An in vitro study of composites of poly(L-lactide-co-ε-caprolactone), ß-tricalcium phosphate and ciprofloxacin intended for local treatment of osteomyelitis.

Osteomyelitis is a bacterial disease that can become chronic, and treatment often includes a surgical operation to remove infected bone. The aim of this study was to develop and investigate in vitro bone filling composite materials that release ciprofloxacin to kill any remaining bacteria and contain bioceramic to help the bone to heal. Three composites of poly(L-lactide-co-ε-caprolactone), ß-tricalcium phosphate and ciprofloxacin were compounded using twin-screw extrusion and sterilized by gamma irradiation. Drug release and degradation of the composites were investigated in vitro for 52 weeks. The composite with 50 wt% of ß-TCP had the most promising ciprofloxacin release profile. The ceramic component accelerated the drug release that occurred in three phases obeying first-order kinetics. Inhibition zone testing using bioluminescence showed that the released ciprofloxacin had effect in eradicating a common osteomyelitis causing bacteria Pseudomonas aeruginosa. During the in vitro degradation test series, molar weight of the polymer matrix of the composites decreased rapidly. Additionally, (1)H-NMR analysis showed that the polymer had blocky structure and the comonomer ratio changed during hydrolysis. The tested composites showed great potential to be developed into bone filler materials for the treatment of osteomyelitis or other bone related infections.

Processing and sustained in vitro release of rifampicin containing composites to enhance the treatment of osteomyelitis.

The objective in this study was to develop an osteoconductive, biodegradable and rifampicin releasing bone filling composite material for the treatment of osteomyelitis, a bacterial infection of bone that is very difficult and expensive to treat. The composite material will be used together with a ciprofloxacin releasing composite, because of the rapid development of resistant bacteria when rifampicin is used alone. Three composites were manufactured by twin-screw extrusion. The polymer matrix for the composites was poly(L-lactide-co-ε-caprolactone) 70/30 and all the composites contained 8 wt% (weight percent) of rifampicin antibiotic. The ß-TCP contents of the composites were 0 wt%, 50 wt% and 60 wt%. The composites were sterilized by gamma irradiation before in vitro degradation and drug release tests. The hydrolytical degradation of the studied composites proceeded quickly and the molecular weight of the polymer component of the composites decreased rapidly. Rifampicin release occurred in four phases in which the high ß-TCP content of the samples, polymer degradation and mass loss all played a role in determining the phases. The ceramic component was seen to have a positive effect on the drug release. The composite with 50 wt% of ß-TCP showed the most promising rifampicin release profile and it also showed activity against a common osteomyelitis causing bacteria Pseudomonas aeruginosa. A clear inhibition zone was formed in 16 h incubation. Overall, the tested materials showed great potential to be developed into a bone filler material for the treatment of osteomyelitis or other bone related infections in combination with the ciprofloxacin releasing materials.

Self-reinforced ciprofloxacin-releasing polylactide-co-glycolide 80/20 inhibits attachment and biofilm formation by Staphylococcus epidermidis: an in vitro study.

We have observed the efficiency of antibiotic-releasing polylactide-co-glycolide (PLGA) 80/20 in preventing Staphylococcus epidermidis attachment and biofilm formation in vitro. The aim of the present study was to evaluate the effect of self-reinforced (SR) implants with enhanced antibiotic release on bacterial attachment and biofilm formation rates, and also on growth inhibition of Staphylococcus epidermidis. Cylindrical SR-PLGA+AB specimens (length 30 mm, diameter 3 mm) were examined by scanning electron microscopy (SEM) for attachment of S. epidermidis ATCC 35989 on biomaterial surface and formation of biofilm, after incubating with bacterial suspension of ca. 10 cfu/mL for 1, 3, 7, 14 and 21 days. SR-PLGA and SR-PLGA+AB implants were tested on agar plates by measuring the inhibition distance around implants. On the surface of SR-PLGA+AB, at days 1, 3, 7, 14 and 21, the percentage of areas with not a single bacteria attached, was 88.6%, 71.1%, 73.7%, 73.7%, and 68.4%, respectively. On the areas where bacteria were detected, the number of bacterial cells remained low during whole study period, and no significant increase by time was seen. There was no biofilm observed on 97-99% of the examined areas during the whole study period on SR-PLGA+AB. In agar plates, the SR-PLGA+AB showed inhibition of bacterial growth, with (mean) 53.2 mm diameter of inhibition area with peeled implants and 50.5 mm with non-peeled implants. There was no inhibition seen around implants without ciprofloxacin. Bioabsorbable ciprofloxacin-releasing self-reinforced PLGA (SR-PLGA+AB) was superior to plain SR-PLGA in preventing bacterial attachment, biofilm formation, and also the growth of Staphylococcus epidermidis.

In vitro and in vivo testing of bioabsorbable antibiotic containing bone filler for osteomyelitis treatment.

