Breaking down antibiotic resistance in methicillin-resistant Staphylococcus aureus: Combining antimicrobial photodynamic and antibiotic treatments.

The widespread use of antibiotics drives the evolution of antimicrobial-resistant bacteria (ARB), threatening patients and healthcare professionals. Therefore, the development of novel strategies to combat resistance is recognized as a global healthcare priority. The two methods to combat ARB are development of new antibiotics or reduction in existing resistances. Development of novel antibiotics is a laborious and slow-progressing task that is no longer a safe reserve against looming risks. In this research, we suggest a method for reducing resistance to extend the efficacious lifetime of current antibiotics. Antimicrobial photodynamic therapy (aPDT) is used to generate reactive oxygen species (ROS) via the photoactivation of a photosensitizer. ROS then nonspecifically damage cellular components, leading to general impairment and cell death. Here, we test the hypothesis that concurrent treatment of bacteria with antibiotics and aPDT achieves an additive effect in the elimination of ARB. Performing aPDT with the photosensitizer methylene blue in combination with antibiotics chloramphenicol and tetracycline results in significant reductions in resistance for two methicillin-resistant Staphylococcus aureus (MRSA) strains, USA300 and RN4220. Additional resistant S. aureus strain and antibiotic combinations reveal similar results. Taken together, these results suggest that concurrent aPDT consistently decreases S. aureus resistance by improving susceptibility to antibiotic treatment. In turn, this development exhibits an alternative to overcome some of the growing MRSA challenge.

Impact of PVC microplastics in photodynamic inactivation of Staphylococcus aureus and MRSA.

Photodynamic processes have found widespread application in therapies. These processes involve photosensitizers (PSs) that, when excited by specific light wavelengths and in the presence of molecular oxygen, generate reactive oxygen species (ROS), that target cells leading to inactivation. Photodynamic action has gained notable attention in environmental applications, particularly against pathogens and antibiotic-resistant bacteria (ARB) that pose a significant challenge to public health. However, environmental matrices frequently encompass additional contaminants and interferents, including microplastics (MPs), which are pollutants of current concern. Their presence in water and effluents has been extensively documented, highlighting their impact on conventional treatment methods, but this information remains scarce in the context of photodynamic inactivation (PDI) setups. Here, we described the effects of polyvinyl chloride (PVC) microparticles in PDI targeting Staphylococcus aureus and its methicillin-resistant strain (MRSA), using curcumin as a PS under blue light. The presence of PVC microparticles does not hinder ROS formation; however, depending on its concentration, it can impact bacterial inactivation. Our results underscore that PDI remains a potent method for reducing bacterial concentrations in water and wastewater containing ARB, even in highly contaminated scenarios with MPs.

Antibacterial photodynamic activity of photosensitizer-embedded alginate-pectin-carboxymethyl cellulose composite biopolymer films.

Antimicrobial photodynamic therapy (APDT) is a promising approach for treatment of wounds infected with antibiotic-resistant bacteria. In this approach, delivery of appropriate concentration of photosensitizer (PS) at the infected site is a critical step; it is therefore essential that PS need to be administered at the infected site in a suitable formulation. Here, we report preparation of PS-embedded composite biopolymer films and their photobactericidal properties against methicillin-resistant Staphylococcus aureus (MRSA) and biocompatibility. Sodium alginate (SA), pectin (PC), and carboxymethyl cellulose (CMC) were used for preparing films containing chlorin p6 (Cp6, anionic PS) or methylene blue (MB, cationic PS). Films containing 1% CMC (15 mm diameter; 110 ± 09 µm thickness) showed ~ 55% light transmission in 500 to 750 nm region and high swelling rate as indicated by ~ 38% increase in diameter within 1 h. Absorption spectroscopic studies of PS-embedded films revealed that while Cp6 existed mainly in monomeric state, MB existed in both dimeric and monomeric forms. MRSA incubated with the film for 1 h displayed substantial uptake of Cp6 and MB as indicated by the presence of Cp6 fluorescence and MB staining in cells under the microscope. Furthermore, photodynamic treatment (660 nm, 10 J/cm2) of MRSA with Cp6 embedded in film or free Cp6 resulted in ~ 3 log reduction in colony-forming units (cfu), whereas decrease in cfu was less (~ 1 log) for MB-embedded film than for free MB (~ 6 logs). Studies on human keratinocyte (HaCaT) cells showed that there was no significant change in the viability of cells when they were incubated with solubilized films (plain) for 24 h or subjected to treatment with PS-containing films followed by PDT. These results suggest that films are biocompatible and have potential application in photodynamic treatment of MRSA-infected wounds.

