Jurassic shuotheriids show earliest dental diversification of mammaliaforms.

Shuotheriids are Jurassic mammaliaforms that possess pseudotribosphenic teeth in which a pseudotalonid is anterior to the trigonid in the lower molar, contrasting with the tribosphenic pattern of therian mammals (placentals, marsupials and kin) in which the talonid is posterior to the trigonid1-4. The origin of the pseudotribosphenic teeth remains unclear, obscuring our perception of shuotheriid affinities and the early evolution of mammaliaforms1,5-9. Here we report a new Jurassic shuotheriid represented by two skeletal specimens. Their complete pseudotribosphenic dentitions allow reidentification of dental structures using serial homology and the tooth occlusal relationship. Contrary to the conventional view1,2,6,10,11, our findings show that dental structures of shuotheriids can be homologized to those of docodontans and partly support homologous statements for some dental structures between docodontans and other mammaliaforms6,12. The phylogenetic analysis based on new evidence removes shuotheriids from the tribosphenic ausktribosphenids (including monotremes) and clusters them with docodontans to form a new clade, Docodontiformes, that is characterized by pseudotribosphenic features. In the phylogeny, docodontiforms and 'holotherians' (Kuehneotherium, monotremes and therians)13 evolve independently from a Morganucodon-like ancestor with triconodont molars by labio-lingual widening their posterior teeth for more efficient food processing. The pseudotribosphenic pattern passed a cusp semitriangulation stage9, whereas the tribosphenic pattern and its precursor went through a stage of cusp triangulation. The two different processes resulted in complex tooth structures and occlusal patterns that elucidate the earliest diversification of mammaliaforms.

Rolling of the jaw is essential for mammalian chewing and tribosphenic molar function.

Over the past two centuries, mammalian chewing and related anatomical features have been among the most discussed of all vertebrate evolutionary innovations1-3. Chief among these features are two characters: the dentary-only mandible, and the tribosphenic molar with its triangulated upper cusps and lower talonid basin3-5. The flexible mandibular joint and the unfused symphysis of ancestral mammals-in combination with transformations of the adductor musculature and palate-are thought to have permitted greater mobility of each lower jaw, or hemimandible6,7. Following the appearance of precise dental occlusion near the origin of the mammalian crown8,9, therians evolved a tribosphenic molar with a craggy topography that is presumed to have been used to catch, cut and crush food. Here we describe the ancestral tribosphenic therian chewing stroke, as conserved in the short-tailed opossum Monodelphis domestica: it is a simple symmetrical sequence of lower tooth-row eversion and inversion during jaw opening and closing, respectively, enacted by hemimandibular long-axis rotation. This sequence is coupled with an eversion-inversion rotational grinding stroke. We infer that the ancestral therian chewing stroke relied heavily on long-axis rotation, including symmetrical eversion and inversion (inherited from the first mammaliaforms) as well as a mortar-and-pestle rotational grinding stroke that was inherited from stem therians along with the tribosphenic molar. The yaw-dominated masticatory cycle of primates, ungulates and other bunodont therians is derived; it is necessitated by a secondarily fused jaw symphysis, and permitted by the reduction of high, interlocking cusps10-12. The development of an efficient masticatory system-culminating in the tribosphenic apparatus-allowed early mammals to begin the process of digestion by shearing and crushing food into small boli instead of swallowing larger pieces in the reptilian manner, which necessitates a long, slow and wholly chemical breakdown. The vast diversity of mammalian teeth has emerged from the basic tribosphenic groundplan13.

New craniodental fossils of Paranthropus robustus from Kromdraai, South Africa (2014-2017 excavations).

Since the initial discovery of Paranthropus robustus at the site of Kromdraai in 1938, the hypodigm of this species has been expanded by subsequent work at the localities of Swartkrans and Drimolen, with a few fossils also known from Cooper's D, Gondolin and Sterkfontein Member 5. Beginning in 2014, systematic excavations at Kromdraai uncovered a large and previously unknown fossiliferous area, shedding light on Units O and P in the earliest part of the site's stratigraphic sequence. The aim of this paper is to provide detailed descriptions and illustrations of 30 P. robustus craniodental specimens recovered between 2014 and 2017 within the Unit P deposits at Kromdraai. This new sample predates all prior conspecific specimens found at this site (including the holotype of P. robustus from Kromdraai, TM 1517). Its basic dental morphology dimensions and cranial features are compared in a preliminary analysis with other P. robustus samples. The P. robustus sample from Kromdraai Unit P documents previously unknown portions of the P. robustus juvenile cranium. The new dental and cranial remains aid in the exploration of potential morphological distinctions between site-specific P. robustus samples and are compared favorably in size and morphology with the small P. robustus specimens from Drimolen (e.g., DNH 7). These findings do not support the hypothesis that the specimens from Drimolen belong to a different taxonomic group. Instead, they reinforce the presence of a significant degree of sexual dimorphism within P. robustus. The Kromdraai Unit P specimens also contribute to the biodemographic profile of P. robustus. The notable prevalence of infants (i.e., juvenile individuals before the emergence of their first permanent molars) mirrors the natural mortality profiles observed in wild chimpanzees. This suggests a closer resemblance in the processes of accumulation in Kromdraai Unit P and Drimolen than at Swartkrans.

