Biodegradation of oil-contaminated aqueous ecosystem using an immobilized fungi biomass and kinetic study.

Remediation of environmental oil pollution with the usage of fungal organisms has proven to be a successful cleanup bioremediation method for organic contaminants. To investigate the breakdown of oil pollutants in water environments, biosurfactant-producing fungi have been isolated from oil-polluted soil samples. 16s rRNA sequencing technique was performed to identify the fungal organism and phylogenetic tree has been constructed. A variety of biosurfactant screening tests have demonstrated the better biosurfactant producing ability of fungi. The emulsion's stability, which is essential for the biodegradation process, was indicated by the emulsification index of 68.48% and emulsification activity of 1.3. In the isolated biosurfactant, important functional groups such as amino groups, lipids, and sugars were found according to thin layer chromatography analysis with a maximum retention value of 0.85. A maximum oil degradation of around 64% was observed with immobilized beads within 12 days. The half-life, and degradation removal rate constant of 20.21 days and 0.03 day-1, respectively, have been determined by the degradation kinetic analysis. GCMS analysis confirmed the highly degraded hydrocarbons such as nonanoic acid and pyrrolidine. The immobilized fungi exhibit better oil biodegradability in aqueous solutions.

Laccase production by Pleurotus ostreatus using cassava waste and its application in remediation of phenolic and polycyclic aromatic hydrocarbon-contaminated lignocellulosic biorefinery wastewater.

The treatment of contaminants from lignocellulosic biorefinery effluent has recently been identified as a unique challenge. This study focuses on removing phenolic contaminants and polycyclic aromatic hydrocarbons (PAHs) from lignocellulosic biorefinery wastewater (BRW) applying a laccase-assisted approach. Cassava waste was used as a substrate to produce the maximum yield of laccase enzyme (3.9 U/g) from Pleurotus ostreatus. Among the different inducers supplemented, CuSO4 (0.5 mM) showed an eight-fold increase in enzyme production (30.8 U/g) after 240 h of incubation. The catalytic efficiency of laccase was observed as 128.7 ± 8.47 S-1mM-1 for syringaldazine oxidation at optimum pH 4.0 and 40 °C. Laccase activity was completely inhibited by lead (II) ion, mercury (II) ion, sodium dodecyl sulphate, sodium azide and 1,4 dithiothretiol and induced significantly by manganese (II) ion and rhamnolipid. After treating BRW with laccase, the concentrations of PAHs and phenolic contaminants of 1144 µg/L and 46160 µg/L were reduced to 96 µg/L and 16100 µg/L, respectively. The ability of laccase to effectively degrade PAHs in the presence of different phenolic compounds implies that phenolic contaminants may play a role in PAHs degradation. After 240 h, organic contaminants were removed from BRW in the following order: phenol >2,4-dinitrophenol > 2-methyl-4,6-dinitrophenol > 2,3,4,6-tetrachlorophenol > acenaphthene > fluorine > phenanthrene > fluoranthene > pyrene > anthracene > chrysene > naphthalene > benzo(a)anthracene > benzo(a)pyrene > benzo(b)fluoranthene > pentachlorophenol > indeno(1,2,3-cd)pyrene > benzo(j) fluoranthene > benzo[k]fluoranthène. The multiple contaminant remediation from the BRW by enzymatic method, clearly suggests that the laccase can be used as a bioremediation tool for the treatment of wastewater from various industries.

Plant-mediated gold and silver nanoparticles as detectors of heavy metal contamination.

Heavy metals are dumped into the environment as a result of human activities, posing a serious threat to ecology and human health. Surface water, potable drinking water, potable groundwater, and majority of wastewater include their traces, due to which, their detection by nanoparticles has received a lot of attention in recent years. Although microorganisms are utilized for green nanoparticle production, plant materials have recently been explored because they are more environmentally friendly, easier to scale up, and require fewer specific growth conditions. The production and attributes of nanoparticles synthesized by plant mediation could be enhanced through design of experiments approach, extending their feasibility in the detection of heavy metals in polluted environmental samples. A concise review on green synthesis of silver and gold nanoparticles utilizing plant phytochemicals, its mechanism of synthesis along with significance of design of experiments for enhancement, and their use as heavy metal contamination detectors is presented in the current study.

