Current role of magnetic resonance imaging on assessing and monitoring the efficacy of phototherapy.

Phototherapy, also known as photobiological therapy, is a non-invasive and highly effective physical treatment method. Its broad use in clinics has led to significant therapeutic results. Phototherapy parameters, such as intensity, wavelength, and duration, can be adjusted to create specific therapeutic effects for various medical conditions. Meanwhile, Magnetic Resonance Imaging (MRI), with its diverse imaging sequences and excellent soft-tissue contrast, provides a valuable tool to understand the therapeutic effects and mechanisms of phototherapy. This review explores the clinical applications of commonly used phototherapy techniques, gives a brief overview of how phototherapy impacts different diseases, and examines MRI's role in various phototherapeutic scenarios. We argue that MRI is crucial for precise targeting, treatment monitoring, and prognosis assessment in phototherapy. Future research and applications will focus on personalized diagnosis and monitoring of phototherapy, expanding its applications in treatment and exploring multimodal imaging technology to enhance diagnostic and therapeutic precision and effectiveness.

Hybrid Materials Obtained by Immobilization of Biosynthesized Ag Nanoparticles with Antioxidant and Antimicrobial Activity.

Ag nanoparticles (AgNPs) were biosynthesized using sage (Salvia officinalis L.) extract. The obtained nanoparticles were supported on SBA-15 mesoporous silica (S), before and after immobilization of 10% TiO2 (Degussa-P25, STp; commercial rutile, STr; and silica synthesized from Ti butoxide, STb). The formation of AgNPs was confirmed by X-ray diffraction. The plasmon resonance effect, evidenced by UV-Vis spectra, was preserved after immobilization only for the sample supported on STb. The immobilization and dispersion properties of AgNPs on supports were evidenced by TEM microscopy, energy-dispersive X-rays, dynamic light scattering, photoluminescence and FT-IR spectroscopy. The antioxidant activity of the supported samples significantly exceeded that of the sage extract or AgNPs. Antimicrobial tests were carried out, in conditions of darkness and white light, on Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli and Candida albicans. Higher antimicrobial activity was evident for SAg and STbAg samples. White light increased antibacterial activity in the case of Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa). In the first case, antibacterial activity increased for both supported and unsupported AgNPs, while in the second one, the activity increased only for SAg and STbAg samples. The proposed antibacterial mechanism shows the effect of AgNPs and Ag+ ions on bacteria in dark and light conditions.

Effects of various beverages on characteristics of provisional restoration materials.

OBJECTIVE: To investigate the effect of common beverages on four currently used provisional restoration materials: Protemp®4, Integrity®, polymethyl methacrylate (PMMA) block, and acrylic resin. Flowable resin composite is included as a control group. MATERIALS AND METHODS: Each material was formed into disks of 10-mm diameter and 4-mm thickness (N = 40) by loading the material into acrylic molds. The exposed surface in the mold was covered using a glass slide to prevent an oxygen inhibition layer, and polymerization then proceeded. The solidified disks were placed in distilled water for 24 h. These samples (n = 8) were then immersed for 14 days in one of four different beverages: water, orange juice, cola, and coffee. Changes in color dimension, hardness, and roughness were observed and then analyzed using two-way repeated analysis of variance. RESULTS: The provisional materials had more obvious changes in all three color dimensions than the flowable resin composite. Integrity showed the biggest changes, followed by acrylic resin and PMMA block, whereas Protemp had the smallest changes. The hardness of all the materials significantly decreased after immersion in any of the beverages for 14 days. There were no changes in surface roughness when the materials were immersed in distilled water. The surface roughness of the PMMA block significantly decreased in orange juice whereas that of Integrity and acrylic resin significantly increased in cola. CONCLUSION: Different kinds of provisional materials had different degrees of staining due to their composition. Moisture had a significant influence on the hardness of materials, and the acidity of cola significantly roughened the surface of the provisional materials.

The Birth of the Contextual Health Education Readability Score in an Examination of Online Influenza Patient Education Materials.