Developmental influence on evolutionary rates and the origin of placental mammal tooth complexity.

Development has often been viewed as a constraining force on morphological adaptation, but its precise influence, especially on evolutionary rates, is poorly understood. Placental mammals provide a classic example of adaptive radiation, but the debate around rate and drivers of early placental evolution remains contentious. A hallmark of early dental evolution in many placental lineages was a transition from a triangular upper molar to a more complex upper molar with a rectangular cusp pattern better specialized for crushing. To examine how development influenced this transition, we simulated dental evolution on "landscapes" built from different parameters of a computational model of tooth morphogenesis. Among the parameters examined, we find that increases in the number of enamel knots, the developmental precursors of the tooth cusps, were primarily influenced by increased self-regulation of the molecular activator (activation), whereas the pattern of knots resulted from changes in both activation and biases in tooth bud growth. In simulations, increased activation facilitated accelerated evolutionary increases in knot number, creating a lateral knot arrangement that evolved at least ten times on placental upper molars. Relatively small increases in activation, superimposed on an ancestral tritubercular molar growth pattern, could recreate key changes leading to a rectangular upper molar cusp pattern. Tinkering with tooth bud geometry varied the way cusps initiated along the posterolingual molar margin, suggesting that small spatial variations in ancestral molar growth may have influenced how placental lineages acquired a hypocone cusp. We suggest that development could have enabled relatively fast higher-level divergence of the placental molar dentition.

Age estimation by pulp canal/root ratio in Yorkshire terrier dogs.

Background: The study of the morphological parameters of teeth on dental radiographic images, especially evaluation of the pulp canal/root ratio (PCRR), has been presented as a reliable method to estimate age both in humans and animals. Evaluating PCRR involves a simple, nondestructive procedure that can be used both in living individuals and in cadavers. There is a scarcity of studies assessing the relationship between PCRR and age in dogs (Canis lupus familiaris). Objective: The aim of this study was to evaluate the relationship between PCRR and age in Yorkshire terrier dogs. Animals and procedures: Dental radiographs of 53 Yorkshire terrier dogs from the database of the Odontovet Veterinary Dentistry Center (Brazil) were analyzed. Using ImageJ software, 3 consecutive measurements of the widths of 2 roots (mesial and distal) and their respective pulp canals were taken at both mandibular molar teeth (left, 309 and right, 409). The PCRR was then calculated using width means. Results: The PCRR decreased with increasing age in both mesial (0.21 ± 0.09 in animals aged < 24 mo, 0.12 ± 0.04 in animals aged between 25 and 96 mo, and 0.09 ± 0.03 in dogs aged > 96 mo) and distal (0.24 ± 0.11, 1.01 ± 0.03, and 0.09 ± 0.03, by the same order) roots. A statistically significant, moderate negative correlation was demonstrated between age and PCRR of the mesial [rs (97) = -0.545; P < 0.001] and distal [rs (98) = -0.578; P < 0.001] roots. Conclusion and clinical relevance: This work contributes to the knowledge of PCRR in dogs and its relationship with age, paving the way for further studies using larger samples in different canine breeds.

