Omentin-1 inhibits the development of benign prostatic hyperplasia by attenuating local inflammation.

BACKGROUND: Benign prostatic hyperplasia (BPH) is a prevalent disease affecting elderly men, with chronic inflammation being a critical factor in its development. Omentin-1, also known as intelectin-1 (ITLN-1), is an anti-inflammatory protein primarily found in the epithelial cells of the small intestine. This study aimed to investigate the potential of ITLN-1 in mitigating BPH by modulating local inflammation in the prostate gland. METHODS: Our investigation involved two in vivo experimental models. Firstly, ITLN-1 knockout mice (Itln-1-/-) were used to study the absence of ITLN-1 in BPH development. Secondly, a testosterone propionate (TP)-induced BPH mouse model was treated with an ITLN-1 overexpressing adenovirus. We assessed BPH severity using prostate weight index and histological analysis, including H&E staining, immunohistochemistry, and enzyme-linked immunosorbent assay. In vitro, the impact of ITLN-1 on BPH-1 cell proliferation and inflammatory response was evaluated using cell proliferation assays and enzyme-linked immunosorbent assay. RESULTS: In vivo, Itln-1-/- mice exhibited elevated prostate weight index, enlarged lumen area, and higher TNF-α levels compared to wild-type littermates. In contrast, ITLN-1 overexpression in TP-induced BPH mice resulted in reduced prostate weight index, lumen area, and TNF-α levels. In vitro studies indicated that ITLN-1 suppressed the proliferation of prostate epithelial cells and reduced TNF-α production in macrophages, suggesting a mechanism involving the inhibition of macrophage-mediated inflammation. CONCLUSION: The study demonstrates that ITLN-1 plays a significant role in inhibiting the development of BPH by reducing local inflammation in the prostate gland. These findings highlight the potential of ITLN-1 as a therapeutic target in the management of BPH.

Molecular dynamics simulation on water/oil interface with model asphaltene subjected to electric field.

HYPOTHESIS: The droplet-medium interfaces of petroleum emulsions are often stabilized by the indigenous surface-active compounds (e.g., asphaltenes), causing undesired issues. While demulsification by electric field is a promising technique, fundamental study on the droplet-medium interface influenced by electric field is limited. Molecular dynamics (MD) simulations are expected to provide microscopic insights into the nano-scaled water/oil interface. METHODS: MD simulations are conducted to study the adsorption of model asphaltene molecules (represented by N-(1-hexylheptyl)-N'-(5-carboxylicpentyl) perylene-3,4,9,10-tetracarboxylic bisimide (C5Pe)) on a water-toluene interface under various strengths of electric field. The adsorption amount and structural feature of C5Pe molecules at water-toluene interface are investigated, and the effects of electric field and salt are discussed. FINDINGS: C5Pe molecules tend to adsorb on the water-oil interface. As the electric field strength increases, the adsorption amount first slightly increases (or remains constant) and then decreases. The electric field disrupts the compact π-π stacking between C5Pe molecules and increases their mobility, causing a dispersed distribution of the molecules with a wide range of orientations relative to the interface. Within the studied range, the addition of salt ions appears to stabilize the interface at high electric field. These results provide useful insights into the mechanism and feasibility of demulsification under electric field.

Alisol B 23-acetate, a new promoter for cholesterol efflux from dendritic cells, alleviates dyslipidemia and inflammation in advanced atherosclerotic mice.

Atherosclerosis (AS) is characterized by dyslipidemia and chronic inflammation. In the high-fat environment, the lipid metabolism of dendritic cells (DCs) is abnormal, which leads to abnormal immune function, promotes the occurrence of immune inflammatory reactions, and promotes the development of AS. Alisol B 23-acetate (23B) is a triterpenoid in the rhizomes of Alisma, which is a traditional Chinese medicine. Here, we identified cholesterol metabolism-related targets of 23B through a virtual screen, and further transcriptome analysis revealed that 23B can change antigen presentation and cholesterol metabolism pathways in cholesterol-loaded DCs. In vitro experiments confirmed that 23B promoted cholesterol efflux from ApoE-/- DCs, reduced the expression of MHC II, CD80, and CD86, and inhibited the activation of CD4+ T cells and the production of inflammatory cytokines IL-12 and IFN-γ. In advanced AS mice, 23B can decrease triacylglycerol (TG) levels and increase high-density lipoprotein-cholesterol (HDL-C) levels in plasma and the expression of cholesterol efflux genes in the aorta. Neither helper T cells 1 (Th1) nor regulatory T cells (Tregs) in peripheral blood changed significantly in the presence of 23B, but 23B reduced the levels of IL-12 and IFN-γ in serum. However, 23B did not change the total cholesterol (TC) and low-density lipoprotein-cholesterol (LDL-C) levels in serum or lipid accumulation in the aorta. Moreover, 23B did not increase the production of IL-10 and TGF-ß1 in vivo or in vitro. These results indicate that 23B promotes cholesterol efflux from DCs, which can improve the immune inflammatory response and contribute to controlling the inflammatory status of AS.

Probing the intermolecular interaction mechanisms between humic acid and different substrates with implications for its adsorption and removal in water treatment.

