Analysis of endophyte diversity of two Gentiana plants species and the association with secondary metabolite.

BACKGROUND: The influence of external environmental factors on secondary metabolites of medicinal plants has always been studied. However, little is known about the relationships between endophytes and host metabolites, especially the relationship differences between different plant species. Thus, we used high-throughput sequencing methods to compare endophyte diversity from roots of two closely related species, Gentiana officinalis and G. siphonantha, from the same production area, and analyze the association with four secondary metabolites (Gentiopicroside, Loganic acid, Swertiamarine and Sweroside). RESULTS: The fungal and bacteria communities' richness and diversity of G. siphonantha was higher than G. officinalis. Ascomycota and Proteobacteria were dominant fungal and bacterial phylum of the two closely related species. At the genus level, Tetracladium and Cadophora were dominant fungal genus in G. officinalis and G. siphonantha samples, respectively. While Pseudomonas was dominant bacterial genus in two closely related species, with relative abundances were 8.29 and 8.05%, respectively. Spearman analysis showed that the content of loganic acid was significantly positively correlated with endophytic fungi, the content of gentiopicroside, swertiamarine and sweroside were significantly positively correlated with endophytic bacteria in the two related species. PICRUSt and FUNGuild predictive analysis indicated that metabolism and saprotroph was primary function of endophytic bacteria and fungi in the two related species. CONCLUSION: Our results will expand the knowledge on relationships of plant-microbe interactions and offer pivotal information to reveal the role of endophytes in the production of Gentiana plant and its important secondary metabolite.

Binding effect of fluorescence labeled glycyrrhetinic acid with GA receptors in hepatocellular carcinoma cells.

Glycyrrhetinic acid (GA) is a natural active component from licorice, which is broadly used in traditional Chinese medicine. Lots of glycyrrhetinic acid receptors (GA-R) are proved to locate on the surface of liver cells. Many reports about the hepatocellular carcinoma (HCC) treatment were dependent on GA modified carriers. However, the reality of GA-R in HCC cells was not clear. In this paper, 18ß-glycyrrhetinic acid (18ß-GA) was labeled with fluorescence (FITC) by chemical synthesis. Together with the binding effect of fluorescence labeled glycyrrhetinic acid (FITC-GA), the competitive action of 18ß-GA with GA-R was investigated in HCC cells. The results showed that in HepG2 cells, 18ß-GA and FITC-GA presented similar cytotoxicity. The specific binding saturation of GA showed the dissociation constant (Kd) was 7.457±2.122pmol/L and the maximum binding counts (Bmax) was 2.385±0.175pmol/2.5×106 cells, respectively. FITC-GA bound to cytomembrane specifically and 18ß-GA competed to bind the sites significantly in HepG2 cells. Therefore, there is binding effect between fluorescence labeled GA and GA-R. The GA-R on HCC cells is confirmed as expected, which provides a useful reference of active target modified by GA and a novel approach for receptors and ligands study.

[Enzymatic glycosylation of 4'-demethylepipodophyllotoxin].

The glycosides of 4'-demethylepipodophyllotoxin (DMEP) possess various pharmacological activities; however, the chemical synthesis of these glycosides faces challenges in regioselectivity, stereoselectivity, and the protection and de-protection of functional groups. In this work, a novel glycosyltransferase (GT) gene AbGT5 from Aloe barbadensis was successfully cloned, heterogeneously expressed and purified. Recombinant AbGT5 was able to catalyze the glycosylation of DMEP and the glycosylated product, which was separated from the preparative scale reaction, was characterized as DMEP 4'-O-ß-D-glucoside via MS, 1H-NMR, 13C-NMR, HSQC and HMBC. According to the investigations of enzyme properties, AbGT5 show the highest activity around 20 ℃ in the buffer of pH 9.0, and it was independent of divalent metal ions. Under the optimum conditions, the conversion rate of DMEP can reach 80%. Above all, in this work the enzymatic glycosylation of DMEP was achieved with high efficiency by the novel GT AbGT5.

