Complex Size and Surface Charge Determine Nucleic Acid Transfer by Fusogenic Liposomes.

Highly efficient, biocompatible, and fast nucleic acid delivery methods are essential for biomedical applications and research. At present, two main strategies are used to this end. In non-viral transfection liposome- or polymer-based formulations are used to transfer cargo into cells via endocytosis, whereas viral carriers enable direct nucleic acid delivery into the cell cytoplasm. Here, we introduce a new generation of liposomes for nucleic acid delivery, which immediately fuse with the cellular plasma membrane upon contact to transfer the functional nucleic acid directly into the cell cytoplasm. For maximum fusion efficiency combined with high cargo transfer, nucleic acids had to be complexed and partially neutralized before incorporation into fusogenic liposomes. Among the various neutralization agents tested, small, linear, and positively charged polymers yielded the best complex properties. Systematic variation of liposomal composition and nucleic acid complexation identified surface charge as well as particle size as essential parameters for cargo-liposome interaction and subsequent fusion induction. Optimized protocols were tested for the efficient transfer of different kinds of nucleic acids like plasmid DNA, messenger RNA, and short-interfering RNA into various mammalian cells in culture and into primary tissues.

The Impact of Alkyl-Chain Purity on Lipid-Based Nucleic Acid Delivery Systems - Is the Utilization of Lipid Components with Technical Grade Justified?

The physicochemical properties and transfection efficacies of two samples of a cationic lipid have been investigated and compared in 2D (monolayers at the air/liquid interface) and 3D (aqueous bulk dispersions) model systems using different techniques. The samples differ only in their chain composition due to the purity of the oleylamine (chain precursor). Lipid 8 (using the oleylamine of technical grade for cost-efficient synthesis) shows lateral phase separation in the Langmuir layers. However, the amount of attached DNA, determined by IRRAS, is for both samples the same. In 3D systems, lipid 8 p forms cubic phases, which disappear after addition of DNA. At physiological temperatures, both lipids (alone and in mixture with cholesterol) assemble to lamellar aggregates and exhibit comparable DNA delivery efficiency. This study demonstrates that non-lamellar structures are not compulsory for high transfection rates. The results legitimate the utilization of oleyl chains of technical grade in the synthesis of cationic transfection lipids.

Functional DNA Delivery Enabled by Lipid-Modified Charge-Altering Releasable Transporters (CARTs).

Safe and effective DNA delivery systems are required to enable or enhance clinical strategies and research involving gene therapy and DNA vaccinations. To address this delivery problem, a series of charge-altering releasable transporters (CARTs) with varied lipid content were prepared and evaluated for plasmid DNA (pDNA) delivery into cultured cells. These lipid-modified CART co-oligomers were synthesized in only two steps via sequential organocatalytic ring-opening polymerization of lipid-containing cyclic carbonate monomers and morpholinone monomers. Lipid variations of the CARTs substantially impacted the delivery efficiency of pDNA, with oleyl- and linoleyl-based CARTs showing enhanced performance relative to the commercial transfection agent Lipofectamine 2000 (L2000). The best-performing oleyl CART was carried forward to study stable luciferase transfection with a Sleeping Beauty ( SB) transposon system. The oleyl CART outperformed the L2000 positive control with respect to stable transfection efficiency. CART-pDNA complexes represent a new DNA delivery system for research and clinical applications.

Synthesis, characterization and evaluation of transfection efficiency of dexamethasone conjugated poly(propyleneimine) nanocarriers for gene delivery#.

CONTEXT: Polypropylenimine (PPI), a cationic dendrimer with defined structure and positive surface charge, is a potent non-viral vector. Dexamethasone (Dexa) conveys to the nucleus through interaction with its intracellular receptor. OBJECTIVE: This study develops efficient and non-toxic gene carriers through conjugation of Dexa at various percentages (5, 10 and 20%) to the fourth and the fifth generation PPIs (PPIG4s and PPIG5s). MATERIALS AND METHODS: The 21-OH group of Dexa (0.536 mmol) was modified with methanesulfonyl chloride (0.644 mmol) to activate it (Dexa-mesylate), and then it was conjugated to PPIs using Traut's reagent. After dialysis (48 h) and lyophilization, the physicochemical characteristics of products (PPI-Dexa) including zeta potential, size, buffering capacity and DNA condensing capability were investigated and compared with unmodified PPIs. Moreover, the cytotoxicity and transfection activity of the Dexa-modified PPIs were assessed using Neuro2A cells. RESULTS: Transfection of PPIG4 was close to PEI 25 kDa. Although the addition of Dexa to PPIG4s did not improve their transfection, their cytotoxicity was improved; especially in the carrier to DNA weight ratios (C/P) of one and two. The Dexa conjugation to PPIG5s enhanced their transfection at C/P ratio of one in both 5% (1.3-fold) and 10% (1.6-fold) Dexa grafting, of which the best result was observed in PPIG5-Dexa 10% at C/P ratio of one. DISCUSSION AND CONCLUSIONS: The modification of PPIs with Dexa is a promising approach to improve their cytotoxicity and transfection. The higher optimization of physicochemical characteristics, the better cell transfection and toxicity will be achieved.

