An Overview of Microcrystal Electron Diffraction (MicroED).

The bedrock of drug discovery and a key tool for understanding cellular function and drug mechanisms of action is the structure determination of chemical compounds, peptides, and proteins. The development of new structure characterization tools, particularly those that fill critical gaps in existing methods, presents important steps forward for structural biology and drug discovery. The emergence of microcrystal electron diffraction (MicroED) expands the application of cryo-electron microscopy to include samples ranging from small molecules and membrane proteins to even large protein complexes using crystals that are one-billionth the size of those required for X-ray crystallography. This review outlines the conception, achievements, and exciting future trajectories for MicroED, an important addition to the existing biophysical toolkit.

Software tools for automated transmission electron microscopy.

The demand for high-throughput data collection in electron microscopy is increasing for applications in structural and cellular biology. Here we present a combination of software tools that enable automated acquisition guided by image analysis for a variety of transmission electron microscopy acquisition schemes. SerialEM controls microscopes and detectors and can trigger automated tasks at multiple positions with high flexibility. Py-EM interfaces with SerialEM to enact specimen-specific image-analysis pipelines that enable feedback microscopy. As example applications, we demonstrate dose reduction in cryo-electron microscopy experiments, fully automated acquisition of every cell in a plastic section and automated targeting on serial sections for 3D volume imaging across multiple grids.

Systemic sclerosis-associated myositis features minimal inflammation and characteristic capillary pathology.

Systemic sclerosis represents a chronic connective tissue disease featuring fibrosis, vasculopathy and autoimmunity, affecting skin, multiple internal organs, and skeletal muscles. The vasculopathy is considered obliterative, but its pathogenesis is still poorly understood. This may partially be due to limitations of conventional transmission electron microscopy previously being conducted only in single patients. The aim of our study was therefore to precisely characterize immune inflammatory features and capillary morphology of systemic sclerosis patients suffering from muscle weakness. In this study, we identified 18 individuals who underwent muscle biopsy because of muscle weakness and myalgia in a cohort of 367 systemic sclerosis patients. We performed detailed conventional and immunohistochemical analysis and large-scale electron microscopy by digitizing entire sections for in-depth ultrastructural analysis. Muscle biopsies of 12 of these 18 patients (67%) presented minimal features of myositis but clear capillary alteration, which we termed minimal myositis with capillary pathology (MMCP). Our study provides novel findings in systemic sclerosis-associated myositis. First, we identified a characteristic and specific morphological pattern termed MMCP in 67% of the cases, while the other 33% feature alterations characteristic of other overlap syndromes. This is also reflected by a relatively homogeneous clinical picture among MMCP patients. They have milder disease with little muscle weakness and a low prevalence of interstitial lung disease (20%) and diffuse skin involvement (10%) and no cases of either pulmonary arterial hypertension or renal crisis. Second, large-scale electron microscopy, introducing a new level of precision in ultrastructural analysis, revealed a characteristic capillary morphology with basement membrane thickening and reduplications, endothelial activation and pericyte proliferation. We provide open-access pan-and-zoom analysis to our datasets, enabling critical discussion and data mining. We clearly highlight characteristic capillary pathology in skeletal muscles of systemic sclerosis patients.

Understanding pre-mRNA splicing through crystallography.

Crystallography is a powerful tool to determine the atomic structures of proteins and RNAs. X-ray crystallography has been used to determine the structure of many splicing related proteins and RNAs, making major contributions to our understanding of the molecular mechanism and regulation of pre-mRNA splicing. Compared to other structural methods, crystallography has its own advantage in the high-resolution structural information it can provide and the unique biological questions it can answer. In addition, two new crystallographic methods - the serial femtosecond crystallography and 3D electron crystallography - were developed to overcome some of the limitations of traditional X-ray crystallography and broaden the range of biological problems that crystallography can solve. This review discusses the theoretical basis, instrument requirements, troubleshooting, and exciting potential of these crystallographic methods to further our understanding of pre-mRNA splicing, a critical event in gene expression of all eukaryotes.

New Insights on the Structure of Electrochemically Deposited Lithium Metal and Its Solid Electrolyte Interphases via Cryogenic TEM.

