Systematic engineering enables efficient biosynthesis of L-phenylalanine in E. coli from inexpensive aromatic precursors.

BACKGROUND: L-phenylalanine is an essential amino acid with various promising applications. The microbial pathway for L-phenylalanine synthesis from glucose in wild strains involves lengthy steps and stringent feedback regulation that limits the production yield. It is attractive to find other candidates, which could be used to establish a succinct and cost-effective pathway for L-phenylalanine production. Here, we developed an artificial bioconversion process to synthesize L-phenylalanine from inexpensive aromatic precursors (benzaldehyde or benzyl alcohol). In particular, this work opens the possibility of L-phenylalanine production from benzyl alcohol in a cofactor self-sufficient system without any addition of reductant. RESULTS: The engineered L-phenylalanine biosynthesis pathway comprises two modules: in the first module, aromatic precursors and glycine were converted into phenylpyruvate, the key precursor for L-phenylalanine. The highly active enzyme combination was natural threonine aldolase LtaEP.p and threonine dehydratase A8HB.t, which could produce phenylpyruvate in a titer of 4.3 g/L. Overexpression of gene ridA could further increase phenylpyruvate production by 16.3%, reaching up to 5 g/L. The second module catalyzed phenylpyruvate to L-phenylalanine, and the conversion rate of phenylpyruvate was up to 93% by co-expressing PheDH and FDHV120S. Then, the engineered E. coli containing these two modules could produce L-phenylalanine from benzaldehyde with a conversion rate of 69%. Finally, we expanded the aromatic precursors to produce L-phenylalanine from benzyl alcohol, and firstly constructed the cofactor self-sufficient biosynthetic pathway to synthesize L-phenylalanine without any additional reductant such as formate. CONCLUSION: Systematical bioconversion processes have been designed and constructed, which could provide a potential bio-based strategy for the production of high-value L-phenylalanine from low-cost starting materials aromatic precursors.

A pH-dependent shift of redox cofactor specificity in a benzyl alcohol dehydrogenase of aromatoleum aromaticum EbN1.

We characterise a reversible bacterial zinc-containing benzyl alcohol dehydrogenase (BaDH) accepting either NAD+ or NADP+ as a redox cofactor. Remarkably, its redox cofactor specificity is pH-dependent with the phosphorylated cofactors favored at lower and the dephospho-forms at higher pH. BaDH also shows different steady-state kinetic behavior with the two cofactor forms. From a structural model, the pH-dependent shift may affect the charge of a histidine in the 2'-phosphate-binding pocket of the redox cofactor binding site. The enzyme is phylogenetically affiliated to a new subbranch of the Zn-containing alcohol dehydrogenases, which share this conserved residue. BaDH appears to have some specificity for its substrate, but also turns over many substituted benzyl alcohol and benzaldehyde variants, as well as compounds containing a conjugated C=C double bond with the aldehyde carbonyl group. However, compounds with an sp3-hybridised C next to the alcohol/aldehyde group are not or only weakly turned over. The enzyme appears to contain a Zn in its catalytic site and a mixture of Zn and Fe in its structural metal-binding site. Moreover, we demonstrate the use of BaDH in an enzyme cascade reaction with an acid-reducing tungsten enzyme to reduce benzoate to benzyl alcohol. KEY POINTS: •Zn-containing BaDH has activity with either NAD + or NADP+ at different pH optima. •BaDH converts a broad range of substrates. •BaDH is used in a cascade reaction for the reduction of benzoate to benzyl alcohol.

An investigation of the acaricidal activity of benzyl alcohol on Rhipicephalus annulatus and Rhipicephalus sanguineus and its synergistic or antagonistic interaction with commonly used acaricides.

