A comprehensive review of toxicity of coal fly ash and its leachate in the ecosystem.

Coal fly ash (CFA), a byproduct of coal combustion, is a hazardous industrial solid waste. Its excessive global production, coupled with improper disposal practices, insufficient utilization and limited awareness of its inherent hazards, poses a significant threat to both ecological environment and human health. Based on the physicochemical properties of CFA and its leachates, we elucidate the forms of CFA and potential pathways for its entry into the human body, as well as the leaching behavior, maximum tolerance and biological half-life of toxic elements present in CFA. Furthermore, we provide an overview of current strategies and methods for mitigating the leaching of these harmful elements from CFA. Moreover, we systemically summarize toxic effect of CFA on organisms across various tiers of complexity, analyze epidemiological findings concerning the human health implications resulting from CFA exposure, and delve into the biotoxicological mechanisms of CFA and its leachates at cellular and molecular levels. This review aims to enhance understanding of the potential toxicity of CFA, thereby promoting increased public awareness regarding the disposal and management of this industrial waste.

The Influence of the Material Structure on the Mechanical Properties of Geopolymer Composites Reinforced with Short Fibers Obtained with Additive Technologies.

Additive manufacturing technologies have a lot of potential advantages for construction application, including increasing geometrical construction flexibility, reducing labor costs, and improving efficiency and safety, and they are in line with the sustainable development policy. However, the full exploitation of additive manufacturing technology for ceramic materials is currently limited. A promising solution in these ranges seems to be geopolymers reinforced by short fibers, but their application requires a better understanding of the behavior of this group of materials. The main objective of the article is to investigate the influence of the microstructure of the material on the mechanical properties of the two types of geopolymer composites (flax and carbon-reinforced) and to compare two methods of production of geopolymer composites (casting and 3D printing). As raw material for the matrix, fly ash from the Skawina coal power plant (located at: Skawina, Lesser Poland, Poland) was used. The provided research includes mechanical properties, microstructure investigations with the use of scanning electron microscope (SEM), confocal microscopy, and atomic force microscope (AFM), chemical and mineralogical (XRD-X-ray diffraction, and XRF-X-ray fluorescence), analysis of bonding in the materials (FT-IR), and nuclear magnetic resonance spectroscopy analysis (NMR). The best mechanical properties were reached for the sample made by simulating 3D printing process for the composite reinforced by flax fibers (48.7 MPa for the compressive strength and 9.4 MPa for flexural strength). The FT-IR, XRF and XRD results show similar composition of all investigated materials. NMR confirms the presence of SiO4 and AlO4 tetrahedrons in a three-dimensional structure that is crucial for geopolymer structure. The microscopy observations show a better coherence of the geopolymer made in additive technology to the reinforcement and equal fiber distribution for all investigated materials. The results show the samples made by the additive technology had comparable, or better, properties with those made by a traditional casting method.

Impact of long-term industrial contamination on the bacterial communities in urban river sediments.

BACKGROUND: The contamination of the aquatic environment of urban rivers with industrial wastewater has affected the abiotic conditions and biological activities of the trophic levels of the ecosystem, particularly sediments. However, most current research about microorganism in urban aquatic environments has focused on indicator bacteria related to feces and organic pollution. Meanwhile, they ignored the interactions among microorganisms. To deeply understand the impact of industrial contamination on microbial community, we study the bacterial community structure and diversity in river sediments under the influence of different types of industrial pollution by Illumina MiSeq high-throughput sequencing technology and conduct a more detailed analysis of microbial community structure through co-occurrence networks. RESULTS: The overall community composition and abundance of individual bacterial groups differed between samples. In addition, redundancy analysis indicated that the structure of the bacterial community in river sediments was influenced by a variety of environmental factors. TN, TP, TOC and metals (Cu, Zn and Cd) were the most important driving factors that determined the bacterial community in urban river sediments (P < 0.01). According to PICRUSt analysis, the bacterial communities in different locations had similar overall functional profiles. It is worth noting that the 15 functional genes related to xenobiotics biodegradation and metabolism were the most abundant in the same location. The non-random assembly patterns of bacterial composition in different types of industrially polluted sediments were determined by a co-occurrence network. Environmental conditions resulting from different industrial pollutants may play an important role in determining their co-occurrence patterns of these bacterial taxa. Among them, the bacterial taxa involved in carbon and nitrogen cycles in module I were relatively abundant, and the bacterial taxa in module II were involved in the repair of metal pollution. CONCLUSIONS: Our data indicate that long-term potential interactions between different types of industrial pollution and taxa collectively affect the structure of the bacterial community in urban river sediments.