Estimation de l'âge par le rapport canal pulpaire/racine chez des chiens de race Yorkshire. Contexte: L'examen des paramètres morphologiques des dents sur des radiographies dentaires, particulièrement l'évaluation du rapport canal pulpaire/racine (PCRR), a été présenté comme une méthode fiable d'estimer l'âge chez les humains et les animaux. L'évaluation du PCRR est faite au moyen d'une procédure simple et non-destructive qui peut être utilisée autant chez les individus vivants que sur des cadavres. Il y a peu d'études évaluant la relation entre le PCRR et l'âge chez les chiens (Canis lupus familiaris). Objectif: L'objectif de la présente étude était d'évaluer la relation entre le PCRR et l'âge chez des chiens de race Yorkshire. Animaux et procédures: Les radiographies dentaires de 53 chiens de race Yorkshire provenant de la base de données du Centre de dentisterie vétérinaire Odontovet (Brésil) ont été analysées. À l'aide du logiciel ImageJ, 3 mesures consécutives de la largeur de 2 racines (mésiale et distale) et de leur canal pulpaire respectif ont été prises au niveau des dents molaires mandibulaires (gauche, 309 et droite, 409). Le PCRR a par la suite été calculé utilisant les moyennes des largeurs. Résultats: Le PCRR diminuait avec une augmentation de l'âge autant pour la racine mésiale (0,21 ± 0,09 chez les animaux âgés de < 24 mo, 0,12 ± 0,04 chez les animaux âgés entre 25 et 96 mo, et 0,09 ± 0,03 chez les chiens de > 96 mo) que pour la racine distale (0,24 ± 0,11, 1,01 ± 0,03, 0,09 ± 0,03, dans le même ordre d'âge). Une différence statistiquement significative, corrélation modérément négative a été mise en évidence entre l'âge et le PCRR pour la racine mésiale [rs (97) = −0,545; P < 0,001] et la racine distale [rs (98) = −0,578; P < 0,001]. Conclusion et pertinence clinique: Cette étude contribue à la connaissance du PCRR chez les chiens et sa relation avec l'âge, ouvrant la voie à des études ultérieures avec un échantillonnage plus grand et différentes races de chien.(Traduit par Dr Serge Messier).

Morphometric variations and nonmetric anatomical traits or anomalies of the primary molar teeth, plus the molars' size thresholds for sex identification.

INTRODUCTION: Morphological and morphometric features of the teeth are of interest to various clinical and academic dental and medical fields including prosthodontics, orthodontics, anatomy and anthropology, pathology, archeology, and forensic dentistry. These have been more or less researched in the case of the permanent dentition. However when it comes to the primary dentition, the literature is scarce and controversial. No study worldwide exists on the cutoff points (thresholds) for sex identification; no study exists on metric or nonmetric traits of deciduous teeth in Iranians. Hence, the aim of the study was to assess both the metric and nonmetric traits of primary molars, as well as their cut-off points for sex identification. METHODS: In this epidemiological cross-sectional study, pretreatment casts of 110 children (51 boys and 59 girls) aged 6 to 12 years were collected. Maxillary and mandibular first and second primary molars were evaluated regarding their metric traits (mesiodistal and buccolingual widths) and 9 nonmetric traits (Accessory cusp on the upper D, Accessory cusp on the lower D, Fifth cusp on the upper E, Carabelli's cusp on the upper E, Protostylid on the lower E, Fifth cusp on the lower E, Sixth cusp on the lower E, Tuberculum intermedium [metaconulid] on the lower E, and Deflecting wrinkle on the lower E). ROC curves were used to identify cut-off points for sex determination as well as the usefulness of metric measurements for this purpose. Data were analyzed using independent-samples and paired-samples t-tests, McNemar, Fisher, and chi-square tests, plus Pearson and Spearman correlation coefficients (α = 0.05). RESULTS: All the primary molars' coronal dimensions (both mesiodistal and buccolingual) were extremely useful for sex identification (ROC curves, all P values ≤ 0.0000099). Especially, the mandibular primary molars (areas under ROC curves [AUCs] between 85.6 and 90.4%, P values ≤ 0.0000006) were more useful than the maxillary ones (AUCs between 80.4 and 83.1%, P values ≤ 0. 0000099). In the mandible, the first primary molar (maximum AUC = 90.4%) was better than the second molar (maximum AUC = 86.0%). The optimum thresholds for sex determination were reported. Sex dimorphism was significant in buccolingual and mesiodistal crown widths of all the primary molars (all P values ≤ 0.000132), but it was seen only in the case of 2 nonmetric traits: Deflecting wrinkle (P = 0.001) and Tuberculum intermedium (metaconulid, P = 0.029) on the lower Es, taking into account the unilateral and bilateral cases. The occurrence of nonmetric traits was symmetrical between the right and left sides (all P values ≥ 0.250). All mesiodistal and two buccolingual molar measurements were as well symmetrical (P > 0.1); however, two buccolingual measurements were asymmetrical: in the case of the maxillary E (P = 0.0002) and mandibular D (P = 0.019). There were three weak-to-moderate correlations between the nonmetric traits of the mandibular second molars (Spearman correlations between 22.7 and 37.5%, P values ≤ 0.045). Up to 6 concurrent nonmetric traits were observed in the sample, with 53.6% of the sample showing at least 2 concurrent nonmetric traits at the same time, without any sex dimorphism (P = 0.658). CONCLUSION: Sex dimorphism exists considerably in primary molars' sizes, but it is not as prevalent in their nonmetric traits or abnormalities. Primary molars' crown sizes are useful for sex identification; we calculated optimum cut-off points for this purpose, for the first time.