The efficacy of vacuum-ultraviolet light disinfection of some common environmental pathogens.

BACKGROUND: This study is to elucidate the disinfection effect of ozone producing low-pressure Hg vapor lamps against human pathogens. Ozone producing low-pressure Hg vapor lamps emit mainly 254 nm ultraviolet light C (UVC) with about 10% power of Vacuum-ultraviolet (VUV) light at 185 nm. The combination of UVC and VUV can inactivate airborne pathogens by disrupting the genetic materials or generation of reactive oxygen species, respectively. In this study, inactivation of common bacteria including Escherichia coli ATCC25922 (E. coli), Extended Spectrum Beta-Lactamase-producing E. coli (ESBL), Methicillin-resistant Staphylococcus aureus (MRSA) and Mycobacterium tuberculosis (MTB), and that of influenza A viruses H1N1 and H3N2 under the radiation from ozone producing low-pressure Hg vapor lamps was examined. Log reduction values at different treatment durations were determined. METHODS: In vitro tests were carried out. Various bacterium and virus suspensions were added onto nitrocellulose filter papers and subjected to the illumination from ozone producing low-pressure Hg vapor lamps. The extents of pathogen inactivation at different illumination times were investigated by conducting a series of experiments with increasing duration of illumination. log10 reduction in CFU/ml and reduction at log10(TCID50) were respectively measured for bacteria and viruses. The disinfection effectiveness of this type of lamps against the pathogens under the environment with a moderate barrier to light was therefore evaluated. RESULTS: Ozone producing low-pressure Hg vapor lamp successfully inactivated these human pathogens. Nevertheless, among these pathogens, disinfection of MTB required more intense treatment. In the best tested situation, 3-log10 inactivation of pathogens can be achieved with ≤10 min of VUV treatment except MTB which needed about 20 min. This demonstrated the high resistance against UV disinfection of MTB. CONCLUSIONS: Following the criteria that valid germicidal results can be reflected with 3-log10 inactivation for bacteria, 4-log10 inactivation for viruses and 5-log10 inactivation for MTB, most of the bacteria required ≤10 min of VUV treatment, 20 min for the influenza viruses while MTB needed about 30 min VUV treatment. This indicated that VUV light is an effective approach against different environmental microorganisms.

Clinical and microbiological effect of pulsed xenon ultraviolet disinfection to reduce multidrug-resistant organisms in the intensive care unit in a Japanese hospital: a before-after study.

BACKGROUND: No-touch environmental disinfection using ultraviolet devices has been highlighted in the past several years to control the transmission of multidrug-resistant organisms (MDROs). However, its effectiveness in non-US healthcare settings is yet to be examined. This study aimed to evaluate the effectiveness of disinfection by portable pulsed xenon ultraviolet (PX-UV) devices in controlling transmission of MDROs in a non-US healthcare setting. METHODS: All patients admitted in the intensive care unit in a 629-bed tertiary referral hospital in Japan from August 2016 to February 2019 were enrolled. During the study period, PX-UV disinfection was added to manual terminal cleaning after every patient transfer/discharge. For microbiological evaluation, surfaces were selected for sampling by contact plates before/after manual cleaning and after PX-UV. After overnight incubation, colonies on the plates were counted. RESULTS: The incidence of newly acquired methicillin-resistant Staphylococcus aureus (MRSA) declined significantly (13.8 to 9.9 per 10,000 patient days, incidence rate ratio 0.71, p = 0.002), as well as that of newly acquired drug-resistant Acinetobacter (48.5 to 18.1, 0.37, p < 0.001). The percent reduction of the microbiological burden by manual cleaning was 81%, but a further 59% reduction was achieved by PX-UV. CONCLUSIONS: PX-UV is effective in further reducing the microbial burden and controlling MDROs in a non-US healthcare setting.

Antimicrobial Blue Light Inactivation of Microbial Isolates in Biofilms.