Introduction Influenza is a major global health concern, with its rapid spread and mutation rate posing significant challenges in public health education and communication. Effective patient education materials (PEMs) are crucial for informed decision-making and improved health outcomes. This study evaluates the efficacy of online influenza PEMs using traditional readability tools and introduces the Contextual Health Education Readability Score (CHERS) to address the limitations of existing methods that do not capture the diverse array of visual and thematic means displayed. Materials and methods A comprehensive search was conducted to select relevant online influenza PEMs. This involved looking through Google's first two pages of results sorted by relevance, for a total of 20 results. These materials were evaluated using established readability tools (e.g., Flesch Reading Ease, Flesch-Kincaid Grade Level) and the Patient Education Materials Assessment Tool (PEMAT) for understandability and actionability. The study also involved the creation of CHERS, integrating factors such as semantic complexity, cultural relevance, and visual aid effectiveness. The development of CHERS included weighting each component based on its impact on readability and comprehension. Results The traditional readability tools demonstrated significant variability in the readability of the selected materials. The PEMAT analysis revealed general trends toward clarity in purpose and use of everyday language but indicated a need for improvement in summaries and visual aids. The CHERS formula was calculated as follows: CHERS = (0.4 × Average Sentence Length) + (0.3 × Average Syllables per Word) + (0.15 × Semantic Complexity Score) + (0.1 × Cultural Relevance Score) + (0.05 × Visual Aid Effectiveness Score), integrating multiple dimensions beyond traditional readability metrics. Discussion The study highlighted the limitations of traditional readability tools in assessing the complexity and cultural relevance of health information. The introduction of CHERS addressed these gaps by incorporating additional dimensions crucial for understanding in a healthcare context. The recommendations provided for creating effective influenza PEMs focused on language simplicity, cultural sensitivity, and actionability. This may enable further research into evaluating current PEMs and clarifying means of creating more effective content in the future. Conclusions The study underscores the need for comprehensive readability assessments in PEMs. The creation of CHERS marks a significant advancement in this field, providing a more holistic approach to evaluating health literacy materials. Its application could lead to the development of more inclusive and effective educational content, thereby improving public health outcomes and reducing the global burden of influenza. Future research should focus on further validating CHERS and exploring its applicability to other health conditions.

[Natural 5α-reductase inhibitors in treatment of benign prostatic hyperplasia].

Benign prostatic hyperplasia(BPH) is a common disease of the male urinary system, and its incidence rate in China is increasing. However, the mechanism underlying the pathogenesis of BPH remains unclear. Some studies demonstrated that the incidence of BPH was related to the change in the levels of steroid hormones. Too high content of dihydrotestosterone(DHT) in the body may cause BPH and other related diseases. Testosterone(T) is converted to DHT by 5α-reductase(SRD5A). By inhibiting the activity of this enzyme, the production of DHT can be reduced, and then the incidence of BPH can be lowered. Therefore, it has drawn great attention to screen and discover safer and more effective 5α-reductase inhibitors from natural medicines to treat prostatic hyperplasia without affecting the physiological function of men. This review summarizes the characteristics and tissue distribution of 5α-reductase, the discovery of 5α-reductase inhibitors in traditional Chinese medicine and natural medicines, 5α-reductase inhibitors commonly used in clinical practice and their side effects, as well as the animal models of prostatic hyperplasia and common detection indicators, aiming to provide a reference for more in-depth understanding and research about BPH and development of drugs.

[Study on changes of Styrax varieties].

Styrax is a commonly used imported traditional Chinese medicinal material in China. It was introduced to China in the Han Dynasty and was first described as a traditional Chinese medicine in Miscellaneous Records of Famous Physicians(Ming Yi Bie Lu). In this paper, by combing ancient and modern Chinese and foreign herbal medicine books and modern literature, combined with the results of field investigations on the origin of Styrax, the changes of Styrax involving the name, quality evaluation, origin, place of origin, and harvesting and processing were systematically verified. The results show that since ancient times, the origin and place of origin of Styrax have been unclear. The medical scientists of all dynasties in China have evaluated the quality of Styrax from four aspects: texture, viscosity, odor concentration, and color. The varieties of Styrax changed twice. The first change may have occurred during the Sui and Tang Dynasties, and the base changed from Styrax officinalis to Liquidambar orientalis. The second change was in modern times, and the base changed from L. orientalis to L. styraciflua. At the same time, the place of origin changed for the first time, from Turkey, Syria, and other countries in southern Asia Minor to Honduras, Guatemala, and other countries in Central America and southern North America. This paper studied the historical evolution of Styrax in terms of quality evaluation, origin, place of origin, character, and harvesting and processing. At the same time, it summarized the application of Styrax in the western countries, which can provide a historical basis for the further development and utilization of Styrax.

[Scientific connotation of temperature control in processing of Chinese medicinal materials based on theory of quality evaluation through morphological identification].

