Non-invasive evaluation of toxicity in vitreoretinal domain following insertion of sustained release methotrexate micro-implant.

PURPOSE: To evaluate the safety and toxicity profile of a chitosan (CS) and poly(lactic-co-glycolic) acid (PLGA)-based sustained release methotrexate (MTX) intravitreal micro-implant in normal rabbit eyes using non-invasive testing that included electroretinography (ERG), ultrasound biomicroscopy (US), slit-lamp biomicroscopy (SLB), funduscopy, and intraocular pressure (IOP). METHODS: PLGA-coated CS-based micro-implants containing 400 µg of MTX and placebo (without drug) micro-implants were surgically-implanted in the vitreous of the right and the left eyes, respectively, in each of the thirty New Zealand rabbits. ERG, US, SLB, funduscopy, and IOP were assessed in both eyes at pre-determined time points (days: 1, 3, 7, 14, 28 and 56). The safety of micro-implants was assessed by analyzing the ERG data using different statistical models, to quantify and compare the functional integrity of the retina. Further, US, funduscopy, SLB and IOP determined the condition of the retina, the micro-implant and associated intraocular features. RESULTS: Statistical analyses of the ERG data showed unchanged functional integrity of retina between eyes with the PLGA-coated CS-based MTX micro-implant and the placebo micro-implant. US analysis showed that micro-implants were stationary throughout the study. SLB, funduscopy and IOP further confirmed that there were no abnormalities in the intraocular physiology. CONCLUSION: The findings from ERG, US, SLB, funduscopy, and IOP showed no detectable adverse effects caused by our biodegradable micro-implants. These non-invasive techniques appeared to show lack of significant ocular toxicity over time in spite of degradation and changes in morphology of the micro-implants following intraocular implantation.

PLGA nanoparticles containing Lingzhi extracts rescue corneal epithelial cells from oxidative damage.

Oxidative stress-related ocular surface epithelial damage can be initiated by ambient oxygen, UV radiation, and chemical burns. The oxidative damage to cornea can lead to inflammation and even vision loss. Lingzhi (Ganoderma lucidum) is a Chinese herbal drug and has been shown to prevent chronic diseases in clinical practices and has been proven to possess anti-oxidative and anti-inflammatory properties. In the study, we prepared poly (lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) as a sustained drug release system of Lingzhi (LZH) to improve bioavailability. The particle size of developed NPs containing LZH (LZH-NPs) was ~184 nm with narrow size distribution. The results of cellular uptake revealed that using NPs as a drug delivery system could significantly increases the intracellular retention time. The results of the cell viability and chemiluminescence assay revealed that 5 µg/ml of LZH-NPs might be the threshold concentration for cultivation of corneal epithelial cells. After treating LZH-NPs in oxidative damaged cells, the results showed that the inflammation-related gene expression and DNA fragmentation level were both significantly decreased. Post-treatment of LZH-NPs in damaged corneal epithelial cells could increase the cell survival rate. In the rabbit corneal alkali burn model, topical instillation of LZH-NPs could promote corneal wound healing and decrease the inflammation. These results suggest that LZH-NPs may have the potential to treat ocular surface diseases caused by oxidative stress.

Nerve conduit based on HAP/PDLLA/PRGD for peripheral nerve regeneration with sustained release of valproic acid.

The nerve conduits have been developed for nerve defect repair. However, no artificial conduits have obtained comparable results to autografts to bridge the large gaps. A possible reason for this poor performance may be a lack of sustainable neurotrophic support for axonal regrowth. Previous studies suggested nanocomposite conduits can be used as a carrier for valproic acid (VPA), a common drug that can produce effects similar to the neurotrophic factors. Here, we developed the novel bioabsorbable conduits based on hydroxyapatite/poly d-l-lactic acid (PDLLA)/poly{(lactic acid)-co-[(glycolic acid)-alt-(l-lysine)]} with sustained release of VPA. Firstly, the sustained release of VPA in this conduit was examined by high-performance liquid chromatography. Then Schwann cells were treated with the conduit extracts. The cell metabolic activity and proliferation were assayed by 3-[4,5-dimethyl-2-thiazolyl]-2,5-diphenyl-2-tetrazolium bromide and bromodeoxyuridine staining. A 10-mm segment of rat sciatic nerve was resected and then repaired, respectively, using the VPA conduit (Group A), the PDLLA conduit (Group B), or the autografts (Group C). Nerve conduction velocities (NCVs), compound muscle action potentials (CMAPs), and histological staining were assayed following the surgery. The cell metabolic activity and proliferation were significantly increased (p < .05) by the extracts from VPA-conduit extract compared to others. NCVs and CMAPs were significantly higher in Groups A and C than Group B (p < .05). The nerve density of Groups A and C was higher than Group B. There was no significant difference between Groups A and C. Taken together, this study suggested the sustained-release VPA conduit promoted peripheral nerve regeneration that was comparable to the autografts. It holds potential for future use in nerve regeneration.

