Investigating the effect of supplementing different levels of Isochrysis galbana on in vitro rumen fermentation parameters.

This study aimed to investigate the effect of supplementing Isochrysis galbana (I. galbana) at levels of 0 (control), 1, 2, 3, 4, and 5 (g/100 g DM) of the diet on the gas production kinetics, methane production, rumen fermentation parameters, and relative microbial population in vitro. Supplementation of I. galbana at high level (5 g/100 g DM) caused a significant decrease in total gas production (p < 0.05). High supplementation rates (4 and 5 g/100 g DM) decreased CH4 production relative to the control by 18.4% and 23.2%, respectively. Although rumen ammonia nitrogen (N-NH3) and total volatile fatty acids (VFA) concentrations were affected by dietary treatments, but the VFA profile did not changed. The relative proportion of protozoa and methanogenic archaea as well as Anaerovibrio lipolytica, Prevotella spp., Ruminococcus flavefaciens, and Fibrobacter succinogenes were decreased significantly as a result of microalgae supplementation. However, the relative abundance of Ruminococcus albus, Butyrivibrio fibrisolvens and Selenomonas ruminantium were significantly increased (p < 0.05), related to the control group. As well, the pH was not affected by dietary treatments. It was concluded that I. galbana reduced in vitro CH4 production and methanogenic archaea that its worth to be investigated further in in vivo studies.

Optimization of bacterial cellulose production by Komagataeibacter xylinus PTCC 1734 in a low-cost medium using optimal combined design.

This study was aimed to optimize the production of bacterial cellulose (BC) by Komagataeibacter xylinus PTCC 1734 using mixture of date syrup and cheese whey as carbon sources as well as ascorbic acid as a supplementary agent and to characterize the properties of produced BC. The results showed the highest BC production on the 10th day. The 50:50 ratio of date syrup and cheese whey lead to the highest BC production. Three samples were selected in optimal cultivation conditions until the 10th day, with different ascorbic acid concentrations (0, 0.1 and 0.4%). SEM results showed no difference in the morphology of BC product in the optimal samples, where the average diameter of cellulose nanofibers produced was in the range of nanometer. The FTIR test results showed no difference in the chemical structure of cellulose product in different ascorbic acid concentrations. According to XRD and TGA analyses, the highest degree of BC crystallinity and thermal resistance was obtained at maximum ascorbic acid concentration (0.04%). Consequently, the 50:50 ratio of date syrup and cheese whey and 10th day of fermentation time were selected as the best conditions for BC production. Though ascorbic acid reduced production efficiency, it improved the physical properties of the BC product.

Simultaneous green synthesis and in-situ impregnation of silver nanoparticles into organic nanofibers by Lythrum salicaria extract: Morphological, thermal, antimicrobial and release properties.

This research has revealed the promising, green and one-pot approach for fabrication of antimicrobial nanohybrids based on organic nanofibers including cellulose (CNF), chitosan (CHNF), and lignocellulose (LCNF) nanofibers impregnated with silver nanoparticles (AgNPs). Lythrum salicaria extract was used as a reducing agent as well as a capping agent. Formation of the spherical AgNPs ranging between 45 and 65 nm was proved by UV-Vis spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS). Biomaterials supported AgNPs were characterized and compared for their morphological, thermal, release, and antimicrobial properties. The considerable influence of the phenolic compounds of L.salicaria extract on the synthesis and uniform distribution of AgNPs on nanofibers was confirmed by field emission electron microscopy (FE-SEM). Energy dispersive X-ray spectroscopy (EDX) and ICP-OES analysis of nanohybrids, reflected a high loading capacity for LCNF and also CHNF in contrast to CNF. The release of AgNPs from LCNF substrate was lower than other nanofibers but the order of antimicrobial activity of nanohybrids against E.coli and S.aureus was as this: CHNF ˃ LCNF ˃ CNF. Generally, this research suggested that the efficiency of CHNF and LCNF as immobilizing support of AgNPs is higher than CNF and L.salicaria extract was proposed as a high potential reducing and capping agent.

