The Display of Single-Domain Antibodies on the Surfaces of Connectosomes Enables Gap Junction-Mediated Drug Delivery to Specific Cell Populations.

Gap junctions, transmembrane protein channels that directly connect the cytoplasm of neighboring cells and enable the exchange of molecules between cells, are a promising new frontier for therapeutic delivery. Specifically, cell-derived lipid vesicles that contain functional gap junction channels, termed Connectosomes, have recently been demonstrated to substantially increase the effectiveness of small molecule chemotherapeutics. However, because gap junctions are present in nearly all tissues, Connectosomes have no intrinsic ability to target specific cell types, which potentially limits their therapeutic effectiveness. To address this challenge, here we display targeting ligands consisting of single-domain antibodies on the surfaces of Connectosomes. We demonstrate that these targeted Connectosomes selectively interact with cells that express a model receptor, promoting the selective delivery of the chemotherapeutic doxorubicin to this target cell population. More generally, our approach has the potential to boost cytoplasmic delivery of diverse therapeutic molecules to specific cell populations while protecting off-target cells, a critical step toward realizing the therapeutic potential of gap junctions.

Oriented covalent immobilization of antibodies for measurement of intermolecular binding forces between zipper-like contact surfaces of split inteins.

In order to measure the intermolecular binding forces between two halves (or partners) of naturally split protein splicing elements called inteins, a novel thiol-hydrazide linker was designed and used to orient immobilized antibodies specific for each partner. Activation of the surfaces was achieved in one step, allowing direct intermolecular force measurement of the binding of the two partners of the split intein (called protein trans-splicing). Through this binding process, a whole functional intein is formed resulting in subsequent splicing. Atomic force microscopy (AFM) was used to directly measure the split intein partner binding at 1 µm/s between native (wild-type) and mixed pairs of C- and N-terminal partners of naturally occurring split inteins from three cyanobacteria. Native and mixed pairs exhibit similar binding forces within the error of the measurement technique (~52 pN). Bioinformatic sequence analysis and computational structural analysis discovered a zipper-like contact between the two partners with electrostatic and nonpolar attraction between multiple aligned ion pairs and hydrophobic residues. Also, we tested the Jarzynski's equality and demonstrated, as expected, that nonequilibrium dissipative measurements obtained here gave larger energies of interaction as compared with those for equilibrium. Hence, AFM coupled with our immobilization strategy and computational studies provides a useful analytical tool for the direct measurement of intermolecular association of split inteins and could be extended to any interacting protein pair.

Label-free electrochemical diagnosis of viral antigens with genetically engineered fusion protein.

We have developed a simple electrochemical biosensing strategy for the label-free diagnosis of hepatitis B virus (HBV) on a gold electrode surface. Gold-binding polypeptide (GBP) fused with single-chain antibody (ScFv) against HBV surface antigen (HBsAg), in forms of genetically engineered protein, was utilized. This GBP-ScFv fusion protein can directly bind onto the gold substrate with the strong binding affinity between the GBP and the gold surface, while the recognition site orients toward the sample for target binding at the same time. Furthermore, this one-step immobilization strategy greatly simplifies a fabrication process without any chemical modification as well as maintaining activity of biological recognition elements. This system allows specific immobilization of proteins and sensitive detection of targets, which were verified by surface plasmon resonance analysis and successfully applied to electrochemical cyclic voltammetry and impedance spectroscopy upto 0.14 ng/mL HBsAg.

DNA-encoding to improve performance and allow parallel evaluation of the binding characteristics of multiple antibodies in a surface-bound immunoassay format.