Microbial use for azo dye degradation-a strategy for dye bioremediation.

Azo dyes are aromatic compounds with one to many -N=N- groups as well as the leading class of synthetic dyes utilised in commercial solicitations. Azo dyes, released in the environment through textile effluents, have hazardous effects on the aquatic as well as human life. Their persistence and discharge into the environment are becoming a global concern; thus, the remediation of these contaminants has acquired great attention. The current review comprehensively discusses some of the main aspects of biodegradation of azo dyes. A variety of physicochemical approaches has already been utilised for treatment of textile effluents counting filtration, coagulation and chemical flocculation. Though these conventional techniques are effective, yet they are lavish and also comprise formation of concentrated sludge that makes a secondary disposal problem. In this regard, microbial usage is an effective, economical, bio-friendly and ecologically benign approach.

Impact assessment of bioaugmented tannery effluent discharge on the microbiota of water bodies.

Effluents are commonly discharged into water bodies, and in order for the process to be as environmentally sound as possible, the potential effects on native water communities must be assessed alongside the quality parameters of the effluents themselves. In the present work, changes in the bacterial diversity of streamwater receiving a tannery effluent were monitored by high-throughput MiSeq sequencing. Physico-chemical and microbiological parameters and acute toxicity were also evaluated through different bioassays. After the discharge of treated effluents that had been either naturally attenuated or bioaugmented, bacterial diversity decreased immediately in the streamwater samples, as evidenced by the over-representation of taxa such as Brachymonas, Arcobacter, Marinobacterium, Myroides, Paludibacter and Acinetobacter, typically found in tannery effluents. However, there were no remarkable changes in diversity over time (after 1 day). In terms of the physico-chemical and microbiological parameters analyzed, chemical oxygen demand and total bacterial count increased in response to discharge of the treated effluents. No lethal effects were observed in Lactuca sativa L. seeds or Rhinella arenarum embryos exposed to the streamwater that had received the treated effluents. All of these results contribute to the growing knowledge about the environmental safety of effluent discharge procedures.

Sawmill Activities Near the Lagos Lagoon, Nigeria: Polycyclic Aromatic Hydrocarbons and Embryotoxic Evaluations of Sediment Extracts Using Clarias gariepinus.

The physicochemical parameters and 16 priority PAHs in surface water, porewater and sediment at a sawmill wastes-impacted and High-Rise study sites on the Lagos lagoon in Nigeria were assessed. Further, the embryotoxic effects of sediment organic and porewater extracts from the study sites were evaluated in Clarias gariepinus (African sharptooth catfish) embryos for 26 h. High molecular weight PAHs dominated the PAHs profile especially in the sediment. Source apportionment of the PAHs in the three environmental matrices revealed mainly pyrogenic sources. Developmental abnormalities and decreased hatching success were observed in C. gariepinus embryos exposed to extracts from the Okobaba site compared to High-Rise study site. The results demonstrate the potential though non-significant ecological risk of sawmill activities near the lagoon on water quality and fisheries. Further studies are recommended to provide holistic evidence-based information to promote sustainable fisheries in the lagoon in support of the UN SDGs 13 (climate action) and 14 (life below water).

Assessment of the genotoxic potential of water courses impacted by wastewater treatment effluents using micronucleus assay in plants from the species Tradescantia.