Live-cell imaging to compare the transfection and gene silencing efficiency of calcium phosphate nanoparticles and a liposomal transfection agent.

The processing of DNA (for transfection) and short interfering RNA (siRNA; for gene silencing), introduced into HeLa cells by triple-shell calcium phosphate nanoparticles, was followed by live-cell imaging. For comparison, the commercial liposomal transfection agent Lipofectamine was used. The cells were incubated with these delivery systems, carrying either enhanced green fluorescent protein (eGFP)-encoding DNA or siRNA against eGFP. In the latter case, HeLa cells that stably expressed eGFP were used. The expression of eGFP started after 5 h in the case of nanoparticles and after 4 h in the case of Lipofectamine. The corresponding times for gene silencing were 5 h (nanoparticles) and immediately after incubation (Lipofectamine). The expression of eGFP was notably enhanced 2-3 h after cell division (mitosis). In general, the transfection and gene silencing efficiencies of the nanoparticles were lower than those of Lipofectamime, even at a substantially higher dose (factor 20) of nucleic acids. However, the cytotoxicity of the nanoparticles was lower than that of Lipofectamine, making them suitable vectors for in vivo application.

Detailed comparison of retroviral vectors and promoter configurations for stable and high transgene expression in human induced pluripotent stem cells.

Correction of patient-specific induced pluripotent stem cells (iPSC) upon gene delivery through retroviral vectors offers new treatment perspectives for monogenetic diseases. Gene-modified iPSC clones can be screened for safe integration sites and differentiated into transplantable cells of interest. However, the current bottleneck is epigenetic vector silencing. In order to identify the most suitable retroviral expression system in iPSC, we systematically compared vectors from different retroviral genera, different promoters and their combination with ubiquitous chromatin opening elements (UCOE), and several envelope pseudotypes. Lentiviral vectors (LV) pseudotyped with vesicular stomatitis virus glycoprotein were superior to gammaretroviral and alpharetroviral vectors and other envelopes tested. The elongation factor 1α short (EFS) promoter mediated the most robust expression, whereas expression levels were lower from the potent but more silencing-prone spleen focus forming virus (SFFV) promoter. Both full-length (A2UCOE) and minimal (CBX3) UCOE juxtaposed to two physiological and one viral promoter reduced transgene silencing with equal efficiency. However, a promoter-specific decline in expression levels was not entirely prevented. Upon differentiation of transgene-positive iPSC into endothelial cells, A2UCOE.EFS and CBX3.EFS vectors maintained highest transgene expression in a larger fraction of cells as compared with all other constructs tested here. The function of UCOE diminished, but did not fully counteract, vector silencing and possibilities for improvements remain. Nevertheless, the CBX3.EFS in a LV background exhibited the most promising promoter and vector configuration for both high titer production and long-term genetic modification of human iPSC and their progeny.

Characterization of retroviral infectivity and superinfection resistance during retrovirus-mediated transduction of mammalian cells.

Retroviral vectors including lentiviral vectors are commonly used tools to stably express transgenes or RNA molecules in mammalian cells. Their utilities are roughly divided into two categories, stable overexpression of transgenes and RNA molecules, which requires maximal transduction efficiency, or functional selection with retrovirus (RV)-based libraries, which takes advantage of retroviral superinfection resistance. However, the dynamic features of RV-mediated transduction are not well characterized. Here, we engineered two murine stem cell virus-based retroviral vectors expressing dual fluorescence proteins and antibiotic markers, and analyzed virion production efficiency and virion stability, dynamic infectivity and superinfection resistance in different cell types, and strategies to improve transduction efficiency. We found that the highest virion production occurred between 60 and 72 h after transfection. The stability of the collected virion supernatant decreased by >60% after 3 days in storage. We found that RV infectivity varied drastically in the tested human cancer lines, while low transduction efficiency was partially overcome with increased virus titer, prolonged infection duration and/or repeated infections. Furthermore, we demonstrated that RV receptors PIT1 and PIT2 were lowly expressed in the analyzed cells, and that PIT1 and/or PIT2 overexpression significantly improved transduction efficiency in certain cell lines. Thus, our findings provide resourceful information for the optimal conditions of retroviral-mediated gene delivery.