The Inhibition of UDP-Glucuronosyltransferase (UGT) Isoforms by Praeruptorin A and B.

Praeruptorin A (PA) and B (PB) are two important compounds isolated from Bai-hua Qian-hu and have been reported to exert multiple biochemical and pharmacological activities. The present study aims to determine the inhibition of PA and PB on the activity of important phase II drug-metabolizing enzymes uridine 5'-diphospho-glucuronosyltransferase (UGTs) isoforms. In vitro UGT incubation system was used to determine the inhibition potential of PA and PB on the activity of various UGT isoforms. In silico docking was performed to explain the inhibition difference between PA and PB towards the activity of UGT1A6. Inhibition behaviour was determined, and in vitro-in vivo extrapolation was performed by using the combination of in vitro inhibition kinetic parameter (Ki ) and in vivo exposure level of PA. Praeruptorin A (100 µM) exhibited the strongest inhibition on the activity of UGT1A6 and UGT2B7, with 97.8% and 90.1% activity inhibited by 100 µM of PA, respectively. In silico docking study indicates the significant contribution of hydrogen bond interaction towards the stronger inhibition of PA than PB towards UGT1A6. Praeruptorin A noncompetitively inhibited the activity of UGT1A6 and competitively inhibited the activity of UGT2B7. The inhibition kinetic parameter (Ki ) of PA towards UGT1A6 and UGT2B7 was calculated to be 1.2 and 3.3 µM, respectively. The [I]/Ki value was calculated to be 15.8 and 5.8 for the inhibition of PA on UGT1A6 and UGT2B7, indicating high inhibition potential of PA towards these two UGT isoforms in vivo. Therefore, closely monitoring the interaction between PA and drugs mainly undergoing UGT1A6 or UGT2B7-catalyzed metabolism is very necessary. Copyright © 2016 John Wiley & Sons, Ltd.

Effects of ultrahigh pressure extraction on yield and antioxidant activity of chlorogenic acid and cynaroside extracted from flower buds of Lonicera japonica.

The present study was designed to establish and optimize a new method for extracting chlorogenic acid and cynaroside from Lonicera japonica Thunb. through orthogonal experimental designl. A new ultrahigh pressure extraction (UPE) technology was applied to extract chlorogenic acid and cynaroside from L. japonica. The influential factors, including solvent type, ethanol concentration, extraction pressure, time, and temperature, and the solid/liquid ratio, have been studied to optimize the extraction process. The optimal conditions for the UPE were developed by quantitative analysis of the extraction products by HPLC-DAD in comparison with standard samples. In addition, the microstructures of the medicinal materials before and after extraction were studied by scanning electron microscopy (SEM). Furthermore, the extraction efficiency of different extraction methods and the 2, 2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activities of the extracts were investigated. The optimal conditions for extracting chlorogenic acid and cynaroside were as follows: ethanol concentration, 60%; extraction pressure, 400 MPa; extraction time, 2 min; extraction temperature, 30 °C; and the solid/liquid ratio, 1 : 50. Under these conditions, the yields of chlorogenic acid and cynaroside were raised to 4.863% and 0.080%, respectively. Compared with other extraction methods, such as heat reflux extraction (HRE), ultrasonic extraction (UE), and Sohxlet extraction (SE), the UPE method showed several advantages, including higher extraction yield, shorter extraction time, lower energy consumption, and higher purity of the extracts. This study could help better utilize L. japonica flower buds as a readily accessible source of natural antioxidants in food and pharmaceutical industries.

Preparation, optimization and characteristic of huperzine a loaded nanostructured lipid carriers.