Processing of Chinese medicinal materials is an important part in the Chinese medicine heritage, and the temperature control in the processing has a direct impact on the quality and efficacy of traditional Chinese medicines. However, the processing of Chinese medicinal materials has the problems of subjective temperature judgement, determination of the end point based on experience, unclear processing mechanism, unstable quality of products, and inconsistent processing standards. The temperature control in the processing is reflected in the appearance and internal quality of Chinese medicinal materials. The theory of quality evaluation through morphological identification is developed based on the comprehensive evaluation of the shape, color, taste, and components, which is associated with the temperature control in the processing. To solve the problems above, this paper puts forward the following solutions. The first is literature mining. By review of the ancient medical works and pharmaceutical experience, the temperature control in processing and the evolution of processing methods can be revealed. Second, according to the ancient method, the processing principle can be explored, on the basis of which the processing technology can be innovated. Third, the standard operating procedure(SOP) should be established to quantify the fire temperature, providing a theoretical basis for the formulation of Chinese medicinal material processing standards. Moreover, it provides a basis for improving the quality of processed products and increasing the safety and effectiveness of traditional Chinese medicines.

Research on Chinese medicinal materials cultivation: A bibliometric and visual analysis.

Chinese medicinal materials (CMMs) are important strategic resource in China. The cultivation process of medicinal plants is the key link which directly affect the quality and efficacy. The literatures of CMMs cultivation were acquired from China National Knowledge Infrastructure (CNKI) database and State Intellectual Property Office (SIPO) patent database for the years between 2001 and 2021. All the articles found were subjected to bibliometric analysis. The development trends and key topics were analyzed and visualized by VOSviewer and CiteSpace software. The results indicate that ecological planting, under-forest economy, intercropping patterns and industrialization production are the research hotspots in this field; cultivation technology and nutritional fertilization technology are the main areas addressed in recent years. Therefore, the high-quality and sustainable development of CMMs cultivation should be examined in terms of theoretical approaches, technical innovation, multi-cooperation, and intellectual property protection.

Herbal-Based Green Synthesis of TB-ZnO-TiO(II) Nanoparticles Composite From Terminalia bellirica: Characterization, Toxicity Assay, Antioxidant Assay, and Antimicrobial Activity.

Background Terminalia bellirica leaf extract was used as an herbal to get an aqueous extract of Tb-ZnO-TiO2 (zinc and titanium dioxide) nanoparticles composite, and this was subsequently subjected to an analysis of its antioxidant properties and possible antimicrobial activity against gram-negative and gram-positive bacteria. Employing the 2,2-Diphenyl-1-picrylhydrazyl and hydrogen peroxide assay techniques for antioxidant properties. In addition to their biocompatibility, rapid biodegradability, and low toxicity, herbal-based nanoparticles (Tb-ZnO-TiO2 NPs composite) synthesized by T. bellirica have drawn a lot of interest as promising options for administering drugs and effective antimicrobial applications. Materials and methods The form and dimensions of the dispersion of the synthesized nanoparticles were investigated through scanning electron microscopy (SEM), Fourier Transform Infrared Spectroscopy, and UV-visible for particle characterization. Nanoparticles were analyzed for antimicrobial activity using the well diffusion method. Ascorbic acid and vitamin E were used as two separate controls for antioxidant assay with different concentrations, and also toxicity assay was done by using zebrafish embryos. Results Tb-ZnO-TiO2 NPs composite were obtained as a powder, the X-beam diffraction (XRD) result revealed a small quantity of impurities and revealed that the structure was spherical in nature. A unique absorption peak for Tb-ZnO-TiO2 NPs composite may be seen in UV-Vis spectroscopy which is in the region of 260 to 320 nm. The Tb-ZnO-TiO2 NPs composite antibacterial efficacy was evaluated and showed noted antibacterial activity and free radical scavenging activity with less toxicity. Conclusion The results demonstrated the Tb-ZnO-TiO2 NPs composite has strong antioxidant qualities and enormous antibacterial activity obtained from T. bellirica extract. Therefore, the Tb-ZnO-TiO2 NPs composite synthesized nanoparticles can be used in biomedical applications as an effective antioxidant and antibacterial reagent.

Laser-Synthesized Germanium Nanoparticles as Biodegradable Material for Near-Infrared Photoacoustic Imaging and Cancer Phototherapy.