A general method to eliminate laboratory induced recombinants during massive, parallel sequencing of cDNA library.

BACKGROUND: Massive, parallel sequencing is a potent tool for dissecting the regulation of biological processes by revealing the dynamics of the cellular RNA profile under different conditions. Similarly, massive, parallel sequencing can be used to reveal the complexity of viral quasispecies that are often found in the RNA virus infected host. However, the production of cDNA libraries for next-generation sequencing (NGS) necessitates the reverse transcription of RNA into cDNA and the amplification of the cDNA template using PCR, which may introduce artefact in the form of phantom nucleic acids species that can bias the composition and interpretation of original RNA profiles. METHOD: Using HIV as a model we have characterised the major sources of error during the conversion of viral RNA to cDNA, namely excess RNA template and the RNaseH activity of the polymerase enzyme, reverse transcriptase. In addition we have analysed the effect of PCR cycle on detection of recombinants and assessed the contribution of transfection of highly similar plasmid DNA to the formation of recombinant species during the production of our control viruses. RESULTS: We have identified RNA template concentrations, RNaseH activity of reverse transcriptase, and PCR conditions as key parameters that must be carefully optimised to minimise chimeric artefacts. CONCLUSIONS: Using our optimised RT-PCR conditions, in combination with our modified PCR amplification procedure, we have developed a reliable technique for accurate determination of RNA species using NGS technology.

A GMP-compliant protocol to expand and transfect cancer patient T cells with mRNA encoding a tumor-specific chimeric antigen receptor.

Chimeric antigen receptors (CARs), which combine an antibody-derived binding domain (single chain fragment variable) with T-cell-activating signaling domains, have become a promising tool in the adoptive cellular therapy of cancer. Retro- and lenti-viral transductions are currently the standard methods to equip T cells with a CAR; permanent CAR expression, however, harbors several risks like uncontrolled auto-reactivity. Modification of T cells by electroporation with CAR-encoding RNA to achieve transient expression likely circumvents these difficulties. We here present a GMP-compliant protocol to activate and expand T cells for clinical application. The protocol is optimized in particular to produce CAR-modified T cells in clinically sufficient numbers under full GMP-compliance from late-stage cancer patients. This protocol allows the generation of 6.7 × 10(8) CAR-expressing T cells from one patient leukapheresis. The CAR-engineered T cells produced pro-inflammatory cytokines after stimulation with antigen-bearing tumor cells and lysed tumor cells in an antigen-specific manner. This functional capacity was maintained after cryopreservation. Taken together, we provide a clinically applicable protocol to transiently engineer sufficient numbers of antigen-specific patient T cells for use in adoptive cell therapy of cancer.

Effect of chitosan chain architecture on gene delivery: comparison of self-branched and linear chitosans.

Chitosan possesses many characteristics of an ideal gene delivery system. However, the transfection efficiency of conventional chitosans is generally found to be low. In this study, we investigated the self-branching of chitosans as a strategy to improve its gene transfer properties without compromising its safety profile. Self-branched (SB) and self-branched trisaccharide-substituted (SBTCO) chitosans with molecular weights of 11-71 kDa were synthesized, characterized, and compared with their linear counterparts with respect to transfection efficiency, cellular uptake, formulation stability, and cytotoxicity. Our studies show that in contrast with unmodified linear chitosans that were unable to transfect HeLa cells, self-branched chitosans mediated high transfection efficiencies. The most efficient chitosan, SBTCO30, yielded gene expression levels two and five times higher than those of Lipofectamine and Exgen, respectively, and was nontoxic to cells. Nanoparticles formed with SBTCO chitosans exhibited a higher colloidal stability of formulation, efficient internalization without excessive cell surface binding, and low cytotoxicity.

Reference standards for accurate validation and optimization of assays that determine integrated lentiviral vector copy number in transduced cells.