Combating atherosclerosis with targeted Diosmin nanoparticles-treated experimental diabetes.

Diabetes with poor glycemic control is accompanying with an increased risk of disease namely atherosclerotic cardiovascular. Diosmin (DSN), which is obtained from citrus fruit used to assist the treatment of hemorrhoids or chronic venous atherosclerosis diseases, has an antioxidant, anti-hyperglycemic and anti-inflammatory effect. DSN is characterized by poor water solubility which limits its absorption by the gastrointestinal tract. To overcome this limitation, this study was designed to increase DSN bioavailability and solubility, through its loading on polymeric matrix; hydroxypropyl starch (HPS) and Poly lactide-glycolide-chitin (PLGA/chitin) to prepare Diosmin nanoparticles (DSN-NPs). Two methods were used to prepare DSN- NPs; Emulsion-solvent evaporation and Acid-base neutralization followed by further assessment on diabetes induced atherosclerosis The study was conducted on 50 animals assigned into 5 groups with 10 animals in each group: Group I: Normal rats received only normal saline, Group II: Diabetic rats, Group III: diabetic rats received oral DSN, Group IV: diabetic rats received DSN loaded HPS, Group V: diabetic rats received DSN loaded PLGA/chitin. Levels of total cholesterol, triglycerides, HDL-cholesterol, insulin, MDA and NO. plasminogen activator inhibitor-1 PAI-1), Paraoxonase-1(PON1), transforming growth factor-ß1 (TGF-ß1), NF-Ò¡B and Ang II were estimated. Our study revealed that, there was statistically significant difference between DSN treated group compared with DSN loaded HPS treated group and DSN loaded PLGA/chitin. Furthermore, the results obtained clearly disclosed no statistically significant difference between DSN loaded PLGA/chitin and control group exhibited DSN loaded PLGA/chitin has the higher ability to counteract the atherosclerosis factors induced by diabetes in all rats.

Effect of Manufacturing Variables and Raw Materials on the Composition-Equivalent PLGA Microspheres for 1-Month Controlled Release of Leuprolide.

The 1-month Lupron Depot (LD) is a 75/25 acid-capped poly(lactic-co-glycolic acid) (PLGA) microsphere product encapsulating water-soluble leuprolide acetate with no generic products available in the U.S. Composition-equivalent PLGA microsphere formulations to the LD as a function of raw material and manufacturing variables were developed by using the solvent evaporation encapsulation method. The following variables were adjusted: polymer supplier/polymerization type, gelatin supplier/bloom number, polymer concentration, first homogenization speed and time, volume of primary water phase, second homogenization time, volume of secondary water phase, and stirring rate. The loading and encapsulation efficiency (EE) of leuprolide and gelatin were determined to identify a large number of composition-equivalent formulations within a ±10% specification of the LD. Key physical-chemical properties of the formulations (e.g., morphology, particle size distribution, glass transition temperature (Tg), residual moisture and solvent, and porosity) were characterized to determine the effect of manufacturing variables on the product attributes. The EE of gelatin across all formulations prepared (101 ± 1%) was observed to be much higher than the EE of leuprolide (57 ± 1%). Judicious adjustment of polymer concentration, second homogenization time, and volume of second water phase was key to achieving high EE of leuprolide, although EE higher than 70% was not easily achievable owing to the difficulty of emulsifying highly viscous primary emulsion into homogeneous small droplets that could prevent peptide loss during the second homogenization under the conditions and equipment used. The in vitro release kinetics of the formulations was highly similar to the LD in a zero-order manner after ∼20% initial burst release, indicating a critical role of the composition on peptide release in this formulation. The characterization of composition-equivalent formulations described here could be useful for further development of generic leuprolide PLGA microspheres and for guiding decisions on the influence of process variables on product physicochemical attributes and release performance.