Biometric analysis of furcation area of molar teeth and its relationship with instrumentation.

The anatomy of furcation favours the bacterial retention and makes periodontal debridement as well as oral hygiene procedures difficult. Teeth that have lost attachment to a level of the furcation are said to have a furcal invasion or furcation involved.Involvement of furcation in a multi-rooted tooth poses a very different type of clinical situation in terms of establishment of diagnosis, determination of prognosis and of course planning the treatment modality.The present study was carried out on 200 selected extracted human first and second permanent molar teeth based on a predefined criteria. Teeth with prosthetic crowns, fused or fractured roots, those not fully developed, grossly carious or heavily restored at the cementoenamel junction (CEJ) were excluded from the study. The morphology of the root trunk was recorded by measuring various dimensions of the root trunk,including furcal angle and root trunk volume was calculated by using a custom made special apparatus. The furcation areas were debrided with different types of curettes in the market in order to see how best the instrument could be maneuvered in the furcation area. The data so obtained was statistically analysed using SPSS version 22. The highest root trunk volume and the longest root trunk length were found to be in the maxillary second molar. 48.60% furcations didn't allow instrument engagementof furcation area with standard area specific curettes. The proposal of inclusion of root trunk length (mm) is suggested in addition to classification of FI to have assess prognosis and appropriate treatment for of the involved tooth.

Morphology and classification of the second mesiobuccal canal in maxillary first molars: a cone-beam computed tomography analysis in a Chinese population.

BACKGROUND: Understanding the tooth anatomy is crucial for ensuring effective endodontic treatment. This study investigated the root canal morphology of the second mesiobuccal (MB2) canal in maxillary first molars (MFMs) in a Chinese population using cone-beam computed tomography (CBCT). METHODS: This study evaluated 486 MFMs with MB2 canals from 285 participants undergoing CBCT examination and determined the Vertucci's classification and position of the MB2 canal orifice. The prevalence of the MB2 canal was correlated with the sex, age, and tooth side. The correlations between the prevalence of the MB2 canal and sex and tooth side were assessed using the Fisher's exact test. The chi-square test was used for evaluating the correlation between the prevalence of the MB2 canal and age. RESULTS: The number of type II, III, IV, V, VI, VII, and other root canals in the MFMs was 30.9%, 0.6%, 65.0%, 1.2%, 1.2%, 0.4%, and 0.6%, respectively. Among the 201 cases with bilateral inclusion, 87.6% showed consistent canal configuration. Results of the first clear apparent position (FCAP) of the MB2 canals showed that 434, 44, and 3 teeth had FCAP at the upper, middle, and bottom one-third of the root, respectively. The FCAPs of the MB2 canal in the MFMs with types II, IV, and VI, as well as types III and V canals showed significant differences (p<0.05). The horizontal distance between the MB1 and MB2 canal orifices in the type II canals of MFMs was significantly lesser than those in the type IV canals of MFMs (p < 0.01). The longitudinal distance between the pulp chamber floor plane and MB2 canal orifice significantly correlated with age (p < 0.05). CONCLUSIONS: The morphology of the mesiobuccal root canal in the MFMs is complex. Complete understanding of the anatomical morphology of the root canal combined with the CBCT and dental operating microscope is necessary for the accurate detection of the MB2 canal and consequently improved success rate of root canal treatment. Our study findings can help endodontists improve endodontic treatment outcomes.

[Root canal therapy of maxillary molars with atypical canals: A report of three cases].