Lithium metal has been considered the "holy grail" anode material for rechargeable batteries despite the fact that its dendritic growth and low Coulombic efficiency (CE) have crippled its practical use for decades. Its high chemical reactivity and low stability make it difficult to explore the intrinsic chemical and physical properties of the electrochemically deposited lithium (EDLi) and its accompanying solid electrolyte interphase (SEI). To prevent the dendritic growth and enhance the electrochemical reversibility, it is crucial to understand the nano- and mesostructures of EDLi. However, Li metal is very sensitive to beam damage and has low contrast for commonly used characterization techniques such as electron microscopy. Inspired by biological imaging techniques, this work demonstrates the power of cryogenic (cryo)-electron microscopy to reveal the detailed structure of EDLi and the SEI composition at the nanoscale while minimizing beam damage during imaging. Surprisingly, the results show that the nucleation-dominated EDLi (5 min at 0.5 mA cm-2) is amorphous, while there is some crystalline LiF present in the SEI. The EDLi grown from various electrolytes with different additives exhibits distinctive surface properties. Consequently, these results highlight the importance of the SEI and its relationship with the CE. Our findings not only illustrate the capabilities of cryogenic microscopy for beam (thermal)-sensitive materials but also yield crucial structural information on the EDLi evolution with and without electrolyte additives.

The ultrastructure of bone as revealed in electron microscopy of ion-milled sections.

Mineral makes up more than half the volume of bone, but its spatial and structural relationship to collagen and other proteins is still a matter of debate. Due to the nanometer-size of bone crystals this matter can be resolved only with transmission electron microscope (TEM) images. Using sections cut with an ultramicrotome, previous investigators determined most mineral lies in the 40nm wide gap zone in collagen fibrils. Using less invasive sectioning methods (ion milling and focused ion beam [FIB]) reveals that most mineral is extrafibrillar, occurring in the form of mineral lamellae, polycrystalline plates 300nm or more long, packed around collagen fibrils in stacks of four or more lamellae <1nm apart. While Ca and P also occur in the gap zone, they do not appear to be in the form of well-crystallized apatite. This new model for bone ultrastructure resolves outstanding problems presented by the previous model.

Real-time detection and single-pass minimization of TEM objective lens astigmatism.

Minimization of the astigmatism of the objective lens is a critical daily instrument alignment task essential for high resolution TEM imaging. Fast and sensitive detection of astigmatism is needed to provide real-time feedback and adjust the stigmators to efficiently reduce astigmatism. Currently the method used by many microscopists is to visually examine the roundness of a diffractogram (Thon rings) and iteratively adjust the stigmators to make the Thon rings circular. This subjective method is limited by poor sensitivity and potentially biased by the astigmatism of human eyes. In this study, an s2 power spectra based method, s2stigmator, was developed to allow fast and sensitive detection of the astigmatism in TEM live images. The "radar"-style display provides real-time feedback to guide the adjustment of the objective lens stigmators. Such unique capability allowed us to discover the mapping of the two stigmators to the astigmatism amplitude and angle, which led us to develop a single-pass tuning strategy capable of significantly quicker minimization of the objective lens astigmatism.

Subtomogram analysis using the Volta phase plate.

Cryo-electron tomography (CET) and subtomogram analysis allow studying the structures of macromolecular complexes in their natural context. The radiation sensitivity of vitrified biological specimens and the resulting low signal-to-noise ratio (SNR) in CET limit the amount of structural information that can be mined from tomographic data. The Volta phase plate (VPP) has emerged as an effective means to increase the SNR and hence contrast compared to 'conventional' defocus-based phase contrast transmission electron microscopy (CTEM). Here, we assess the performance of the VPP compared to CTEM in subtomogram analysis, using the mammalian 80S ribosome as a test case. Accurate focusing is the major factor for achieving high resolution with the VPP, as highlighted by a comparison of slightly different focusing strategies. From only 1400 subtomograms, the VPP yields a subtomogram average of the mammalian 80S ribosome at 9.6Å resolution without laborious contrast transfer function (CTF) correction. The subtomogram averages obtained using CTEM approaches are comparable, but suffer from lower signal transfer in certain frequency bands due to the oscillations of the CTF. Our study demonstrates that the VPP is a valuable tool for subtomogram analysis, because it enables improved performance and efficiency in terms of structure localization and number of subtomograms required for a given resolution.

