ABSTRACT
An effective way to reduce herbicide quantity is to use adjuvants in order to optimize the amount of herbicide and improve its control efficiency. In order to screen for efficient herbicide tank-mix adjuvants, improve the control of weeds in maize fields, reduce the amount of effective ingredients, and improve the adsorption and digestion behavior of herbicides in soil, this study evaluated the synergistic effects and soil behavior of four types of tank-mix adjuvants combined with herbicides. Different types of adjuvants can enhance herbicide production. Surface tension was significantly reduced by 13% after the pesticide solution was applied with AgroSpred™ Prime. The contact angle with the foliar surface was significantly reduced and solution wettability improved using Atp Lus 245-LQ-(TH). The permeability of topramezone and atrazine in leaves of Amaranthus retroflexus L. and Digitaria sanguinalis (L.) Scop. was increased by 22-96% after adding either tank-mix adjuvant. The solution drying time and maximum retention on leaves were not affected by the tank-mix adjuvants. Ethyl and methylated vegetable oils can reduce the adsorption of topramezone in the soil, thus reducing its half-life in soil. The tank-mix adjuvants had no significant effect on soil dissipation or adsorption of atrazine. AgroSpred™ Prime and Atp Lus 245-LQ-(TH) have the best synergistic effect on topramezone and atrazine in the control of A. retroflexus L. and D. sanguinalis (L.) Scop. in maize fields.
Subject(s)
Atrazine , Herbicides , Pyrazoles , Herbicides/analysis , Adjuvants, Immunologic , Soil , Zea mays , Adenosine TriphosphateABSTRACT
Besides generating vision, light modulates various physiological functions, including mood. While light therapy applied in the daytime is known to have anti-depressive properties, excessive light exposure at night has been reportedly associated with depressive symptoms. The neural mechanisms underlying this day-night difference in the effects of light are unknown. Using a light-at-night (LAN) paradigm in mice, we showed that LAN induced depressive-like behaviors without disturbing the circadian rhythm. This effect was mediated by a neural pathway from retinal melanopsin-expressing ganglion cells to the dorsal perihabenular nucleus (dpHb) to the nucleus accumbens (NAc). Importantly, the dpHb was gated by the circadian rhythm, being more excitable at night than during the day. This indicates that the ipRGCâdpHbâNAc pathway preferentially conducts light signals at night, thereby mediating LAN-induced depressive-like behaviors. These findings may be relevant when considering the mental health effects of the prevalent nighttime illumination in the industrial world.
Subject(s)
Circadian Rhythm/physiology , Circadian Rhythm/radiation effects , Depression/physiopathology , Light/adverse effects , Visual Pathways/physiology , Animals , Depression/etiology , Habenula/physiology , Habenula/radiation effects , Mice , Nucleus Accumbens/physiology , Nucleus Accumbens/radiation effects , Retinal Ganglion Cells/physiology , Retinal Ganglion Cells/radiation effects , Visual Pathways/radiation effectsABSTRACT
Light plays a pivotal role in the regulation of affective behaviors. However, the precise circuits that mediate the impact of light on depressive-like behaviors are not well understood. Here, we show that light influences depressive-like behaviors through a disynaptic circuit linking the retina and the lateral habenula (LHb). Specifically, M4-type melanopsin-expressing retinal ganglion cells (RGCs) innervate GABA neurons in the thalamic ventral lateral geniculate nucleus and intergeniculate leaflet (vLGN/IGL), which in turn inhibit CaMKIIα neurons in the LHb. Specific activation of vLGN/IGL-projecting RGCs, activation of LHb-projecting vLGN/IGL neurons, or inhibition of postsynaptic LHb neurons is sufficient to decrease the depressive-like behaviors evoked by long-term exposure to aversive stimuli or chronic social defeat stress. Furthermore, we demonstrate that the antidepressive effects of light therapy require activation of the retina-vLGN/IGL-LHb pathway. These results reveal a dedicated retina-vLGN/IGL-LHb circuit that regulates depressive-like behaviors and provide a potential mechanistic explanation for light treatment of depression.