Maxillary molar with three roots and 3 to 4 canals is a common occurrence. However, in addition to common root canal anatomy, there may be significant differences in the number, distribution, and morphological structure of root canals. The success of root canal treatment is dependent on ensuring that all the intricate details associated with it are meticulously followed. Failure to locate all canals could have a negative effect on the treatment as it may lead to initiation or continuation of periapical pathology. Missed canals were the main reason for patients reporting back for nonsurgical root canal retreatment. Moreover, the bacteria residing in such canals could also result in persistence of symptoms. Root canal anatomy is complex, and the recognition of anatomic variations could be a challenge for clinicians. This article presents three cases of endodontic management of maxillary molars with atypical canal morphology. In the three cases of this study, the patients underwent cone beam computed tomographic (CBCT) examination before root canal treatment. The CBCT images revealed that the maxillary molars in case 1 and case 2 had 5 canals. Case 1: 2 mesiobuccal (MB, MB2), two distobuccal (DB and DB2), and one palatal canal. Case 2: 2 mesiobuccal (MB, MB2), one distobuccal (DB), and two palatal canals (MP and DP). In case 3, CBCT scan slices showed that the maxillary first molar presented as a C-shaped root canal with a rare tooth anomaly of taurodontism. Although C-shaped root canals were most frequently seen in the mandibular second molar, they might also appear in maxillary molars. A literature search revealed only a few case reports of C-shaped root canal systems in maxillary molars. Case 3 described the fusion between mesiobuccal and palatal roots of the maxillary first molar, forming a C-shaped mesiopalatal root canal. The above cases suggest that endodontists should always be aware of aberrancies in root canal system apart from the knowledge of normal root canal anatomy. CBCT as a means of diagnosis can be helpful for identifying and managing these complex root canal systems. This case series also highlights the importance of magnification and illumination. Through using an endodontic microscope, clinicians can identify root canals that are difficult to locate or overlooked with normal vision. A correct access opening is a most important step to locate and negotiate the orifices of root canals. The use of ultrasonic tips can refine the access cavity and allow controlled and delicate removal of calcifications and other interferences to the canal orifices, thereby helping to locate the extra orifices.

Dental topographic proxies for ecological characteristics in carnivoran mammals.

Form-function relationships in mammalian feeding systems are active topics of research in evolutionary biology. This is due principally to their fundamental importance for understanding dietary adaptations in extinct taxa and macro-evolutionary patterns of morphological transformations through changing environments. We hypothesize that three-dimensional dental topographic metrics represent stronger predictors for dietary and other ecological variables than do linear measurements. To test this hypothesis, we measured three dental topographic metrics: Relief Index (RFI), Dirichlet Normal Energy (DNE), and Orientation Patch Count Rotated (OPCR) in 57 extant carnivoran species. Premolar and molar dental topographic indices were regressed against activity, diet breadth, habitat breadth, terrestriality, and trophic level variables within a phylogenetic framework. The results of this study showed significant correlations between RFI and the ecological variables diet breadth and trophic level. Weaker correlations are documented between OPCR and activity and between DNE and trophic level. Our results suggest that cusp height is strongly reflective of dietary ecology in carnivorans as a whole, and represents a proxy mainly for different degrees of hypercarnivory observed within this group of predatory mammals.

Dental topography of the Oligocene anthropoids Aegyptopithecus zeuxis and Apidium phiomense: Paleodietary insights from analysis of wear series.

Fossil primate dietary inference is enhanced when ascertained through multiple, distinct proxies. Dental topography can be used to assess changes in occlusal morphology with macrowear, providing insight on tooth use and function across the lifespans of individuals. We measured convex Dirichlet normal energy-a dental topography metric reflecting occlusal sharpness of features such as cusps and crests-in macrowear series of the second mandibular molars of two African anthropoid taxa from ∼30 Ma (Aegyptopithecus zeuxis and Apidium phiomense). Wear was quantified via three proxies: occlusal dentine exposure, inverse relief index, and inverse occlusal relief. The same measurements were calculated on macrowear series of four extant platyrrhine taxa (Alouatta, Ateles, Plecturocebus, and Sapajus apella) to provide an analogical framework for dietary inference in the fossil taxa. We predicted that Ae. zeuxis and Ap. phiomense would show similar patterns in topographic change with wear to one another and to extant platyrrhine frugivores like Ateles and Plecturocebus. The fossil taxa have similar distributions of convex Dirichlet normal energy to one another, and high amounts of concave Dirichlet normal energy 'noise' in unworn molars-a pattern shared with extant hominids that may distort dietary interpretations. Inverse relief index was the most useful wear proxy for comparison among the taxa in this study which possess disparate enamel thicknesses. Contrary to expectations, Ae. zeuxis and Ap. phiomense both resemble S. apella in exhibiting an initial decline in convex Dirichlet normal energy followed by an increase at the latest stages of wear as measured by inverse relief index, lending support to previous suggestions that hard-object feeding played a role in their dietary ecology. Based on these results and previous analyses of molar shearing quotients, microwear, and enamel microstructure, we suggest that Ae. zeuxis had a pitheciine-like strategy of seed predation, whereas Ap. phiomense potentially consumed berry-like compound fruits with hard seeds.