Biodegradable nanomaterials can significantly improve the safety profile of nanomedicine. Germanium nanoparticles (Ge NPs) with a safe biodegradation pathway are developed as efficient photothermal converters for biomedical applications. Ge NPs synthesized by femtosecond-laser ablation in liquids rapidly dissolve in physiological-like environment through the oxidation mechanism. The biodegradation of Ge nanoparticles is preserved in tumor cells in vitro and in normal tissues in mice with a half-life as short as 3.5 days. Biocompatibility of Ge NPs is confirmed in vivo by hematological, biochemical, and histological analyses. Strong optical absorption of Ge in the near-infrared spectral range enables photothermal treatment of engrafted tumors in vivo, following intravenous injection of Ge NPs. The photothermal therapy results in a 3.9-fold reduction of the EMT6/P adenocarcinoma tumor growth with significant prolongation of the mice survival. Excellent mass-extinction of Ge NPs (7.9 L g-1 cm-1 at 808 nm) enables photoacoustic imaging of bones and tumors, following intravenous and intratumoral administrations of the nanomaterial. As such, strongly absorbing near-infrared-light biodegradable Ge nanomaterial holds promise for advanced theranostics.

Identifying optical microscope images of CVD-grown two-dimensional MoS2 by convolutional neural networks and transfer learning.

Background: In Complementary Metal-Oxide Semiconductor (CMOS) technology, scaling down has been a key strategy to improve chip performance and reduce power losses. However, challenges such as sub-threshold leakage and gate leakage, resulting from short-channel effects, contribute to an increase in distributed static power. Two-dimensional transition metal dichalcogenides (2D TMDs) emerge as potential solutions, serving as channel materials with steep sub-threshold swings and lower power consumption. However, the production and development of these 2-dimensional materials require some time-consuming tasks. In order to employ them in different fields, including chip technology, it is crucial to ensure that their production meets the required standards of quality and uniformity; in this context, deep learning techniques show significant potential. Methods: This research introduces a transfer learning-based deep convolutional neural network (CNN) to classify chemical vapor deposition (CVD) grown molybdenum disulfide (MoS2) flakes based on their uniformity or the occurrence of defects affecting electronic properties. Acquiring and labeling a sufficient number of microscope images for CNN training may not be realistic. To address this challenge, artificial images were generated using Fresnel equations to pre-train the CNN. Subsequently, accuracy was improved through fine-tuning with a limited set of real images. Results: The proposed transfer learning-based CNN method significantly improved all measurement metrics with respect to the ordinary CNNs. The initial CNN, trained with limited data and without transfer learning, achieved 68% average accuracy for binary classification. Through transfer learning and artificial images, the same CNN achieved 85% average accuracy, demonstrating an average increase of approximately 17%. While this study specifically focuses on MoS2 structures, the same methodology can be extended to other 2-dimensional materials by simply incorporating their specific parameters when generating artificial images.

Multi-Layer Palladium Diselenide as a Contact Material for Two-Dimensional Tungsten Diselenide Field-Effect Transistors.

Tungsten diselenide (WSe2) has emerged as a promising ambipolar semiconductor material for field-effect transistors (FETs) due to its unique electronic properties, including a sizeable band gap, high carrier mobility, and remarkable on-off ratio. However, engineering the contacts to WSe2 remains an issue, and high contact barriers prevent the utilization of the full performance in electronic applications. Furthermore, it could be possible to tune the contacts to WSe2 for effective electron or hole injection and consequently pin the threshold voltage to either conduction or valence band. This would be the way to achieve complementary metal-oxide-semiconductor devices without doping of the channel material.This study investigates the behaviour of two-dimensional WSe2 field-effect transistors with multi-layer palladium diselenide (PdSe2) as a contact material. We demonstrate that PdSe2 contacts favour hole injection while preserving the ambipolar nature of the channel material. This consequently yields high-performance p-type WSe2 devices with PdSe2 van der Waals contacts. Further, we explore the tunability of the contact interface by selective laser alteration of the WSe2 under the contacts, enabling pinning of the threshold voltage to the valence band of WSe2, yielding pure p-type operation of the devices.

Statistical analysis of VEXLPE wear against alumina produced by a new 200-station, multidirectional pin-on-disk device.

