Electrokinetical enhanced delivery of acidic potassium permanganate and removal of copper-pyrene compound pollution in a red soil.

Soil contaminated by combinations of heavy metals and organic pollutants has become an increasingly prominent environmental issue. Developing efficient technologies to synchronously decontaminate such co-contaminated sites is challenging and imperative. In our previous study for the treatment of Copper (Cu) and pyrene contaminated soil, electrokinetics (EK) coupled acidic permanganate (PM) performed best for degradation of pyrene near the injection spot, but it unfortunately prevented the migration of Cu. In order to further enhance the removal efficiency of these contaminants, in this study, batch experiments were conducted to investigate the feasibility of delivering PM by EK under regular refreshment of acidoxidant along with amplification of voltage gradient. The results showed that PM can be transported from cathode to anode to S2 section (near the anode) with a slow mass transfer rate via electromigration and reversed electroosmotic flow, and further delivery was achieved when Cu and pyrene were coexisted. The reaction of pyrene with PM produced a lower soil pH condition, which was conductive to the transport of Cu, and the existence of Cu promoted the migration of PM. The coexistence of Cu and pyrene favored the removal efficiency of the pollutants, and 92.8% of Cu and 70.7% of pyrene were removed after 15 d EK treatment. Thus, EK + acidic PM with regularly supplement of oxidant is appropriate to achieve complete mass depletion of heavy metals and PAHs, especially in low buffered soils.

Electrokinetic delivery of persulfate to remediate PCBs polluted soils: effect of injection spot.

Persulfate-based in situ chemical oxidation (ISCO) is a promising technique for the remediation of organic compounds contaminated soils. Electrokinetics (EK) provides an alternative method to deliver oxidants into the target zones especially in low permeable-soil. In this study, the flexibility of delivering persulfate by EK to remediate polychlorinated biphenyls (PCBs) polluted soil was investigated. 20% (w/w) of persulfate was injected at the anode, cathode and both electrodes to examine its transport behaviors under electrical field, and the effect of field inversion process was also evaluated. The results showed that high dosage of persulfate could be delivered into S4 section (near cathode) by electroosmosis when persulfate was injected from anode, 30.8% of PCBs was removed from the soil, and the formed hydroxyl precipitation near the cathode during EK process impeded the transportation of persulfate. In contrast, only 18.9% of PCBs was removed with the injection of persulfate from cathode, although the breakthrough of persulfate into the anode reservoir was observed. These results indicated that the electroosmotic flow is more effective for the transportation of persulfate into soil. The addition of persulfate from both electrodes did not significantly facilitate the PCBs oxidation as well as the treatment of electrical field reversion, the reinforced negative depolarization function occurring in the cathode at high current consumed most of the oxidant. Furthermore, it was found that strong acid condition near the anode favored the oxidation of PCBs by persulfate and the degradation of PCBs was in consistent with the oxidation of Soil TOC in EK/persulfate system.