Light-triggered OVA release based on CuS@poly(lactide-co-glycolide acid) nanoparticles for synergistic photothermal-immunotherapy of tumor.

The immunotherapy played a vital role in the treatment of metastatic tumor. To further enhance the effect of the immunotherapy, the combination of photothermal effect can not only eradicate the tumor cells by hyperthermia, but also improved the antigen release in vivo to achieve enhanced immune responses. In this study, a core-shell structured nanocomplex was developed by loading of ovalbumin (OVA) and copper sulfide nanoparticles (CuS-NPs) into the poly(lactide-co-glycolide acid) nanoparticles (PLGA-NPs). The CuS-NPs exhibited favorable photothermal effect, which significantly kill the 4T1 tumor cells in vitro. The photothermal effect of the CuS-NPs accelerated the OVA release, which led to higher levels of IL-6, IL-12 and TNF-α, and activation of CD8+ T cells. Both of the OVA-PLGA-NPs and CuS-NPs with NIR light irradiation contributed inhibited primary tumor while the growth of the distant tumors was not hindered. The irradiated CuS@OVA-PLGA-NPs exhibited a minimal primary tumor because of the combined effect of photothermal therapy and immunotherapy. Moreover, the irradiated CuS@OVA-PLGA-NPs showed the most extensive distribution of CD8+ T cells in the primary and distant tumor, which blocked the rise of the distant tumor. In conclusion, the CuS@OVA-PLGA-NPs presented as a promising strategy for metastatic tumor therapy.

The impact of size and charge on the pulmonary pharmacokinetics and immunological response of the lungs to PLGA nanoparticles after intratracheal administration to rats.

Polylactide-co-glycolide (PLGA) nanoparticles are one of the most commonly explored biodegradable polymeric drug carriers for inhaled delivery. Despite their advantages as inhalable nanomedicine scaffolds, we still lack a complete understanding of the kinetics and major pathways by which these materials are cleared from the lungs. This information is important to evaluate their safety over prolonged use and enable successful clinical translation. This study aimed to determine how the size and charge of 3H-labeled PLGA nanoparticles affect the kinetics and mechanisms by which they are cleared from the lungs and their safety in the lungs. The results showed that lung clearance kinetics and retention patterns were more significantly defined by particle size, whereas lung clearance pathways were largely influenced by particle charge. Each of the nanoparticles caused transient inflammatory changes in the lungs after a single dose that reflected lung retention times.

Chrysin-loaded PLGA attenuates OVA-induced allergic asthma by modulating TLR/NF-κB/NLRP3 axis.

Asthma, one of the significant public health problems, is triggered by certain inflammatory processes in the airways that are not addressed propitiously by current therapies. Though pieces of evidence on allergic asthma mitigation by the anti-inflammatory bioflavonoid chrysin (CHR) are accumulating, poor bioavailability, and low solubility curtail drug development. To overcome these shortcomings, CHR loaded nanoparticle (CHR-NP) was formulated, and its salutary effect in preclinical murine allergic asthma model via the peroral route was evaluated. The spherical nanosized particles showed slow, sustained release in vitro. Moreover, CHR-NP dramatically reduced the serum IgE, ovalbumin (OVA)-induced lung histological alteration, as well as Th2 (T-helper 2) cytokines in the bronchoalveolar lavage fluid (BALF). It also suppressed the elevated serum pro-inflammatory cytokines and their upstream TLR/NF-κB/NLRP3 pathway activation in lung superior to CHR and almost identical to dexamethasone (DEX). Thus this study suggests the potentiality of CHR-NP in ameliorating allergic asthma progression.

Engineering of siRNA loaded PLGA Nano-Particles for highly efficient silencing of GPR87 gene as a target for pancreatic cancer treatment.

