The metabolism of pyrene by a novel Altererythrobacter sp. with in-situ co-substrates: A mechanistic analysis based on pathway, genomics, and enzyme activity.

Using co-substrates to enhance the metabolic activity of microbes is an effective way for high-molecular-weight polycyclic aromatic hydrocarbons removal in petroleum-contaminated environments. However, the long degradation period and exhausting substrates limit the enhancement of metabolic activity. In this study, Altererythrobacter sp. N1 was screened from petroleum-contaminated soil in Shengli Oilfield, China, which could utilize pyrene as the sole carbon source and energy source. Saturated aromatic fractions and crude oils were used as in-situ co-substrates to enhance pyrene degradation. Enzyme activity was influenced by the different co-substrates. The highest degradation rate (75.98%) was achieved when crude oil was used as the substrate because strain N1 could utilize saturated and aromatic hydrocarbons from crude oil simultaneously to enhance the degrading enzyme activity. Moreover, the phthalate pathway was dominant, while the salicylate pathway was secondary. Furthermore, the Rieske-type aromatic cyclo-dioxygenase gene was annotated in the Altererythrobacter sp. N1 genome for the first time. Therefore, the co-metabolism of pyrene was sustained to achieve a long degradation period without the addition of exogenous substrates. This study is valuable as a potential method for the biodegradation of high-molecular-weight polycyclic aromatic hydrocarbons.

Acetoin modulates conformational change of surfactin: Interfacial assembly and crude oil-washing performance.

Due to its special structure, the cyclic lipopeptide surfactin showed remarkable responsiveness to stimuli such as pH, temperature and metal ions. However, few studies investigated the effect of fermented by-products on the conformational change and interfacial assembly of surfactin. Here, the effect of acetoin, a primary metabolite of Bacillus subtilis, on the conformational change and interfacial assembly of surfactin was studied in detail. Surface tension measurements showed that the critical micelle concentration (CMC) of surfactin increased from 1.14 × 10-5 to 4.32 × 10-5 M in the presence of acetoin. Moreover, acetoin has increased the interfacial tension of surfactin aqueous solution-crude oil from 1.08 mN/m to 3.01 mN/m. Circular dichroism (CD) spectra and dynamic light-scattering (DLS) further demonstrated that acetoin had induced the conformational transition of surfactin from ß-sheet to ß-turn structure, and caused surfactin forming some larger micelle aggregations. Afterwards, it was further found that acetoin decreased the oil sand cleaning efficiency of surfactin from 59.7% to 6.6%, and deteriorated the O/W emulsion stability and altered the silicate wettability toward less water wet state. Based on the experimental results, a possible mechanism of the interaction between surfactin and acetoin was proposed.

Biodegradation of aliphatic and polycyclic aromatic hydrocarbons by the thermophilic bioemulsifier-producing Aeribacillus pallidus strain SL-1.

The utilization of thermophilic hydrocarbon-degrading microorganisms is a suitable strategy for improving biodegradation of petroleum hydrocarbons and PAHs, as well as enhancing oil recovery from high-temperature reservoirs. In this study, the thermophilic strain Aeribacillus pallidus SL-1 was evaluated for the biodegradation of crude oil and PAHs at 60 °C. Strain SL-1 was found to preferentially degrade short-chain n-alkanes (

Biodegradation of Petroleum Hydrocarbons by Bacillus subtilis BL-27, a Strain with Weak Hydrophobicity.

The biodegradation of petroleum hydrocarbons has many potential applications and has attracted much attention recently. The hydrocarbon-degrading bacterium BL-27 was isolated from petroleum-polluted soil and was compounded with surfactants to improve biodegradation. Its 16S rDNA and rpoD gene sequences indicated that it was a strain of Bacillus subtilis. Strain BL-27 had extensive adaptability and degradability within a broad range of temperatures (25-50 °C), pH (4.0-10.0) and salinity (0-50 g/L NaCl). Under optimal conditions (45 °C, pH 7.0, 1% NaCl), the strain was able to degrade 65% of crude oil (0.3%, w/v) within 5 days using GC-MS analysis. Notably, strain BL-27 had weak cell surface hydrophobicity. The adherence rate of BL-27 to n-hexadecane was 29.6% with sucrose as carbon source and slightly increased to 33.5% with diesel oil (0.3%, w/v) as the sole carbon source, indicating that the cell surface of BL-27 is relatively hydrophilic. The strain was tolerant to SDS, Tween 80, surfactin, and rhamnolipids at a concentration of 500 mg/L. The cell surface hydrophobicity reduced more with the addition of surfactants, while the chemical dispersants, SDS (50-100 mg/L) and Tween 80 (200-500 mg/L), significantly increased the strain's ability to biodegrade, reaching 75-80%. These results indicated that BL-27 has the potential to be used for the bioremediation of hydrocarbon pollutants and could have promising applications in the petrochemical industry.

High-Yield Di-Rhamnolipid Production by Pseudomonas aeruginosa YM4 and its Potential Application in MEOR.

Rhamnolipids are a mixture of the homologs species due to variations in the rhamnose units and ß-hydroxy fatty acid moieties, mainly including Rha-C10-C10, Rha-Rha-C10-C10, and Rha-C10. In this study, strain P. aeruginosa YM4 was selected for its capacity to efficiently produce di-rhamnolipid (Rha-Rha-C10-C10) as the predominant component with soybean oil and glycerol as carbon source, accounting for 64.8% and 85.7% of total products, respectively. The critical micelle concentration (CMC) of rhamnolipid products varies with the content of di-rhamnolipid, whereby lower CMC values corresponding to higher di-rhamnolipid contents. The rhamnolipids containing 85.7% di-rhamnolipid had the lowest CMC value of 50 mg/L. Accordingly the viscosity-reducing efficiency and oil-washing efficiency of rhamnolipids increased with higher di-rhamnolipid component. At a concentration of 500 mg/L, the rhamnolipids containing 85.7% di-rhamnolipid worked best and showed 82.5% oil-washing efficiency, which offered great promise for applications in enhanced oil recovery. The results showed the variation of structure and composition of rhamnolipids had a significant effect on their application.