-alignment (T1) lateral cephalograms were obtained for each patient. The primary outcomes were the changes in the transverse arch dimensions and incisor inclination. The secondary outcomes were the horizontal and vertical linear changes in incisor position. RESULTS: Complete data were collected for 47 patients. There was a significant increase in arch width during treatment within each group, except for upper inter-molar width in 3M group (P = 0.071). Damon wire induced a statistically significant increase in maxillary inter-second premolar width (P = 0.042), and mandibular inter-first premolar (P = 0.043), inter-second premolar (P = 0.008) and inter-molar widths (P = 0.033) compared to 3M group. The increase in incisor proclination and the linear change in incisor position were significant within each group, with less mandibular incisor proclination (P = 0.004) and horizontal advancement (P = 0.038) in the Damon group. CONCLUSIONS: Damon archwires created a comparatively greater increase in the maxillary inter-second premolar width and the mandibular inter-first premolar, inter-second premolar, and inter-molar widths, and less proclination and horizontal advancement in mandibular incisors. The study provides invaluable evidence that using broad archwires with self-ligating brackets is the reason behind any greater expansion observed in this system rather than the unique mechanical and biological features exerted by the self-ligating system. CLINICAL RELEVANCE: Our results suggest that Damon archwire might be a better alternative compared to the narrower standard archwires that are usually used with conventional brackets, especially in the mandibular arch, in cases where mild to moderate crowding is planned to be resolved with a non-extraction approach. However, as arch expansion in the absence of posterior crossbites raises the question of long-term stability, the reported advantage of the use of wide wires should be interpreted with caution and should be considered in the retention phase, bearing in mind that achieving a good post-treatment occlusion is important for enhancing post-treatment stability.

Effect of power arm length combined with additional anterior torque on the axial orientation of the maxillary incisors during en-masse retraction: A finite element analysis.

INTRODUCTION: This study aimed to clarify the effect of power arm length combined with additional torque incorporated into the archwire on the controlled movement of the anterior teeth using the finite element method. METHODS: An adult patient requiring medium anchorage after extraction of the maxillary first premolars was selected for this study. The power arms were placed between the lateral incisor and the canine at 3 levels: 3 mm, 6 mm, and 9 mm. A 150 g of retraction force was applied from each height of the anterior hook to the first molar tube, with 0°, 5°, and 10° of applied lingual root torque on the incisors. RESULTS: A 3-mm hook with 10° of applied torque, a 6-mm hook with 5° of applied torque, or a 9-mm hook with no extra torque constituted the best combinations targeted at controlling the inclination of incisors during retraction. Extrusion and distal tipping of the canine were observed. Moreover, mesial tipping and mesiopalatal rotation of the molar were unavoidable. Finally, intercanine and intermolar widths were decreased. CONCLUSIONS: Adding extra torque on the incisors or using high torque brackets is recommended for patients with maxillary first premolar extraction.

Biomechanical effect of dual-dimensional archwire on controlled movement of anterior teeth compared with rectangular archwire: A finite element study.

INTRODUCTION: This study aimed to determine and compare the effectiveness of the use of the dual-dimensional archwire and conventional rectangular archwire on tooth movement patterns when combined with various lengths of power arms. METHODS: Displacements of the maxillary central incisor and the deformation of the wire section were calculated when applying retraction forces from different lengths of power arms using the finite element method. RESULTS: Torque control of the incisor could be carried out more effectively when using the dual-dimensional archwire combined with long power arms than with the rectangular archwire. The use of the dual-dimensional archwire produced bodily movement of the central incisor at height levels of the power arm between 8 and 10 mm and lingual root tipping at the level of 10 mm. CONCLUSIONS: The use of the dual-dimensional archwire provided better-controlled movement of the incisor, including bodily movement or root movement, than the rectangular archwire.

Corrosion-induced changes in surface properties and roughness of orthodontic wires.