BACKGROUND AND OBJECTIVES: Biofilms cause more than 80% of infections in humans, including more than 90% of all chronic wound infections and are extremely resistant to antimicrobials and the immune system. The situation is exacerbated by the fast spreading of antimicrobial resistance, which has become one of the biggest threats to current public health. There is consequently a critical need for the development of alternative therapeutics. Antimicrobial blue light (aBL) is a light-based approach that exhibits intrinsic antimicrobial effect without the involvement of exogenous photosensitizers. In this study, we investigated the antimicrobial effect of this non-antibiotic approach against biofilms formed by microbial isolates of multidrug-resistant bacteria. STUDY DESIGN/MATERIALS AND METHODS: Microbial isolates of Acinetobacter baumannii, Candida albicans, Escherichia coli, Enterococcus faecalis, MRSA, Neisseria gonorrhoeae, Pseudomonas aeruginosa, and Proteus mirabilis were studied. Biofilms were grown in microtiter plates for 24 or 48 hours or in the CDC biofilm reactor for 48 hours and exposed to aBL at 405 nm (60 mW/cm2 , 60 or 30 minutes). The anti-biofilm activity of aBL was measured by viable counts. RESULTS: The biofilms of A. baumannii, N. gonorrhoeae, and P. aeruginosa were the most susceptible to aBL with between 4 and 8 log10 inactivation after 108 J/cm2 (60 mW/cm2 , 30 minutes) or 216 J/cm2 (60 mW/cm2 , 60 minutes) aBL were delivered in the microplates. On the contrary, the biofilms of C. albicans, E. coli, E. faecalis, and P. mirabilis were the least susceptible to aBL inactivation (-0.30, -0.24, -0.84, and -0.68 log10 inactivation, respectively). The same aBL treatment in biofilms developed in the CDC biofilm reactor, caused -1.68 log10 inactivation in A. baumannii and -1.74 and -1.65 log10 inactivation in two different strains of P. aeruginosa. CONCLUSIONS: aBL exhibits potential against pathogenic microorganisms and could help with the significant need for new antimicrobials in clinical practice to manage multidrug-resistant infections. Lasers Surg. Med. © 2019 Wiley Periodicals, Inc.

Sodium nitrite potentiates antimicrobial photodynamic inactivation: possible involvement of peroxynitrate.

We have recently shown that a wide range of different inorganic salts can potentiate antimicrobial photodynamic inactivation (aPDI) and TiO2-mediated antimicrobial photocatalysis. Potentiation has been shown with azide, bromide, thiocyanate, selenocyanate, and most strongly, with iodide. Here we show that sodium nitrite can also potentiate broad-spectrum aPDI killing of Gram-positive MRSA and Gram-negative Escherichia coli bacteria. Literature reports have previously shown that two photosensitizers (PS), methylene blue (MB) and riboflavin, when excited by broad-band light in the presence of nitrite could lead to tyrosine nitration. Addition of up to 100 mM nitrite gave 6 logs of extra killing in the case of Rose Bengal excited by green light against E. coli, and 2 logs of extra killing against MRSA (eradication in both cases). Comparable results were obtained for other PS (TPPS4 + blue light and MB + red light). Some bacterial killing was obtained when bacteria were added after light using a functionalized fullerene (LC15) + nitrite + blue light, and tyrosine ester amide was nitrated using both "in" and "after" modes with all four PS. The mechanism could involve formation of peroxynitrate by a reaction between superoxide radicals and nitrogen dioxide radicals; formation of the latter species was demonstrated by spin trapping with nitromethane.

Effect of UV-C light or hydrogen peroxide wipes on the inactivation of methicillin-resistant Staphylococcus aureus, Clostridium difficile spores and norovirus surrogate.