Development and characterization of kefiran - Al2O3 nanocomposite films: Morphological, physical and mechanical properties.

Biodegradable kefiran films, containing different concentrations of Al2O3 (alumina) (1, 3 and 5% w/w), were prepared by casting method and their physical, mechanical, and thermal properties were studied. Based on the results, the increase of the nano-Al2O3 content led to a decrease in the water vapor permeability, moisture content, moisture absorption, and water solubility. The addition of nanoparticles did not affect the lightness of the films significantly (P > 0.05). The mechanical tests revealed that the addition of Al2O3 nanoparticles to the kefiran films significantly increased both tensile strength and elastic modulus, while had no effect on the elongation at break (P > 0.05). Thermogravimetric analysis (TGA) indicated the improvement of the films' thermal stability by adding alumina. The results of X-ray diffraction (XRD) confirmed the effect of Al2O3 on the semi-crystalline structure of kefiran. Scanning electron microscopy (SEM) images approved a uniform distribution of nanocomposites containing 1 and 3% w/w of Al2O3. The obtained results suggested that Al2O3 was able to improve the characteristics of the kefiran-based films for using as food packaging material.

Optimization of Ziziphora clinopodiodes essential oil microencapsulation by whey protein isolate and pectin: A comparative study.

The performance of whey protein isolate (WPI) and pectin as wall materials in encapsulation of Ziziphora clinopodiodes essential oil by ultrasonication method was compared. In this regard, using the response surface methodology, the influence of ultrasonication (US) power (50-150W) and core-coating ratio (10-100%) on the properties of microcapsules was evaluated. Increasing US power and core-coating ratio, caused to increase and decrease the particle size, respectively. The polydispersity index (PDI) of WPI coated microcapsules was increased by increasing of US power. The Zeta potential values were increased by increasing of core-coating ratio. Also, the effect of core-coating ratio on encapsulation efficiency was more than US power. Morphological studies by SEM on optimized microcapsules showed regular spherical shapes. X-ray diffraction analysis revealed that the type of the wall material had no effect on the structural properties of the microparticles. FT-IR analysis confirmed the pronounced effect of electrostatic interactions in the formation of microcapsules.

Physicochemical properties of Carum copticum essential oil loaded chitosan films containing organic nanoreinforcements.

The aim of this research was to prepare of bionanocomposite films based on chitosan (CH) incorporated with Carum copticum essential oil and reinforced with cellulose nanofibers (CNF) or lignocellulose nanofibers (LCNF). The FTIR analysis showed new interactions in bionanocomposites. AFM and SEM analyses showed an increased roughness for bionanocomposites but suggested good dispersion of CNF and LCNF in CH matrix. X-ray diffraction confirmed that the degree of crystallinity was increased by addition of CNF/LCNF. The results suggested that the CH-EO film had high antioxidant activity and was more effective against E. coli and B. cereus bacteria than CH-EOCNF and CH-EO-LCNF films, which shows the release controlling effect of nanofibers. Mechanical properties were improved with addition of EO and CNF/LCNF. Incorporation of EO and CNF/LCNF improved water vapor barrier properties of films. In general, uniform dispersion and improving effect of LCNF on properties of CH-EO films was more than CNF.

Development of bacterial cellulose based slow-release active films by incorporation of Scrophularia striata Boiss. extract.

Novel bacterial cellulose (BC) based monolayer and multilayer films, incorporating 5wt.% Scrophularia striata Boiss. extract (SE) were obtained. The effect of lamination and ß-cyclodextrin (ß-CD) inclusion complexation of SE on morphological, physical, antioxidant and release properties of films were investigated. FT-IR results reflected that some new interactions have occurred between BC and ß-CD. The XRD analyses showed a decrease in diffraction intensities of BC by addition of free SE. SEM results indicated that the intrinsic compactness of the BC film was preserved by addition of SE/ß-CD complex. Lamination and SE/ß-CD addition enhanced the mechanical properties. SE loaded films exhibited a good antioxidant activity. Release studies indicated that the release rate and diffusion coefficient (D) of SE in 95% ethanol simulant were significantly decreased by lamination and complexation of SE with ß-CD. Results suggest that SE loaded BC films may be used as controlled release antioxidant food active packaging.