Transmission electron microscopy artifacts in characterization of the nanomaterial-cell interactions.

We investigated transmission electron microscopy artifacts obtained using standard sample preparation protocols applied to the investigation of Escherichia coli cells exposed to common nanomaterials, such as TiO2, Ag, ZnO, and MgO. While the common protocols for some nanomaterials result only in known issues of nanomaterial-independent generation of anomalous deposits due to fixation and staining, for others, there are reactions between the nanomaterial and chemicals used for post-fixation or staining. Only in the case of TiO2 do we observe only the known issues of nanomaterial-independent generation of anomalous deposits due to exceptional chemical stability of this material. For the other three nanomaterials, different artifacts are observed. For each of those, we identify causes of the observed problems and suggest alternative sample preparation protocols to avoid artifacts arising from the sample preparation, which is essential for correct interpretation of the obtained images and drawing correct conclusions on cell-nanomaterial interactions. Finally, we propose modified sample preparation and characterization protocols for comprehensive and conclusive investigations of nanomaterial-cell interactions using electron microscopy and for obtaining clear and unambiguous revelation whether the nanomaterials studied penetrate the cells or accumulate at the cell membranes. In only the case of MgO and ZnO, the unambiguous presence of Zn and Mg could be observed inside the cells.

Interfacing Microfluidics with Negative Stain Transmission Electron Microscopy.

A microfluidic platform is presented for preparing negatively stained grids for use in transmission electron microscopy (EM). The microfluidic device is composed of glass etched with readily fabricated features that facilitate the extraction of the grid poststaining and maintains the integrity of the sample. Utilization of this device simultaneously reduced environmental contamination on the grids and improved the homogeneity of the heavy metal stain needed to enhance visualization of biological specimens as compared to conventionally prepared EM grids. This easy-to-use EM grid preparation device provides the basis for future developments of systems with more integrated features, which will allow for high-throughput and dynamic structural biology studies.

Nonfouling NTA-PEG-Based TEM Grid Coatings for Selective Capture of Histidine-Tagged Protein Targets from Cell Lysates.

We report the preparation and performance of TEM grids bearing stabilized nonfouling lipid monolayer coatings. These films contain NTA capture ligands of controllable areal density at the distal end of a flexible poly(ethylene glycol) 2000 (PEG2000) spacer to avoid preferred orientation of surface-bound histidine-tagged (His-tag) protein targets. Langmuir-Schaefer deposition at 30 mN/m of mixed monolayers containing two novel synthetic lipids-1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[(5-amido-1-carboxypentyl)iminodiacetic acid]polyethylene glycolamide 2000) (NTA-PEG2000-DSPE) and 1,2-(tricosa-10',12'-diynoyl)-sn-glycero-3-phosphoethanolamine-N-(methoxypolyethylene glycolamide 350) (mPEG350-DTPE)-in 1:99 and 5:95 molar ratios prior to treatment with a 5 min, 254 nm light exposure was used for grid fabrication. These conditions were designed to limit nonspecific protein adsorption onto the stabilized lipid coating by favoring the formation of a mPEG350 brush layer below a flexible, mushroom conformation of NTA-PEG2000 at low surface density to enable specific immobilization and random orientation of the protein target on the EM grid. These grids were then used to capture His6-T7 bacteriophage and RplL from cell lysates, as well as purified His8-green fluorescent protein (GFP) and nanodisc solubilized maltose transporter, His6-MalFGK2. Our findings indicate that TEM grid supported, polymerized NTA lipid monolayers are capable of capturing His-tag protein targets in a manner that controls their areal densities, while efficiently blocking nonspecific adsorption and limiting film degradation, even upon prolonged detergent exposure.

Diffractive microscopy in dermatopathology.