Humic substance is a ubiquitous class of natural organic matter (NOM) in soil and aquatic ecosystems, which severely affects the terrestrial and aquatic environments as well as water-based engineering systems by adsorption on solids (e.g., soil minerals, nanoparticles, membranes) via different interaction mechanisms. Herein, the chemical force microscopy (CFM) technique was employed to quantitatively probe the intermolecular forces of humic acid (HA, a representative humic substance) interacting with self-assembled monolayers (SAMs, i.e., OH-SAMs, CH3-SAMs, NH2-SAMs and COOH-SAMs) in various aqueous environments at the nanoscale. The interaction forces measured during approach could be well fitted by the extended Derjaguin-Landau-Verwey-Overbeek (DLVO) theory by incorporating the hydrophobic interaction. The average adhesion energy followed the trend as: NH2-SAMs (∼3.11 mJ/m2) > CH3-SAMs (∼2.03 mJ/m2) > OH-SAMs (∼1.38 mJ/m2) > COOH-SAMs (∼0.52 mJ/m2) in 100 mM NaCl at pH 5.8, indicating the significant role of electrostatic attraction in contributing to the HA adhesion, followed by hydrophobic interaction and hydrogen bonding. The adhesion energy was found to be dependent on NaCl concentration, Ca2+ addition and pH. For the interaction between NH2-SAMs and HA, their electrostatic attraction at pH 5.8 turned to repulsion under alkaline condition which led to the sudden drop of adhesion energy. Such results promised the adsorption and release of HA using the recyclable magnetic Fe3O4 nanoparticles coated with (3-aminopropyl)tiethoxysilane (APTES). This work provides quantitative information on the molecular interaction mechanism underlying the adsorption of HA on solids of varying surface chemistry at the nanoscale, with useful implications for developing effective chemical additives to remove HA in water treatment and many other engineering processes.

Surface Forces and Interaction Mechanisms of Emulsion Drops and Gas Bubbles in Complex Fluids.

The interactions of emulsion drops and gas bubbles in complex fluids play important roles in a wide range of biological and technological applications, such as programmable drug and gene delivery, emulsion and foam formation, and froth flotation of mineral particles. In this feature article, we have reviewed our recent progress on the quantification of surface forces and interaction mechanisms of gas bubbles and emulsion drops in different material systems by using several complementary techniques, including the drop/bubble probe atomic force microscope (AFM), surface forces apparatus (SFA), and four-roll mill fluidic device. These material systems include the bubble-self-assembled monolayer (SAM), bubble-polymer, bubble-superhydrophobic surface, bubble-mineral, water-in-oil and oil-in-water emulsions with interface-active components in oil production, and oil/water wetting on polyelectrolyte surfaces. The bubble probe AFM combined with reflection interference contrast microscopy (RICM) was applied for the first time to simultaneously quantify the interaction forces and spatiotemporal evolution of a confined thin liquid film between gas bubbles and solid surfaces with varying hydrophobicity. The nanomechanical results have provided useful insights into the fundamental interaction mechanisms (e.g., hydrophobic interaction in aqueous media) at gas/water/solid interfaces, the stabilization/destabilization mechanisms of emulsion drops, and oil/water wetting mechanisms on solid surfaces. A long-range hydrophilic attraction was found between water and polyelectrolyte surfaces in oil, with the strongest attraction for polyzwitterions, contributing to their superior water wettability in oil and self-cleaning capability of oil contamination. Some remaining challenges and future research directions are discussed and provided.

Formation of supported bilayers on silica substrates.

We have investigated the formation of phospholipid bilayers of the neutral (zwitterionic) lipid dimyristoyl-phosphatidylcholine (DMPC) on various glass surfaces from vesicles in various aqueous solutions and temperatures using a number of complementary techniques: the surface forces apparatus (SFA), quartz crystal microbalance (QCM), fluorescence recovery after photobleaching (FRAP), fluorescence microscopy, and streaming potential (SP) measurements. The process involves five stages: vesicle adhesion to the substrate surfaces via electrostatic and van der Waals forces, steric interactions with neighboring vesicles, rupture, spreading via hydrophobic fusion of bilayer edges, and ejection of excess lipid, trapped water, and ions into the solution. The forces between DMPC bilayers and silica were measured in the SFA in phosphate buffered saline (PBS), and the adhesion energy was found to be 0.5-1 mJ/m(2) depending on the method of bilayer preparation. This value is stronger than the expected adhesion predicted by van der Waals interactions. Theoretical analysis of the bilayer-silica interaction shows that the strong attraction is likely due to an attractive electrostatic interaction between the uncharged bilayer and negatively charged silica owing to the surfaces interacting at "constant potential." However, the bilayer-silica interaction in distilled water was found to be repulsive at all distances, which is attributed to the surfaces interacting at "constant charge." These results are consistent with QCM measurements that show vesicles readily forming bilayers on silica in high salt but only weakly adhering in low salt conditions. We conclude that the electrostatic interaction is the most important interaction in determining the adhesion between neutral bilayers and charged hydrophilic surfaces. SP and FRAP experiments gave insights into the bilayer formation process as well as information on the surface coverage, lateral diffusion of the lipid molecules, and surface potential of the bilayers during the spreading process.