G protein-coupled receptor (GPCR) 87, is overexpressed in various cancer cells especially pancreatic cancer and plays a critical role in tumor cell survival. Nano-particles (NP) have become the essential vehicles for nucleotide internalization to the cell, due to the negative charge of nucleotides and their poor stability in blood circulation. In this study, the HEK293T cell linewas transfected with GPR87-plasmid after which the double-stranded RNA molecules targeting the GPR87 gene were prepared and purified. 1.1B4 cancer cell lines were used as model pancreatic cancer cells. Produced siRNA molecules were encapsulated in Poly(Lactic-Co-Glycolic Acid) (PLGA) nano-micelles using three different methods, two of which were according to literature with (siR-PLGA-S) or without (siR-PLGA-V) sonication. However, a new method was suggested to overcome problems such as poly-dispersity and large sizes of siR-PLGA-S and siR-PLGA-V. The new method consists of encapsulating siRNA using mild agitation to the pre-made PLGA NPs. The latter method provided mono-dispersed particles (siR-P-PLGA) with 92 nm size and desired Encapsulation Efficiency (EE%). siR-P-PLGA was able to silence the GPR-87 gene in a ratio of 83.9%, almost 41 times more effective than siR-PLGA-S and siR-PLGA-V in HEK 293 T cells. siR-P-PLGA was able to show a mild cytotoxic effect on 1.1B4 pancreatic cancer cells within 48 h.

Shear-Thinning Viscous Materials for Subconjunctival Injection of Microparticles.

While drug-loaded microparticles (MPs) can serve as drug reservoirs for sustained drug release and therapeutic effects, needle clogging by MPs poses a challenge for ocular drug delivery via injection. Two polymers commonly used in ophthalmic procedures-hyaluronic acid (HA) and methylcellulose (MC)-have been tested for their applicability for ocular injections. HA and MC were physically blended with sunitinib malate (SUN)-loaded PLGA MPs for subconjunctival (SCT) injection into rat eyes. The HA and MC viscous solutions facilitated injection through fine-gauged needles due to their shear-thinning properties as shown by rheological characterizations. The diffusion barrier presented by HA and MC reduced burst drug release and extended overall release from MPs. The significant level of MP retention in the conjunctiva tissue post-operation confirmed the minimal leakage of MPs following injection. The safety of HA and MC for ocular applications was demonstrated histologically.

Characterization of Controlled Release Microspheres Using FIB-SEM and Image-Based Release Prediction.

For polymer-based controlled release drug products (e.g. microspheres and implants), active pharmaceutical ingredient distribution and microporosity inside the polymer matrix are critical for product performance, particularly drug release kinetics. Due to the decreasing domain size and increasing complexity of such products, conventional characterization and release test techniques are limited by their resolution and speed. In this study, samples of controlled release poly(lactic-co-glycolic acid) microspheres in the diameter range of 30-80 µm are investigated with focused ion beam scanning electron microscope imaging at 20 nm or higher resolution. Image data is quantified with artificial intelligence-based image analytics to provide size distributions of drug particles and pores within the microsphere sample. With an innovative image-based numerical simulation method, release profiles are predicted in a matter of days regardless of the designed release time. A mechanistic understanding on the impact of porosity to the interplays of drug, formulation, process, and dissolution was gained.

Nanoparticles conjugated with bacteria targeting tumors for precision imaging and therapy.

The hypoxic region microenvironment reduces the susceptibility of the cancer cells to radiotherapy and anticancer drugs of the solid tumors. However, the reduced oxygen surroundings provide an appreciable habitat for anaerobic bacteria to colonize and proliferate. Herein, we present a biocompatible bacteriabased system that can deliver poly(lactic-co-glycolic acid)(PLGA) nanoparticles(PLGA NPs) specifically targeting into solid tumor to achieve precision imaging and treatment. In our strategy, anaerobic bacterium Bifidobacterium longum (B. longum) that colonizes selectively in hypoxic regions of animal body was successfully used as a vehicle to conjugate with PLGA NPs and transported into solid tumors. To improve the efficacy and specificity of tumor therapy, low-boiling point perfluorohexane (PFH) liquid was wrapped in the core of PLGA NPs (PFH/PLGA NPs), which could increase the deposition of energy by affecting the acoustic environment of the tumor and destroy cells after liquid-gas phase transition during High Intensity Focused Ultrasound (HIFU) irradiation. This strategy shows an effective diagnosis and treatment integration for giving stronger imaging, longer retention period and more effective tumor therapy.