The most economically significant ectoparasites in the tropics and subtropics are ixodid ticks, especially Rhipicephalus annulatus and Rhipicephalus sanguineus. Years of extensive use of the readily available acaricides have resulted in widespread resistance development in these ticks, as well as negative environmental consequences. Benzyl alcohol (BA) has been frequently used to treat pediculosis and scabies, and it may be an effective alternative to commonly used acaricides. The main aim of the present study was to evaluate the acaricide activity of BA and its combination with the regularly used chemical acaricides against R. annulatus and R. sanguineus. Different concentrations of BA alone and in combination with deltamethrin, cypermethrin and chlorpyrifos were tested in vitro against adult and larvae of both tick species. The results showed that BA is toxic to R. annulatus and R. sanguineus larvae, with 100% larval mortality at concentrations of ≥50 mL/L, and LC50 and LC90 attained the concentrations of 19.8 and 33.8 mL/L for R. annulatus and 18.8 and 31.8 mL/L for R. sanguineus, respectively. Furthermore, BA in combination with deltamethrin, cypermethrin and chlorpyrifos exhibited synergistic factors of 2.48, 1.26 and 1.68 against R. annulatus larvae and 1.64, 11.1 and 1.14 against R. sanguineus larvae for deltamethrin + BA, cypermethrin + BA and chlorpyrifos + BA, respectively. BA induced 100% mortality in adult R. annulatus at concentrations of ≥250 mL/L with LC50 and LC90 reached the concentrations of 111 and 154 mL/L, respectively. Additionally, BA had ovicidal activity causing complete inhibition of larval hatching at 100 mL/L. The combination of BA with deltamethrin and cypermethrin increased acetylcholinesterase inhibition, whereas the combination of BA with chlorpyrifos decreased glutathione (GSH) activity and malondialdehyde levels. In the field application, the combination of BA 50 mL/L and deltamethrin (DBA) resulted in a significant reduction in the percentage of ticks by 30.9% 28 days post-treatment when compared with groups treated with deltamethrin alone. In conclusion, BA causes mortality in laboratory and field studies alone and in combination with cypermethrin or deltamethrin. BA can be used for control of ticks of different life stages, that is, eggs and larvae, through application to the ground.

Innovative UPLC technique for concurrent quantification of etofenamate and benzyl nicotinate in the presence of methylparaben and benzyl alcohol in their topical cream: Greens, white, and Six Sigma methodologies.

The efficacious treatment of muscle and joint pain relies heavily on etofenamate (ETO) and benzyl nicotinate (BN), which possess robust anti-inflammatory and pain-relieving properties when paired with methylparaben (MP) or benzyl alcohol (BA). In this study, we have established and validated innovative RP-UPLC methods for assessing ETO and BN in the presence of MP or BA in their dosage forms, employing eight green tools to evaluate their eco-friendliness and effectiveness. Reversed phase-ultra-performance liquid chromatography (RP-UPLC) technique employs a flow rate of 0.3 mL/min on Waters Acquity UPLC BEH Column (C18, 1.7 µm, 100 mm × 2.1 mm), detection at 254 nm using a photo diode array (PDA) detector and mobile phase of 0.05 M KH2PO4 buffer, acetonitrile, and methanol (50:15:35, v/v/v) adjusted pH 6.0 with 0.2% triethylamine. For ETO, BN, MP, and BA, the calibration curves were linear and ranged from 0.005 to 1.0, from 0.001 to 0.2, from 0.002 to 0.08, and from 0.0001 to 0.1 mg/mL, respectively. The correlation value was 0.9999, and the accuracy findings ranged from 98.81% to 100.56%. Consequently, the methodology has been successfully implemented in assay testing for the pharmaceuticals in the presence of the MP or BA, demonstrating the high selectivity of these approaches. The present study presents the Blue Applicability Grade Index (BAGI), an innovative approach that complements green metrics in practical white analytical chemistry. According to the International Council for Harmonisation (ICH) criteria, the procedures were effectively validated.

Enhanced Bioactivity of Enzyme/MOF Biocomposite via Host Framework Engineering.