Water pollution and the increase in genotoxic consequences in aquatic environments are well documented indicating the necessity and importance of biomonitoring programs. The objective of the present study was to determine the environmental quality of water resources and genotoxic potential of materials present within water samples obtained from the Perdizes River and the Mumbuca Stream, located in a region of discharge of wastewater treatment effluents using Tradescantia micronucleus assay (Trad - MCN). Water samples were collected from different locations up and downstream of the wastewater treatment plant during rainy season and subsequently submitted to physico-chemical analysis and Trad-MCN bioassay. The spatial distribution of the physico-chemical parameters assessed suggested that discharges of wastewater treatment effluents reduced water quality at all sites examined. Further, exposure to wastewater treatment effluents produced genotoxic effects on tetrads of Tradescantia pallida. These results reinforce the sensitivity of the Trad-MCN bioassay and its potential application in water quality monitoring programs concomitant with physicochemical evaluation.

Nucleolar alterations are reliable parameters to determine the cytogenotoxicity of environmental pollutants.

Pollution generated by deposition of industrial activity waste in the environment without due care can lead to serious environmental consequences. Bioassays in higher plants are means of understanding the cytogenotoxic effects of these substances. In the present work, Allium cepa L. was used as a model species to assess nucleolar changes induced by environmental pollutants. The substances used were Methyl Methane Sulfonate (MMS), cadmium (Cd), Spent Potliner (SPL) and the herbicide Atrazine. Water was used as a negative control. The silver-stained nucleolar organizer region (AgNOR) assay was used making it possible to evaluate how nucleolar parameters (number of nucleoli per nucleus and nucleoli area) behave when facing stress caused by such pollutants. The results obtained showed a variation in the observed parameters: an increase in the number of nucleoli in the treated cells and tendency to a reduction in nucleolar area, indicating that the tested pollutants may have impaired nucleolar activity. In addition, it was possible to establish a relationship between the behavior of the nucleolus with other changes as plantlet growth, cell proliferation, and DNA damage.

Assessing wild fish exposure to ligands for sex steroid receptors from pulp and paper mill effluents in the Biobio River Basin, Central Chile.

Bioactive substances in the Biobio River Basin in Chile were examined by deploying Semi Permeable Membrane Devices (SPMDs) upstream and downstream of 4 pulp mill effluent discharges. Androgenic and estrogenic activity of SPMD extracts were then evaluated using in vitro fish sex steroid receptor binding assays. The results indicated the occurrence of estrogenic type compounds associated with one of the mill discharges. A significant correlation among the presence of these compounds, an increase in gonadosomatic index GSI and induction of hepatic EROD activity of two native fish species was observed. However, no significant presence of mature oocytes in female gonads was detected. Although EROD induction was observed in sites impacted by mill effluents, an increase of its activity occurred towards the downstream areas, suggesting other non-mill sources. More research is needed to understand the environmental changes in context of the new technological improvements in treatment systems to MBBR (Moving Bed Biofilm Reactor) recently implemented by the pulp mill industries.

Toxicity of wine effluents and assessment of a depuration system for their control: assay with tadpoles of Rhinella arenarum (BUFONIDAE).

We evaluated the toxicity of the winery effluent and the efficiency of a symbiotic depuration system by means an experiment with Rhinella arenarum tadpoles. The studied effluent was taken from warehouses during the cleaning season. These effluents subsequently subjected to the purification treatment under evaluation. The effluent samples differentiated into two treatment levels: "raw" where the effluent was evaluated with field conditions and "treated" where the effluent was previously filtered with the symbiotic depuration system. The results of the bioassays compared with the physicochemical parameters determined in the effluent samples. The lethal response had a clear-cut correspondence with the effluent quality assessed utilizing physicochemical parameters. In all cases, dilution of the samples resulted in a significant reduction of their toxicity. It concluded that (a) winery effluents could be harmful to tadpoles of R. arenarum, (b) the symbiotic purification system used to treat wine effluents it would produce a significant reduction in the contaminant levels of the effluent. However, this reduction in contaminant levels does not provide sufficient safety for the release of the effluents into the environment.

