Structures and diversities of bacterial communities in oil-contaminated soil at shale gas well site assessed by high-throughput sequencing.

Currently, there is limited understanding of the structures and variabilities of bacterial communities in oil-contaminated soil within shale gas development. The Changning shale gas well site in Sichuan province was focused, and high-throughput sequencing was used to investigate the structures of bacterial communities and functions of bacteria in soil with different degrees of oil pollution. Furthermore, the influences of the environmental factors including pH, moisture content, organic matter, total nitrogen, total phosphorus, oil, and the biological toxicity of the soil on the structures of bacterial communities were analyzed. The results revealed that Proteobacteria and Firmicutes predominated in the oil-contaminated soil. α-Proteobacteria and γ-Proteobacteria were the main classes under the Proteobacteria phylum. Bacilli was the main class in the Firmicutes phylum. Notably, more bacteria were only found in CN-5 which was the soil near the storage pond for abandoned drilling mud, including Marinobacter, Balneola, Novispirillum, Castellaniella, and Alishewanella. These bacteria exhibited resilience to higher toxicity and demonstrated proficiency in oil degradation. The functions including carbohydrate transport and metabolism, energy metabolism, replication, recombination and repair replication, signal transduction mechanisms, and amino acid transport and metabolism responded differently to varying concentrations of oil. The disparities in bacterial genus composition across samples stemmed from a complex play of pH, moisture content, organic matter, total nitrogen, total phosphorus, oil concentration, and biological toxicity. Notably, bacterial richness correlated positively with moisture content, while bacterial diversity showed a significant positive correlation with pH. Acidobacteria exhibited a significant positive correlation with moisture content. Litorivivens and Luteimonas displayed a significant negative correlation with pH, while Rhizobium exhibited a significant negative correlation with moisture content. Pseudomonas, Proteiniphilum, and Halomonas exhibited positive correlations not only with organic matter but also with oil concentration. Total nitrogen exhibited a significant positive correlation with Taonella and Sideroxydans. On the other hand, total phosphorus showed a significant negative correlation with Sphingomonas. Furthermore, Sphingomonas, Gp6, and Ramlibacter displayed significant negative correlations with biological toxicity. The differential functions exhibited no significant correlation with environmental factors but displayed a significant positive correlation with the Proteobacteria phylum. Aridibacter demonstrated a significant positive correlation with cell motility and cellular processes and signaling. Conversely, Pseudomonas, Proteiniphilum, and Halomonas were negatively correlated with differential functions, particularly in amino acid metabolism, carbohydrate metabolism, and membrane transport. Compared with previous research, more factors were considered in this research when studying structural changes in bacterial communities, such as physicochemical properties and biological toxicity of soil. In addition, the correlations of differential functions of communities with environmental factors, bacterial phyla, and genera were investigated.

Enhanced biodegradation of oil-contaminated soil oil in shale gas exploitation by biochar immobilization.

The enhanced biodegradation of oil-contaminated soil by fixing microorganisms with corn cob biochar was investigated. It was found that the components of oil in the test soil were mainly straight-chain alkanes and branched alkanes. When using corn cob biochar as a carrier to immobilize microorganisms, the best particle size of corn cob biochar as an immobilization carrier was 0.08 mm, and the best immobilization time was 18 h. SEM analysis confirmed that the microorganisms were immobilized on the corn cob biochar. Immobilized microorganisms exhibited high biodegradability under stress to high concentrations of petroleum pollutants, heavy metals, and organic pollutants. Infrared spectroscopy analysis showed that oxygen-containing groups such as hydroxyl, carboxyl, and methoxy on the surface of biochar were involved in the complexation of heavy metals. The mechanism of immobilization promoted microbial degradation of oil contamination was explained by gas chromatography mass. First, alkanes and aromatics were adsorbed by corn cob biochar and passed to immobilized microorganisms to promote their degradation. Their bioavailability increased, especially for aromatics. Second, biochar provided a more suitable environment for microorganisms to degrade. Third, the conversion of ketones to acids was accelerated during the biodegradation of alkanes, and the biodegradation of alkanes was accelerated by immobilization. The biodegradable efficiency of oil by immobilized microorganisms in soil was 70.10% within 60 days, 28.80% higher than that of free microorganisms. The degradation of immobilized microorganisms was highly correlated with the activities of catalase, urease, and polyphenol oxidase.