This study reports the successful development of a sustainable synthesis protocol for a phase-pure metal azolate framework (MAF-6) and its application in enzyme immobilization. An esterase@MAF-6 biocomposite was synthesized, and its catalytic performance was compared with that of esterase@ZIF-8 and esterase@ZIF-90 in transesterification reactions. Esterase@MAF-6, with its large pore aperture, showed superior enzymatic performance compared to esterase@ZIF-8 and esterase@ZIF-90 in catalyzing transesterification reactions using both n-propanol and benzyl alcohol as reactants. The hydrophobic nature of the MAF-6 platform was shown to activate the immobilized esterase into its open-lid conformation, which exhibited a 1.5- and 4-times enzymatic activity as compared to free esterase in catalyzing transesterification reaction using n-propanol and benzyl alcohol, respectively. The present work offers insights into the potential of MAF-6 as a promising matrix for enzyme immobilization and highlights the need to explore MOF matrices with expanded pore apertures to broaden their practical applications in biocatalysis.

The Effect of Benzyl Alcohol on the Voltage-Current Characteristics of Tethered Lipid Bilayers.

In this study a lipid bilayer membrane model was used in which the bilayer is tethered to a solid substrate with molecular tethers. Voltage-current (V-I) measurements of the tethered bilayer membranes (tBLM) and tBLM with benzyl alcohol (BZA) incorporated in their structures, were measured using triangular voltage ramps of 0-500 mV. The temperature dependence of the conductance deduced from the V-I measurements are described. An evaluation of the activation energies for electrical conductance showed that BZA decreased the activation/ Born energies for ionic conduction of tethered lipid membranes. It is concluded that BZA increased the average pore radius of the tBLM.

DFT Mechanistic Investigation on Manganese Pincer Complex Catalysed Cross-Coupling of Methanol with Benzyl Alcohol to Afford Methyl Benzoate.

In this paper the density functional theory (DFT) method was employed to investigate the cross-coupling of methanol with benzyl alcohol to afford methyl benzoate, catalysed by Mn-PNN pincer complex. The whole reaction process mainly includes three stages: the dehydrogenation of benzyl alcohol to benzaldehyde, the coupling of benzaldehyde with methanol to hemiacetal and the dehydrogenation of hemiacetal to methyl benzoate. The calculated results indicated that two dehydrogenation processes are influenced by two competitive mechanisms of inner and outer spheres. Dehydrogenation of benzyl alcohol to benzaldehyde is the rate-determining step of the whole reaction, with the energy barrier of 22.1 kcal/mol. In addition, the regeneration of catalyst is also extremely important. Compared with direct dehydrogenation, the dehydrogenation mode assisted by formic acid is more advantageous. This work might provide theoretical insights and shed light on the design of cheap transition-metal catalysts for the dehydrogenation reaction.

Tailoring Galactose Oxidase for Self-Powered Benzyl Alcohol Sensing.

Benzyl alcohol (BnOH) is a widely-used preservative in a variety of cosmetics, but the excess addition (≥1.0 %) may cause strong symptoms such as nausea, gastrointestinal irritation, convulsion, even death, making it crucial to monitor and control the addition quantity. Herein, we have developed a test-strip-like BnOH detection method via tailoring a galactose oxidase (GOase) towards BnOH oxidation and preparing a self-powered electrochromic strip for BnOH concentration visualization. A double-substituted GOase variant (Y329S/R330F), on the basis of the reported GOase M1 , has been obtained by semi-rational design with a 24.6-fold improved activity towards BnOH compared to GOase M1 . The GOase Y329S/R330F electrode has a response to BnOH with a linear range of 0.04 to 3.25 mM (R2 =0.9985), a sensitivity of 122.78 µA mM-1 cm-2 , and a detection limit of 0.03 mM (S/N=3). Coupling an electrochromic Prussian blue (PB) cathode helps the successful sensing visualization without any further power supply. The present sensing is more convenient and user-friendly than the generally used gas chromatography (GC) and high performance liquid chromatography (HPLC), and brings a more accessible solution to the field of quality controlling.

