Self-assembled silk fibroin cross-linked with genipin supplements microbial carbonate precipitation in building material.

The process of microbially induced carbonate precipitation (MICP) is known to effectively improve engineering properties of building materials and so does silk fibroin (SF). Thus, in this study, an attempt was taken to see the improvement in sand, that is, basic building material coupled with MICP and SF. Urease producing Bacillus megaterium was utilized for MICP in Nutri-Calci medium. To improve the strength of SF itself in bacterial solution, it was cross-linked with genipin at the optimized concentration of 3.12 mg/mL. The Fourier transform infrared (FTIR) spectra confirmed the crosslinking of SF with genipin in bacterial solution. In order to understand how such cross-linking can improve engineering properties, sand moulds of 50 mm3 dimension were prepared that resulted in 35% and 55% more compressive strength than the one prepared with bacterial solution with SF and bacterial solution only, respectively with higher calcite content in former one. The FTIR, SEM, x-ray powder diffraction spectrometry and x-ray photoelectron spectroscopy analyses confirmed higher biomineral precipitation in bacterial solution coupled with genipin cross-linked SF. As the process of MICP is proven to replace cement partially from concrete without negatively influence mechanical properties, SF cross-linked with genipin can provide additional significance in developing low-carbon cement-based composites.

Biomineralization in metakaolin modified cement mortar to improve its strength with lowered cement content.

The role of industrial byproduct as supplementary cementitious material to partially replace cement has greatly contributed to sustainable environment. Metakaolin (MK), one of such byproduct, is widely used to partial replacement of cement; however, during cement replacement at high percentage, it may not be a good choice to improve the strength of concrete. Thus, in the present study, biocement, a product of microbially induced carbonate precipitation is utilized in MK-modified cement mortars to improve its compressive strength. Despite of cement replacement with MK as high as 50%, the presented technology improved compressive strength of mortars by 27%, which was still comparable to those mortars with 100% cement. The results proved that biomineralization could be effectively used in reducing cement content without compromising compressive strength of mortars. Biocementation also reduced the porosity of mortars at all ages. The process was characterized by SEM-EDS to observe bacterially-induced carbonate crystals and FTIR spectroscopy to predict responsible bonding in the formation of calcium carbonate. Further, XRD analysis identified bio/minerals formed in the MK-modified mortars. The study also encourages combining biological role in construction engineering to solve hazardous nature of cement and at same time solve the disposal problem of industrial waste for sustainable environment.

A comparison of the potential health risk of aluminum and heavy metals in tea leaves and tea infusion of commercially available green tea in Jiangxi, China.

Heavy metals and Al in tea products are of increasing concern. In this study, contents of Al, Cd, Co, Cr, Cu, Ni, and Pb in commercially available green tea and its infusions were measured by ICP-MS and ICP-AES. Both target hazard quotient (THQ) and hazard index (HI) were employed to assess the potential health risk of studied metals in tea leaves and infusions to drinkers. Results showed that the average contents of Al, Cd, Co, Cr, Cu, Ni, and Pb in tea leaves were 487.57, 0.055, 0.29, 1.63, 17.04, 7.71, and 0.92 mg/kg, respectively. Except for Cu, metal contents were within their maximum limits (1, 5, 30, and 5 mg/kg for Cd, Cr, Cu, and Pb, respectively) of current standards for tea products. Concentrations of metals in tea infusions were all below their maximum limits (0.2, 0.005, 0.05, 1.0, 0.02, and 0.01 mg/L for Al, Cd, Cr(VI), Cu, Ni, and Pb, respectively) for drinking water, and decreased with the increase of infusion times. Pb, Cd, Cu, and Al mainly remained in tea leaves. The THQ from 2.33 × 10(-5) to 1.47 × 10(-1) and HI from1.41 × 10(-2) to 3.45 × 10(-1) values in tea infusions were all less than 1, suggesting that consumption of tea infusions would not cause significant health risks for consumers. More attention should be paid to monitor Co content in green tea. Both THQ and HI values decreased with the increase of infusion times. Results of this study suggest that tea drinkers should discard the first tea infusion and drink the following infusions.

Potential for nutrient removal by integrated remediation methods in a eutrophicated artificial lake - a case study in Dishui Lake, Lingang New City, China.

A new integrated water remediation technology, including a floating bed, a buffer zone of floating plants, enclosed 'water hyacinth' purification, economic aquatic plants and near-shore aquatic plant purification, was used in Dishui Lake to improve its water quality. A channel of 1,000 m length and 30 m width was selected to implement pilot-scale experiments both in the static period and the continuous water diversion period. The results showed that the new integrated water remediation technology exhibited the highest removal rate for permanganate index in a static period, which achieved 40.6%. The average removal rates of total nitrogen (TN), ammonia nitrogen (NH3-N) and total phosphorus (TP) in a static period were 23.2, 21.6 and 19.1%, respectively. However, it did not exhibit an excellent removal rate for pollutants in the continuous water diversion period. The average removal rates for all pollutants were below 10%. In winter, the new integrated remediation technology showed efficient effects compared to others. The average removal rate for CODMn, TN, NH3-N and TP were 7, 5.3, 7.6 and 6.5%, respectively. Based on our results, the new integrated water remediation technology was highly efficient as a purification system, especially during the static period in winter.

Influence of calcium sources on microbially induced calcium carbonate precipitation by Bacillus sp. CR2.

Stimulation of microbially induced calcium carbonate precipitation (MICCP) is likely to be influenced by calcium sources. In order to study such influences, we performed MICCP using Bacillus sp. CR2 in nutrient broth containing urea, supplemented with different calcium sources (calcium chloride, calcium oxide, calcium acetate and calcium nitrate). The experiment lasted 7 days, during which bacterial growth, urease activity, calcite production and pH were measured. Our results showed that calcium chloride is the better calcium source for MICCP process, since it provides higher urease activity and more calcite production. The influences of calcium sources on MICCP were further studied using Fourier transform-infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. These analyses confirmed that the precipitate formed was CaCO3 and composed of predominantly calcite crystals with a little amount of aragonite and vaterite crystals. The maximum yield of calcite precipitation was achievable with calcium chloride followed by calcium nitrate as a calcium source. The results of present study may be applicable to media preparation during efficient MICCP process.