INTRODUCTION: This study aimed to investigate the surface free energy and surface roughness (SR) of metallic alloys under the influence of acid solutions. METHODS: The experiment involved the use of 270 rectangular wire samples measuring 0.019 × 0.025-in. These samples were sourced from 3 different commercial brands: Dentsply GAC, American Orthodontics, and Orthoclassic. This in vitro study categorized the samples into 3 groups based on the solutions employed: deionized water, citric acid, and phosphoric acid. Each group consisted of 90 samples, with 30 samples representing each type of alloy-stainless steel, nickel-titanium, and titanium molybdenum alloy (TMA). The wire segments were immersed in their respective solutions for 72 hours at a controlled temperature of 37°C, with continuous orbital agitation at 130 rpm. After the immersion period, the study analyzed both surface free energy and SR. The mean values obtained were subjected to an analysis of variance at a significance level of 5%. RESULTS: All alloys displayed hydrophobic behavior, as indicated by interaction free energy values <0. In acidic environments (phosphoric acid and citric acid), significant differences were observed among different brands and alloys, affecting surface energy and interaction free energy. Variations in SR among metallic alloys included steel with the lowest SR variations, followed by nickel-titanium and TMA. Notably, the TMA alloy stood out with significantly higher surface energy compared with that of the other alloys (P <0.001). CONCLUSIONS: In this study, all examined alloys demonstrated a hydrophobic nature, suggesting a limited attraction to water. Notably, TMA exhibited the least hydrophobic behavior among the alloys studied. However, when exposed to citric acid, TMA displayed the most substantial alterations in its surface properties. These results underscored the significance of accounting for the distinctive properties of each alloy and their responses to diverse challenges, such as exposure to acidic solutions, during the selection of orthodontic wires for orthodontics treatment.

A scanning electron microscopy investigation of the precision of three orthodontic bracket slot systems.

OBJECTIVE: One of the most imprortant factors in achieving ideal teeth positions is the precision of the slot dimensions of orthodontic brackets into the archwires are inserted.This study aimed to assess the accuracy of the dimensions of orthodontic bracket slots and molar buccal tube apertures and to compare them with the specifications provided by the manufacturers. METHOD: A total of sixty brackets and ten molar buccal tubes with varying slot heights were examined using a scanning electron microscope from the mesial side. The dimensions and morphology of these bracket slots and buccal tubes apertures were assessed using the AutoCAD Software. A one-sample t-test was conducted to compare the measurements with the values provided by the manufacturer. RESULTS: The findings of the present study indicated that the height of the measured bracket slots and buccal tube apertures dimensions were significantly larger than the actual dimensions and exhibiting divergent walls. On the other hand, the depth of the brackets slots showed significantly smaller values than the actual one. CONCLUSION: A need for careful consideration when selecting a commercially accessible brand for everyday use is essential as certain materials may not meet acceptable standards.

Effectiveness of a low-intensity static magnetic field in accelerating upper canine retraction: a randomized controlled clinical trial.

INTRODUCTION: Neodymium-iron-boron magnets have been suggested as a contemporary method for accelerating the process of orthodontic tooth movement (OTM). A limited number of clinical trials evaluated their effectiveness in accelerating OTM which is desirable for both orthodontists and patients. The present study aimed to investigate the effectiveness of a low-intensity static magnetic field (SMF) in accelerating upper canine retraction movement. MATERIALS AND METHODS: Seventeen patients (mean age 20.76 ± 2.9 years) with their orthodontic treatment decision to extract the upper and lower first premolars due to bimaxillary protrusion malocclusion were included in this split-mouth study. Canine retraction was performed using Nickel-titanium (Ni-Ti) closed-coil springs (150 g of force on each side). The experimental side received SMF via an auxiliary wire that carried 4-neodymium iron-born magnets with an air gap of 2 mm between the magnets to produce a magnetic field density of 414 mT in the region corresponding to the lateral ligament of the upper canine. To determine the rate of upper canine retraction and upper molar drift, alginate impressions were taken once a month to create plaster casts, which were analyzed digitally via a three-dimensional method. RESULTS: The rate of upper canine retraction was significantly greater (P < 0.05) on the SMF side than that on the control side during the first and second months, with an overall duration (19.16%) that was greater than that on the control side. The peak acceleration occurred during the second month (38.09%). No significant differences in upper molar drift were detected between the experimental and control sides (P > 0.05). CONCLUSION: A low-intensity static magnetic field was effective at accelerating upper canine retraction. The difference between the two sides was statistically significant but may not be clinically significant. The SMF did not affect upper molar drift during the upper canine retraction phase. TRIAL REGISTRATION: The trial was retrospectively registered at the ISRCTN registry ( ISRCTN59092624 ) (31/05/2022).

