Polyphenolic Compounds in Extracts from Roasted Grapevine Canes: An Investigation for a Circular Approach to Increase Sustainability in the Viticulture Sectors.

In this study, we compared the polyphenolic composition of the roasted grapevine wood chips of four Vitis vinifera cultivars-namely, Sorbara, Grasparossa, Malbo Gentile, and Spergola. These waste byproducts have the potential as infusion chips for the aging of alcoholic beverages and vinegars, contributing to an enriched sensory profile. Roasting amplifies aromatic nuances and triggers the depletion of crucial bioactive compounds, including polyphenols. We investigated the extent of polyphenolic loss in the ethanolic extract of roasted grapevine chips to repurpose this waste byproduct and assess its potential. We assessed the levels of trans-resveratrol, trans-ε-viniferin, trans-piceatannol, and the main resveratrol trimer. Our findings indicated a significant decrease in polyphenol content as the roasting temperature increased, from 16.85-21.12 mg GAE/g for grapevine chips roasted at 120 °C to 3.10-7.77 mg GAE/g for those roasted at 240 °C. This study also highlights notable genotypic differences in polyphenolic content. Among the red grape cultivars analyzed, Sorbara exhibited the highest levels (7.77-21.12 mg/GAEg), whereas the white grape cultivar Spergola showed the lowest polyphenolic content (3.10-16.85 mg/GAEg). These findings not only contribute to the scientific understanding of polyphenol stability but also hold practical implications for the enhancement of aged beverages, as well as advancing sustainable practices in the viticulture industries.

Characterization of Some Stilbenoids Extracted from Two Cultivars of Lambrusco-Vitis vinifera Species: An Opportunity to Valorize Pruning Canes for a More Sustainable Viticulture.

Pruning canes from grape vines are valuable byproducts that contain resveratrol and other health-boosting stilbenoids. This study aimed to assess the effect of roasting temperature on the stilbenoid content of vine canes by comparing two Vitis vinifera cultivars, Lambrusco Ancellotta and Salamino. Samples were collected during different phases of the vine plant cycle. One set was collected in September after the grape harvest and was air-dried and analyzed. A second set was obtained during vine pruning in February and evaluated immediately after collection. The main stilbenoid identified in each sample was resveratrol (~100-2500 mg/kg), with significant levels of viniferin (~100-600 mg/kg) and piceatannol (~0-400 mg/kg). Their contents decreased with increasing roasting temperature and residence time on the plant. This study provides valuable insights into the use of vine canes in a novel and efficient manner, which could potentially benefit different industries. One potential use involves the roasted cane chips to accelerate the aging of vinegars and alcoholic beverages. This method is more efficient and cost-effective than traditional aging, which is slow and unfavorable from an industrial perspective. Furthermore, incorporating vine canes into maturation processes reduces viticulture waste and enhances the final products with health-promoting molecules, such as resveratrol.

Waste By-Product of Grape Seed Oil Production: Chemical Characterization for Use as a Food and Feed Supplement.

Among the waste materials of wine production, grape seeds constitute an important fraction of the pomace, from which the precious edible oil is extracted. The residual mass from oil extraction, the defatted grape seeds (DGS), can be destined for composting or valorized according to the circular economy rules to produce pyrolytic biochar by gasification or pellets for integral energy recovery. Only a small quantity is used for subsequent extraction of polyphenols and tannins. In this study, we performed a chemical characterization of the DGS, by applying spectroscopic techniques (ICP-OES) to determine the metal content, separation techniques (HS-SPME-GC-MS) to evaluate the volatile fraction, and thermal methods of analysis (TGA-MS-EGA) to identify different matrix constituents. Our main goal is to obtain information about the composition of DGS and identify some bioactive compounds constituting the matrix in view of possible future applications. The results suggest that DGS can be further exploited as a dietary supplement, or as an enriching ingredient in foods, for example, in baked goods. Defatted grape seed flour can be used for both human and animal consumption, as it is a source of functional macro- and micronutrients that help in maintaining optimal health and well-being conditions.

Application of experimental design in HPLC method optimisation for the simultaneous determination of multiple bioactive cannabinoids.

The scientific interest in Cannabis sativa L. analysis has been rapidly increasing in recent years, especially for what concerns cannabinoids, plant secondary metabolites which are well known for having many biological properties. High-performance liquid chromatography (HPLC) is frequently used for both the qualitative and quantitative analysis of cannabinoids in plant extracts from C. sativa and its derived products. Many studies have been focused on the main cannabinoids, such as ∆9-tetrahydrocannabinolic acid (∆9-THCA), cannabidiolic acid (CBDA), cannabigerolic acid (CBGA) and their decarboxylated derivatives, such as ∆9-tetrahydrocannabinol (∆9-THC), cannabidiol (CBD) and cannabigerol (CBG). In addition to the abovementioned compounds, the plant produces other metabolites of the same chemical class, and some of them have shown interesting biological activities. In the light of this, it is important to have efficient analytical methods for the simultaneous separation of cannabinoids, which is quite complex since they present similar chemical-physical characteristics. The present work is focused on the use of the Design of Experiments technique (DoE) to develop and optimise an HPLC method for the simultaneous separation of 14 cannabinoids. Experimental design optimisation was applied by using a Central Composite Face-Centered design to achieve the best resolution with minimum experimental trials. Five significant variables affecting the chromatographic separation, including ammonium formate concentration, gradient elution, run time and flow rate, were studied. A multivariate strategy, based on Principal Component Analysis (PCA) and Partial Least Squared (PLS) regression, was used to define the best operative conditions. The developed method allowed for the separation of 12 out of 14 cannabinoids. Due to co-elution phenomena, HPLC coupled with a triple quadrupole mass analyser (HPLC-ESI-MS/MS) was applied, monitoring the specific transitions of each compound in the multiple reaction monitoring (MRM) mode. Finally, the optimised method was applied to C. sativa extracts having a different cannabinoid profile to demonstrate its efficiency to real samples. The methodology applied in this study can be useful for the separation of other cannabinoid mixtures, by means of appropriate optimisation of the experimental conditions.