Synergistic reinforcing effect of TiO2 and montmorillonite on potato starch nanocomposite films: Thermal, mechanical and barrier properties.

In this study, ternary potato starch (PS) bionanocomposite films containing two types of nanoparticles, sodium montmorillonite (MMT), one-dimensional (1D) clay platelets, (3 and 5wt%) and TiO2, three-dimensional (3D) nanospheres, (0.5, 1 and 2wt%), are prepared using solvent casting method. X-ray diffraction (XRD) test confirms the completely exfoliated structure formed in the PS-MMT nanocomposites containing 3 and 5% MMT. The success of the formation of new hydrogen bonds between the hydroxyl groups of starch and nanofillers is confirmed by Fourier transform infrared (FTIR) spectroscopy. Tensile strength (TS), elongation at break (EB), glass transition temperature (Tg), and melting point (Tm) of the films are also enhanced after MMT and TiO2 incorporation. The water vapor permeability (WVP) and the visible, UVA, UVB and UVC lights transmittance decreases upon TiO2 and MMT content increasing. Generally, a synergistic effect is observed between MMT and TiO2 at lower concentrations of MMT.

Characterization of chitosan-nanoclay bionanocomposite active films containing milk thistle extract.

Nowadays, bio-based and antioxidant active packaging is attracting significant attention as one of the preferred emerging technologies to prevent sensitive oxidation of foods. In this study, chitosan/nanoclay nanocomposite active films containing three different levels of sodium montmorillonite (MMT) (1, 3 and 5% w/w based on chitosan) and Silybum marianum L. extract (SME) (0.5, 1 and 1.5% v/v) were prepared. The obtained films were characterized in terms of structural, thermal, mechanical, and barrier properties as well as antioxidant behavior. X-ray diffraction patterns confirmed the exfoliated dispersion form of MMT nanolayers. Scanning electron microscopy images showed an increase in films' surface roughness by the addition of MMT. The results indicated that water vapor permeability and solubility of films reduced significantly (p<0.05) by incorporation of MMT and SME. The mechanical and optical properties of films were significantly affected by the content of MMT and SME (p<0.05). Antioxidant properties of the films also were improved by SME incorporation, suggesting that the formulated bionanocomposites could be considered as a promising antioxidant active packaging material.

Development of a novel controlled-release nanocomposite based on poly(lactic acid) to increase the oxidative stability of soybean oil.

A poly(lactic acid) (PLA)-based nanocomposite active packaging was developed for the controlled release of tert-butylhydroquinone (TBHQ) antioxidant. The PLA-based active films were loaded with only TBHQ (3% wt) or a mixture of modified cellulose nanofibre (MCNF) (8% wt) and TBHQ (3% wt) to obtain active and nanocomposite active films, respectively. Release studies indicated that the release rate of TBHQ in 95% ethanol simulant was significantly decreased by the addition of MCNF. Moreover, the presence of MCNF diminished the increasing effect of temperature on the release rate as when storage temperature increased from 4°C to 40°C. The diffusion coefficient (D) for PLA-TBHQ and PLA-MCNF-TBHQ films increased from 6.75 and 4.34 × 10(-8) cm(2) s(-1) to 19.85 and 8.49 × 10(-8) cm(2) s(-1), respectively. Diffusion of TBHQ to soybean oil was enough to delay the induction of the oxidation of soybean oil stored for 6 months in contact with PLA-based films. Antioxidative activity of PLA-based active films considerably increased with increasing storage time as indicated by the increase in 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity and the oxidative stability index (p < 0.05). This study demonstrates that effective controlled release antioxidant packaging could be obtained by using MCNF nanofiller, which leads to prolonged activity and an extended shelf-life in fatty foods.