The objective of the present work was to study the preparation, optimization and characteristics of Huperzine A (Hup A), an effective Traditional Chinese Medicine treatment of Alzheimer's disease (AD), loaded nanostructured lipid carriers (NLC). NLC were successfully prepared by a modified method of melt ultrasonication followed by high pressure homogenization using Cetyl Palmitate (CP) as the solid lipid, Miglyol((R))812 as the liquid lipid, Soybean phosphatidylcholine (Spc) and Solutol HS15 as the emulsifiers. The best formulation was optimized with a three-factor, three-level Box-Behnken design. Independent variables studied were the amount of the mixed lipid, the amount of the emulsifier mixture and lipid/drug ratio in the formulation. The dependent variables were the particle size, entrapment efficiency (EE) and drug loading (DL). Properties of NLC such as the morphology, particle size, zeta potential, EE, DL and drug release behavior were investigated, respectively. As a result, the designed nanoparticles showed nearly spherical particles with a mean particle size of 120 nm and -22.93 + or - 0.91 mV. The EE (%) and DL (%) could reach up to 89.18 + or - 0.28% and 1.46 + or - 0.05%, respectively. Differential scanning calorimetry (DSC) of Hup A loaded NLC indicated no tendency of recrystallisation. In vitro release studies showed a burst release at the initial stage and followed by a prolonged release of Hup A from NLC up to 96 h. The results suggest that the presented Hup A loaded NLC system is a potential delivery system for improving drug loading capacity and controlled drug release.

Preparation and characterization of nanostructured lipid carriers loaded traditional Chinese medicine, zedoary turmeric oil.

BACKGROUND: The objective of this work was to study the preparation and characteristics of zedoary turmeric oil (ZTO), a traditional Chinese oily medicine, loaded with nanostructured lipid carriers (NLCs). METHOD: Aqueous dispersions of NLC were successfully prepared by melt-emulsification technique using Crodamol SS as the solid lipid, Miglyol 812N as the liquid oil, and soybean phosphatidylcholine (SbPC) as the emulsifier. Properties of NLC such as the particle size and its distribution, the transmission electron microscope (TEM), drug entrapment efficiency (EE), and drug release behavior were investigated, respectively. The Germacrone blood concentration after intravenous administration of ZTO-NLC was determined and compared with that of ZTO-injection. RESULT: As a result, the drug EEs were improved by adding the liquid lipid into the solid lipid of nanoparticles (SLNs). In vitro drug release experiments indicated that the prepared NLC could enhance the drug release rate over the SLN, and the drug release rate could be adjusted by the liquid lipid content in lipid nanospheres. X-ray and differential scanning calorimetry (DSC) measurements revealed that imperfect crystallization occurred in the inner core of the NLC particles. CONCLUSION: The results suggest that the presented NLC system might be a promising intravenous dosage form of water-insoluble oily drugs.

Chondromalacia patellae treated by warming needle and rehabilitation training.

OBJECTIVE: To observe the effect of warming needle combined with rehabilitation training on chondromalacia patellae in a randomized controlled trial. METHODS: The 92 cases were randomly divided into a treatment group treated by warming needle plus rehabilitation training (47 cases) and a control group treated by medication plus rehabilitation training (45 cases), and the therapeutic effect was compared after 20 sessions. RESULTS: The pain was relieved more obviously in the treatment group than in the control group (P < 0.05), and the total effective rate was 91.8% and 71.1% respectively (P < 0.01). CONCLUSION: Warming needle plus rehabilitation training was superior in the therapeutic effect and duration of producing relief of pain to medication plus rehabilitation training in treating chondromalacia patellae.

[Preparation and study in vitro of long-circulating nanoliposomes of curcumin].

OBJECTIVE: To prepare the long-circulating nanoliposomes of curcumin. METHOD: The long-circulating nanoliposomes were prepared by ethanol infusion and the encapsulation efficiency was determindated by the mini-column centrifugation. The effect of some factors on the encapsulation efficiency, such as the buffer solutions, the weight ratio of curcumin to SPC, the weight ratio of SPC to Chol, the pH of buffer solution and the iron strength of water phase, was investigated respectively. Then the formulation was optimized by orthogonal design. RESULT: The encapsulation efficiency of the curcumin liposomes was (88.27 +/- 2.16)%, and the average diameter of the liposomes was (136 +/- 18) nm. There was no change on encapsulation efficency within 30 d. CONCLUSION: The preparation of curcumin liposomes was easy and practicable and the pharmaceutical characterization showed that the curcumin liposomes are stable.