AIMS: The current study aimed to assess the potential of a new high dose ultraviolet (UV) disinfection device to inactivate methicillin-resistant Staphylococcus aureus (MRSA), Clostridium difficile and a norovirus surrogate on handheld mobile devices, and to compare the efficacy of the UV-C device to hydrogen peroxide disinfection wipes. METHODS AND RESULTS: Suspensions of MRSA, C. difficile spores and a surrogate for norovirus (MS2) were inoculated onto glass or plastic coupons, with or without organic contamination and were exposed to continuous UV-C light for 15-60 s (165-646 mJ cm-2 ) in a self-contained UV-C chamber or treated with hydrogen peroxide wipes. Increasing the UV-C dose from 310 to 650 mJ cm-2 did not result in greater levels of inactivation. UV-C light inactivated all three micro-organisms, in the absence of organic contamination, by >2·9 log. Treatment of MRSA, C. difficile spores or MS2, in the presence of organic contamination, with UV-C light (310-646 mJ cm-2 ) resulted in 2·3-3·7 log reductions. Treatment of MRSA with UV-C light provided levels of inactivation comparable to treatment with hydrogen peroxide wipes used following the manufacturer's instructions. CONCLUSIONS: UV-C light and hydrogen peroxide wipes had strong antimicrobial activity against MRSA, C. difficile spores and a norovirus surrogate, in the presence or absence of organic contamination. SIGNIFICANCE AND IMPACT OF THE STUDY: Chemical disinfection wipes are widely used in healthcare facilities, but they are not recommended for use on handheld mobile devices which may harbour pathogenic micro-organisms. The powerful bactericidal, sporicidal and virucidal activity of this high dose UV-C light device, shows that this technology is a promising alternative to chemical disinfectants, particularly for control of MRSA.

Modelling of ultraviolet light inactivation kinetics of methicillin-resistant Staphylococcus aureus, vancomycin-resistant Enterococcus, Clostridium difficile spores and murine norovirus on fomite surfaces.

AIMS: Quantitative data on the doses needed to inactivate micro-organisms on fomites are not available for ultraviolet applications. The goal of this study was to determine the doses of UV light needed to reduce bacteria and murine norovirus (MNV) on hard surface fomites through experimentation and to identify appropriate models for predicting targeted levels of reduction. METHODS AND RESULTS: Stainless steel and Formica laminate coupons were selected as they are common surfaces found in healthcare settings. Test organisms included methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant Enterococcus (VRE), Clostridium difficile and MNV. The fomites were inoculated with 105 -107 bacteria or virus and exposed to a range of UV doses. The order of resistance to UV irradiation was virus, bacterial spore and vegetative cell. The best fitting inactivation curves suggested nonlinear responses to increasing doses after a 3-4 log reduction in the test organisms. The average UV doses required for a 3 log reduction in the C. difficile, MRSA and VRE were 16 000, 6164 and 11 228 (mJ-s cm-2 ) for stainless steel, respectively, and 16 000, 11 727 and 12 441 (mJ-s cm-2 ) for Formica laminate, respectively. CONCLUSIONS: Higher UV light doses are required to inactivate bacteria and viruses on hard surfaces than in suspension. Greater doses are needed to inactivate bacterial spores and MNV compared to vegetative bacteria. SIGNIFICANCE AND IMPACT OF THE STUDY: Quantitative data and models on UV light doses needed to inactivate bacteria and MNV on hard surfaces are now available. The generalizable results of this study can be used to estimate required UV dosages to achieve targeted levels of inactivation based on estimated levels of contamination or to support quantitative microbial risk assessments.

Different photodynamic effects of blue light with and without riboflavin on methicillin-resistant Staphylococcus aureus (MRSA) and human keratinocytes in vitro.

Methicillin-resistant Staphylococcus aureus (MRSA) is an important cause of infections in humans. Photodynamic therapy using blue light (450 nm) could possibly be used to reduce MRSA on different human tissue surfaces without killing the human cells. It could be less harmful than 300-400 nm light or common disinfectants. We applied blue light ± riboflavin (RF) to MRSA and keratinocytes, in an in vitro liquid layer model, and compared the effect to elimination using common disinfection fluids. MRSA dilutions (8 × 105/mL) in wells were exposed to blue light (450 nm) ± RF at four separate doses (15, 30, 56, and 84 J/cm2). Treated samples were cultivated on blood agar plates and the colony forming units (CFU) determined. Adherent human cells were cultivated (1 × 104/mL) and treated in the same way. The cell activity was then measured by Cell Titer Blue assay after 24- and 48-h growth. The tested disinfectants were chlorhexidine and hydrogen peroxide. Blue light alone (84 J/cm2) eliminated 70% of MRSA. This dose and riboflavin eradicated 99-100% of MRSA. Keratinocytes were not affected by blue light alone at any dose. A dose of 30 J/cm2 in riboflavin solution inactivated keratinocytes completely. Disinfectants inactivated all cells. Blue light alone at 450 nm can eliminate MRSA without inactivation of human keratinocytes. Hence, a high dose of blue light could perhaps be used to treat bacterial infections without loss of human skin cells. Photodynamic therapy using riboflavin and blue light should be explored further as it may perhaps be possible to exploit in treatment of skin diseases associated with keratinocyte hyperproliferation.