[SENTIERI: Epidemiological Study of Residents in National Priority Contaminated Sites. Fifth Report]. / SENTIERI: Studio epidemiologico nazionale dei territori e degli insediamenti esposti a rischio da inquinamento. Quinto Rapporto.

INTRODUCTION AND OBJECTIVES: This volume provides an update of the health status of the populations living in the National Priority Contaminated Sites (NPCSs) included in the SENTIERI Project. This update is part of an epidemiological surveillance programme carried out in NPCSs, promoted by the Italian Ministry of Health as a further step of a project started in 2006, when the health status of residents in contaminated sites was first addressed within the National Strategic Program "Environment and Health". The Report focuses on five health outcomes: mortality, cancer incidence, hospital discharges, congenital anomalies, and children, adolescents and young adults' health. A key element of SENTIERI project is the a priori evaluation of the epidemiological evidence of a causal association between the considered cause of disease and the exposure. When an a priori evidence is identified, it is given a greater importance in the comment of the study findings. METHODS: The present update of the SENTIERI Project concerns 45 NPCSs including in all 319 Italian Municipalities (out of over 8,000 Municipalities), with an overall population of 5,900,000 inhabitants at the 2011 Italian Census. Standardized Mortality Ratios (SMRs) and Standardized Hospitalization Ratios (SHRs), referring to a time window of 2006-2013, were computed for all the 45 NPCSs, using as a reference the corresponding mortality and hospitalization rates of the Regions where each NCPS is located. Standardized Incidence Ratios (SIRs) were computed by the Italian Association of Cancer Registries (AIRTUM) for the 22 NPCSs served by a Cancer Registry. AIRTUM covers about 56% of Italy, with partly different time-windows. SIRs have been estimated using as reference population the 4 macroareas in which Italy is divided (North-West, North-East, Centre, South). Prevalence of congenital anomalies was computed for 15 NPCSs. RESULTS: An all-cause excess of 5,267 and 6,725 deaths was observed, respectively, in men and women; the cancer death excess was of 3,375 in men and 1,910 in women. It was estimated an excess of cancer incidence of 1,220 case in men and 1,425 in women over a five-year time window. With regard to the diseases with an a priori environmental aetiological validity, an excess for malignant mesothelioma, lung, colon, and gastric cancer, and for non-malignant respiratory diseases was observed. Cancer excess mainly affected NPCSs with presence of chemical and petrochemical plants, oil refineries, and dumping hazardous wastes. An excess of non-malignant respiratory disease was also detected in NPCSs in which steel industries and thermoelectric plants were present. An excess of mesothelioma was observed in NPCSs characterized by presence of asbestos and fluoro-edenite; it was also observed where the presence of asbestos was not reported in the legislative national decrees which define the NPCS areas. It is worth noting that, even if the presence of asbestos is not reported in many NPCSs legislative decrees, petrochemical plants and steel industries, for instance, are often characterized by the presence of a large amount of this mineral that, in the past, was extensively used as an insulating material. For the first time, the present Report includes a focus on the health status of children and adolescents (1,160,000 subjects, aged 0-19 years), and young adults (660,000 subjects, aged 20-29 years). Among infants (0-1 year), an excess of 7,000 hospitalizations was observed, 2,000 of which due to conditions of perinatal origin. In the age class 0-14, an excess of 22,000 hospitalizations for all causes was observed; 4,000 of them were due to acute respiratory diseases, and 2,000 to asthma. Data on cancer incidence for subjects aged 0-24 years were derived from general population cancer registries for twenty NPCSs, and from children