High affinity capture agents against protein targets are essential components for immunoassays, regardless of specific analysis format. Here, we describe the use of DNA-encoded antibodies for rapidly screening the kinetic and equilibrium binding properties of twelve commercial antibodies in a parallel analysis format using a multiplexed array of microring optical resonators. We show that DNA-encoding offers advantages in terms of antigen binding capacity, compared to covalently tethered antibodies; we also demonstrate that this linkage modality facilitates the rapid self-assembly of multiplexed arrays on account of complementarity between the DNA sequences on the antibodies and sensor array, respectively. Furthermore, DNA-encoded antibodies also allow for sensor array regeneration and reprogramming, as chaotropic agents can be used to disrupt the DNA-DNA duplexes that link the capture agents to the sensor without harming the underlying DNA on the surface, which can subsequently be reloaded with antibodies either targeting the same or different antigens.

Direct Immobilization of Engineered Nanobodies on Gold Sensors.

Single-domain antibodies, known as nanobodies, have great potential as biorecognition elements for sensors because of their small size, affinity, specificity, and robustness. However, facile and efficient methods of nanobody immobilization are sought that retain their maximum functionality. Herein, we describe the direct immobilization of nanobodies on gold sensors by exploiting a modified cysteine strategically positioned at the C-terminal end of the nanobody. The experimental data based on secondary ion mass spectrometry, circular dichroism, and surface plasmon resonance, taken together with a detailed computational work (molecular dynamics simulations), support the formation of stable and well-oriented nanobody monolayers. Furthermore, the nanobody structure and activity is preserved, wherein the nanobody is immobilized at a high density (approximately 1 nanobody per 13 nm2). The strategy for the spontaneous nanobody self-assembly is simple and effective and possesses exceptional potential to be used in numerous sensing platforms, ranging from clinical diagnosis to environmental monitoring.

Direct immobilization of functional single-chain variable fragment antibodies (scFvs) onto a polystyrene plate by genetic fusion of a polystyrene-binding peptide (PS-tag).

Single-chain Fv antibodies (scFv) genetically fused with polystyrene-binding peptides (PS-tags, (PS19-1; RAFIASRRIRRP, PS19-6; RIIIRRIRR)) were generated by recombinant Escherichia coli for direct and site-specific immobilization of scFv on polystyrene supports with high antigen-binding activity. PS-tag-fused scFvs (scFv-PS-tags) specific for human C-reactive protein (CRP) were successfully over-expressed as an inclusion body and were refolded using the batch-dilution method. When scFv-PS-tags were immobilized on a hydrophilic PS (phi-PS) plate in the presence of Tween 20, they showed high antigen-binding activity comparable to, or greater than, that of a whole monoclonal antibody (mAb) on a hydrophobic PS (pho-PS) plate, which has been the exclusive method for enzyme-linked immunosorbent assay (ELISA). Furthermore, when a scFv-PS-tag was used as a ligand antibody in one- and two-step ELISA, the assay time was reduced without loss of sensitivity. These results indicate that strong and specific attachment of PS-tags onto the phi-PS surface prevented scFv conformational changes and consequently, the high antigen-binding activities of scFvs were preserved. Nearly identical results were obtained by use of PS-tag-fused scFvs with different VH/VL pairs. Therefore, a variety of scFvs could be functionalized onto phi-PS plates by genetic fusion of PS-tags. ScFv-PS-tags, which possess high antigen-binding activity on the phi-PS plate, are more useful ligand antibodies than whole mAbs. Thus, scFv-PS-tags are applicable in both clinical diagnosis and proteomic research.

A panel of synthetic antibodies that selectively recognize and antagonize members of the interferon alpha family.

The 12 distinct subtypes that comprise the interferon alpha (IFNα) family of cytokines possess anti-viral, anti-proliferative and immunomodulatory activities. They are implicated in the etiology and progression of many diseases, and also used as therapeutic agents for viral and oncologic disorders. However, a deeper understanding of their role in disease is limited by a lack of tools to evaluate single subtypes at the protein level. Antibodies that selectively inhibit single IFNα subtypes could enable interrogation of each protein in biological samples and could be used for characterization and treatment of disease. Using phage-displayed synthetic antibody libraries, we have conducted selections against 12 human IFNα subtypes to explore our ability to obtain fine-specificity antibodies that recognize and antagonize the biological signals induced by a single IFNα subtype. For the first time, we have isolated antibodies that specifically recognize individual IFNα subtypes (IFNα2a/b, IFNα6, IFNα8b and IFNα16) with high affinity that antagonize signaling. Our results show that highly specific antibodies capable of distinguishing between closely related cytokines can be isolated from synthetic libraries and can be used to characterize cytokine abundance and function.