Subject(s)
Depression , Depressive Disorder/therapy , GABAergic Neurons/physiology , Geniculate Bodies/physiology , Habenula/physiology , Phototherapy , Retinal Ganglion Cells/physiology , Visual Pathways/physiology , Animals , Behavior, Animal , Calcium-Calmodulin-Dependent Protein Kinase Type 2/metabolism , Disease Models, Animal , GABAergic Neurons/metabolism , Male , Neural Inhibition/physiology , Neurons/metabolism , Neurons/physiology , Retina/physiology , Rod Opsins/metabolism , Stress, Psychological , Thalamus/physiologyABSTRACT
STUDY DESIGN: Experimental Animal Model. PURPOSE: The aim of our study was to validate a pure bilateral ovariectomy (OVX) female New Zealand white rabbit model of postmenopausal osteoporosis utilizing animal-sparing in vivo techniques for evaluating bone mineral density (BMD). We also sought to demonstrate that bilateral OVX in female New Zealand white rabbits can produce diminished BMD in the spinal column and simulate osteoporosis, without the need for adjuvant chemotherapeutic agents (i.e., no additional glucocorticosteroids or other drugs were used for stimulating accelerated BMD loss), which can be assessed by in vivo BMD testing. OVERVIEW OF LITERATURE: Multiple animal models of postmenopausal osteoporosis have been described. Rat ovariectomy models have been successful, but are limited by rats' inability to achieve true skeletal maturity and a slight morphology that limits surgical instrumentation. Rabbit models have been described which do not have these limitations, but previous models have relied on adjunctive steroid therapy to achieve osteoporosis and have required animal sacrifice for bone mineral density assessment. METHODS: Thirty-six skeletally mature female rabbits underwent bilateral OVX. BMD was measured using dual-energy X-ray absorptiometry on the metaphysis of the proximal tibia and distal femur, at baseline and 17 weeks postoperatively. RESULTS: Mean BMD values were significantly reduced by 21.9% (p<0.05) in the proximal tibia and 11.9% (p<0.001) in the distal femur at 17 weeks. CONCLUSIONS: This study is the first to demonstrate a significant bone loss within four months of pure OVX in rabbits using animal-sparing validation techniques. We believe that this OVX model is safe, reproducible, and can be employed to longitudinally evaluate the effect of anti-osteoporosis therapeutics and surgical interventions.
ABSTRACT
The purpose of the study was to test a novel treatment that carbodiimide-derivatized-hyaluronic acid-lubricin (cd-HA-lubricin) combined cell-based therapy in an immobilized flexor tendon repair in a canine model. Seventy-eight flexor tendons from 39 dogs were transected. One tendon was treated with cd-HA-lubricin plus an interpositional graft of 8 × 10(5) BMSCs and GDF-5. The other tendon was repaired without treatment. After 21 day of immobilization, 19 dogs were sacrificed; the remaining 20 dogs underwent a 21-day rehabilitation protocol before euthanasia. The work of flexion, tendon gliding resistance, and adhesion score in treated tendons were significantly less than the untreated tendons (p < 0.05). The failure strength of the untreated tendons was higher than the treated tendons at 21 and 42 days (p < 0.05). However, there is no significant difference in stiffness between two groups at day 42. Histologic analysis of treated tendons showed a smooth surface and viable transplanted cells 42 days after the repair, whereas untreated tendons showed severe adhesion formation around the repair site. The combination of lubricant and cell treatment resulted in significantly improved digit function, reduced adhesion formation. This novel treatment can address the unmet needs of patients who are unable to commence an early mobilization protocol after flexor tendon repair.
Subject(s)
Bone Marrow Transplantation , Glycoproteins/therapeutic use , Growth Differentiation Factor 5/therapeutic use , Hand Injuries/surgery , Hyaluronic Acid/analogs & derivatives , Tendon Injuries/surgery , Animals , Dogs , Drug Evaluation, Preclinical , Hand Injuries/drug therapy , Hyaluronic Acid/therapeutic use , Random Allocation , Tendon Injuries/drug therapy , Transplantation, AutologousABSTRACT
OBJECTIVE: Augmented soft tissue mobilization (ASTM) has been used to treat Achilles tendinopathy and is thought to promote collagen fiber realignment and hasten tendon regeneration. The objective of this study was to evaluate the biomechanical and histological effects of ASTM therapy on rabbit Achilles tendons after enzymatically induced injury. METHODS: This study was a non-human bench controlled research study using a rabbit model. Both Achilles tendons of 12 rabbits were injected with collagenase to produce tendon injury simulating Achilles tendinopathy. One side was then randomly allocated to receive ASTM, while the other received no treatment (control). ASTM was performed on the Achilles tendon on postoperative days 21, 24, 28, 31, 35, and 38. Tendons were harvested 10 days after treatment and examined with dynamic viscoelasticity and light microscopy. RESULTS: Cross-sectional area in the treated tendons was significantly greater than in controls. Storage modulus tended to be lower in the treated tendons but elasticity was not significantly increased. Loss modulus was significantly lower in the treated tendons. There was no significant difference found in tangent delta (loss modulus/storage modulus). Microscopy of control tendons showed that the tendon fibers were wavy and type III collagen was well stained. The tendon fibers of the augmented soft tissue mobilization treated tendons were not wavy and type III collagen was not prevalent. CONCLUSION: Biomechanical and histological findings showed that the Achilles tendons treated with ASTM had better recovery of biomechanical function than did control tendons.