Carbon Nanomaterials and LED Irradiation as Antibacterial Strategies against Gram-Positive Multidrug-Resistant Pathogens.

BACKGROUND: Due to current antibiotic resistance worldwide, there is an urgent need to find new alternative antibacterial approaches capable of dealing with multidrug-resistant pathogens. Most recent studies have demonstrated the antibacterial activity and non-cytotoxicity of carbon nanomaterials such as graphene oxide (GO) and carbon nanofibers (CNFs). On the other hand, light-emitting diodes (LEDs) have shown great potential in a wide range of biomedical applications. METHODS: We investigated a nanotechnological strategy consisting of GO or CNFs combined with light-emitting diod (LED) irradiation as novel nanoweapons against two clinically relevant Gram-positive multidrug-resistant pathogens: methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-resistant Staphylococcus epidermidis (MRSE). The cytotoxicity of GO and CNFs was studied in the presence of human keratinocyte HaCaT cells. RESULTS: GO or CNFs exhibited no cytotoxicity and high antibacterial activity in direct contact with MRSE and MRSA cells. Furthermore, when GO or CNFs were illuminated with LED light, the MRSE and MRSA cells lost viability. The rate of decrease in colony forming units from 0 to 3 h, measured per mL, increased to 98.5 ± 1.6% and 95.8 ± 1.4% for GO and 99.5 ± 0.6% and 99.7 ± 0.2% for CNFs. CONCLUSIONS: This combined antimicrobial approach opens up many biomedical research opportunities and provides an enhanced strategy for the prevention and treatment of Gram-positive multidrug-resistant infections.

Photodynamic inactivation of bacteria to decolonize meticillin-resistant Staphylococcus aureus from human skin.

BACKGROUND: To prevent infections that arise from the skin surface it is necessary to decolonize human skin prior to any proposed treatment or surgical intervention. Photodynamic inactivation of bacteria (PIB) uses cationic photosensitizers that attach to the surface of bacteria, generate reactive oxygen species on light irradiation and thereby kill bacteria via oxidative mechanisms. OBJECTIVES: To evaluate the potential and the safety of PIB for decolonization of bacteria from skin. METHODS: PIB with the new photosensitizer SAPYR [2-((4-pyridinyl)methyl)-1H-phenalen-1-one chloride] was initially tested against different bacterial species in vitro. Then, ex vivo porcine skin samples were used as a model for decolonization of different bacteria species. The numbers of viable bacteria were quantified and the mitochondrial activity of skin cells was histologically analysed (using nitroblue tetrazolium chloride, NBTC). The same procedure was performed for human skin and meticillin-resistant Staphylococcus aureus (MRSA). RESULTS: The in vitro studies showed a 5 log10 reduction of all tested bacterial species. On ex vivo porcine skin samples, PIB reduced the viability of all tested bacterial species by at least 3 log10 steps. On human skin samples ex vivo, PIB reduced the number of viable MRSA by maximal 4·4 log10 steps (1000 µmol L-1 SAPYR, incubation time 10 min, 60 J cm-2 ). NBTC staining showed normal mitochondrial activity in skin cells after all PIB modalities. CONCLUSIONS: The results of this study show that PIB can effectively and safely kill bacteria like MRSA on the skin surface and might have the potential of skin decolonization in vivo.

Environmental disinfection with photocatalyst as an adjunctive measure to control transmission of methicillin-resistant Staphylococcus aureus: a prospective cohort study in a high-incidence setting.

BACKGROUND: Environmental disinfection with continuously antimicrobial surfaces could offer superior control of surface bioburden. We sought to decide the efficacy of photocatalyst antimicrobial coating in reducing methicillin-resistant Staphylococcus aureus (MRSA) acquisition in high incidence setting. METHODS: We performed prospective cohort study involving patients hospitalized in medical intensive care unit. A titanium dioxide-based photocatalyst was coated on high touch surfaces and walls. Five months of pre-intervention data were compared with five months of post-intervention data. The incidence rates of multidrug-resistant organism acquisition and the rates of hospital-acquired blood stream infection, pneumonia, urinary tract infection, and Clostridium difficile-associated diseases were compared using Cox proportional hazards regression analysis. RESULTS: In total, 621 patients were included. There was significant decrease in MRSA acquisition rate after photocatalyst coating (hazard ratio, 0.37; 95% confidence interval, 0.14-0.99; p = 0.04). However, clinical identification of vancomycin-resistant Enterococcus spp. and multidrug-resistant Acinetobacter baumannii did not decrease significantly. The hazard of contracting hospital-acquired pneumonia during the intervention period compared to baseline period was 0.46 (95% confidence interval, 0.23-0.94; p = 0.03). CONCLUSIONS: In conclusion, MRSA rate was significantly reduced after photocatalyst coating. We provide evidence that photocatalyst disinfection can be an adjunctive measure to control MRSA acquisition in high-incidence settings. TRIAL REGISTRATION: ISRCTN Registry ( ISRCTN31972004 ). Registered retrospectively on November 19, 2018.