An investigation of the corrosion behavior of zinc-coated stainless steel orthodontic wires: the effect of physical vapor deposition method.

BACKGROUND: Releasing of metal ions might implicate in allergic reaction as a negative subsequent of the corrosion of Stainless Steel (SS304) orthodontic wires. The aim of this study was to evaluate the corrosion resistance of zinc-coated (Zn-coated) SS orthodontic wires. METHODS: Zinc coating was applied on SS wires by PVD method. Electrochemical impedance spectroscopy (EIS), Potentiodynamic polarization tests and Tafel analysis methods were used to predict the corrosion behavior of Zn-coated and uncoated SS wires in both neutral and acidic environments. RESULTS: The values of Ecorr ,icorr and Rct ,which were the electrochemical corrosion characteristics, reported better corrosion behavior of Zn-coated SS wires against uncoated ones in both artificial saliva and fluoride-containing environments. Experimental results of the Tafel plot analyses were consistent with that of electrochemical impedance spectroscopy analyses for both biological solutions. CONCLUSION: Applying Zn coating on bare SS orthodontic wire by PVD method might increase the corrosion resistance of the underlying stainless-steel substrate.

Clinical effect of chlorhexidine and sodium fluoride on corrosion behavior and surface topography of nitinol orthodontic archwires.

BACKGROUND: Alterations in the mechanical properties of the materials utilized in orthodontic appliances could affect the working properties of the appliances, thereby affecting clinical progress and outcome. Numerous studies have confirmed the correlation between alloy corrosion and raised surface roughness, which has a direct impact on the working characteristics of orthodontic archwires. METHODS: Thirty nickel-titanium (NiTi) orthodontic archwires were utilized in this study. Patients were randomly selected and allocated into three groups according to the randomization plan; (The control group): subjects practiced regular oral hygiene; (The fluoride group): subjects used fluoride for intensive prophylaxis; (The chlorhexidine group): subjects used chlorhexidine. Representative samples were evaluated by SEM, and then SEM images with high resolution were examined using Image J software to determine the surface roughness and obtain the results for further statistical analysis. RESULTS: Our findings indicated a significant difference was found between the three groups regarding the anterior and posterior parts between the control and the two other groups and a non-significant difference between NaF and CHX groups. Overall, the p-value for group comparisons was 0.000 for both parts, indicating a highly significant difference especially between the control and NaF groups. CONCLUSION: Mouthwashes containing sodium fluoride demonstrated more significant surface alterations than the control and CHX groups and should be prescribed in accordance with orthodontic materials to reduce side effects.

A review and evaluation of orthodontic brackets, molar bands and orthodontic auxiliaries during orthognathic surgery: A prospective cohort study.