Detection and identification of hazardous organic pollutants from distillery wastewater by GC-MS analysis and its phytotoxicity and genotoxicity evaluation by using Allium cepa and Cicer arietinum L.

Distillery industry generates a huge amount of wastewater, which contains a high strength of organic and inorganic load. Accordingly, this study aims to analyze the physico-chemical pollution parameters and the occurrence of phytotoxic, cytotoxic and genotoxic pollutants in wastewater. The result revealed that values of wastewater parameters were recorded as 13268 mg l-1 (BOD), 25144 mg l-1 (COD), 25144 mg l-1 (TS), and 6634 mg l-1 (phosphate), while pH was alkaline. The organic compounds detected by GC-MS were quercetin 7,3',4'-trimethoxy, octadecadienoic acid, propanoic acid, glycocholic acid methyl ester, cantaxanthin, etc. The Allium cepa was used for the toxicity test with different concentrations of wastewater showed a significant level of reduction in root growth and length after exposure and the maximum reduction was at 25% and 20%. Phytotoxicity studies were performed using Cicer arietinum L. with different concentrations of wastewater, which showed adverse effects on seed germination, root length, and the effect was associated with the increasing concentration of wastewater. A. cepa root tips were used for the analysis of mitotic index (MI), nuclear abnormalities (NA), and chromosomal aberrations (CA). MI was decreasing significantly from 72% (control) to 33%, 22%, 23%, 21%, and 18% at 5%, 10%, 15%, 20%, and 25% wastewater concentration, respectively. The A. cepa root tip cells showed chromosomal aberrations and nuclear abnormalities like vagrant, stickiness, chromosomal loss, c-mitosis, binucleated, micronuclei, and aberrant cell. This study concluded that the wastewater treatment process is insufficient and the discharged waste needs a proper assessment to know the associated health risk.

Functionalization of MXene-based nanomaterials for the treatment of micropollutants in aquatic system: A review.

The increased industrialization and urbanization generate a larger quantity of effluent that is discharged into the environment regularly. Based on the effluent composition produced from various industries, the number of hazardous substances such as heavy metals, hydrocarbons, volatile organic compounds, organic chemicals, microorganisms introduced into the aquatic systems vary. The conventional wastewater treatment systems do not meet the effluent standards before discharge and require a different treatment system before reuse. Adsorption is an eco-friendly technique that uses selective adsorbents to remove hazardous pollutants even at microscale levels. MXene, a 2-Dimensional nanomaterial with resplendent properties like conductivity, hydrophilicity, stability, and functionalized surface characteristics, is found as a potential candidate for pollutant removal systems. This review discusses the fabrication, characterization, and application of MXene based nanoparticles to remove many pollutants in water treatment systems. The improvement in surface properties and adsorption capacity of MXene based NPs, when modified using different modification agents, has also been discussed. Their feasibility in terms of economic and environmental aspects has been evaluated to understand their scope for practical application in large-scale industries. The challenges towards the synthesis and toxicity's importance have been discussed, with the appropriate recommendations.

Novel synthesis of fluorescent carbon dots from bio-based Carica Papaya Leaves: Optical and structural properties with antioxidant and anti-inflammatory activities.