Mesenchymal Stem Cell Capping on ECM-Anchored Caspase Inhibitor-Loaded PLGA Microspheres for Intraperitoneal Injection in DSS-Induced Murine Colitis.

Mesenchymal stem cells (MSCs) are considered as a promising alternative for the treatment of various inflammatory disorders. However, poor viability and engraftment of MSCs after transplantation are major hurdles in mesenchymal stem cell therapy. Extracellular matrix (ECM)-coated scaffolds provide better cell attachment and mechanical support for MSCs after transplantation. A single-step method for ECM functionalization on poly(lactic-co-glycolic acid) (PLGA) microspheres using a novel compound, dopamine-conjugated poly(ethylene-alt-maleic acid), as a stabilizer during the preparation of microspheres is reported. The dopamine molecules on the surface of microspheres provide active sites for the conjugation of ECM in an aqueous solution. The results reveal that the viability of MSCs improves when they are coated over the ECM-functionalized PLGA microspheres (eMs). In addition, the incorporation of a broad-spectrum caspase inhibitor (IDN6556) into the eMs synergistically increases the viability of MSCs under in vitro conditions. Intraperitoneal injection of the MSC-microsphere hybrid alleviates experimental colitis in a murine model via inhibiting Th1 and Th17 differentiation of CD4+ T cells in colon-draining mesenteric lymph nodes. Therefore, drug-loaded ECM-coated surfaces may be considered as attractive tools for improving viability, proliferation, and functionality of MSCs following transplantation.

Effects of D-α-tocopherol polyethylene glycol succinate-emulsified poly(lactic-co-glycolic acid) nanoparticles on the absorption, pharmacokinetics, and pharmacodynamics of salinomycin sodium.

Although salinomycin sodium (SS) has shown in-vitro potential to inhibit cancer stem cell growth and development, its low water solubility makes it a poor candidate as an oral chemotherapeutic agent. To improve the bioavailability of SS, SS was encapsulated here using D-α-tocopherol polyethylene glycol succinate (TPGS)-emulsified poly(lactic-co-glycolic acid) (PLGA) nanoparticles and compared with its parent SS in terms of absorption, pharmacokinetics, and efficacy in suppressing nasopharyngeal carcinomas stem cells. The pharmacokinetics of SS and salinomycin sodium-loaded D-α-tocopherol polyethylene glycol succinate-emulsified poly(lactic-co-glycolic acid) nanoparticles (SLN) prepared by nanoprecipitation were analyzed in-vivo by timed-interval blood sampling and oral administration of SS and SLN to rats. Sensitive liquid chromatography-mass spectrometry (LC-MS) was developed to quantify plasma drug concentrations. SS and SLN transport in Caco-2 cells was also investigated. The therapeutic efficacy of SS and SLN against cancer stem cells was determined by orally administering the drugs to mice bearing CNE1 and CNE2 nasopharyngeal carcinoma xenografts and then evaluating CD133 cell proportions and tumorsphere formation. The in-vivo trial with rats showed that the Cmax, AUC(0-t), and Tmax for orally administered SLN were all significantly higher than those for SS (P<0.05). These findings were corroborated by a Caco-2 cell Transwell assay showing that relative SLN absorption was greater than that of SS on the basis of their apparent permeability coefficients (Papp). Significantly, therapeutic SLN efficacy against nasopharyngeal carcinoma stem cells was superior to that of SS. TPGS-emulsified PLGA nanoparticles effectively increase SS solubility and bioavailability. SLN is, therefore, promising as an oral chemotherapeutic agent against cancer stem cells.

Local administration of aspirin with ß-tricalcium phosphate/poly-lactic-co-glycolic acid (ß-TCP/PLGA) could enhance osteoporotic bone regeneration.