Comparative Analysis of VOCs from Winter Melon Pomace Fibers before and after Bleaching Treatment with H2O2.

In this study, the trend of Volatile Organic Compounds (VOCs) in dietary fiber samples from the winter melon (Cucumis Melo var. Inodorus, Yellow Canary type) were investigated. This foodstuff, obtained as a by-product of agri-food production, has gained increasing attention and is characterized by many bioactive components and a high dietary-fiber content. As regards fiber, it is poorly colored, but it may be whitened by applying a bleaching treatment with H2O2. The result is a fibrous material for specific applications in food manufacturing, for example, as a corrector for some functional and technological properties. This treatment is healthy and safe for consumers and widely applied in industrial food processes. In this study, a method based on headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography-mass spectrometry (GC-MS) was applied for the characterization of the aromatic profile of the dried raw materials. Furthermore, VOC variation was investigated as function of the bleaching treatment with H2O2. The bleached samples were also analyzed after a long storage period (24 months), to assess their stability over time. As a result, the VOC fraction of the fresh raw fiber showed nine classes of analytes; these were restricted to seven for the bleached fiber at t0 time, and further reduced to four classes at the age of 24 months. Alcohols were the main group detected in the fresh raw sample (33.8 % of the total chromatogram area), with 2,3-butanediol isomers as the main compounds. These analytes decreased with time. An opposite trend was observed for the acids (9.7% at t0), which increased with time and became the most important class in the 24-month aged and bleached sample (57.3%).

Evaluation of the oxidation state and metal concentration in the adipose tissue of Parma ham.

The effect of different dietary fat supplements: A, no added fat; B, 3% added lard and C, 3% added partially hydrogenated lard (PHL), were evaluated in dry cured Parma ham fat by determination of the lipid oxidation indices, R1 and R2, on a total of 30 Italian Landrace×Italian Large White pigs. Furthermore, correlations between lipid oxidation and calcium, magnesium, iron, zinc, copper and nickel concentrations, determined in Parma ham fat, was also investigated. Results highlighted a correlation between the oxidative state of Parma ham fat and the pigs' diet; in particular the addition of 3% PHL led to a more stable depot fat towards lipid oxidation compared to the addition of lard. Finally, Parma ham fat from treatment C showed higher concentrations of Ca (p<0.01) and Mg (p<0.05) compared to those from control, A, and treatment B groups. On the contrary, no significant differences were found for Fe, Zn, Cu and Ni.

Determination of metal concentration in fat supplements for swine nutrition by atomic absorption spectroscopy.

The presence of some essential and toxic metals in fat supplements for swine diet was investigated. Collected samples represented a relevant production of the Italian industry. In particular, some samples were enriched with antioxidants or waste cooking oils. The method for the determination of Ca, Cu, Cd, Fe, Mg, Mn, Ni, Pb, and Zn in fat samples was developed by means of a certified reference material (CRM 186) and a representative fatty sample (RFS). All samples were digested in closed vessels in a microwave oven and then analyzed by flame atomic absorption or graphite furnace atomic absorption spectrometry. The entire analytical method provided a satisfactory repeatability and reproducibility confirmed by agreement between the experimental recovery data obtained for the CRM 186 sample and, with the method of standard additions, for the RFS material. The samples generally showed a small amount of metals compared with the recommended daily intake for the essential elements. On the other hand, some samples contained a significant concentration, from an analytical point of view, of Cd, Ni, and Pb. Principal component analysis (PCA) was applied to inspect the experimental data obtained from samples analysis. Basically no differences were detected in terms of metal concentration among the fat supplements analyzed.

Classification of cereal flours by chemometric analysis of MIR spectra.

Different kinds of cereal flours submitted to various technological treatments were classified on the basis of their mid-infrared spectra by pattern recognition techniques. Classification in the wavelet domain was achieved by using the wavelet packet transform for efficient pattern recognition (WPTER) algorithm, which allowed singling out the most discriminant spectral regions. Principal component analysis (PCA) on the selected features showed an effective clustering of the analyzed flours. Satisfactory classification models were obtained both on training and test samples. Furthermore, mixtures of varying composition of the studied flours were distributed in the PCA space according to their composition.