ABSTRACT
In 2011-2014, ELISA or nucleic acid spot hybridization (NASH) testing for common potato viruses or Potato spindle tuber viroid (PSTVd) was performed on 500 leaf samples collected in potato fields in the northeast provinces Heilongjiang and Inner Mongolia, China. The results revealed that 38.4% (Heilongjiang) and 27.7% (Inner Mongolia) were positive for Potato virus Y (PVY). To unveil the strain composition and population structure of PVY in the region, the multiplex RT-PCR described by Chikh-Ali et al. was performed on all of the ELISA-PVY-positive samples. Of the 158 samples whose PVY strain scenarios could be determined, PVYNTN-NW-SYR-II and PVYN-Wi were the most abundant strains, occurring in 58.9 and 47.5% samples, followed by PVYNTN-NW-SYR-I (31.0%), PVYN:O (19.6%), Eu-PVYNTN (7.6%), NA-PVYN (1.3%), and PVYO (0.6%). In the 84 single-strain-infected samples, PVYN-Wi accounted for 41.7%, PVYNTN-NW-SYR-II for 40.5%, PVYNTN-NW-SYR-I for 14.3%, and PVYN:O and Eu-PVYNTN for 3.6% each. Seven isolates representing PVYNTN-NW-SYR-I (HLJ-6-1 and HLJ-9-4), PVYNTN-NW-SYR-II (INM-W-369-12 and SC-1-1-2), PVYN:O (HLJ-30-2), and PVYN-Wi (HLJ-BDH-2 and HLJ-C-429) were sequenced and analyzed molecularly. Whereas the sequence identities for isolates belonging to the same strain group were >98.5%, they fell for isolates belonging to different strain groups to 92.7-98.1% at the genome level and 96.1-98.4% at the polyprotein level. Interestingly, the exact location of the recombination events varied among isolates within a strain group. Phylogenetic analysis of all 42 full length PVY sequences from China indicated that most clustered to various recombinant groups, despite the fact that the PVY isolates were isolated from at least five host species. Pathological analysis of four isolates representing PVYN:O, PVYN-Wi, PVYNTN-NW-SYR-I, and PVYNTN-NW-SYR-II revealed that the PVYNTN-NW-SYR-II isolate incited the most severe symptoms on potato cultivar Kexin 13, followed by PVYNTN-NW-SYR-I, PVYN:O and PVYN-Wi. The PVYNTN-NW-SYR-I and PVYNTN-NW-SYR-II isolates also caused necrotic ringspots on the tubers of Kexin 13, indicating their ability to induce the potato tuber necrotic ringspot disease in potato.
Subject(s)
Genetic Variation , Potyvirus , Solanum tuberosum , China , Phylogeny , Plant Diseases/virology , Potyvirus/classification , Potyvirus/genetics , Solanum tuberosum/virologyABSTRACT
Objective: Based on different potato virus Y isolates gene sequencing, we studied the diversity of potato virus Y strains, to provide information for molecular detection, prevention and control of the virus. Methods: P1 gene of 15 samples of potato virus Y of Heilongjiang Province was cloned and then the sequences of genes were analyzed by using phylogenetic tree. Results: Samples were divided into two groups. According to a comparative analysis, 10 samples have highly conservative and homologous genes. They are the dominant population in the research area and have certain genetic distance to other domestic samples and foreign samples. In another group, 5 samples differ significantly with local dominant population in term of P1 gene. These 5 samples also have some differences and their P1 genes are close to those of other domestic samples and foreign samples. By comparing PVY strain data provided by uploaded sequences in GenBank, it found that P1 gene of test samples is similar with PVYNTN-NW strains. These 15 samples as well as other domestic samples are evolved from PVYN strains. Conclusions: The P1 gene analysis demonstrated that PVY is influenced by environment significantly and PVY of 10 samples in Heilongjiang develops local characteristics in the long-term evolution. The later 5 samples reflect that most PVY in China may be introduced by foreign cultivars. At the same time, PVY spreads through regional resource exchange and tuber transportation in China.