OBJECTIVE: The primary aim of this study was to provide a review of the types and frequency of orthodontic brackets, molar bands and orthodontic auxiliaries used for patients undergoing orthognathic surgery. The secondary aim was to evaluate the risk of failure of these items during orthognathic surgery. METHODS: From three Dutch hospitals, 124 adult patients were included in this prospective cohort study. Five independent researchers collected the data during surgery using a specifically created data extraction form. The type of surgery, surgeon, orthodontist and type of orthodontic bracket, molar band or auxiliary were noted for each tooth. To evaluate their failure risk, the following variables were noted: failure and site; and type and cause of failure. RESULTS: Stainless-steel brackets were the most frequently (75.8%) used bracket type seen in patients undergoing orthognathic surgery. Ceramic brackets were seen in 24.2% of the cases and were only applied in the anterior region. Molar bands were present in 58.9% of the patients and mostly with bands on the first molars in combination with bonded tubes on the second molars. In 32.2% of all cases, one or more failures were noted. One-third of all failures were described as detachment of the molar tube on the most posterior molar. Kobayashi ligatures and powerpins showed the highest risk of failure (odds ratio [OR] 3.70, 95% confidence interval [CI] = 1.91-7.15). No significant difference in failure rate was found between stainless-steel brackets, molar bands (OR 0.34, 95% CI = 0.08-1.43) and ceramic brackets (OR 0.44, 95% CI = 0.14-1.45). CONCLUSION: Stainless-steel brackets, ceramic brackets, molar bands and surgical hooks are suitable for orthognathic cases. Kobayashi ligatures and powerpins had a significantly higher risk of failure so are not recommended for temporary intraoperative maxillomandibular fixation (TIO-MMF).

Correlating Frictional Forces Generated by Different Bracket Types during Sliding and Surface Topography Using Scanning Electron Microscopy and Optical Profilometer.

AIM: The study aims to correlate the frictional forces (FF) of four different types of commercially available ceramic brackets to their surface topography. MATERIALS AND METHODS: Two monocrystalline (MC) brackets (CLEAR™, Adanta, Germany; Inspire ICE™, Ormco, USA), one polycrystalline (PC) bracket (Symetri Clear™, Ormco, USA), one clear hybrid esthetic bracket (DISCREET™, Adanta, Germany), and a stainless-steel (SS) bracket (Victory™, 3M Unitek, USA) served as control. Both static friction (SF) and kinetic friction (KF) were recorded during sliding using an Instron universal machine in dry settings. The bracket slot surface topography was evaluated. A scanning electron microscope (SEM) and a profilometer machine were used for assessment before and after sliding. RESULTS: Frictional forces values during sliding were as follows in descending order; Inspire ICE™, CLEAR™, DISCREET™, Symetri Clear™, and, lastly, Victory™. Also, DISCREET™ scored the highest in surface roughness (Sa) values followed by Symetri Clear™. None of the correlations were statistically significant. CONCLUSION: Frictional forces produced during sliding were not always directly related to surface roughness. Monocrystalline ceramic brackets appeared to have the greatest FF and a low surface roughness. Furthermore, DISCREET™ scored a very low frictional value comparable to metal brackets yet showed the highest surface roughness. Metal brackets exhibited the greatest surface smoothness before sliding and the least SF. CLINICAL SIGNIFICANCE: Predicting the FFs produced during sliding mechanics would help the practitioner while choosing the bracket system to be used, and while planning the treatment mechanics, how much force to deliver, and how much tooth movement to expect. How to cite this article: AlBadr AH, Talic NF. Correlating Frictional Forces Generated by Different Bracket Types during Sliding and Surface Topography Using Scanning Electron Microscopy and Optical Profilometer. J Contemp Dent Pract 2024;25(1):41-51.

Biomechanical analysis of maxillary anterior teeth movements during different retracting methods with a lever arm miniscrew system in double-slot lingual brackets: A finite element method study.