cancer registries (age group: 0-19 years) for six NPCSs; 666 cases where diagnosed in the age group 0-24 years, corresponding to an excess of 9%. The main contributions to this excess are from soft tissue sarcomas in children (aged 0-14 years), acute myeloid leukaemia in children (aged 0-14 years) and in the age group 0-29 years, non-Hodgkin lymphoma and testicular cancer in young adults (aged 20-29 years). In seven out of 15 NPCSs, an excess prevalence rate of overall congenital anomalies at birth was observed. Congenital anomalies excesses included the following sites: genital organs, heart, limbs, nervous system, digestive system, and urinary system. CONCLUSIONS: The main findings of SENTIERI Project have been the detection of excesses for the diseases which showed an a priori epidemiological evidence of a causal association with the environmental exposures specific for each considered NPCS. These observations are valuable within public health, because they contribute to priority health promotion activities. Looking ahead, the health benefits of an improved environmental quality might be appreciated in terms of reduction of the occurrence of adverse health effects attributable to each Site major pollutant agents. Due to the methodological approach of the present study, it was not possible to adjust for several confounding factors reported to be risk factors for the studied diseases (e.g., smoking, alcohol consumption, obesity). Even if excesses of mortality, hospitalization, cancer incidence, and prevalence of congenital anomalies were found in several NPCSs, the study design and the multifactorial aetiology of the considered diseases do not permit, for all of them, to draw conclusions in terms of causal links with environmental contamination. Moreover, it must be taken into consideration that economic factors and the availability of health services may also play a relevant role in a diseases outcome. A few observations regarding some methodological limitations of SENTIERI Project should be made. There is not a uniform environmental characterisation of the studied NPCSs in term of quality and detection of the pollutants, because this information is present in different databases which at present are not adequately connected. Moreover, the recognition of a contaminated site as a National Priority Site is based on soil and groundwater pollution, and the available information on air quality is currently sparse and not homogenous. Another limitation, in term of statistical power, is the small population size of many NPCSs and the low frequency of several health outcomes. A special caution must be paid in data interpretation when considering the correspondence between the contaminated areas and the municipality boundaries, as they do not always coincide perfectly: in some cases, a small municipality with a large industrial site, while in other settings only a part of the municipality is exposed to the sources of pollution. Furthermore, all available health information systems are currently accessible at municipality level. The real breakthrough is essentially comprised of the development and fostering of a networking system involving all local health authorities and regional environmental protection agencies operating in the areas under study. The possibility to integrate the geographic approach of SENTIERI Project with a set of ad hoc analytic epidemiological investigations, such as residential cohort studies, case control studies, children health surveys, biomonitoring surveys, and with socioepidemiological studies, might greatly contribute to the identification of health priorities for environmental remediation activities. Finally, as discussed in the last section of the report, there is a need to adopt, in each NPCS, a two-way oriented communication plan involving public health authorities, scientific community, and resident population, taking into account that the history, the cultural frame and the network of relationships specific of each local context play a major role in the risk perception perspective.