Composite materials ß-tricalcium phosphate (ß-TCP) and poly-lactic-co-glycolic acid (PLGA) have achieved stable bone regeneration without cell transplantation in previous studies. Recent research shows that aspirin (ASP) has great potential in promoting bone regeneration. The objective of the present study was to incorporate PLGA into ß-TCP combined with a lower single-dose local administration of ASP to enhance its in vivo biodegradation and bone tissue growth. After the creation of a rodent critical-sized femoral metaphyseal bone defect, PLGA -modified ß-TCP (TP) was prepared by mixing sieved granules of ß-TCP and PLGA (50:50, v/v) for medical use, then TP with dripped 50 µg/0.1 ml and 100 µg/0.1 ml aspirin solution was implanted into the defect of OVX rats until death at 8 weeks. The defected area in distal femurs of rats was harvested for evaluation by histology, micro-CT, biomechanics and real time RT-PCR. The results of our study show that a single-dose local administration of ASP combined with the local usage of TP can increase the healing of defects in OVX rats. Single-dose local administration of aspirin can improve the transcription of genes involved in the regulation of bone formation and vascularization in the defect area, and inhibits osteoclast activity. Furthermore, treatments with a higher single-dose local administration of ASP and TP showed a stronger effect on accelerating the local bone formation than while using a lower dose of ASP. The results from our study demonstrate that the combination of a single-dose local administration of ASP and ß-TCP/PLGA had an additive effect on local bone formation in osteoporosis rats, and bone regeneration by PLGA/ß-TCP/ASP occured in a dose-dependent manner.

PLGA-based control release of Noggin blocks the premature fusion of cranial sutures caused by retinoic acid.

Craniosynostosis (CS), the premature and pathological fusion of cranial sutures, is a relatively common developmental disorder. Elucidation of the pathways involved and thus therapeutically targeting it would be promising for the prevention of CS. In the present study, we examined the role of BMP pathway in the all-trans retinoic acid (atRA)-induced CS model and tried to target the pathway in vivo via PLGA-based control release. As expected, the posterior frontal suture was found to fuse prematurely in the atRA subcutaneous injection mouse model. Further mechanism study revealed that atRA could repress the proliferation while promote the osteogenic differentiation of suture-derived mesenchymal cells (SMCs). Moreover, BMP signal pathway was found to be activated by atRA, as seen from increased expression of BMPR-2 and pSMAD1/5/9. Recombinant mouse Noggin blocked the atRA-induced enhancement of osteogenesis of SMCs in vitro. In vivo, PLGA microsphere encapsulated with Noggin significantly prevented the atRA-induced suture fusion. Collectively, these data support the hypothesis that BMP signaling is involved in retinoic acid-induced premature fusion of cranial sutures, while PLGA microsphere-based control release of Noggin emerges as a promising strategy for prevention of atRA-induced suture fusion.

Fabrication of rosuvastatin-loaded polymeric nanocapsules: a promising modality for treating hepatic cancer delineated by apoptotic and cell cycle arrest assessment.

Nanotechnology has provided several advantages for the treatment of cancer. Polymeric nanocapsules (PNCs) were proven promising in the treatment of different cancer types, such as hepatic cancer. Meanwhile, the exploration of novel indications of old molecules with the purpose of cancer treatment has been widely reported. Among the promising therapeutic moieties, rosuvastatin (RV) was delineated as a potential anticancer drug. Hence, the target of the presented manuscript was to develop PNCs loaded with RV to overcome its delivery challenges and augment its anticancer activity. RV PNCs were fabricated by the nanoprecipitation method using poly-lactide-co-glycolide (PLGA) polymer, and were characterized for the size, polydispersity index (PDI), charge, entrapment efficiency EE%, in vitro release, stability, and morphology. Furthermore, their anticancer activity was tested on HepG2 cells using MTT assay, followed by elucidating the cytotoxic activity using flow cytometry. Results showed that RV PNCs displayed particle size ranging from 186 to 239 nm, average PDI, and negative zeta potential with sufficient stability for 3 months. PNCs were able to load RV at high EE% reaching 82.6% and sustain its release for eight hours. RV PNCs were superior in their anticancer activity on HepG2 cells, as delineated from the viability study and further elucidated by enhanced apoptosis in addition to cell cycle arrest at G2/M phase, suggesting their promise in treatment of hepatic cancer.