Lentiviral vectors (LV) have emerged as a robust technology for therapeutic gene delivery into human cells as advanced medicinal products. As these products are increasingly commercialized, there are concomitant demands for their characterization to ensure safety, efficacy and consistency. Standards are essential for accurately measuring parameters for such product characterization. A critical parameter is the vector copy number (VCN) which measures the genetic dose of a transgene present in gene-modified cells. Here we describe a set of clonal Jurkat cell lines with defined copy numbers of a reference lentiviral vector integrated into their genomes. Genomic DNA was characterized for copy number, genomic integrity and integration coordinates and showed uniform performance across independent quantitative PCR assays. Stability studies during continuous long-term culture demonstrated sustained renewability of the reference standard source material. DNA from the Jurkat VCN standards would be useful for control of quantitative PCR assays for VCN determination in LV gene-modified cellular products and clinical samples.

Optimization of square-wave electroporation for transfection of porcine fetal fibroblasts.

Development of a transgenic porcine biomedical research model requires effective delivery of DNA into the donor cell followed by selection of genetically modified somatic cell lines to be used for nuclear transfer. The objective of the current study was 2-fold: (1) to compare the effectiveness of a single 1 ms pulse of different voltages (V; 100, 150, 200, 250, 300, 350) and multiple 1 ms pulses (1, 2, 3, 4 or 5) at 300 V for delivery and expression of super-coiled GFP vector in surviving cells of three fetal fibroblast cell lines, and (2) to determine the ability of these electroporation parameters to produce stably transfected fibroblast colonies following G418 selection. Cell line (P < 0.001) and voltage (P < 0.001) affected DNA delivery into the cell as assessed by GFP expression while survival at 24 h was affected by voltage (P < 0.001) and not by cell line (P = 0.797). Using a single pulse while increasing voltage resulted in the percentage of GFP expressing cells increasing from 3.2 +/- 0.8% to 43.0 +/- 3.4% while survival decreased from 90.5 +/- 8.0% to 44.8 +/- 2.0%. The number of pulses at 300 V significantly affected survival (P < 0.001) and GFP expression (P < 0.001). Survival steadily decreased following 1-5 pulses from 63.2 +/- 6.3% to 3.0 +/- 0.3% with GFP expression of surviving cells increasing from 35.6 +/- 2.67% to 71.4 +/- 6.1%. Electroporation of a selectable marker at a 1:1 copy number ratio to a co-electroporated transgene resulted in 83% of G418 resistant colonies also being PCR positive for the secondary transgene. These electroporation conditions, specifically, three 1 ms pulses of 300 V to 200 muL of 1 x 10(6) cells/mL in the presence of 12.5 mug DNA/mL effectively introduced DNA into somatic cells. The utilization of these conditions produced numerous transgenic fibroblast colonies following G418 selection that when used for somatic cell nuclear transfer resulted in the production of live offspring.

Charge density and molecular weight of polyphosphoramidate gene carrier are key parameters influencing its DNA compaction ability and transfection efficiency.

A series of polyphosphoramidates (PPAs) with different molecular weights (MWs) and charge densities were synthesized and examined for their DNA compaction ability and transfection efficiency. A strong correlation was observed between the transfection efficiency of PPA/DNA nanoparticles and the MW and net positive charge density of the PPA gene carriers in three different cell lines (HeLa, HEK293, and HepG2 cells). An increase in MW and net positive charge density of PPA carrier yielded higher DNA compaction capacity, smaller nanoparticles with higher surface charges, and higher complex stability against challenges by salt and polyanions. These favorable physicochemical properties of nanoparticles led to enhanced transfection efficiency. PPA/DNA nanoparticles with the highest complex stability showed comparable transfection efficiency as PEI/DNA nanoparticles likely by compensating the low buffering capacity with higher cellular uptake and affording higher level of protection to DNA in endolysosomal compartment. The differences in transfection efficiency were not attributed by any difference in cytotoxicity among the carriers, as all nanoparticles showed a minimal level of cytotoxicity under the transfection conditions. Using PPA as a model system, we demonstrated the structural dependence of transfection efficiency of polymer gene carrier. These results offer more insights into nanoparticle engineering for nonviral gene delivery.

Effect of lipid composition on the structure and theoretical phase diagrams of DC-Chol/DOPE-DNA lipoplexes.

