Photocatalytic degradation of an agro-industrial wastewater model compound using a UV LEDs system: kinetic study.

ABSTRACT

An ultraviolet light emitting diode (UV-A LED) system was built to test the capability of performing heterogeneous photocatalysis using TiO2 P25. The LEDs maximum wavelength is 365 nm with an irradiance power of 85 W m-2. The device was tested in batch and continuous (CSTR) mode in a laboratorial scale reactor. The degradation of an agro-industrial wastewater model compound (p-hydroxybenzoic acid, pHBA) was investigated, assessing the effect of different experimental conditions such as pH, pHBA and TiO2 concentration keeping constant the UV-A LEDs power and temperature. The photodegradation of different concentrations of pHBA with [TiO2] = 500 mg L-1, IUV = 85 W m-2 and a T = 21 °C were analysed by pseudo-first order kinetics. The results were applied to the Langmuir-Hinshelwood model yielding kc = 0.885 mg L-1 min-1 and kLH = 0.217 L mg-1. In a comparative experiment the UV-A LEDs system showed faster kinetics (k = 0.0134 min-1) than solar radiation (IUV = 23 W m-2; k = 0.0077 min-1), with [pHBA] = 75 mg L-1 and [TiO2] = 500 mg L-1. The values of the Electric Energy per Order (EEO) = 115 kWh m-3 order-1 and the Specific Applied Energy (ESAE) = 318 kWh mol-1 order-1 were obtained with [TiO2] = 1000 mg L-1 and [pHBA] = 50 mg L-1. Analogous results were obtained ([TiO2] = 500 mg L-1) in a CSTR with a slight decrease in the first order kinetic constant due to the "non-ideal" reactor from 0.0284 to 0.0158 min-1 and from 0.0143 to 0.00825 min-1 with [pHBA] = 50 mg L-1 and 75 mg L-1, respectively. This work shows that photocatalytic reactors with UV-A LEDs can advantageously replace conventional UV mercury lamps based reactors in the photodegradation of phenolic compounds.