Subject(s)
Potyvirus/metabolism , Viral Proteins/metabolism , China , Genome, Viral , Phylogeny , Plant Diseases/virology , Potyvirus/classification , Potyvirus/genetics , Potyvirus/isolation & purification , Solanum tuberosum/virology , Viral Proteins/geneticsABSTRACT
In this research, various red mud granular adsorbents (RMGA), which were made from red mud--a kind of waste residue from the alumina industry, were manufactured under different sintering temperatures (ST). For the purpose of investigating the regeneration characteristics of them for phosphate removal, systematic experiments were carried out, including adsorption, desorption (using different desorption reagents) and resorption tests. When RMGA were desorbed by HCl solutions, the desorption efficiencies were relatively higher due to acid erosion, but the corresponding resorption capacities became small owing to extraction of effective components. Although RMGA rarely released phosphate in desorption process when being desorbed by deionised water, it performed well on resorption of phosphate afterwards. It was assumed that the lower pH in resorption process, which was caused by the reductive release of CaO into solution, contributed to a weaker competition of OH(-) on phosphate resorption. When NaOH solution was employed as the desorption reagent, resorption capacities of RMGA were relatively larger and increased with the increase of NaOH concentration, because OH(-) might ameliorate the chemical composition on the surface of RMGA potentially. In addition, several RMGA manufactured under lower ST obtained larger resorption capacities than their original adsorption capacities, because of the comparatively unstable crystal structure which led to a stronger amelioration on them.
Subject(s)
Aluminum Oxide , Indicators and Reagents/chemistry , Phosphates/isolation & purification , Adsorption , Hydrochloric Acid/chemistry , Hydrogen-Ion Concentration , Mining , Sodium Hydroxide/chemistry , Solutions , X-Ray DiffractionABSTRACT
Red mud (RM), a waste tailing from alumina industry, was employed with bentonite and starch as the main raw materials for producing granular adsorbents in this study. The important parameters, which greatly affect the characteristics of red mud granular adsorbents (RMGA), such as the mass ratio of three raw materials, preheating time, preheating temperature, sintering time and sintering temperature (ST), were investigated. Adsorption capacities for various RMGA were described in terms of removal of phosphate from aqueous solution according to the adsorption experiments, in which certain operation parameters (like stirring speed, reaction time, adsorbent dosage, initial pH and initial phosphate concentration) at three different aquatic temperatures (AT) were applied. The results showed that the optimum ST, under which the largest adsorption capacity was achieved for RMGA with certain RM ratio, varied with different AT in adsorption process. Based on the further characterizations of RMGA, it was speculated that the performance above was caused by the competitive interactions of chemical adsorption and physical adsorption on RMGA, since the increase in ST could lead to qualitative diversification on the surface and quantitative decrease of effective components for adsorption simultaneously.
Subject(s)
Aluminum Oxide , Industrial Waste/prevention & control , Phosphates/isolation & purification , Adsorption , Bentonite/chemistry , Hydrogen-Ion Concentration , Research , Starch/chemistry , TemperatureABSTRACT
Sludge-fly ash ceramic particles (SFCP) and clay ceramic particles (CCP) were employed in two lab-scale up-flow biological aerated filters (BAF) for wastewater treatment to investigate the availability of SFCP used as biofilm support compared with CCP. For synthetic wastewater, under the selected hydraulic retention times (HRT) of 1.5, 0.75 and 0.37 h, respectively, the removal efficiencies of chemical oxygen demand (COD(Cr)) and ammonium nitrogen (NH(4)(+)-N) in SFCP reactor were all higher than those of CCP reactor all through the media height. Moreover, better capabilities responding to loading shock and faster recovery after short intermittence were observed in the SFCP reactor compared with the CCP reactor. For municipal wastewater treatment, which was carried out under HRT of 0.75 h, air-liquid ratio of 7.5 and backwashing period of 48 h, the SFCP reactor also performed better than the CCP reactor, especially for the removal of NH(4)(+)-N.