Modification of Three-Phase Drug Release Mode of Octreotide PLGA Microspheres by Microsphere-Gel Composite System.

In order to obtain sustained release of biodegradable microspheres, the purpose of this study was to design and characterize an injectable octreotide microsphere-gel composite system. The octreotide microspheres were prepared by phase separation method, which used PLGA as a carrier material, dimethyl silicone oil as a phase separation reagent, and n-heptane-Span 80 as a hardener. In addition, we used poloxamer 407 (PL 407) and poloxamer 188 (PL 188) as the thermosensitive gel matrix material. The composite system was obtained by scattering octreotide microspheres in a poloxamer gel. In vitro data showed that the release time of the composite system could last for about 50 days. Because of the blocking and control actions of the poloxamer gel, the initial burst release was significantly reduced and the plateau phase was eliminated. Pharmacokinetic data showed that the burst release of the composite system was significantly less than that of the microspheres, i.e., Cmax1 was reduced by about half. From day 2 to day 50, higher plasma concentration levels and more stable drug release behavior were exhibited. In addition, the good biocompatibility of the composite system in vivo was also demonstrated by hematoxylin-eosin (HE) staining. Therefore, the octreotide microsphere-gel composite system will be a new direction for hydrophilic polypeptide/protein-loaded sustained release dosage forms with high pharmacological activity.

Dexamethasone Degradation in Aqueous Medium and Implications for Correction of In Vitro Release from Sustained Release Delivery Systems.

The in vitro drug release in an aqueous medium is a critical performance metric for a sustained release drug product. During long-term release studies, drugs may degrade in the release medium, and such degradation can lead to errors in drug release quantitation. Using dexamethasone as a model drug and LC-MS/MS methods employing dexamethasone-d4 as an internal standard, this study identified that dexamethasone can degrade into 13 major degradation products in phosphate buffered saline (PBS) as a function of time, temperature (25, 37, and 45°C), and light exposure. A putative scheme for dexamethasone degradation pathways in PBS has been proposed. In proof-of-concept studies, the analytical method was used to quantitate dexamethasone and its degradation products during in vitro release studies with sustained release dexamethasone-poly(D,L-lactide-co-glycolide) (PLGA) implants incubated in phosphate buffer saline (PBS). Further, mathematical approaches were developed to estimate drug release from implants after accounting for drug degradation in PBS. The LC-MS/MS analytical method and the mathematical approaches developed could be used for assessing the stability and/or release of dexamethasone during manufacturing, storage, and use of various dosage forms.

Potential Active Targeting of Gatifloxacin to Macrophages by Means of Surface-Modified PLGA Microparticles Destined to Treat Tuberculosis.

Tuberculosis (TB) is an infectious disease caused by Mycobacterium tuberculosis and represents one of the leading causes of mortality worldwide due to multidrug-resistant TB (MDR-TB). In our work, a new formulation of biodegradable PLGA microparticles was developed for pulmonary administration of gatifloxacin, using a surface modifier agent to actively target alveolar macrophages thereby allowing to gain access of the drug to Mycobacterium tuberculosis. For this, rapid uptake of the particles by macrophages is beneficial. This process was evaluated with fluorescein-loaded microparticles using PLGA 502 or PLGA 502H as polymers and labrafil as surface modifier. Cell phagocytosis was studied in raw 264.7 mouse macrophage cell line after 3, 5, 24, and 48 h incubation with the microparticles. Labrafil enhanced the uptake rate of PLGA 502H microparticles by macrophages which was directly related to the modification of the polymer matrix. Gatifloxacin-loaded PLGA microparticles using PLGA 502 or PLGA 502H and labrafil were prepared. From our results, only microparticles prepared with PLGA 502H and labrafil exhibited high encapsulation efficiency (89.6 ± 0.2%), rapid phagocytosis by macrophages (3 h), and remained inside the cells for at least 48 h, thereby resulting in a suitable carrier to potentially treat MDR-TB.