Fluorescent carbon dots (CDs) are prepared from a natural resource Carica Papaya Leaves, by sand bath method. The as-synthesized CDs optical and structural properties were characterized by UltraViolet-Visible, FT- IR, and fluorescence spectroscopy. Also the size, shape, and particle size distribution was studied using Transmission electron microscopy technique. These CDs were examined for biomedical applications like free radical scavenging activity using DPPH assay, antioxidant activity using phosphomolybdate assay, and in vitro anti-inflammatory activity using membrane stabilization protocol. The CDs exhibited excellent biological activities at lower concentrations and showed notable half-maximal effective concentration (EC50). The EC50 of free radical scavenging activity (27.6 µg/mL), antioxidant activity (23.00 µg/mL), and in vitro anti-inflammatory activity (15.52 µg/mL) signifies that CDs can be potential therapeutic agents.

Application of biomass derived products in mid-size automotive industries: A review.

The automotive industry is directly affected by the shortage of fossil fuels and the excessive pollution resulting from crude oil-based fuels has many adverse effects on the environment. The search for a greener and sustainable source of materials and fuels to power automobiles has ultimately led to the usage of biomass and biobased sources as the main precursor due to its graft availability and renewability. Biobased fuels developed have been shown to easily blend in with the existing automobile engines and to provide sustainable performance. Similarly, the usage of various biobased polymers, plastics, and composite materials as the structural materials for the construction of automobiles instead of crude oil sources have shown to be invaluable. The powering of automobiles with electricity is the future of the transportation industry to address the greenhouse gas emissions caused by fossil fuels. Hence, biobased lithium-ion batteries and supercapacitors have started to enter the mid-sized automotive industry. However, extensive commercialization of biobased products application in the automotive sector is underdeveloped. Hence it is customary to assess the various drawbacks of using biobased materials and identify the correct pathway for new research and development in this field. Therefore, this review covers various applications of biobased products in the automotive industries and mentions the active researches going on in this field to replace petroleum and crude oil-based sources with biobased sources.

Recent technologies for nutrient removal and recovery from wastewaters: A review.

Water scarcity and its pollution has become a concern in recent times. The disposal of nutrient-rich (nitrogen and phosphorous) wastewater is also one of the main cause of water pollution through eutrophication, reduced dissolved oxygen that poses threat to aquatic ecosystems. As a result, nutrient removal has become a mandate apart from the removal of organics. However, the removal of nutrients from sewage is a challenging task. Conversely, conventional biological treatment processes provide little relief in nutrient removal. The treated effluents from conventional biological processes do not achieve the stringent nutrient removal disposal standard limits and become primary cause of pollution in the receiving water bodies. This has stressed upon the need for eco-friendly, low-energy and cost-efficient nutrient removal treatment technologies. Various biological treatment combinations or variants are in use for the efficient removal of nutrients. The biological processes in itself or in combination with chemical processes are preferred over technologies based solely on physico-chemical processes for its treatment performance at lower cost. This review summarizes the existing treatment processes and their possible up-gradation with the aim to accomplish the marked effluent standards for the nutrients. The concept of conventional systems and advanced systems for nutrients (nitrogen and phosphorous) removal which are already developed or under development are deeply discussed. Further, the challenges of each treatment systems are abridged. Finally, the possible suggestions for the modification/retrofitting of existing treatment systems for achieving stringent disposal standards are pointed out.

Recent advancements of spinel ferrite based binary nanocomposite photocatalysts in wastewater treatment.

A lot of studies on spinel ferrites (MFe2O4, M = divalent metal ion) and their binary nanocomposites as photocatalysts in the decontamination of wastewater have been performed, because MFe2O4 nanoparticles are relatively stable, biocompatible and low-cost efficient photocatalyst. The separation of MFe2O4 photocatalyst is easy owing to its excellent magnetic behavior. With this background, the recent developments on photocatalytic performances of MFe2O4 based binary nanocomposites were comprehensively reviewed. Especially, a focus on MFe2O4/metal oxides, MFe2O4/carbon based materials, MFe2O4/polymers, MFe2O4/metal nanoparticles and MFe2O4/other compounds for the photocatalytic degradation of dyes, emerging contaminants and inorganic pollutants has been thoroughly given. The advantages of MFe2O4 based nanocomposites as photocatalysts were also discussed. In addition, the possible pathway of active free radical generation by these photocatalysts under visible and ultraviolet irradiation has been explained. A comparison of photocatalytic activities of MFe2O4 based binary nanocomposites with recent reports has been carried out. This review concludes that MFe2O4 based binary nanocomposites have potential capacity in water purification technology. Nevertheless, their practical utilization in water treatment plants still needs to be further studied.