New gliding mammaliaforms from the Jurassic.

Stem mammaliaforms are Mesozoic forerunners to mammals, and they offer critical evidence for the anatomical evolution and ecological diversification during the earliest mammalian history. Two new eleutherodonts from the Late Jurassic period have skin membranes and skeletal features that are adapted for gliding. Characteristics of their digits provide evidence of roosting behaviour, as in dermopterans and bats, and their feet have a calcaneal calcar to support the uropagatium as in bats. The new volant taxa are phylogenetically nested with arboreal eleutherodonts. Together, they show an evolutionary experimentation similar to the iterative evolutions of gliders within arboreal groups of marsupial and placental mammals. However, gliding eleutherodonts possess rigid interclavicle-clavicle structures, convergent to the avian furculum, and they retain shoulder girdle plesiomorphies of mammaliaforms and monotremes. Forelimb mobility required by gliding occurs at the acromion-clavicle and glenohumeral joints, is different from and convergent to the shoulder mobility at the pivotal clavicle-sternal joint in marsupial and placental gliders.

Periapical Lesions and Missed Canals in Endodontically Treated Teeth: A Cone-Beam Computed Tomographic Study of a Chinese Subpopulation.

BACKGROUND Periapical lesions (PL) are a common complication of endodontically treated teeth (ETT), which can result from a missed canal (MC). This study aimed to assess the prevalence of PL and MC in the ETT of a Chinese subpopulation and investigate potential associations between them. MATERIAL AND METHODS A total of 561 cone-beam computed tomography images were selected and analyzed. A total of 1024 endodontically treated posterior teeth excluding third molars were evaluated for the presence of PL and MC. The chi-square test or Fisher's exact test, as well as the odds ratio test, were used to determine whether there was an association and risk relationship between the incidence of PL and the occurrence of MC. RESULTS The overall prevalence of PL and MC in ETT was 56.1% and 19.0%, respectively. In endodontically treated molars, the incidence of PL and MC was 64.1% and 27.6%, whereas in premolars, it was 42.1% and 4.27%. The maxillary first molar showed the highest frequency of PL (71.5%) and MC (65.7%), with the mesiobuccal second canal being the most missed (78.8%). Teeth with an MC were found to be 3.658 times (95% confidence interval=2.541-5.301, P<0.0001) more likely to be associated with a PL. CONCLUSIONS Endodontically treated teeth with missed canals are associated with higher risks of periapical lesions. The high prevalence of these complications in a Chinese subpopulation underscores the importance of implementing enhanced diagnostic and treatment methods for root canal treatment or retreatment.

Age-related changes in the morphology of the root canal system of mandibular first molars: a micro-CT study.

OBJECTIVE: This study aimed to evaluate changes on root canal morphology in patients with different ages using micro-CT technology. MATERIALS AND METHODS: Mandibular first molars (n = 150) were scanned at a pixel size of 13.68 µm, categorized into 3 groups according to patient's age and analyzed regarding configuration, orifices, apical foramina, root length, canal volume, and surface area. Morphological 2D and 3D parameters were evaluated in distal roots with Type I configuration (n = 109) as well as the morphology of isthmuses Types I and III in 68 mesial roots. One-way ANOVA post hoc Tukey and Kruskal-Wallis tests were used for statistical analyses (α = 5%). RESULTS: A great variation in the canal configuration was found. No difference was observed in roots' length (p > 0.05). Canal volume reduced with age (p < 0.05), while surface area increased (p < 0.05) in patients ≤ 30 years. There was no difference in canal/root length, area, and from foramen to the apex in distal roots with Type I configuration (p > 0.05), but 2D and 3D parameters significantly decreased with age (p < 0.05). Overall, the diameter of the isthmuses' roof reduced with age (p < 0.05). In patients ≥ 31 years with Type III isthmus the distance from the isthmus floor to the foramen of the mesiolingual canal also decreased (p < 0.05). CONCLUSION: Overall, the internal morphology of the mesial roots of mandibular first molars was more affected by aging than distal canals. The most relevant tested parameter that significantly reduced in both roots was the volume of the root canal systems. CLINICAL RELEVANCE: A detailed evaluation of fine anatomical aspects of the root canal system of mandibular first molars of patients with different ages showed that the internal morphology of mesial roots is more affected by aging than distal canals.

Microcomputed tomography analysis of the radicular residual dentin thickness in mandibular second molars after virtual fiber post placement: Identification of danger zones.