Diffraction is the process by which a beam of light is spread out as a result of passing through a narrow aperture or across an edge. Light diffraction can be produced by closing the aperture diaphragm beyond the recommended setting, by flipping the condenser cone down, or by using an opaque object such as the microscopist's hand to block the column of light and force it to bend around the edge. Any of these techniques results in greater refractility of objects in the path of the light. We studied 77 biopsy specimens from a variety of conditions selected to compare the value of diffractive microscopy, and found that it worked best in the evaluation of alopecia, tumor stroma, hemosiderin, argyria and imipramine pigmentation. In amyloidosis stained with Congo red and silica granuloma, polarized microscopy was superior to diffraction microscopy, and neither diffractive microscopy nor polarized microscopy was superior to routine light microscopy in the evaluation of melanin, chrysiasis or ochronosis.

Direct Observation of Wet Biological Samples by Graphene Liquid Cell Transmission Electron Microscopy.

Recent development of liquid phase transmission electron microscopy (TEM) enables the study of specimens in wet ambient conditions within a liquid cell; however, direct structural observation of biological samples in their native solution using TEM is challenging since low-mass biomaterials embedded in a thick liquid layer of the host cell demonstrate low contrast. Furthermore, the integrity of delicate wet samples is easily compromised during typical sample preparation and TEM imaging. To overcome these limitations, we introduce a graphene liquid cell (GLC) using multilayer graphene sheets to reliably encapsulate and preserve biological samples in a liquid for TEM observation. We achieve nanometer scale spatial resolution with high contrast using low-dose TEM at room temperature, and we use the GLC to directly observe the structure of influenza viruses in their native buffer solution at room temperature. The GLC is further extended to investigate whole cells in wet conditions using TEM. We also demonstrate the potential of the GLC for correlative studies by TEM and fluorescence light microscopy imaging.

Real-time visualization of nanoparticles interacting with glioblastoma stem cells.

Nanoparticle-based therapy represents a novel and promising approach to treat glioblastoma, the most common and lethal malignant brain cancer. Although similar therapies have achieved significant cytotoxicity in cultured glioblastoma or glioblastoma stem cells (GSCs), the lack of an appropriate approach to monitor interactions between cells and nanoparticle-based therapies impedes their further clinical application in human patients. To address this critical issue, we first obtained NOTCH1 positive GSCs from patient-derived primary cultures. We then developed a new imaging approach to directly observe the dynamic nature of nanoparticles at the molecular level using in situ transmission electron microscopy (TEM). Utilizing these tools we were able to visualize real-time movements of nanoparticles interacting with GSCs for the first time. Overall, we show strong proof-of-concept results that real-time visualization of nanoparticles in single cells can be achieved at the nanoscale using TEM, thereby providing a powerful platform for the development of nanotherapeutics.

Elastic volume reconstruction from series of ultra-thin microscopy sections.

Anatomy of large biological specimens is often reconstructed from serially sectioned volumes imaged by high-resolution microscopy. We developed a method to reassemble a continuous volume from such large section series that explicitly minimizes artificial deformation by applying a global elastic constraint. We demonstrate our method on a series of transmission electron microscopy sections covering the entire 558-cell Caenorhabditis elegans embryo and a segment of the Drosophila melanogaster larval ventral nerve cord.

Improved Zernike-type phase contrast for transmission electron microscopy.

Zernike phase contrast has been recognized as a means of recording high-resolution images with high contrast using a transmission electron microscope. This imaging mode can be used to image typical phase objects such as unstained biological molecules or cryosections of biological tissue. According to the original proposal discussed in Danev and Nagayama (2001) and references therein, the Zernike phase plate applies a phase shift of π/2 to all scattered electron beams outside a given scattering angle and an image is recorded at Gaussian focus or slight underfocus (below Scherzer defocus). Alternatively, a phase shift of -π/2 is applied to the central beam using the Boersch phase plate. The resulting image will have an almost perfect contrast transfer function (close to 1) from a given lowest spatial frequency up to a maximum resolution determined by the wave length, the amount of defocus and the spherical aberration of the microscope. In this paper, I present theory and simulations showing that this maximum spatial frequency can be increased considerably without loss of contrast by using a Zernike or Boersch phase plate that leads to a phase shift between scattered and unscattered electrons of only π /4, and recording images at Scherzer defocus. The maximum resolution can be improved even more by imaging at extended Scherzer defocus, though at the cost of contrast loss at lower spatial frequencies.