Subject(s)
Massage/methods , Tendinopathy/pathology , Tendinopathy/rehabilitation , Tendon Injuries/rehabilitation , Achilles Tendon , Animals , Biomechanical Phenomena , Biopsy, Needle , Disease Models, Animal , Elasticity/physiology , Immunohistochemistry , Male , Physical Therapy Modalities , Rabbits , Random Allocation , Reference Values , Tendon Injuries/pathology , Treatment OutcomeABSTRACT
OBJECTIVE: To study the influence of different drying methods on the quality of Schisandrae Chinensis Fructus and thus provide useful reference for its proper drying methods. METHOD: Schisandrae Chinensis Fructus was processed by eight drying methods including vacuum freeze drying, natural drying in the shade, drying in the sun, oven drying and vacuum drying under different temperature. The contents of the functional ingredients includes chisandrin, gomisin D, gomisin J, schisandrol B, angeloylgomisin H, angeloylgomisin Q, gomisin G, schisantherin A, deoxyschisandrin, schisandrin B, schisandrin C, 5-HMF, total aids and total sugars. The main components change after drying were analyzed by HPLC, ultraviolet spectrophotometry and potentiometric titration. Principal component analysis (PCA) was carried out by SPSS software to evaluate the quality of different processed products from Schisandrae Chinensis Fructus. RESULT: All these results are in accordance with the requirements of Chinese Pharmacopoeia published in 2010, the contents of schisandrin and total eleven lignans were the highest using vacuum drying, and 5-HMF were the lower, oven drying made little difference but with lower schisandrin and higher 5-HMF as the heat increased. CONCLUSION: Different drying methods have significant influence on the quality of Schisandrae Chinensis Fructus. Oven drying under 5°C should be adopted to substitute drying in the sun according to the China Pharmacopoeia published in 2010 for Schisandrae Chinensis Fructus by comprehensive analysis of the cost, content and practicality.
Subject(s)
Desiccation/methods , Drugs, Chinese Herbal/chemistry , Schisandra/chemistry , Quality Control , TemperatureABSTRACT
To separate and identify chemical signals which induce Thesium chinense haustorium formation, the components of T. chinense roots secretion collected with XAD-4 resin were detected by GC-MS. The effect of DMBQ as exogenous signals to induce haustorium formation in T. chinense was studied. Fifty-three compounds of 9 types had been detected, including hydrocarbons, esters, organic acids, ketones, alcohols, nitrogen containing compounds, phenolic acids, aldehyde and quinine. It is worth noting that the 2, 5-di-tert-butyl-1,4-benzoquinone has the core structure of 1,4-benzoquinone, which may play an important role in the parasitic relationship of Prunella vulgaris and T. chinense: DMBQ worked effectively on inducing haustoria, but induction effects vary widely in different concentrations. DMBQ with the concentration of 1 µmol x L(-1) showed the best effect of the inducing ability with a ratio of 110.52 when treated to induce haustoria.
Subject(s)
Magnoliopsida/chemistry , Plant Roots/chemistry , Gas Chromatography-Mass Spectrometry , Host-Parasite Interactions , Magnoliopsida/physiology , Plant Roots/physiology , Prunella/chemistry , Prunella/physiologyABSTRACT
OBJECTIVE: The purpose of this study was to quantify the biomechanical changes that occur in a compressed cervical disk with the application of axial distraction when the annular fiber orientation angles are varied between the horizontal and vertical planes. METHODS: A 3-dimensional finite element (FE) model of a cervical motion segment was developed. From this model, 3 FE models were developed and validated corresponding to 3 different fiber angles relative to the end plate-disk interface: +/-25 degrees (oriented toward the horizontal plane), +/-45 degrees (midway between the horizontal and vertical planes), and +/-65 degrees (oriented toward the vertical plane). Compression (50N), followed by an axial distraction (17N), was simulated. Annulus and nucleus stresses, von-Mises fiber stresses, annulus radial bulging, and nucleus radial displacement were computed. Hard tissue (cortical and cancellous bones and end plate) stresses were also quantified. RESULTS: With increasing fiber angle (toward vertical), axial segmental stiffness increased, whereas annulus and nucleus stresses, fiber stresses, annulus radial bulging, and nucleus radial displacement decreased. Similar outcomes were observed when axial distraction was applied to the compressed segment. Hard tissues were not affected with varying fiber angles; however, their mechanics changed when axial distraction was applied on the compressed segment. We noted lower disk stress in axial distraction than in compression. CONCLUSIONS: The results confirmed the hypothesis that fibers oriented toward the vertical plane reduce disk and fiber stresses and disk bulging. By aligning annular fibers toward the vertical plane axial distraction may help reduce disk and fiber stresses. Axial disk stresses decrease radially from outside to inside under compressive loading and that the anterior annulus is more stressed than the posterior-lateral annulus during both compression and distraction. Stresses decreased in both the annulus tissue matrix and fibers with increasing fiber angles and increasing fiber slope to 90 degrees (vertical fibers) is further anticipated to reduce the compressive disk stresses. The fibers in tension apply compression to the annulus tissue matrix, thus, decreasing annulus stresses in the axial and circumferential directions.