Direct Hydroxylarylation of Benzylic Carbons (sp3/sp2/sp) via Radical-Radical Cross-Coupling Powered by Paired Electrolysis.

Diaryl alcohol moieties are widespread in pharmaceuticals. Existing methods for the synthesis of diaryl alcohols require the use of pre-functionalized benzylic alcohols, aromatic aldehydes, or ketones as starting materials. Herein, the first convergent paired electrochemical approach to the direct hydroxylarylation of unactivated benzylic carbons (sp3/sp2/sp) is proposed. This protocol features direct functionalization of unactivated benzylic C(sp3)-H bonds and benzylic sp2/sp-carbons, mild conditions (open air, room temperature), an environmentally friendly procedure (without any external catalyst/mediator/additive), and direct access to sterically hindered alcohols from inexpensive and readily available alkyl/alkenyl/alkynylbenzenes. Mechanistic studies, including divided-cell experiments, isotope labeling, radical trapping, electron paramagnetic resonance, reaction kinetics, and cyclic voltammetry, strongly support the proposed radical-radical cross-coupling between transient ketyl radicals and persistent radical anions. Gram-scale synthesis and diversification of drug derivatives have visualized the tremendous potential of this protocol for practical applications.

Microwave-Assisted Synthesis of E-Aldimines, N-Heterocycles, and H2 by Dehydrogenative Coupling of Benzyl Alcohol and Aniline Derivatives Using CoCl2 as a Catalyst.

The acceptorless dehydrogenative coupling (ADC) between alcohols and amines to produce imines has been achieved mostly by employing precious-metal-based complexes or complexes of earth-abundant metal ions with sensitive and complicated ligand systems as catalysts mostly under harsh reaction conditions. Methodologies using readily available earth-abundant metal salts as catalysts without the requirement of ligand, oxidant, or any external additives are not explored. We report an unprecedented microwave-assisted CoCl2-catalyzed acceptorless dehydrogenative coupling of benzyl alcohol and amine for the synthesis of E-aldimines, N-heterocycles, and H2 under mild condition, without any complicated exogenous ligand template, oxidant, or other additives. This environmentally benign methodology exhibits broad substrate scope (43 including 7 new products) with fair functional-group tolerance on the aniline ring. Detection of metal-associated intermediate by gas chromatography (GC) and HRMS, H2 detection by GC, and kinetic isotope effect reveal the mechanism of this CoCl2-catalyzed reaction to be via ADC. Furthermore, kinetic experiments and Hammett analysis with variation in the nature of substituents over the aniline ring reveal the insight into the reaction mechanism with different substituents.

One-Electron Oxidant-Induced Transformations of Aromatic Alcohol to Ketone Moieties in Dissolved Organic Matter Increase Trichloromethane Formation.

Radicals in advanced oxidation processes (AOPs) degrade micropollutants during water and wastewater treatment, but the transformation of dissolved organic matter (DOM) may be equally important. Ketone moieties in DOM are known disinfection byproduct precursors, but ketones themselves are intermediates produced during AOPs. We found that aromatic alcohols in DOM underwent transformation to ketones by one-electron oxidants (using SO4•- as a representative), and the formed ketones significantly increased trichloromethane (CHCl3) formation potential (FP) upon subsequent chlorination. CHCl3-FPs from aromatic ketones (Ar-CO-CH3, average of 22 mol/mol) were 6-24 times of CHCl3-FPs from aromatic alcohols (Ar-CH(OH)-CH3, average of 0.85 mol/mol). At a typical SO4•- exposure of 7.0 × 10-12 M·s, CHCl3-FPs from aromatic alcohol transformation increased by 24.8%-112% with an average increase of 53.4%. Notably, SO4•- oxidation of aliphatic alcohols resulted in minute changes in CHCl3-FPs due to their low reactivities with SO4•- (∼107 M-1 s-1). Other one-electron oxidants (Cl2•-, Br2•-,and CO3•-) are present in AOPs and also lead to aromatic alcohol-ketone transformations similar to SO4•-. This study highlights that subtle changes in DOM physicochemical properties due to one-electron oxidants can greatly affect the reactivity with free chlorine and the formation of chlorinated byproducts.