Lipoplexes constituted by calf-thymus DNA (CT-DNA) and mixed cationic liposomes consisting of varying proportions of the cationic lipid 3ß-[N-(N',N'-dimethylaminoethane)-carbamoyl]cholesterol hydrochloride (DC-Chol) and the zwitterionic lipid, 1,2-dioleoyl-sn-glycero-3-phosphoetanolamine (DOPE) have been analyzed by means of electrophoretic mobility, SAXS, and fluorescence anisotropy experiments, as well as by theoretically calculated phase diagrams. Both experimental and theoretical studies have been run at several liposome and lipoplex compositions, defined in terms of cationic lipid molar fraction, α, and either the mass or charge ratios of the lipoplex, respectively. The experimental electrochemical results indicate that DC-Chol/DOPE liposomes, with a mean hydrodynamic diameter of around (120 ± 10) nm, compact and condense DNA fragments at their cationic surfaces by means of a strong entropically driven electrostatic interaction. Furthermore, the positive charges of cationic liposomes are compensated by the negative charges of DNA phosphate groups at the isoneutrality L/D ratio, (L/D)(ϕ), which decreases with the cationic lipid content of the mixed liposome, for a given DNA concentration. This inversion of sign process has been also studied by means of the phase diagrams calculated with the theoretical model, which confirms all the experimental results. SAXS diffractograms, run at several lipoplex compositions, reveal that, irrespectively of the lipoplex charge ratio, DC-Chol/DOPE-DNA lipoplexes show a lamellar structure, L(α), when the cationic lipid content on the mixed liposomes α ≥ 0.4, while for a lower content (α = 0.2) the lipoplexes show an inverted hexagonal structure, H(II), usually related with improved cell transfection efficiency. A similar conclusion is reached from fluorescence anisotropy results, which indicate that the fluidity on liposome and lipoplexes membrane, also related with better transfection results, increases as long as the cationic lipid content decreases.

Establishment of a stable transfection method in Babesia microti and identification of a novel bidirectional promoter of Babesia microti.

Babesia microti, an emerging human pathogen, is primarily transmitted through a bite of an infected tick and blood transfusions in human. Stable transfection technique has been reported in many protozoan parasites over the past few years. However, in vivo transient and stable transfection method has not been established for Babesia microti. Here, for the first time, we present a method of transient as well as stable transfection of the Babesia microti (B. microti) in the in vivo conditions. We have identified a novel promoter of B. microti. We also demonstrated that Plasmodium berghei DHFR promoter is recognized and functional in B. microti. We show that BM-CTQ41297 promoter control the expression of two genes, which are present on either side and thus represents a bi-functional promoter in B. microti. The predicted promoter activity values using Promoter 2.0 program is higher for BM- CTQ41297 promoter than strong promoters such as ß-actin, ef-1ß, and many other promoters. Furthermore, we discovered a non-essential locus for the genetic manipulation of the parasite, allowing us to stably integrate foreign genes; GFP, mCherry, into the B. microti. The transfection using an electroporation method and genetic manipulation of B. microti is now achievable and it is possible to obtain transfected viable parasites under in vivo growing conditions. The growth curve analysis of transfected and WT B. microti are similar indicating no defects in the transgenic parasites. This study will enable other researchers in understanding the B. microti biology, host modulation and diverse parasite developmental stages using reverse genetics and holds great potential to identify novel drug targets and vaccine development.

Automated high-throughput siRNA transfection in raw 264.7 macrophages: a case study for optimization procedure.

RNAi using siRNA is a very powerful tool for functional genomics to identify new drug targets and biological pathways. Although their use in epithelial cells is relatively easy and straightforward, transfection in other cell types is still challenging. The authors report the optimization of transfection conditions for Raw 267.4 macrophage cells. The herein described procedure makes use of automated confocal microscopy, enhanced green fluorescent protein (EGFP)-expressing macrophages, and fluorescently labeled siRNAs to simultaneously quantify both siRNA uptake and silencing efficiency. A comparison of 10 commercial transfectants was performed, leading to the selection of the transfectant giving the highest reproducible knock-down effect without inducing cell toxicity or cell activation. Several buffers used for siRNA/lipid complex assembly were tested, and such a study revealed the crucial importance of this parameter. In addition, a kinetics study led to the determination of the optimal siRNA concentration and the best time window for the assay. In an original approach aimed at simultaneously optimizing both the high-throughput screening process and biological factors, optimal reagent volumes and a process flowchart were defined to ensure robust silencing efficiencies during screening. Such an account should pave the way for future genome-wide RNAi research in macrophages and present an optimization procedure for other "hard-totransfect" cell lines.