OBJECTIVE: The objective of the study was to find the most effective retracting method for the six maxillary anterior teeth with double-slot lingual brackets using a lever arm and miniscrew system. METHODS: Six finite element models were constructed: (A) a ribbon-wise archwire with a lever arm; (B) a ribbon-wise archwire with a lever arm and a sectional edgewise archwire; (C) a ribbon-wise archwire and a sectional edgewise archwire with a lever arm; (D) an edgewise archwire with a lever arm; (E) an edgewise archwire with a lever arm and a sectional ribbon-wise archwire; and (F) an edgewise archwire and a sectional ribbon-wise archwire with a lever arm. Initial displacements of maxillary teeth driven by a 1.5 N retraction force to the lever arm were analysed. RESULTS: In models B, C, E and F, anterior torque loss and inter-canine distance increases were significantly lower than that of the models without auxiliary archwires. In models C and F, the main archwire was less likely deformed. In models A, B and C, the displacement of canines in sagittal and vertical directions were less than in models D, E and F. CONCLUSIONS: The combination of edgewise and ribbon-wise archwires in double-slot lingual brackets effectively preserves the anterior arch shape. An edgewise archwire with lever arms on the auxiliary sectional ribbon-wise archwire is recommended for better performance in anterior teeth retraction.

Force behaviour of elastic chains during a simulated gap closure in extraction therapy cases.

OBJECTIVE: Tooth movement with elastic chains requires defined force magnitudes. This study assessed the force behaviour of different elastic chains at different configurations of gap width. METHODS: Self-ligating brackets of teeth 5 & 6 and 2 & 3 were bonded to two movable aluminium plates. The plates were positioned on a joint basis with varying distances of 0.5, 2.0, 4.0, 6.0, and 8.0 mm. Reset forces of open and closed chains from four different manufacturers were investigated in four different configurations. Configurations differed in either having an additional intermediate ring within the gap (#1, #3) and/or having intermediate rings between teeth adjacent to the gap (#1, #2), or by no intermediate rings (#4). Forces were measured with a universal testing machine. The results were statistically analysed using U-test, H-test and (if applicable) post-hoc tests with a significance level of .05. RESULTS: Configurations #1 and #3, and #2 and #4 formed homogenous subgroups (P < .001). Initial forces in configuration #4 were significantly higher than in configuration #3 (P = .029). Initial forces in closed chains were significantly higher than for open chains (P = .029). CONCLUSIONS: Intermediate chain rings adjacent to the gap are not required to modulate the force. In contrast, leaving a ring unapplied in the tooth gap can help modulate the force. Open thermoset chains with an additional ring within the gap (#3) seem to produce suitable initial forces for a gap closure of 4 mm. With a residual gap width of <2 mm, open thermoset chains and closed thermoset chains (#4) seem suitable.

The in vitro biomechanics of anterior arch expansion using fixed lingual appliances with coil springs or archwire stops.

INTRODUCTION: The presented study investigates differences in the biomechanics of straight and mushroom fixed lingual appliances when implementing coil springs and stops for anterior arch expansion. MATERIALS AND METHODS: An in vitro orthodontic simulator was used to measure three-dimensional forces and moments on each tooth of a simulated maxillary arch. Mushroom and straight archwire forms of 0.016″ NiTi round archwire were considered, using 0.010″ × 0.030″ NiTi open coils and 0.016″-0.018″ archwire stops (n = 44 per group). Teeth in the anterior dental arch were moved from a neutral to crowded position to replicate anterior crowding of central and lateral incisors. Forces and moments of interest for lateral incisors and first premolars were compared using repeated measures mixed multivariate analysis of variance (α = 0.05). RESULTS: Three comparisons between straight versus mushroom archwires and two comparisons of coil springs vs. stops were not statistically significant. Overall, it was found that the use of a straight lingual archwire produced larger differences in forces and moments between using stops and coil springs than when using a mushroom archwire. Using stops produced larger forces and moments for both types of archwires as compared to using coil springs. The largest expansion forces were produced using straight archwires with stops, exceeding 3.0 N of force. Straight archwires with coil springs produced the lowest expansion forces on lateral incisors, just exceeding 1.5 N. CONCLUSIONS: The findings of this study have elucidated significant differences in the biomechanics of transverse arch expansion using straight or mushroom fixed lingual appliances with coil springs or stops.