A Comparative Analysis of Local Anesthetics: Injection Associated Pain and Duration of Anesthesia.

BACKGROUND: Local anesthesia administration is frequently the most painful step of dermatologic surgery. Identification of an anesthetic that minimizes infiltration pain and toxicity while maximizing duration of action would improve both patient satisfaction and procedural safety. This study compared eight local anesthetic solutions to identify the composition that minimizes infiltration pain, maximizes duration of effect, and minimizes amount of local anesthetic needed. METHODS: In a double-blinded study, thirty subjects were injected with eight local anesthetic solutions of varied concentrations of lidocaine, epinephrine, benzyl alcohol, and sodium bicarbonate. Infiltration pain was rated by subjects using a visual analog scale and duration of anesthesia was assessed by needle prick sensation every 15 minutes. RESULTS: Solutions 2, 7, and 8, were significantly less painful (P<0.001), though not statistically different from each other. Two of the three solutions were buffered 10:1 with sodium bicarbonate. Additionally, two of the three contained notably decreased concentrations of lidocaine, 0.091% and 0.083%, than traditionally used in practice. The use of benzyl alcohol did not result in a reduction of reported pain. The duration of action was equal among the solutions regardless of anesthetic concentration. CONCLUSIONS: A solution of 0.091% lidocaine with epinephrine 1:1,100,000 and 0.82% benzyl alcohol reduces medication dose while ensuring maximum patient comfort and, theoretically, increases shelf life. While considered off-label, clinically effective dermal anesthesia may be obtained at a lower concentration of lidocaine and epinephrine than is commonly used, aiding conservative use of local anesthetic, particularly during times of national shortage. J Drugs Dermatol. 2023;22(4): doi:10.36849/JDD.5183 Citation: Moses A, Klager S, Weinstein A, et al. A comparative analysis of local anesthetics: Injection associated pain and duration of anesthesia. J Drugs Dermatol. 2023;22(4):364-368. doi:10.36849/JDD.5183.

Photocatalytic performance of SiO2@TiO2 spheres in selective conversion of oxidation of benzyl alcohol to benzaldehyde and reduction of nitrobenzene to aniline.

Selective photocatalytic oxidation of benzyl alcohol to benzaldehyde and reduction of nitrobenzene to aniline reactions are investigated by using SiO2@TiO2 spheres produced in a simple route using chitosan as a template. The spheres are predominantly macroporous and, the XRD points out an amorphous crystallographic profile suggesting the uniform distribution of TiO2. Under low-power lighting for 4 hours, the conversions achieved was of the order of 49% and 99% for benzyl alcohol and nitrobenzene, respectively, with selectivity to benzaldehyde and aniline of 99% in both reactions. The study also follows the effects of the solvent and the presence of O2.

Using the Colloidal Method to Prepare Au Catalysts for the Alkylation of Aniline by Benzyl Alcohol.

Using the colloidal method, attempts were made to deposit Au NPs on seven different material supports (TiO2, α and γ-Al2O3, HFeO2, CeO2, C, and SiO2). The deposition between 0.8 and 1 wt% of Au NPs can be generally achieved, apart for SiO2 (no deposition) and α-alumina (0.3 wt%). The resultant sizes of the Au NPs were dependent on the nature as well as the surface area of the support. The catalytic activity and selectivity of the supported Au catalysts were then compared in the alkylation of aniline by benzyl alcohol. Correlations were made between the nature of the support, the size of the Au NP, and the H-binding energy. A minimum H-binding energy of 1100 µV K-1 was found to be necessary for high selectivity for the secondary amine. Comparisons of the TEM images of the pre- and post-reaction catalysts also revealed the extent of Au NP agglomeration under the reaction conditions.