[Preparation of tetrandrine alginate calcium sustained release gel pellets].

OBJECTIVE: To prepare tetrandrine alginate calcium sustained release gel pellets twice daily with Eudragit RS 30D and Eudragit RL 30D. METHODS: The sustained release gel pellets were prepared by fluid bed technique and release in vitro was selected as the evaluate index. The formulation was optimized by full design test based on the studies of coating factors. RESULTS: The optimal coating formulation was shown at the ratio of Eudragit RS 30D and Eudragit RL 30D to 5:1, the loading weight of polymers of 45%, the plasticizer concentration of 20% and 35% talcum powder. CONCLUSION: The perfect sustained release of tetrandrine pellets can be obtained by adjusting the ratio of Eudragit RS 30D and Eudragit RL 30D and the loading weight of polymers.

[Sanhuang tablets research].

Sanhuang tablets is one of common traditional Chinese patent preparation, it has effects of clear fever, detoxifcation, dispel inflammation, purgation. It was contained in the ministerial standards of Ministry of Health in 1997, and was contained in Chinese pharmacopoeia version 1 of 2000 and 2005. Its improvement of dosage form, preparation technique, quality analysis, pharmacology and clinical usage were reviewed in this paper.

[Comparative study on quality of Tongrentang red ginseng and Korean red ginseng--determination of ginsenosides and polysaccharides].

OBJECTIVE: To establish methods for quantitative determination of ginseng saponins, ginsenoside Rg1, Re, Rb1 and polysaccarides and compare the qualities of Tongrentang Red Ginseng and Korean Red Ginseng. METHOD: Macroreticular resin-colorimetric method was developed to determine ginseng saponins and a new HPLC method with gradient eluents was established for determination of ginsenoside Rg1, Re, Rb1. For ginseng polysaccharides, phenol-oil of vitriol colorimetric method was developed and some factors were also optimized. RESULT: The content of ginseng saponins in Tongrentang Red Ginseng was not lower than that of Korean Red Ginseng. Ginsenoside Rg1 and Rb1 in Tongrentang Red Ginseng were higher than those in Korean Red Ginseng, while Ginsenoside Re was slightly lower than that of Korean Red Ginseng. However, the amount of Ginseng Polysaccharides in Tongrentang Red Ginseng was greater than those in Korean Red Ginseng. CONCLUSION: The contents of ginseng saponins and ginsenoside Rg1, Re, Rb1 in Tongrentang Red Ginseng were not lower than that in Korean Red Ginseng. The methods for determination of ginsenosides and ginseng polysaccharides were quite accurate and reliable to the quality control of Ginseng.

Preparation of the traditional Chinese medicine compound recipe Shuxiong sustained-release capsules by multiparticulate time-controlled explosion technology.

In this study the traditional Chinese medicine compound recipe (TCMCR) Shuxiong sustained-release capsules (SXSRC) were prepared by multiparticulate time-controlled explosion technology. First, Shuxiong pellets were prepared with the refined medicinal materials containing in the recipe of Shuxiong tablets. Then, the pellets were coated sequentially with an inner swelling layer containing low-substituted hydroxypropylcellulose as the swelling agent and an outer rupturable layer of ethylcellulose. Finally, SXSRC were developed by encapsulating five kinds of pellets whose respective coating level of outer layer was 0%, 9%, 15%, 18% and 20% at equivalent ratio in hard gelatin capsules. Under the simulated gastrointestinal pH conditions, the in vitro release test of SXSRC was carried out. The value of similarity factor (f2) of hydroxysafflor yellow A and Panax notoginseng saponins, hydroxysafflor yellow A and ferulic acid, Panax notoginseng saponins and ferulic acid was 90.1, 77.3, 87.0, respectively. The release profiles of these three compositions from SXSRC showed a characteristic of obvious sustained-release and no significant difference between them. The results indicated that using multiparticulate time-controlled explosion technology various components in TCMCR with vastly different physicochemical properties could be released synchronously while sustained-releasing. That complies with the organic whole conception of compound compatibility of TCMCR.