Subject(s)
Cervical Vertebrae/physiology , Finite Element Analysis , Manipulation, Chiropractic/methods , Osteogenesis, Distraction/methods , Posture , Stress, Mechanical , Biomechanical Phenomena/physiology , Fibrillar Collagens , Humans , Neck Pain/physiopathology , TractionABSTRACT
We designed and implemented an in vitro bench test to simulate and identify potential biomechanical causes for hip squeaking with alumina ceramic-on-ceramic bearing surfaces. All bearings were third-generation alumina ceramic with a 32-mm head coupled with a 56-mm acetabular component with a 32-mm ceramic insert. Conditions for testing were normal gait, high load, stripe wear, stripe wear in extreme load, metal transfer, edge wear with extreme load, and microfracture. Each condition was tested two times in dry conditions and two times in a lubricated condition with 25% bovine serum. Squeaking was reproduced in all dry conditions. It occurred quickly with high load, stripe wear, or metal transfer. Once squeaking occurred, it did not stop. Squeaking disappeared for all conditions when a small amount of lubricant was introduced. In lubricated conditions, squeaking was only reproduced for the material transfer condition. Our observations suggest squeaking is a problem of ceramic-ceramic lubrication and that this noise occurs when the film fluid between two surfaces is disrupted. Material (metal) transfer was the only condition that led to squeaking in a lubricated situation.
Subject(s)
Aluminum Oxide/chemistry , Ceramics/chemistry , Hip Prosthesis , Noise , Awards and Prizes , Equipment Failure Analysis , Lubricants/chemistry , Lubrication , Materials Testing , Prosthesis Design , Prosthesis Failure , Stress, Mechanical , Surface PropertiesABSTRACT
OBJECTIVE: To determine the effect of visual feedback on the propulsion effectiveness of experienced manual wheelchair users. DESIGN: Controlled trial. SETTING: A motion analysis laboratory. PARTICIPANTS: A convenience sample of 16 healthy men and 2 healthy women with T4-L2 traumatic paraplegia, a mean age of 38+/-9 years, and a mean duration of manual wheelchair-based mobility of 14+/-8 years. INTERVENTION: Propulsion was assessed as the subjects propelled an instrumented wheelchair (with and without visual biofeedback) on a custom-built dynamometer at propulsion intensities of .15 and .25W/kg for 10 minutes. MAIN OUTCOME MEASURES: The primary outcome variable was the fraction of effective force (FEF) (ie, the ratio of effective to total force) applied by the subject to the wheelchair's pushrim. Secondary variables included velocity, stroke frequency, and stroke angle. RESULTS: A 2-factor analysis of variance with repeated measurements was used to detect significant differences between the outcome variables. The FEF ratio was 73.9% without feedback and 72.5% with feedback at the lower-intensity level. Propulsion during the higher intensity condition both with and without feedback resulted in a statistically significant improvement in the FEF (73.9%-78.7% with no feedback, 72.5%-80.2% with feedback), compared with the lower-intensity level. Stroke angle increased from 84.3 degrees to 98.7 degrees and frequency decreased from 66 to 57.8 strokes/min with feedback. CONCLUSIONS: Visual biofeedback may have little utility in improving the force effectiveness of manual wheelchair propulsion in experienced wheelchair users. Experienced wheelchair users may have already optimized their stroke in a manner that balances energy expenditure with stroke efficiency. Other variables such as stroke length and frequency may be more amenable to visual biofeedback.