Molecular Mechanism of Antimicrobial Excipient-Induced Aggregation in Parenteral Formulations of Peptide Therapeutics.

Antimicrobial preservatives are used as functional excipients in multidose formulations of biological therapeutics to destroy or inhibit the growth of microbial contaminants, which may be introduced by repeatedly administering doses. Antimicrobial agents can also induce the biophysical instability of proteins and peptides, which presents a challenge in optimizing the drug product formulation. Elucidating the structural basis for aggregation aids in understanding the underlying mechanism and can offer valuable knowledge and rationale for designing drug substances and drug products; however, this remains largely unexplored due to the lack of high-resolution characterization. In this work, we utilize solution nuclear magnetic resonance (NMR) as an advanced biophysical tool to study an acylated 31-residue peptide, acyl-peptide A, and its interaction with commonly used antimicrobial agents, benzyl alcohol and m-cresol. Our results suggest that acyl-peptide A forms soluble octamers in the aqueous solution, which tumble slowly due to an increased molecular weight as measured by diffusion ordered spectroscopy and 1H relaxation measurement. The addition of benzyl alcohol does not induce aggregation of acyl-peptide A and has no chemical shift perturbation in 1H-1H NOESY spectra, suggesting no detectable interaction with the peptide. In contrast, the addition of 1% (w/v) m-cresol results in insoluble aggregates composed of 25% (w/w) peptides after a 24-hour incubation at room temperature as quantified by 1H NMR. Interestingly, 1H-13C heteronuclear single-quantum coherence and 1H-1H total correlation experiment spectroscopy have identified m-cresol and peptide interactions at specific residues, including Met, Lys, Glu, and Gln, suggesting that there may be a combination of hydrophobic, hydrogen bonding, and electrostatic interactions with m-cresol driving this phenomenon. These site-specific interactions have promoted the formation of higher-order oligomerization such as dimers and trimers of octamers, eventually resulting in insoluble aggregates. Our study has elucidated a structural basis of m-cresol-induced self-association that can inform the optimized design of drug substances and products. Moreover, it has demonstrated solution NMR as a high-resolution tool to investigate the structure and dynamics of biological drug products and provide an understanding of excipient-induced peptide and protein aggregation.

Two-Step Kinetic Resolution of Racemic Secondary Benzylic Alcohols Using the Combination of Enantioselective Silylation and Acylation: One-Pot Procedure Catalyzed by Chiral Guanidine.

A novel two-step kinetic resolution of racemic secondary benzylic alcohols with practical enantiomeric ratios was achieved. The reactions were carried out via a one-pot operation by combining enantioselective silylation and acylation mediated by the same chiral guanidine catalyst.

Hemilabile Amine-Functionalized Efficient Azo-Aromatic Cu-Catalysts Inspired by Galactose Oxidase: Impact of Amine Sidearm on Catalytic Aerobic Oxidation of Alcohols.