Pharmacokinetic behaviors and oral bioavailability of oridonin in rat plasma.

AIM: To study the intravenous and oral pharmacokinetic behavior of oridonin and its extent of absolute oral bioavailability in rats. METHODS: Oridonin was administered to rats via iv (5, 10 and 15 mg/kg), po (20, 40 and 80 mg/kg) or ip administration (10 mg/kg). The concentrations of oridonin in rat plasma were determined by a high performance liquid chromatography with electrospray ionization mass spectrometric detection (HPLC/ESI-MS) method and the pharmacokinetic parameters were determined by non-compartmental analysis. RESULTS: The plasma concentration of oridonin after intravenous administration decreased polyexponentially, and the pharmacokinetic parameters of oridonin were dose-independent within the examined range. Oridonin was absorbed rapidly after oral gavage with a t(max) of less than 15 min; the extent of absolute bioavailability of oridonin following oral administration was 4.32%, 4.58% and 10.8%. The extent of absolute bioavailability of oridonin following intraperitoneal administration was 12.6%. CONCLUSION: First order rate pharmacokinetics were observed for oridonin within the range of iv doses, while the extent of absolute oral bioavailability was rather low and dose- dependent. The low and dose-dependent extent of oral bioavailability may be due to the saturation of first-pass effects.

[Studies on preparation of sustained-release Shuxiong formulation, a traditional Chinese medicine compound recipe, using time-controlled release techniques].

OBJECTIVE: To prepare a sustained-release formulation of traditional Chinese medicine compound recipe by adopting time-controlled release techniques. METHOD: Shuxiong tablets were chosen as model drug. The prescription and technique of core tablets were formulated with selecting disintegrating time and swelling volume of core tablets in water as index. The time-controlled release tablets were prepared by adopting press-coated techniques, using PEG6000, HCO and EVA as coating materials. The influences of compositions, preparation process and dissolution conditions in vitro on the lag time (T(lag)) of drug release were investigated. RESULT: The composition of core tablets was as follow: 30% of drug, 50% MCC and 20% CMS-Na. The T(lag) of time-controlled release tablets was altered remarkably by PEG6000 content of the outer layer, the amount of outer layer and hardness of tablet. The viscosity of dissolution media and basket rotation had less influence on the T(lag) but more on rate of drug release. CONCLUSION: The core tablets pressed with the optimized composition had preferable swelling and disintegrating properties. The shuxiong sustained-release formulations which contained core tablet and two kinds of time-controlled release tablets with 3 h and 6 h of T(lag) could release drug successively at 0 h, 3 h and 6 h in vitro. The technique made it possible that various components with extremely different physicochemical properties in these preparations could release synchronously.

[Preparation of Shuxiong micropellets by centrifugal granulation technology].

OBJECTIVE: To prepare shuxiong micropellets. METHOD: Shuxiong micropellets were prepared by using a centrifugal granulator. The formulation composition and process factors were optimized investigated by adopting several indices such as size distribution, repose angle, bulk density and friability as indexes. RESULT: The optimal process parameters were as follows. The ratio of fine intermediate product and MCC was 3:1 (w/w), the adhesive agent was 3% HMPC solution, the rotating rate of plate was 200 r x min(-1), the blower rate was 15 x 20 L x min(-1), the rate of air flow was 15 L x min(-1), the spray air pressure was 0.5 MPa, the rotating of spray solution pump was 5-25 r x min(-1) and the rotating rate of powder feed machine was 5-25 r x min(-1). CONCLUSION: Under the optimal conditions, micropellets prepared by using centrifugal granulator hadpossessed prefect shape and surface characteristics and the yield of shuxiong pellets was 90.5%.

[Study on influence of buffer system on separate capacity of macroporous resin on ferulic liposome].