Enhancement of ultrasound assisted aqueous extraction of polyphenols from waste fruit peel using dimethyl sulfoxide as surfactant: Assessment of kinetic models.

Pomegranate peel, a major waste from the food processing industries containing biologically active compounds, could be converted into value-added products having medicinal properties. Present study deals with the ultrasound-assisted surfactant, namely dimethyl sulfoxide (DMSO) aided polyphenolics extraction from pomegranate peel waste using double distilled water (DDW) as a solvent. Maximum total yield of extraction and total polyphenolic content (TPC) were found respectively to be 43.58 ± 1.0 and 49.55 ± 0.8%, at optimized sonication parameters viz. temperature 50 °C, power density 1.2 W/mL and time 40 min followed by surfactant aided extraction under optimum conditions 0.6% DMSO, 50 °C and 150 rpm for 90 min. Kinetic models were developed to determine the polyphenolics concentration and validated. GC-MS analysis of the extract revealed 22 phenolic compounds. Thus, the acquired results have ensured the significance of ultrasound pre-treated surfactant aided extraction of polyphenolic compounds and this process can be developed for commercial production.

A review on new aspects of lipopeptide biosurfactant: Types, production, properties and its application in the bioremediation process.

Nowadays, the worldwide search regarding renewable products from natural resources is increasing due to the toxicity of chemical counterparts. Biosurfactants are surface-active compounds that contain several physiological functions that are used in industries like food, pharmaceutical, petroleum and agriculture. Microbial lipopeptides have gained more attention among the researchers for their low toxicity, efficient action and good biodegradability when compared with other surfactants. Because of their versatile properties, lipopeptide compounds are utilized in the remediation of organic and inorganic pollutants. This review presented a depth evaluation of lipopeptide surfactants in the bioremediation process and their properties to maintain a sustainable environment. Lipopeptide can acts as a replacement to chemical surfactants only if they meet industrial-scale production and low-cost substrates. This review also demonstrated the production of a lipopeptide biosurfactant from a low-cost substrate and depicted plausible techniques to manage the substrate residues to determine its ability in the different applications particularly in the bioremediation process.

Synthesis and characterization of metallic nanoparticles impregnated onto activated carbon using leaf extract of Mukia maderasapatna: Evaluation of antimicrobial activities.

In the present research, in vitro antimicrobial activity of metallic nanoparticles impregnated on activated carbon (MNPI-AC) was investigated. Activated carbon (AC) was successfully prepared from Fishtail palm Caryota urens seeds by using two surface modification process (i) sulphuric acid treated Caryota urens seeds (SMCUS) (ii) ultrasonic assisted Caryota urens seeds (UACUS). Mukia maderasapatna plant extract was used as reducing agent for the synthesis of metallic nanoparticles. The characterization studies of MNPI - AC were performed by using a UV-visible spectrophotometer and Fourier Transform Infrared Spectroscopic (FT-IR) analyses. Different active functional groups were identified by FTIR studies which were responsible for impregnation of metallic nanoparticles on a surface of AC. The antimicrobial activity of MNPI - AC was examined against four bacterial strains: 2 g positive (Staphylococcus aureus and Staphylococcus epidermidis) and 2 g negative (Pseudomonas aeruginosa and Escherichia coli) and one fungal strain (Candida albicans). Among different MNPs, Pb-AC (UACUS) shows that higher zone of inhibition. These results in the literature showed that MNPI - AC are to be effective for deactivation and inactivation of microbes in an efficient manner.