A series of azo-aromatic copper(II) complexes, [1a-g] and a Cu(I) complex, [1h], with varying amine-functionalized hemilabile pincer-like [HL1-3] and [L1,2], methyl-substituted azo [L3], and imine [L4] ligands, were synthesized and characterized. These complexes were investigated for aerobic oxidation of a variety of aromatic alcohols in the presence of 2.0 mol % precatalysts [1a-g], cobaltocene (2.0 mol %), N-methyl imidazole (NMI) (8.0 mol %), and TEMPOH (2.0 mol %) at room temperature. The Cu(I) complex (1h) acted as a catalyst in the absence of cobaltocene. To understand the mechanism, detailed experimental and theoretical studies have been performed with the representative complex [1a], which has suggested a new kind of mechanism involving a Cu(II)/Cu(I) redox couple. Cobaltocene acts as a reductant to [1a] to generate a Cu(I) complex, which activates dioxygen in the presence of NMI. TEMPOH transfers a hydrogen atom to the activated dioxygen with the generation of TEMPO•, which further participates in α-C-H bond activation in the Cu(II)-alkoxide intermediate in an intermolecular fashion in the catalytic cycle. The amine sidearm in the ligand backbone of the complexes has a significant role in catalytic activity. Complexes with amine sidearms are more effective than complexes without them. Moreover, the aliphatic secondary amine sidearm is more efficient among the amine sidearm than the aromatic secondary amine and tertiary amines. The amine sidearm that remained coordinated to the Cu(II) center is hemilabile, and it facilitates alcohol coordination in the catalytic process. Alcohol coordination was the rate-limiting step, and it was supported by the isotope effect study on benzyl alcohol, substitution effect on the amine moiety of the ligands, and DFT calculation. The hemilabile amine sidearm of the coordinated ligand also acted as a base in deprotonating the alcoholic O-H proton and acted as an acid in releasing H2O2 during the catalysis.

Quantitative assay for farnesol and the aromatic fusel alcohols from the fungus Candida albicans.

The dimorphic fungus Candida albicans is a commensal and opportunistic fungal pathogen of humans. It secretes at least four small lipophilic molecules, farnesol and three aromatic fusel alcohols. Farnesol has been identified as both a quorum sensing molecule (QSM) and a virulence factor. Our gas chromatography (GC)-based assay for these molecules exhibits high throughput, prevention of analyte loss by avoiding filtration and rotary evaporation, simultaneous cell lysis and analyte extraction by ethyl acetate, and the ability to compare whole cultures with their cell pellets and supernatants. Farnesol synthesis and secretion were separable phenomena and pellet:supernatant ratios for farnesol were high, up to 12:1. The assay was validated in terms of precision, specificity, ruggedness, accuracy, solution stability, detection limits (DL), quantitation limits (QL), and dynamic range. The DL for farnesol was 0.02 ng/µl (0.09 µM). Measurement quality was assessed by the relative error of the whole culture versus the sum of pellet and supernatant fractions (WPS). C. albicans strain SC5314 grown at 30 °C in complex and defined media (YPD and mRPMI) was assayed in biological triplicate 17 times over 3 days. Farnesol and the three aromatic fusel alcohols can be measured in the same assay. The levels of all four are greatly altered by the growth medium chosen. Significantly, the three fusel alcohols are synthesized during stationary phase, not during growth. They are secreted quickly without being retained in the cell pellet and may accumulate up to mM concentrations. KEY POINTS: • Quantitative analysis of both intra- and extracellular farnesol, and aromatic fusel oils. • High throughput, whole culture assay with simultaneous lysis and extraction. • Farnesol secretion and synthesis are distinct and separate events.

7% sodium citrate (with benzyl alcohol) as catheter lock: Dedication or obsession?

The standard heparin lock for dialysis catheters in US dialysis units is 1000 units/ml, though its use has significant limitations and problems. The alternative catheter lock of 4% sodium citrate is used in some patients, but a 7% solution would maintain catheter patency better than the 4% concentration. In spite of the failure of two prior catheter locks to become widely used in the US (highly concentrated citrate and Zuragen™), Ash Access worked with a compounding pharmacy to produce 7% sodium citrate with preservative in single-patient use frangible vials, at a reasonable cost to users. The product had early acceptance by a number of dialysis units and hospitals, but then follow-up orders were few. Where the project goes from here is unclear.

Toxic benzyl alcohol inhalation: Altered mental status with metabolic acidosis and hyperammonemia.

This report presents the case of a patient whose inhalation exposure to benzyl alcohol led to clinical manifestations similar to toluene intoxication, including sudden altered mental status, metabolic acidosis, hypokalemia, hypophosphatemia, and hyperammonemia. Toxicity from benzyl alcohol inhalation is quite rare, and hyperammonemia associated with renal tubular dysfunction in poisoning cases has not been reported in the past.