OBJECTIVE: To study the effect of buffer on separate capacity of macroporous resin. To evaluate the quality of ferulic acid liposome and determine its entrapment efficiency. METHOD: Different type of macroporous resin counterpoised by buffer system of Na2 HPO3-NaH2, PO3 was used to separate the free ferulic acid from the preparation and HPLC was used to determine the concentration of the ferulic acid to calculate the entrapment efficiency. RESULT: This method had good linearity in the range of 0.56 - 2.8 g x mL(-1) (r = 0.999 6). The precision RSD was less than 1.1%. The adsorption effect of macroporous resin on liposome was reduced while it had no effect on the absorption ability of macroporous resin on the ferulic acid by the usage of buffer. The recovery of HPD450 resin on blank liposome was between 97.2% - 100.8%, while the average recovery is 98.1%. CONCLUSION: Buffer system can enhance the separate ability of macroporous resin on liposome and free drug.

[Preparation of inclusion complex of daidzein and hydropropyl-beta-cyclodextrin].

OBJECTIVE: To prepare an inclusion complex of daidzein and hydropropyl-beta-cyclodextrin to enhance the solubility of daidzein. METHOD: The inclusion complex of daidzein was prepared by the solution stirring method. The binary system of daidzein and HP-beta-CD was confirmed by differential thermal, thermogravimetry analysis, infrared spectroscopy and X-ray diffractometry. RESULT: The drug content in the inclusion complex was 6. 76% and the solubility was 13.68 mg x mL(-1). The identification results showed that the inclusion complex was formed. CONCLUSION: The preparation method of the inclusion complex of daidzein and hydropropyl-beta-cyclodextrin is simple and available, with a increased solubility of daidzein.

The effects of oridonin on cell growth, cell cycle, cell migration and differentiation in melanoma cells.

Oridonin, a diterpenoid isolated from Rabdosia rubescens (Hemsl.) Hara, is currently one of the most important traditional Chinese herbal medicines. We investigated the anti-proliferation effect of oridonin on the cultured murine melanoma cell line K1735M2. The growth inhibition activity of oridonin for K1735M2 cells occurred in a time- and dose-dependent manner (IC50 was 7.4+/-0.6 microM). Further studies showed that these inhibition effects were associated with dose-dependent G2/M phase arrest and differentiation induction. Detection of morphological observation showed that oridonin could induce K1735M2 cells to produce dendrite-like structures. The results of the migration indicated that oridonin affected motility of K1735M2 cells in a dose-dependent manner. These results suggested that oridonin is a potential candidate for melanoma cancer therapy.

Role of enteral immunonutrition in patients with gastric carcinoma undergoing major surgery.

OBJECTIVE: To evaluate the influence of postoperative immunonutrition on immune and nutritional parameters in patients with gastric carcinoma. METHODS: From September 2002 to August 2003, 40 patients with gastric carcinoma who had undergone major surgery were randomly divided into an immunonutrition group and standard nutrition group, each of 20 patients. On postoperative Day 2, patients in the standard nutrition group received a standard enteral formula, while those in the immunonutrition group received an enteral formula enriched with glutamine, arginine and omega-3 fatty acids. Nutritional support was continued for 7 days. Blood samples were obtained to determine plasma albumin, prealbumin and transferrin on Days 0, 5 and 9. On Days 0, 1 and 9, blood samples were collected to detect immunoglobulin (Ig) A, IgG, IgM, CD4 and CD8 cell counts, the ratio of CD4/CD8, interleukin (IL)-2, IL-6 and tumour necrosis factor (TNF)-alpha, respectively. RESULTS: There were no significant differences between the two groups in protein and immune parameters preoperatively and no significant differences in management perioperatively. No serious adverse effects were recorded with the two formulas. Postoperative procedures were smooth in both groups. On Day 9, serum levels of prealbumin and transferrin were higher in the immunonutrition group than in the standard nutrition group (p<0.01). After 7 days' nutritional support, patients in the immunonutrition group had higher levels of immunoglobulin, CD4 cell counts, CD4/CD8 ratio and IL-2 than those in the control group, whereas IL-6 and TNF-alpha levels were significantly lower in the immunonutrition group. CONCLUSION: Compared with standard enteral nutrition, enteral immunonutrition can improve defence mechanisms and modulate inflammatory action after major elective surgery for gastric carcinoma.