STATEMENT OF PROBLEM: Mandibular second molars have variable root, pulp chamber floor, and radicular groove morphologies, potentially affecting residual dentin thickness and post placement suitability. However, an identification of the danger zones is lacking. PURPOSE: The purpose of this in vitro study was to investigate the residual dentin thickness in the danger zone of mandibular second molars after virtual fiber post placement by using a simulation method based on microcomputed tomography (µCT). MATERIAL AND METHODS: A total of 84 extracted mandibular second molars were scanned using µCT and classified according to root morphology (separate or fused) and pulp chamber floor morphologies (C-shaped, non-C-shaped, or no pulp chamber floor). Fused-root mandibular second molars were further classified based on the radicular groove type (V-, U-, or Ω-shaped). All specimens were accessed, instrumented, and rescanned with µCT. Two types of commercial fiber posts were also scanned. Clinical fiber post placement was simulated in all prepared canals by using a multifunctional software program. The minimum residual dentin thickness of each root canal was measured and analyzed by using nonparametric tests to identify the danger zone. Perforation rates were calculated and recorded. RESULTS: Larger fiber posts decreased minimum residual dentin thickness (P<.05) and increased perforation rate. In regard to mandibular second molars with separate roots, the distal root canal exhibited a significantly higher minimum residual dentin thickness than the mesiobuccal and mesiolingual root canals (P<.05). However, no significant difference in minimum residual dentin thickness was found between the different canals in fused-root mandibular second molars with C-shaped pulp chamber floors (P<.05). Fused-root mandibular second molars with Ω-shaped radicular grooves had a lower minimum residual dentin thickness than those with V-shaped radicular grooves (P<.05) and demonstrated the highest perforation rate. CONCLUSIONS: The morphologies of the root, pulp chamber floor, and radicular groove were correlated with residual dentin thickness distribution in mandibular second molars after fiber post placement. A comprehensive understanding of mandibular second molar morphology is essential for determining the suitability of post-and-core crown restorations after endodontic treatment.

Feasibility of mini-implant insertion between mesial and distal buccal roots of a maxillary first molar: A cone-beam computed tomography imaging study.

INTRODUCTION: Mini-implant insertion in the maxillary posterior region can be influenced by anatomic limitations, thus increasing the failure rate. We explored the feasibility of a new implantation site: the region between the mesial and distal buccal roots of the maxillary first molar. METHODS: Cone-beam computed tomography data from 177 patients were collected from a database. The maxillary first molars were morphologically classified by analyzing the angle and morphology of the mesial and distal buccal roots. Next, 77 subjects were randomly selected from the 177 patients to measure and analyze the hard-tissue morphology in the maxillary posterior region. RESULTS: We devised the Morphological Classification on the Mesial and Distal Buccal Roots of Maxillary First Molar (MCBRMM), divided into 3 types: MCBRMM-I, II, and III. In all subjects, MCBRMM-I, II, and III accounted for 43%, 25%, and 32%, respectively. At 8 mm from the mesial cementoenamel junction of maxillary first molars, the interradicular distance between the maxillary first molar's mesiodistal buccal roots of MCBRMM-I was 2.6 mm, showing an upward trend from the cementoenamel junction to the apex. The distance from the buccal bone cortex to the palatal root was >9 mm. The buccal cortical thickness was >1 mm. CONCLUSIONS: This study provided a potential site for mini-implant insertion in the maxillary posterior region: the alveolar bone of maxillary first molars in MCBRMM-I.

Anatomy of the greater palatine foramen and canal and their clinical significance in relation to the greater palatine artery: a systematic review and meta-analysis.

PURPOSE: Accurate knowledge of greater palatine foramen (GPF) and greater palatine canal (GPC) anatomy is necessary to avoid injury to the greater palatine artery (GPA) when performing a variety of anesthesiologic, dental or surgical procedures. The aim of this paper was to perform a systematic review and meta-analysis of literature on the anatomy and localization of bony structures associated with the GPA, namely the GPF and GPC. METHODS: A systematic literature search was performed using PubMed, Embase, ScienceDirect, and Web of Science databases. Seventy-five studies were included in the meta-analysis (n = 22,202 subjects). RESULTS: The meta-analysis showed that the GPF is positioned 17.21 mm (95% CI = 16.34-18.09 mm) from the posterior nasal spine, 2.56 mm (95% CI = 1.90-3.22 mm) from the posterior border of the hard palate, 46.24 mm (95% CI = 44.30-48.18 mm) from the anterior nasal spine, 15.22 mm (95% CI = 15.00-15.43 mm) from the midline maxillary suture, 37.32 mm (95% CI = 36.19-38.45 mm) from the incisive foramen, and opposite the third maxillary molar (M3) in 64.9% (58.7-70.7%) of the total population. CONCLUSION: An up-to-date, comprehensive analysis of GPF and GPC clinical anatomy is presented. The results from this evidence-based anatomical study provides a unified set of data to aid clinicians in their practice.