Site-directed immobilization of a genetically engineered anti-methotrexate antibody via an enzymatically introduced biotin label significantly increases the binding capacity of immunoaffinity columns.

In this study, the effect of random vs. site-directed immobilization techniques on the performance of antibody-based HPLC columns was investigated using a single-domain camelid antibody (VHH) directed against methotrexate (MTX) as a model system. First, the high flow-through support material POROS-OH was activated with disuccinimidyl carbonate (DSC), and the VHH was bound in a random manner via amines located on the protein's surface. The resulting column was characterized by Frontal Affinity Chromatography (FAC). Then, two site-directed techniques were explored to increase column efficiency by immobilizing the antibody via its C-terminus, i.e., away from the antigen-binding site. In one approach, a tetra-lysine tail was added, and the antibody was immobilized onto DSC-activated POROS. In the second site-directed approach, the VHH was modified with the AviTag peptide, and a biotin-residue was enzymatically incorporated at the C-terminus using the biotin ligase BirA. The biotinylated antibody was subsequently immobilized onto NeutrAvidin-derivatized POROS. A comparison of the FAC analyses, which for all three columns showed excellent linearity (R(2)>0.999), revealed that both site-directed approaches yield better results than the random immobilization; the by far highest efficiency, however, was determined for the immunoaffinity column based on AviTag-biotinylated antibody. As proof of concept, all three columns were evaluated for quantification of MTX dissolved in phosphate buffered saline (PBS). Validation using UV-detection showed excellent linearity in the range of 0.04-12µM (R(2)>0.993). The lower limit of detection (LOD) and lower limit of quantification (LLOQ) were found to be independent of the immobilization strategy and were 40nM and 132nM, respectively. The intra- and inter-day precision was below 11.6%, and accuracy was between 90.7% and 112%. To the best of our knowledge, this is the first report of the AviTag-system in chromatography, and the first application of immunoaffinity chromatography for the analysis of MTX.

Genetic fusion of single-chain variable fragments to partial spider silk improves target detection in micro- and nanoarrays.

Immobilizing biomolecules with retained functionality and stability on solid supports is crucial for generation of sensitive immunoassays. However, upon use of conventional immobilization strategies, a major portion of the biomolecules (e.g. antibodies) frequently tends to lose their bioactivity. In this study, we describe a procedure to immobilize human single-chain variable fragment (scFv) via genetic fusion to partial spider silk, which have a high tendency to adhere to solid supports. Two scFvs, directed towards serum proteins, were genetically fused to partial spider silk proteins and expressed as silk fusion proteins in E. coli. Antigen binding ability of scFvs attached to a partial silk protein denoted RC was investigated using microarray analysis, whereas scFvs fused to the NC silk variant were examined using nanoarrays. Results from micro- and nanoarrays confirmed the functionality of scFvs attached to both RC and NC silk, and also for binding of targets in crude serum. Furthermore, the same amount of added scFv gives higher signal intensity when immobilized via partial spider silk compared to when immobilized alone. Together, the results suggest that usage of scFv-silk fusion proteins in immunoassays could improve target detection, in the long run enabling novel biomarkers to be detected in crude serum proteomes.

Efficient preparation and site-directed immobilization of VHH antibodies by genetic fusion of poly(methylmethacrylate)-binding peptide (PMMA-Tag).