Effects of effluent from electoplating industry on the immune response in the freshwater fish, Cyprinus carpio.

The present study was designed to assess the effect of sublethal concentrations of electoplating industry effluent (EIE) on the non-specific and specific immune responses in the freshwater fish, Cyprinus carpio. Sublethal concentrations of electroplating industry effluent such as 0.004, 0.007, 0.010 and 0.013% were chosen based on the LC50 values. Experimental fish were exposed to these sublethal concentrations of EIE for 28 days. After 7, 14, 21 and 28 days of treatment, non-specific immune response by serum lysozyme activity, myeloperoxidase activity and antiprotease activity and specific immune response by antibody response to Aeromonas hydrophila using bacterial agglutination assay and ELISA were assessed. The results showed that chronic exposure of fish to 0.004, 0.007, 0.010 and 0.013% EIE, dose-dependently decreased the non-specific and specific immune responses on all the days tested compared to control fish whereas statistically significant suppressive effects were observed in fish exposed to 0.013% of EIE on all activities tested.

Phytobeds with Fimbristylis dichotoma and Ammannia baccifera for treatment of real textile effluent: An in situ treatment, anatomical studies and toxicity evaluation.

Fimbristylis dichotoma, Ammannia baccifera and their co-plantation consortium FA independently degraded Methyl Orange, simulated dye mixture and real textile effluent. Wild plants of F. dichotoma and A. baccifera with equal biomass showed 91% and 89% decolorization of Methyl Orange within 60h at a concentration of 50ppm, while 95% dye removal was achieved by consortium FA within 48h. Floating phyto-beds with co-plantation (F. dichotoma and A. baccifera) for the treatment of real textile effluent in a constructed wetland was observed to be more efficient and achieved 79%, 72%, 77%, 66% and 56% reductions in ADMI color value, COD, BOD, TDS and TSS of textile effluent, respectively. HPTLC, GC-MS, FTIR, UV-vis spectroscopy and activated oxido-reductive enzyme activities confirmed the phytotrasformation of parent dye in to new metabolites. T-RFLP analysis of rhizospheric bacteria of F. dichotoma, A. baccifera and consortium FA revealed the presence of 88, 98 and 223 genera which could have been involved in dye removal. Toxicity evaluation of products formed after phytotransformation of Methyl Orange by consortium FA on bivalves Lamellidens marginalis revealed less damage of the gills architecture when analyzed histologically. Toxicity measurement by Random Amplification of Polymorphic DNA (RAPD) technique revealed bivalve DNA banding pattern in treated Methyl Orange sample suggesting less toxic nature of phytotransformed dye products.

Ecotoxicological risk assessment of contaminated soil from a complex of ceramic industries using earthworm Eisenia fetida.

The aim of this study was to determine ecotoxicological parameters for biomonitoring of environmental risk of native soils from a ceramic industrial area that had been contaminated with cadmium (Cd) and chromium (Cr) by using the earthworm, Eisenia fetida. Initially, lab tests were conducted to compare earthworm (Eisenia fetida) growth, survival, morphology, behavior, and reproduction rates following exposure to six concentrations of contaminated soil at 0%, 6.25%, 12.5%, 25%, 50%, or 100% mixed in artificial soil and cow dung following a 28-d incubation period. The second experiment consisted of utilizing Eisenia fetida in a predetermined lowest observed effect concentration to measure heavy metals bioaccumulation from superficial soil collected from a ceramic industrial area following a 56-d exposure. Data demonstrated that in the lab earthworms maintained at 6.25% of contaminated soil, exhibited significant increase in mean weight, bioaccumulation of Cd and Cr associated with a significant decrease in the amount of Cd and Cr in the soil. At field testing, similar results that were observed as in the lab as evidenced by rise in mean weight, higher levels of Cd and Cr in the earthworm tissue accompanied by significant fall in soil levels of Cd and Cr. In conclusion, at tested relevant environmental concentrations, the use of Eisenia fetida for assessing ecotoxicological risk arising from contaminated soil due to ceramic industrial pollutant emissions was found to be an effective tool for biomonitoring program.

Water treatment residuals as soil amendments: Examining element extractability, soil porewater concentrations and effects on earthworm behaviour and survival.

Drinking water treatment residuals (WTRs), the by-product of water clarification processes, are routinely disposed of via landfill however there is a growing body of research that demonstrates the material has great potential for beneficial use in environmental applications. Application to agricultural land is one option showing great promise (i.e. a low cost disposal route that provides organic matter input to soils and other potential benefits), however questions remain as to the impact such applications may have on earthworm survival and behaviour and also on the potential effects it may have on soil porewater chemistry. This study examined the leachability of elements within two types of WTRs (one Al- and one Fe- based) from England via 0.001 M CaCl2 solution, at varying pH, and via the Community Bureau of Reference (BCR) sequential extraction scheme. Earthworm avoidance, survival, growth, reproduction and element concentrations were examined in WTR-amended sandy soils (0%, 5%, 10%, 20% w/w), while soil porewaters were also recovered from experimental units and examined for element concentrations. The results revealed leachable element concentrations to be very low in both types of WTRs tested and so element leaching from these WTRs would be unlikely to pose any threat to ecosystems under typical agricultural soil conditions. However, when the pH was lowered to 4.4 there was a substantial release of Al from the Al-WTRs (382 mg/kg). Soil porewater element concentrations were influenced to some degree by WTR addition, warranting further examination in terms of any potential implications for nutrient supply or limitation. Earthworm avoidance of WTR-amended soil was only observed for Al-WTRs and only at the maximum applied rate (20% w/w), while survival of earthworms was not affected by either WTR type at any application rate. Earthworm growth and reproduction (cocoon production) were not affected at a statistically significant level but this needs further examination over a longer period of exposure. Increased assimilation of Al and Fe into earthworm tissues was observed at some WTR application rates (maximum fresh weight concentrations of 42 mg/kg for Al and 167 mg/kg for Fe), but these were not at levels likely to pose environmental concerns.