The use of local antibiotics from a biodegradable implant is appealing concept for treatment of chronic osteomyelitis. Our aim was to develop a new drug delivery system based on controlled ciprofloxacin release from poly(D/L-lactide). Cylindrical composite pellets (1.0 x 0.9 mm) were manufactured from bioabsorbable poly(D/L-lactide) matrix and ciprofloxacin (7.4 wt %). In vitro studies were carried out to delineate the release profile of the antibiotic and to verify its antimicrobial activity by means of MIC testing. A long-term study in rabbits was performed to validate the release of ciprofloxacin from the composite in vivo. Therapeutic level of ciprofloxacin (>2 microg/mL) was maintained between 60 and 300 days and the concentration remained below the potentially detrimental level of 20 microg/mL in vitro. The released ciprofloxacin had retained its antimicrobial properties against common pathogens. In an exploratory long-term in vivo study with three rabbits, ciprofloxacin could not be detected from the serum after moderate filling (160 mg) of the tibia (follow-up 168 days), whereas after high dosing (a total dose of 1,000 mg in both tibias) ciprofloxacin was found temporarily at low serum concentrations (14-34 ng/mL) during the follow-up of 300 days. The bone concentrations of ciprofloxacin could be measured in all samples at 168 and 300 days. The tested copolylactide matrix seems to be a promising option in selection of resorbable carriers for sustained release of antibiotics, but the composite needs modifications to promote ciprofloxacin release during the first 60 days of implantation.

Efficacy of ciprofloxacin-releasing bioabsorbable osteoconductive bone defect filler for treatment of experimental osteomyelitis due to Staphylococcus aureus.

The concept of local antibiotic delivery via biodegradable bone defect fillers with multifunctional properties for the treatment of bone infections is highly appealing. Fillers can be used to obliterate surgical dead space and to provide targeted local bactericidal concentrations in tissue for extended periods. Eventually, the osteoconductive component of the filler could guide the healing of the bone defect. The present experimental study was carried out to test this concept in a localized Staphylococcus aureus osteomyelitis model in the rabbit (n = 31). A metaphyseal defect of the tibia was filled with a block of bone cement, followed by insertion of a bacterial inoculum. After removal of the bone cement and surgical debridement at 2 weeks, the defect was filled with a ciprofloxacin-containing (7.6% +/- 0.1%, by weight) composite (treated-infection group) or with a composite without antibiotic (sham-treated group). Both a positive control group (untreated-infection group) and a negative control group were also produced. The treatment response, monitored by positron emission tomography (PET) with fluorine-18-labeled fluorodeoxyglucose ([18F]FDG) at 3 and 6 weeks, showed rapidly decreasing amounts of [18F]FDG uptake in the treated-infection group (P = 0.001 compared with the results for the untreated-infection group at 6 weeks). The bacteriological analysis confirmed the eradication of the bone pathogen in the treated-infection group. However, three animals had culture-positive soft tissue infections. All animals in the sham-treated and untreated-infection groups had culture-positive bone infections with typical radiographic changes of osteomyelitis. Histomorphometry, peripheral quantitative computed tomography, and backscattered electron imaging of scanning electron microscopy images verified the osteoconductive properties of the bioactive glass microspheres within the composite. The median bone ciprofloxacin concentrations were 1.2 and 2.1 microg/g at two anatomic locations of the tibia. This is the first report to show the value of [18F]FDG PET for quantitative monitoring of the treatment response in bone infections. The collaborative results of bacteriologic and [18F-FDG] PET studies showed that use of the multifunctional composite was successful for eradication of the S. aureus pathogen from bone.

Holding power of bioabsorbable ciprofloxacin-containing self-reinforced poly-L/DL-lactide 70/30 bioactive glass 13 miniscrews in human cadaver bone.

Antibiotics-plus bioactive glass-containing bioabsorbable self-reinforced (SR) polylactide screws have been developed for antibacterial osteoconductive bone fixation. The aim of the present study was to test the pullout properties of these recently developed miniscrews. Ciprofloxacin-plus bioactive glass-containing SR-polylactide miniscrews (BC) were compared with miniscrews made of neat SR-polylactide (A), SR-polylactide with bioactive glass (B), and ciprofloxacin-containing SR-polylactide (C). BC miniscrews and their controls (A, B, C) (all of length 6.0 mm, core diameter 1.45 mm, thread diameter 2.0 mm) were applied to one pair of cadaveric fibulae. Pullout force was measured using a materials testing machine. We carried out 49-50 pullout tests for each implant type. The Mann-Whitney test and Student's t-test were used for statistical evaluation. The pullout force for BC miniscrews was 114.9 +/- 34.0 (SD) N. Pullout forces for control miniscrews were 162.7 +/- 37.8 N (A), 99.1 +/- 16.2 N (B), and 142.9 +/- 26.9 N (C). Differences between the four groups were statistically significant (p < 0.001). Ciprofloxacin-plus bioactive glass-containing polylactide miniscrews have good holding power to human cadaver fibulae. However, adding bioactive glass and ciprofloxacin components to neat SR-polylactide results in lower pullout values.