Lethal CD4 T Cell Responses Induced by Vaccination Against Staphylococcus aureus Bacteremia.

Multiple candidate vaccines against Staphylococcus aureus infections have failed in clinical trials. Analysis of a recent prematurely halted vaccine trial revealed increased mortality rates among vaccine recipients in whom postsurgical S. aureus infection developed, emphasizing the potential for induction of detrimental immune responses and the need to better understand the requirements for protective immunity against S. aureus. These failures of single-antigen vaccines have prompted ongoing development of multicomponent vaccines to target the multitude of S. aureus virulence factors. In the current study, we used lethally irradiated S. aureus as a model multicomponent vaccine and showed that vaccination of mice decreased survival in a bacteremia challenge model. These deleterious effects were due to a CD4 T-cell-dependent interferon γ response and could be prevented by inhibiting development of this response during vaccination. Our results identify the potential for vaccination to induce pathological immune responses, and they have implications for recent vaccine failures and the design of future staphylococcal vaccines.

Ultraviolet (UV)-reflective paint with ultraviolet germicidal irradiation (UVGI) improves decontamination of nosocomial bacteria on hospital room surfaces.

An ultraviolet germicidal irradiation (UVGI) generator (the TORCH, ClorDiSys Solutions, Inc.) was used to compare the disinfection of surface coupons (plastic from a bedrail, stainless steel, and chrome-plated light switch cover) in a hospital room with walls coated with ultraviolet (UV)-reflective paint (Lumacept) or standard paint. Each surface coupon was inoculated with methicillin-resistant Staphylococcus aureus (MRSA) or vancomycin-resistant Enterococcus faecalis (VRE), placed at 6 different sites within a hospital room coated with UV-reflective paint or standard paint, and treated by 10 min UVC exposure (UVC dose of 0-688 mJ/cm2 between sites with standard paint and 0-553 mJ/cm2 with UV-reflective paint) in 8 total trials. Aggregated MRSA concentrations on plastic bedrail surface coupons were reduced on average by 3.0 log10 (1.8 log10 Geometric Standard Deviation [GSD]) with standard paint and 4.3 log10 (1.3 log10 GSD) with UV-reflective paint (p = 0.0005) with no significant reduction differences between paints on stainless steel and chrome. Average VRE concentrations were reduced by ≥4.9 log10 (<1.2 log10 GSD) on all surface types with UV-reflective paint and ≤4.1 log10 (<1.7 log10 GSD) with standard paint (p < 0.05). At 5 aggregated sites directly exposed to UVC light, MRSA concentrations on average were reduced by 5.2 log10 (1.4 log10 GSD) with standard paint and 5.1 log10 (1.2 log10 GSD) with UV-reflective paint (p = 0.017) and VRE by 4.4 log10 (1.4 log10 GSD) with standard paint and 5.3 log10 (1.1 log10 GSD) with UV-reflective paint (p < 0.0001). At one indirectly exposed site on the opposite side of the hospital bed from the UVGI generator, MRSA concentrations on average were reduced by 1.3 log10 (1.7 log10 GSD) with standard paint and 4.7 log10 (1.3 log10 GSD) with UV-reflective paint (p < 0.0001) and VRE by 1.2 log10 (1.5 log10 GSD) with standard paint and 4.6 log10 (1.1 log10 GSD) with UV-reflective paint (p < 0.0001). Coating hospital room walls with UV-reflective paint enhanced UVGI disinfection of nosocomial bacteria on various surfaces compared to standard paint, particularly at a surface placement site indirectly exposed to UVC light.

The degree of virulence does not necessarily affect MRSA biofilm strength and response to photodynamic therapy.