Ecotoxicological effects of fertilizers made from pulping waste liquor on earthworm Eisenia fetida.

In recent years, increasing efforts have focused on production of organic-inorganic compound fertilizers using ammonium sulfite pulping waste liquor. However, their ecological effects on soil have not been studied. In this study, earthworm Eisenia fetida was exposed to various doses (0, 0.13, 0.26 and 0.52 kg/m2) for different time (7, 14, 21, and 28 d) to evaluate the effects of fertilizers made from pulping waste liquor, including reactive oxygen species (ROS) generation, antioxidant enzymes activities, glutathione S-transferase enzyme (GST) activity, malondialdehyde (MDA) content and DNA damage. Results showed that there were significant increase of ROS and MDA levels after 14 d, inducing production of antioxidant enzymes (superoxide dismutase (SOD), peroxidase (POD) and catalase (CAT)) as well as GST. Before 14 d, excess ROS and MDA caused damage to the DNA of earthworms, leading to gradual increase of Olive tail moment (OTM) in the comet assay. With the exposure time extended to 28 d, owing to the combined effects of elimination of free radicals by antioxidant enzymes and detoxification enzymes as well as self-repairing function of cells, ROS and MDA levels declined slightly and OTM gradually decreased. In summary, this study indicated that there was a toxicological effect on earthworms when fertilizers made from pulping waste liquor were applied to soil, which needs more attention.

Geochemical valuation and intake of F, As, and Se in coal wastes contaminated areas and their potential impacts on local inhabitants, Shaanxi China.

This study probe the human health risk of fluoride (F), arsenic (As), and selenium (Se) and their daily intake available quantity to human through different sources in different regions of Shaanxi, China. For this purpose, a number of samples, including coal and coal wastes, rocks, soil, and vegetables were collected from south Qinling Mountain stone-like coal (Geo type-I), Binxian-Jurassic (Geo type-II), Hancheng Permo-Carboniferous (Geo type-III), and countryside (Huanglong County) of Shaanxi province. All these samples were analyzed through atomic fluorescence spectroscopy and combustion hydrolysis methods. Results showed that Geo type-I was enriched with As, Se, and F, Geo type-II, III, and the countryside were slightly enriched with As and F and deficient in Se. The average daily intake (ADI) of Se in Geo type-I was 0.005-0.0045, Geo type-II 0.0005-0.0004, Geo type-III 0.0006-0.0005, and countryside 0.0002-0.001 in mg kg-1 day-1 adult-children, respectively, which was lower than the optimum level (0.06-0.075 mg kg-1day-1). ADI of As at Geo type-I was 0.0085-0.0075, Geo type-II 0.004-0.0037, Geo type-III 0.0008, and countryside 0.00022-0.00019 in mg kg-1 day-1 adult-children, respectively, which was above the acceptable range (10-6-10-4). ADI of F at Geo type-I was 0.0047-0.0041, Geo type-II 0.0098-0.0087, Geo type-III 0.002-0.0017 and countryside 0.0015-0.0013 in mg kg-1 day-1 adult-children, respectively. The toxicity level of Se and F at all the regions was lower than the NOAEL and LOAEL, while As was higher at Geo type-II and I. The extreme deficient of Se than the optimum range along with high F could deregulate the normal body growth especially causes bones and joint problems. However, the study found a rare patient with bone and joint disease (maybe Kashin-Beck disease) in the countryside. To find the exact cause of Kashin-Beck disease, the study needs further medical investigation in Se-deficient regions and their association with selenium deficiency and enriched fluoride.

