Numerical simulation of experimental tests performed on ZAO® non-evaporable-getter pump designed for neutral beam injector applications.

ABSTRACT

Vacuum systems of neutral beam injectors have very demanding requirements in terms of pumping speed, throughput, and capacity. Due to their high affinity to hydrogenic species, porous sintered Non-Evaporable Getters (NEG) are a possible candidate for deployment in giant hydrogen ion sources and neutral beam injectors for fusion. This paper presents the numerical interpretation of experimental tests on a recently developed NEG cartridge, that is part of a modular pump under development for neutral beam injectors. The cartridge is composed of six stacks of ZAO® porous sintered NEG disks and a heater. It was tested under hydrogen loads relevant for neutral beam injectors, namely, at constant pressure or constant flow, such that the hydrogen pressure was in the range of 20 mPa-40 mPa. The result of the sorption test was reproduced by a three dimensional flow simulation in molecular regime to determine the actual pumping speed, the effective sticking coefficient, and the uniformity of the gas load on the various NEG disks. The procedure developed and the results obtained provide the basic understanding for interpreting the large-scale tests on the modular pump, consisting of 34 of these cartridges.