Biofilm formation transforms infections from acute to chronic, increasing patient mortality and significantly increasing healthcare costs. We are studying the prevalence of some virulence genes among methicillin resistant Staphylococcus aureus (MRSA) isolates relative to biofilm formation and the potential of photoactivated hypericin to treat these infections. Isolates were collected from three Egyptian governorates over seven months in 2011, 100 isolates were identified as MRSA. Biofilm formation was established using crystal violet staining and 2,3,5-triphenyl tetrazolium chloride reduction. Twenty two percent of the isolates formed biofilms, of which 68.2% were moderate to strong. The virulence genes were detected using polymerase chain reaction. spaX (x-region of protein A) was most prevalent. All biofilm-formers lacked cap5 (capsular polysaccharide 5), the other genes were: nuc (thermonuclease) > clfA (clumping factor) > spaIgG (IgG binding site of protein A), fnbA (fibronectin protein A), cap8 (capsular polysaccharide 8), agr (accessory-gene-regulator locus) > fnbB (fibronectin protein B). agr-locus was only found in 22.22% of moderate biofilm-formers, the remaining genes were almost equally prevalent among biofilm-formers and negative controls. Photoactivated hypericin efficiently inhibited 92.2-99.9% of biofilm viability, irrespective of the number of virulence genes. To conclude, biofilm formation, and treatment might be affected by a myriad of virulence factors rather than a single gene, however, photoactivated hypericin remains a potential antibiofilm approach.

A combination of silver nanoparticles and visible blue light enhances the antibacterial efficacy of ineffective antibiotics against methicillin-resistant Staphylococcus aureus (MRSA).

BACKGROUND: Silver nanoparticles (AgNPs) are potential antimicrobials agents, which can be considered as an alternative to antibiotics for the treatment of infections caused by multi-drug resistant bacteria. The antimicrobial effects of double and triple combinations of AgNPs, visible blue light, and the conventional antibiotics amoxicillin, azithromycin, clarithromycin, linezolid, and vancomycin, against ten clinical isolates of methicillin-resistant Staphylococcus aureus (MRSA) were investigated. METHODS: The antimicrobial activity of AgNPs, applied in combination with blue light, against selected isolates of MRSA was investigated at 1/2-1/128 of its minimal inhibitory concentration (MIC) in 24-well plates. The wells were exposed to blue light source at 460 nm and 250 mW for 1 h using a photon emitting diode. Samples were taken at different time intervals, and viable bacterial counts were determined. The double combinations of AgNPs and each of the antibiotics were assessed by the checkerboard method. The killing assay was used to test possible synergistic effects when blue light was further combined to AgNPs and each antibiotic at a time against selected isolates of MRSA. RESULTS: The bactericidal activity of AgNPs, at sub-MIC, and blue light was significantly (p < 0.001) enhanced when both agents were applied in combination compared to each agent alone. Similarly, synergistic interactions were observed when AgNPs were combined with amoxicillin, azithromycin, clarithromycin or linezolid in 30-40 % of the double combinations with no observed antagonistic interaction against the tested isolates. Combination of the AgNPs with vancomycin did not result in enhanced killing against all isolates tested. The antimicrobial activity against MRSA isolates was significantly enhanced in triple combinations of AgNPs, blue light and antibiotic, compared to treatments involving one or two agents. The bactericidal activities were highest when azithromycin or clarithromycin was included in the triple therapy compared to the other antibiotics tested. CONCLUSIONS: A new strategy can be used to combat serious infections caused by MRSA by combining AgNPs, blue light, and antibiotics. This triple therapy may include antibiotics, which have been proven to be ineffective against MRSA. The suggested approach would be useful to face the fast-growing drug-resistance with the slow development of new antimicrobial agents, and to preserve last resort antibiotics such as vancomycin.

Comparison of hospital room surface disinfection using a novel ultraviolet germicidal irradiation (UVGI) generator.