Study on the Effect of Petroleum Components on the Elution of Oily Sludge by a Compound Biosurfactant.

Currently, research on oily sludge treatment mainly focuses on optimizing the deoiling effect and research on the deoiling mechanism, and the influence of petroleum components on the properties and treatment of oily sludge is rarely considered. Therefore, in this study, petroleum substances in three types of oil sludge were eluted using the biosurfactant cleaning technology, and the influence of petroleum components on the cleaning process was explored. The results showed that the biosurfactants rhamnolipid and sophorolipid had a synergistic effect, and the oil-removal rate was as high as 92.2% when the SL mass fraction was 0.4 in the compound biosurfactant. Three types of oily sludge, wellsite-landing sludge, pipeline-landing sludge, and tank-bottom sludge, were cleaned by the compound biosurfactant; the results showed that the residual petroleum substance in liquid and solid phases, the turbidity value, and the zeta-potential value of the supernatant of oil sludge samples after cleaning increased with the increase in the heavy components of the oily sludge, and the oil-removal rate decreased gradually. After cleaning, the average relative molecular weight of the three oil phases increased with the heavy components, which was increased by 1.83, 4.83, and 10.72%, respectively, and the increase in molecular weight increased the difficulty of cleaning. After cleaning, the retention time and peak intensity of the oil sample changed significantly, and it had a stronger elution effect on low-molecular-weight alkanes. It was found that the compound biosurfactant had a good elution effect on polycyclic aromatic hydrocarbons, but the increase in the content of heavy components and the increase in aromatic rings increased the difficulty of cleaning. Moreover, it was found that the compound biosurfactant could not completely elute the petroleum substances on the surface of solid particles, and the asphaltene components in the oil phase were more difficult to elute than other components.

Effects of biochar properties on the bioremediation of the petroleum-contaminated soil from a shale-gas field.

The characteristics of biochar carriers prepared from different biomass (corncob, straw, and sawdust) were investigated, and the bioremediation performance of the biochar through microbial immobilization was analyzed. Corncob biochar had the highest specific surface area (157.11-312.30 m2 g-1) among the different biomass, and the specific surface area and total pore volume reached the maximum at 500 °C. The pore size was primarily micropore, which aided to the fixation of microorganisms and the adsorption of petroleum pollutants. With increased pyrolysis temperature, the polar functional groups in biochar decreased, and the aromatic functional groups gradually increased, thereby benefiting the adsorption of hydrophobic organic compounds. Corncob biochar had the highest zeta potential, i.e., from - 30.95 to - 6.43 mV, conducive to the electrostatic adsorption between carrier and microorganism. The highest oil-removal and microbial-immobilization rates of biochar CC500 (with corncob pyrolyzed at 500 °C) were about 70.7% and 71.2%, respectively. A strong recovery of microbial growth activity was also observed; recovery was 83.38% compared with free bacteria, and the fixed microorganisms reached logarithmic-growth period at 8-18 h.

Research of combined adsorption-coagulation process in treating petroleum refinery effluent.

The petroleum refinery industry generates a significant amount of wastewater that contains a high level of organic matter, which calls for effective and costly treatments. In this research, the effectiveness of the petroleum refinery effluent (PRE) treatment with physicochemical process of combined adsorption and coagulation was evaluated. The effects of initial pH, hydraulic condition , and combined sequence of treatment process, different treating reagent types and dosages on the chemical oxygen demand (COD) removal were investigated. Additionally, the elimination efficiency of pollutant wastewater was monitored by gas chromatography-mass spectrometry (GC-MS), and Fourier transformed infrared (FT-IR) spectrophotometer was adopted to describe the structure of the wastewater. Wooden activated carbon was chosen as adsorbent at the dosage of 10 g/L as a primary treatment, and 1500 mg/L polymeric magnesium ferric sulfate was used in coagulation. Results showed that adsorption and subsequent coagulation displayed the best performance when initial pH was 9 at shear rates (G) of G1 = 65 s-1 and G2 = 20 s-1, which reached maximal removal rate of COD and total organic carbon GC-MS testing result revealed that adsorption was effective in phenols and iso-alkanes removal, whereas coagulation was good at removing esters and n-alkanes.