Morphology of the greater palatine foramen: a clinical point of view.

PURPOSE: Anatomical characteristics of the greater palatine foramen (GPF) are essential during the greater palatine nerve block application to anesthetize maxillary teeth, gums, midface, and nasal cavities. The position of GPF is usually described in relation to adjacent anatomical structures. This investigation aims to examine the morphometric relationships of GPF and closely determine its position. METHODS: The study included 87 skulls (174 foramina). They were photographed in a horizontal position with bases facing up. The digital data were processed in the ImageJ 1.53n software. RESULTS: The average distance of the GPF from the median palatine suture was 15.94 mm. In relation to the posterior border of the bony palate, the distance was 2.05 mm. Statistical significance was found in comparing the angle between the GPF, incisive fossa, and the median palatine suture between the sides of the skulls (p = 0.02). Comparing tested parameters between males and females showed significant differences in GPF-MPS (p = 0.003) and GPF-pb (p = 0.012), with lower values in females. The most significant percentage of skulls (77.01%) had the GPF located at the level of the third molar. The most significant number of bony palates had one lesser opening (60.91%) on the left side. CONCLUSION: GPF is located at the level of the maxillary third molar in most of the examined palates. Knowledge of the anatomical position of the greater palatine foramen and its variations is the basis for successfully implementing anesthesia and various surgical interventions.

Characterizations of three-dimensional root morphology and topological location of mandibular third molars by cone-beam computed tomography.

PURPOSE: This study aimed to delineate three-dimensional (3D) root morphology and topological locations of mandibular third molars (MTMs) by cone-beam computed tomography (CBCT) in a Chinese adult dental population. METHODS: Adult patients with MTMs were retrospectively screened based on CBCT images at our institution between January 2018 and December 2019. Root morphology and spatial locations of these teeth were defined based on CBCT 3D images. Potential associations with epidemiological and clinical/radiological parameters were analyzed using Chi-square or Fisher exact test. Two-tailed P values less than 0.05 were considered statistically significant. RESULTS: A total number of 2680 eligible patients (male/female:0.74; 35 ± 10 years old) with 4180 MTMs were enrolled. The majority of MTMs had 2 roots 3064 (73.30%), followed by 800 (19.14%) 1 root, 302 (7.22%) 3 roots, and 14 (0.33%) 4 roots. More than half of one-rooted MTMs were convergent, followed by club-shaped and C-shaped. Among MTMs with 2 roots, 2860 (93.34%) were M-D (mesio-distal) types. Most MTMs with 3 roots were M-2D (one root in mesial, two roots in distal) types, followed by 2M-D (two roots in mesial, one root in distal) types, and B-2L (one root in buccal, two roots in lingual) types. The presence of root configurations was significantly associated with the angulation, depth, and width classification in two-rooted MTMs (P < 0.05). CONCLUSIONS: Although the morphology and spatial locations of MTMs vary greatly, our results from a large dental population reconfirm that most MTMs have two roots with mesial-distal type of spatial distribution.

Conservative management of double teeth in molar teeth with pulp or periapical disease: a report of five cases and literature review.

BACKGROUND: Double teeth are usually the result of an abnormality in the developing tooth germ. Double teeth can occur in either the primary or permanent dentition, with the majority of cases concerning permanent teeth reported in the anterior teeth and less frequently in the molar teeth. CASE PRESENTATION: This report illustrates five cases of double teeth in molars with pulp and periapical disease, including one case of geminated teeth and four cases of fused teeth. Radiographic findings revealed the presence of extra teeth on the buccal aspect of the molar in five cases, with or without communication between the two root canal systems. Root canal treatment was performed by using CBCT and a dental operating microscope. The treatment outcome was good in all five cases. CONCLUSION: The diagnosis and treatment of double teeth requires special attention. The root canal system should be carefully explored to obtain a full understanding of the anatomy, allowing it to be fully cleaned and obturated. Proper anatomical structure analysis prior to treatment facilitates the development of an appropriate treatment plan, thereby increasing the likelihood of successful treatment both aesthetically and functionally.