Metal leaching from refinery waste hydroprocessing catalyst.

The present study aims to develop an eco-friendly methodology for the recovery of nickel (Ni), molybdenum (Mo), and vanadium (V) from the refinery waste spent hydroprocessing catalyst. The proposed process has two stages: the first stage is to separate alumina, while the second stage involves the separation of metal compounds. The effectiveness of leaching agents, such as NH4OH, (NH4)2CO3, and (NH4)2S2O8, for the extraction of Mo, V, Ni, and Al from the refinery spent catalyst has been reported as a function of reagent concentration (0.5 to 2.0 molar), leaching time (1 to 6 h), and temperature (35 to 60°C). The optimal leaching conditions were achieved to obtain the maximum recovery of Mo, Ni, and V metals. The effect of the mixture of multi-ammonium salts on the metal extraction was also studied, which showed an adverse effect for Ni and V, while marginal improvement was observed for Mo leaching. The ammonium salts can form soluble metal complexes, in which stability or solubility depends on the nature of ammonium salt and the reaction conditions. The extracted metals and support can be reused to synthesize a fresh hydroprocessing catalyst. The process will reduce the refinery waste and recover the expensive metals. Therefore, the process is not only important from an environmental point of view but also vital from an economic perspective.

Toxicity assessment of untreated/treated electroplating sludge using human and plant bioassay.

The purpose of this work was to assess the risk to the environment arising from the electroplating sludge from both chemical and toxicological point of view. Both approaches were used for the assessment of the treatment efficiency which consisted of CaO based solidification followed by thermal treatment at 400°C. The elemental composition was determined in the bulk samples and the leachates of untreated sludge. The toxicity of the leachate was determined using two human colorectal adenocarcinoma cell lines (Caco-2 and SW 480) and Hordeum vulgare L. based plant bioassay. The same toxicity tests were employed to the leachate of the treated sludge. Untreated sludge showed extremely high cytotoxic effect to both human and plant bio-system in dose-dependent manner. The percentages higher than 0.5% and 0.05% of the leachate caused significant cytotoxic effect on Caco-2 and SW 480 cells, respectively. The percentages of the leachate higher than 0.05% also showed significant toxic effect to H. vulgare L. bio-system with complete arrest of seed germination following the treatment with 100% to 5% of the leachate. The leachate of the treated sludge showed no toxicity to any of the test systems confirming the efficiency and justification of the employed procedures for the detoxification of electroplating sludge.

Effect of addition of sewage sludge and coal sludge on bioavailability of selected metals in the waste from the zinc and lead industry.

This study evaluated the content of bioavailable forms of selected heavy metals present in the waste from Zn and Pb processing that can potentially have an effect on the observed difficulties in reclamation of landfills with this waste. The particular focus of the study was on iron because its potential excess or deficiency may be one of the causes of the failure in biological reclamation. The study confirmed that despite high content of total iron in waste (mean value of 200.975gkg-1), this metal is present in the forms not available to plants (mean: 0.00009gkg-1). The study attempted to increase its potential bioavailability through preparation of the mixtures of this waste with additions in the form of sewage sludge and coal sludge in different proportions. Combination of waste with 10% of coal sludge and sewage sludge using the contents of 10%, 20% and 30% increased the amounts of bioavailable iron forms to the level defined as sufficient for adequate plant growth. The Lepidum sativum test was used to evaluate phytotoxicity of waste and the mixtures prepared based on this waste. The results did not show unambiguously that the presence of heavy metals in the waste had a negative effect on the growth of test plant roots.