Dual fluorescent labeling method to visualize plasmid DNA degradation.

The efficiency of nonviral vectors for gene delivery may be enhanced by understanding the key barriers that limit the translocation of the therapeutic DNA into the nucleus. One such barrier is the instability of DNA in the cytoplasm. In this work, we have developed a method to dual-label plasmid DNA to be utilized as a tool to elucidate DNA instability during its trafficking in the intracellular microenvironment. Plasmid DNA containing rhodamine and maleimide groups linked using peptide nucleic acid (PNA) linkers was utilized for conjugation. Covalent conjugation of the maleimide group with a second fluorophore, fluorescein, did not alter the electrophoretic mobility or the structural integrity of the DNA, as confirmed by gel electrophoresis. The intact DNA was visualized as a single color (yellow) due to the close proximity of the green and red fluorophores. DNA degradation was simulated using restriction endonucleases (BamH1 and PflMI) to cut the DNA at two or more sites resulting in color separation. Confocal time-lapse imaging was utilized to follow DNA stability upon incubation of Lipofectamine2000/dual-labeled DNA complexes in CHO-K1 cells. Yellow fluorescent voxels were seen in the cell cytoplasm indicating the presence of intact DNA. Red and green fluorescent voxels were also seen in a few cells, suggesting separation of the fluorophores and probable DNA degradation. The methodology developed in this report provides a new tracking tool for investigators to explore DNA degradation at the molecular level inside single cell.

Triazine dendrimers as nonviral gene delivery systems: effects of molecular structure on biological activity.

A family of generation 1, 2, and 3 triazine dendrimers differing in their core flexibility was prepared and evaluated for their ability to accomplish gene transfection. Dendrimers and dendriplexes were analyzed by their physicochemical and biological properties such as condensation of DNA, size, surface charge, morphology of dendriplexes, toxic and hemolytic effects, and ultimately transfection efficiency in L929 and MeWo cells. Flexibility of the backbone was found to play an important role with generation 2 dendrimer displaying higher transfection efficiencies than 25 kDa poly(ethylene imine) or SuperFect at a lower cytotoxicity level. This result is surprising, as PAMAM dendrimers require generations 4 or 5 to become effective transfection reagents. The ability to delineate effects of molecular structure and generation of triazine dendrimers with biological properties provides valuable clues for further modifying this promising class of nonviral delivery system.

Cationic glyconanoparticles: their complexation with DNA, cellular uptake, and transfection efficiencies.

There is a need to synthesize new gene delivery vehicles that can deal with the problems of endosomal escape and nuclear entry. We propose cationic glycopolymer-stabilized gold nanoparticles as an effective gene delivery system. The cationic glyconanoparticles synthesized were revealed to be biocompatible and are resistant to aggregation in physiological conditions. The complexation of DNA to the cationic glyconanoparticles is determined by agarose gel electrophoresis. The localization of the DNA-glyconanoparticles inside the Hela cell line and their mechanism of uptake is studied by confocal microscopy. Finally, the efficacy of the glyconanoparticles as gene delivery vehicles in vitro is studied by their complexation with cyanine fluorescence protein encoded plasmid, and the transfection efficiency is found to be comparable to the commercially available control Lipofectamine 2000.

High transfection efficiency and low toxicity cationic lipids with aminoglycerol-diamine conjugate.

The solid phase synthesis of a library of aminoglycerol-diamine conjugate-based transfection agents having urea linkage between diverse length of diamines and various lengths of hydrophobic tails is described. These compounds were characterized and structure-activity relationships were determined for DNA binding and transfection ability when formulated as cationic liposomes. Cationic lipids with short spacer length and short hydrophobic tails bound to DNA and delivered DNA into HEK293 cells more efficient than those with longer ones. Transfection efficiency of some of the cationic liposomes was superior to that of the commercial transfection agents, Effectene, DOTAP and DC-Chol. The lipids 6Ab and 6Bb did not require the helper lipid DOPE to produce high-efficiency transfection of human cells while displaying minimal cytotoxicity. This suggests that these newly described aminoglycerol-based lipids should be very promising in liposome-mediated gene delivery and illustrate the potential of solid phase synthesis method for non-viral vector discovery.