Characterizing orthodontic tooth movement in real time using dental monitoring scans: A pilot study.

OBJECTIVES: This pilot study aimed to quantify the magnitude and type of tooth movement occurring in short time intervals within the regular monthly orthodontic visits for patients with fixed appliances and undergoing maxillary canine retraction. Additionally, this pilot study aimed to provide a descriptive evaluation for the accuracy and reliability of the Dental Monitoring (DM)-captured scans to those of an iTero digital scans in an extraction space closure model. SETTINGS AND SAMPLE POPULATION: 3D intraoral photographic scans (DM) for 12 patients with maxillary first premolar extractions in a single-centre academic institution. MATERIALS AND METHODS: Twelve patients treated with fixed appliances and undergoing space closure for maxillary premolar extraction(s) were included. Nickel-titanium (200 g) closing coil springs were used for canine retraction. At initiation of space closure (T1), iTero scans were acquired, and patients were instructed to take DM scans every 4-5 days until their next visit in 4-5 weeks (T2). At T2, a final iTero scan in addition to a DM scan was taken. The number of patients who did the scans regularly as instructed declined as time elapsed. Stereolithography (STL) files generated from the DM scans were superimposed with the STL files from the iTero scans using GOM Inspect software to determine the accuracy of the DM 3D models. To assess rate, type and direction of tooth movement, each of the 3D image STL files generated from the DM scans, taken every 4-5 days by each patient, was superimposed on the previously captured scan. The rate of tooth movement for the maxillary molars and canines was calculated in the 3 planes of space (X, Y, Z) at each time point, until the end of the experiment. RESULTS: Preliminary results indicated that the maxillary canines appeared to be displaced the greatest amount in the first 4-5 days with initial distolateral movement. As time elapsed, the rate of tooth movement decreased, and the tooth started moving distolingually. CONCLUSIONS: Dental monitoring software provides a high-tech platform to monitor tooth movement in a 'real-time' approach. Accuracy of the photographic scans in relationship to the intraoral scans appears promising. There seems to be some evidence that the greatest amount of movement occurs initially in the first few days after activation, dropping thereafter to become a slower constant rate of tooth movement.

Leveling the curve of Spee using different sized archwires: a randomized clinical trial of blood flow changes.

OBJECTIVES: To compare blood flow (BF) changes of teeth subjected to orthodontic forces during curve of Spee (COS) leveling using different archwires (AW). MATERIAL AND METHODS: Thirty subjects with COS > 5 mm were randomly assigned (1:1:1) into three groups based on the AW used: group 1: 0.017 × 0.025-inch stainless-steel (SS)AW, group 2: 0.019 × 0.025-inch SSAW, and group 3: 0.021 × 0.025-inch ß-titanium (TMA)AW. In the 3 groups, a 5 mm-depth reverse COS was placed in the AWs. A laser Doppler flowmeter was used to measure BF at different time intervals (T0-T4). RESULTS: In the 3 AWs group, BF of all measured teeth was reduced 20 min after force application. Afterwards, the BF values started to increase until the baseline values were almost restored within 1 week. Differences in BF changes between the extrusion and intrusion subgroups were observed within groups 1 and 3 during the first 20 min of force application (P < 0.05). Similar BF changes were recorded using the 3 different AWs. BF changes were associated with tooth type and the amount of COS depth change. CONCLUSIONS: During CoS leveling, similar BF changes were recorded using the 3 different AWs. Tooth type and the amount of COS depth change were associated with BF changes within the first 20 min of force application. Greater BF reduction was found in premolars compared to incisors during the first 20 min of AW placement. CLINICAL RELEVANCE: It is important to select a type of applied forces that minimally affect the BF. Intrusive forces appeared to have lower negative effects on the BF of teeth during COS leveling. TRIAL REGISTRATION: ClinicalTrial.gov (# NCT04549948).