A General Technique to Investigate the Aggregation of Nanoparticles by Transmission Electron Microscopy.

The aggregation state of nanoparticles (NPs) must be precisely known in order to study the structure-property relationship and to evaluate the exploitability of NPs dispersion for a given application. Here we report a general technique for sample preparation to investigate with transmission electron microscopy (TEM) the state of aggregation of NPs dispersed in liquid solution. Following a simple procedure which requires few minutes, the aggregates of NPs are "frozen" in a polymeric matrix simultaneously to their deposition on a TEM grid. Our technique is of general applicability and it avoids the use of cryo-TEM, which is more expensive, more time consuming and less common than ordinary TEM. Compared to the investigation of NPs aggregation in the liquid phase with dynamic light scattering, our approach avoids the problem of shielding by large aggregates and it allows the full exploitation of TEM advantages, primarily the reliable determination of shape and size of each aggregate and the precise evaluation of the number of single NPs forming each cluster. As an example, we demonstrate the use of our technique to study two frequent topics related to aggregation: the plasmon properties of gold NPs aggregates and the stability of iron oxide NPs in physiological environment. The methodology described here will be useful to advance the knowledge about how aggregation influences the physical-chemical properties of NPs.

Practical workflow for cryo focused-ion-beam milling of tissues and cells for cryo-TEM tomography.

Vitreous freezing offers a way to study cells and tissue in a near-native state by cryo-transmission electron microscopy (cryo-TEM), which is important when structural information at the macromolecular level is required. Many cells - especially those in tissue - are too thick to study intact in the cryo-TEM. Cryo focused-ion-beam (cryo-FIB) milling is being used in a few laboratories to thin vitreously frozen specimens, thus avoiding the artifacts and difficulties of cryo-ultramicrotomy. However, the technique is challenging because of the need to avoid devitrification and frost accumulation during the entire process, from the initial step of freezing to the final step of loading the specimen into the cryo-TEM. We present a robust workflow that makes use of custom fixtures and devices that can be used for high-pressure-frozen bulk tissue samples as well as for samples frozen on TEM grids.

In-focus electrostatic Zach phase plate imaging for transmission electron microscopy with tunable phase contrast of frozen hydrated biological samples.

Transmission electron microscopy (TEM) images of beam sensitive weak-phase objects such as biological cryo samples usually show a very low signal-to-noise ratio. These samples have almost no amplitude contrast and instead structural information is mainly encoded in the phase contrast. To increase the sample contrast in the image, especially for low spatial frequencies, the use of phase plates for close to focus phase contrast enhancement in TEM has long been discussed. Electrostatic phase plates are favorable in particular, as their tunable potential will allow an optimal phase shift adjustment and higher resolution than film phase plates as they avoid additional scattering events in matter. Here we show the first realization of close to focus phase contrast images of actin filament cryo samples acquired using an electrostatic Zach phase plate. Both positive and negative phase contrast is shown, which is obtained by applying appropriate potentials to the phase plate. The dependence of phase contrast improvement on sample orientation with respect to the phase plate is demonstrated and single-sideband artifacts are discussed. Additionally, possibilities to reduce contamination and charging effects of the phase plate are shown.

Quantitative characterization of electron detectors for transmission electron microscopy.

A new generation of direct electron detectors for transmission electron microscopy (TEM) promises significant improvement over previous detectors in terms of their modulation transfer function (MTF) and detective quantum efficiency (DQE). However, the performance of these new detectors needs to be carefully monitored in order to optimize imaging conditions and check for degradation over time. We have developed an easy-to-use software tool, FindDQE, to measure MTF and DQE of electron detectors using images of a microscope's built-in beam stop. Using this software, we have determined the DQE curves of four direct electron detectors currently available: the Gatan K2 Summit, the FEI Falcon I and II, and the Direct Electron DE-12, under a variety of total dose and dose rate conditions. We have additionally measured the curves for the Gatan US4000 and TVIPS TemCam-F416 scintillator-based cameras. We compare the results from our new method with published curves.