The estimated 721,800 hospital acquired infections per year in the United States have necessitated development of novel environmental decontamination technologies such as ultraviolet germicidal irradiation (UVGI). This study evaluated the efficacy of a novel, portable UVGI generator (the TORCH, ChlorDiSys Solutions, Inc., Lebanon, NJ) to disinfect surface coupons composed of plastic from a bedrail, stainless steel, chrome-plated light switch cover, and a porcelain tile that were inoculated with methicillin-resistant Staphylococcus aureus (MRSA) or vancomycin-resistant Enterococcus faecalis (VRE). Each surface type was placed at 6 different sites within a hospital room and treated by 10-min ultraviolet-C (UVC) exposures using the TORCH with doses ranging from 0-688 mJ/cm(2) between sites. Organism reductions were compared with untreated surface coupons as controls. Overall, UVGI significantly reduced MRSA by an average of 4.6 log10 (GSD: 1.7 log10, 77% inactivation, p < 0.0001) and VRE by an average of 3.9 log10 (GSD: 1.7 log10, 65% inactivation, p < 0.0001). MRSA on bedrail was reduced significantly (p < 0.0001) less than on other surfaces, while VRE was reduced significantly less on chrome (p = 0.0004) and stainless steel (p = 0.0012) than porcelain tile. Organisms out of direct line of sight of the UVC generator were reduced significantly less (p < 0.0001) than those directly in line of sight. UVGI was found an effective method to inactivate nosocomial pathogens on surfaces evaluated within the hospital environment in direct line of sight of UVGI treatment with variation between organism and surface types.

Ultraviolet germicidal irradiation susceptibility of methicillin-resistant Staphylococcus aureus compared with methicillin-susceptible S. aureus.

Antibiotic misuse and overuse in both the healthcare and agricultural fields have dramatically increased the prevalence of antibiotic resistance in human pathogens. Two strains of methicillin-resistant Staphylococcus aureus (MRSA) (ATCC 43330 and a wild-type) and 1 strain of methicillin-susceptible S. aureus (ATCC 25923) were challenged (9 runs in triplicate) in a preliminary study with ultraviolet germicidal irradiation (UVGI) doses ranging from 0.25 to 3.00 mJ/cm(2). The mean percent kill was calculated for each strain when compared with the control plates (no exposure to UVGI). Then, each strain was challenged (22 runs in triplicate) with UVGI doses of 2.00, 2.50, and 3.00 mJ/cm(2). The results suggest a difference between the doses required to disinfect surfaces with each strain. Assuming a standard error rate of α = 0.05, there was a significant difference in variance between the MRSA (ATCC 43330 and wild type) strains and the S. aureus (ATCC 25923) methicillin-susceptible strain.

Optimization of the antimicrobial effect of blue light on methicillin-resistant Staphylococcus aureus (MRSA) in vitro.

BACKGROUND AND OBJECTIVE: In previous studies, we showed that irradiation with 405 nm or 470 nm light suppresses up to 92% methicillin-resistant Staphylococcus aureus (MRSA) growth in vitro and that the remaining bacteria re-colonize. In this study, the aim was to develop a protocol that yields 100% MRSA growth suppression. MATERIALS AND METHODS: We cultured 3 × 10(6) and 5 × 10(6) CFU/ml USA300 strain of MRSA and then irradiated each plate with varying fluences of 1-60 J/cm2 of 405 nm or 470 nm light, either once or twice at 6 hours intervals. Next, we plated 7 × 10(6) CFU/ml and irradiated it with 45, 50, 55, or 60 J/cm2 fluence, once, twice, or thrice at the same 6 hours intervals. In a third experiment, the same culture density was irradiated with 0, 165, 180, 220, or 240 J/cm(2) , either once, twice, or thrice. RESULTS: Irradiation with either wavelength significantly reduced the bacterial colonies regardless of bacterial density (P < 0.05). At 3 × 10(6) CFU/ml density, nearly 40% and 50% growth of MRSA were suppressed with as little as 3 J/cm2 of 405 nm and 470 nm wavelengths, respectively. Moreover, 100% of the colonies were suppressed with a single exposure to 55 or 60 J/cm2 of 470 nm light or double treatment with 50, 55, or 60 J/cm2 of 405 nm wavelength. At 5 × 10(6) CFU/ml density, irradiating twice with 50, 55, or 60 J/cm2 of either wavelength suppressed bacterial growth completely, lower fluences did not. The denser 7 × 10(6) CFU/ml culture required higher doses to achieve 100% suppression, either one shot with 220 J/cm2 of 470 nm light or two shots of the same dose using 405 nm. CONCLUSION: The bactericidal effect of blue light can be optimized to yield 100% bacterial growth suppression, but with relatively high fluences for dense bacterial cultures, such as 7 × 10(6) CFU/ml.