A PMMA-binding peptide (PMMA-tag) was genetically fused with the C-terminal region of an anti-human chorionic gonadotropin (hCG) single-domain antibody (VHH). It was over-expressed in an insoluble fraction of E. coli cells, and recovered in the presence of 8 M urea via one-step IMAC purification. Monomeric and denatured PMMA-tag-fused VHH (VHH-PM) was successfully prepared via the reduction and oxidation of VHH-PM at a concentration less than 1 mg/mL in the presence of 8 M of urea. Furthermore, the VHH-PM was refolded with a recovery of more than 95% by dialysis against 50 mM TAPS at pH 8.5, because the genetic fusion of PMMA-tag resulted in a decrease in the apparent isoelectric point (pI) of the fusion protein, and its solubility at weak alkaline pH was considerably increased. The antigen-binding activities of VHH-PM in the adsorptive state were 10-fold higher than that of VHH without a PMMA-tag. The density of VHH-PM on a PMMA plate was twice that of VHH, indicating that the site-directed attachment of a PMMA-tag resulted in positive effects to the adsorption amount as well as to the orientation of VHH-PM in its adsorptive state. The preparation and immobilization methods for VHH-PM against hCG developed in the present study were further applied to VHH-PMs against four different antigens, and consequently, those antigens with the concentrations lower than 1 ng/mL were detected by the sandwich ELISA. Thus, the VHH-PMs developed in the present study are useful for preparation of high-performance and economical immunosorbent for detection of biomarkers.

Comparison of single domain antibody immobilization strategies evaluated by surface plasmon resonance.

The use of single domain antibodies (sdAbs) in place of conventional antibodies for both therapeutic and diagnostic applications continues to grow. SdAbs offer a number of advantages when compared to conventional antibodies such as their small size and low structural complexity which allows them to readily be produced as fusions in a variety formats. In this work we compared the utility of various C-terminal fusions and immobilization strategies for two sdAbs; one which recognizes ricin and the other EA1, an S-layer protein, of Bacillus anthracis. Comparisons were made between direct covalent attachment and affinity immobilization using a biotin-streptavidin interaction for the standard sdAb monomers, randomly and site-specifically biotinylated monomers, and fusion constructs of alkaline phosphatase dimers and streptavidin core tetramers. The sdAb binding and regeneration was evaluated by surface plasmon resonance in a multiplexed format. The construct that provided the highest density of active molecules by at least a factor of two was the sdAb-streptavidin core tetramer, followed by the sdAb-alkaline phosphatase and then the site-specifically biotinylated monomer. The poorest performing immobilization methods were the two most common, direct covalent attachment and the randomly biotinylated sdAb attached via NeutrAvidin. These improvements directly correlated to antigen capture in SPR assays. Similarly, the oriented immobilization method also translated to improvements in limit of detection assays using a bead-based system. The sdAb-streptavidin core provided more than a 100-fold improvement in the limit of detection of EA1, from ~200 ng/mL to to 1.6 ng/mL, while improvement for ricin detection was less but still a significant 5-fold decrease, going from 1.6 ng/mL down to 0.32 ng/mL. This demonstrated improvement in limits of detection is an advantage that should be transferable to most assay formats.

Oriented immobilization of antibody fragments on Ni-decorated single-walled carbon nanotube devices.

We herein demonstrate that Ni-decorated single-walled carbon nanotube field effect transistors (SWNT-FETs) combined with antibody fragments can be used as effective biosensing platforms. Nanoscales Ni particles 20 to 60 nm in diameter were formed on the sidewalls of SWNT-FETs using an electrochemical method. Carcinoembryonic antigen (CEA)-binding single chain variable fragments (scFvs) with a hexahistidine tag [(his)(6)] were synthesized using genetic engineering, and ordered immobilization of anti-CEA ScFvs on Ni nanoparticles was achieved by exploiting the specific interaction between hexahistidine and Ni. Whereas randomly oriented anti-CEA scFvs did not impart a noticeable change of conductance upon addition of CEA, a clear increase in conductance was observed using Ni-decorated SWNT-FETs functionalized with engineered scFvs.