With low wear rates shown by contemporary bearing materials of total hip prostheses, the standard deviation of wear rate is relatively high. Therefore, large sample sizes are needed for an adequate power of test. Because wear tests take a long time, it is practical to test several samples simultaneously. A new high-capacity, multidirectional wear test device, called the SuperCTPOD-200, was introduced. A 3 million-cycle wear test with an unprecedented sample size of 200 was performed for VEXLPE. The duration of the test was 6 weeks. The wear factor was normally distributed with a mean ± SD of 1.64 × 10-7 mm3/Nm ± 0.22 × 10-7 mm3/Nm (n = 200). The observation that SD was 13.1% of the mean can be useful in power analyses of future tests with other highly cross-linked polyethylenes. Burnishing was the most typical feature on the worn pins, which was in agreement with clinical findings on retrieved acetabular liners. The present study emphasizes statistics that often plays a minor role only in wear studies.

Tuning Germanane Band Gaps via Cyanoethyl Functionalization for Cutting-Edge Photoactive Cathodes: Photoenhanced Hybrid Zinc-Ion Capacitor Evaluation.

Energy harvesting and storing by dual-functional photoenhanced (photo-E) energy storage devices are being developed to battle the current energy hassles. In this research work, our investigations on the photoinduced efficiency of germanane (Ge-H) and its functionalized analogue cyanoethyl (Ge-C2-CN) are assessed as photocathodes in photo-E hybrid zinc-ion capacitors (ZICs). The evaluated self-powered photodetector devices made by these germanene-based samples revealed effective performances in photogenerated electrons and holes. The photo-E ZICs findings provided a photoinduced capacitance enhancement of ∼52% (for Ge-H) and ∼26% (for Ge-C2-CN) at a scan rate of 10 mV s-1 under 100 mW cm-2 illumination with 435 nm wavelength. Further characterizations demonstrated that the photo-E ZIC with Ge-C2-CN supply higher specific capacitance (∼6000 mF g-1), energy density (∼550 mWh kg-1), and power density (∼31,000 mW kg-1), compared to the Ge-H. In addition, capacitance retention of photo-E ZIC with Ge-C2-CN is ∼91% after 3000 cycles which is almost 6% greater than Ge-H. Interestingly, the photocharging voltage response in photo-E ZIC made by Ge-C2-CN is 1000 mV, while the photocharging voltage response with Ge-H is approximately 970 mV. The observed performances in Ge-H-based photoactive cathodes highlight the pivotal role of such two-dimensional materials to be applied as single architecture in new unconventional energy storage systems. They are particularly noteworthy when compared to the other advanced photo-E supercapacitors and could even be enhanced greatly with other suitable inorganic and organic functional precursors.

Recycling drinking water treatment sludge in construction and building materials: A review.

Drinking water treatment sludge (DWTS) is a by-product of water treatment, and it is difficult to recycle to high value and poses potential environmental risks. Recycling DWTS into cement-based materials is an effective measure to achieve its high-volume utilization and reduce its environmental load. DWTS is rich in silica-alumina phases and has potential pozzolanic activity after drying, grinding and calcination, giving it similar properties to traditional supplementary cementitious materials. Adjusting the sludge production process and coagulant type will change its physical and chemical properties. Adding a small amount of DWTS can generate additional hydration products and refine the pore structure of the cement sample, thus improving the mechanical properties and durability of the sample. However, adding high-volume DWTS to concrete causes microstructural deterioration, but it is feasible to use high-volume DWTS to produce artificial aggregates, lightweight concrete, and sintered bricks. Meanwhile, calcined DWTS has similar compositions to clay, which makes it a potential raw material for cement clinker production. Cement-based materials can effectively solidify heavy metal ions in DWTS, and alkali-activated binders, magnesium-based cement, and carbon curing technology can further reduce the risk of heavy metal leaching. This review provides support for the high-value utilization of DWTS in cement-based materials and the reduction of its potential environmental risks.

Capsicum annuum Oleoresin Nanoemulgel - Design Characterization and In vitro Investigation of Anticancer and Antimicrobial Activities.

BACKGROUND: The use of naturally occurring bioactive materials is getting great attention owing to their safety and environmental properties. Oily compounds, known as oleoresins, are expected to provide an important source for the natural products industry aiming to develop novel treatments for skin conditions. In this work, Capsicum annuum oleoresin nanoemulgel formulations have been prepared and investigated for their antibacterial and anticancer properties. METHODOLOGY: Several C. annuum oleoresin nanoemulgel formulations were prepared by incorporating a Carbopol 940 gel in a self-nanoemulsifying nanoemulsion consisting of C. annuum, tween 80, and span 80. The systems were characterized for particle size, polydispersity index (PDI), zeta potential, and rheology. The in vitro antimicrobial and cytotoxic activities of the optimum formulation were evaluated. RESULTS: The selected formulation is composed of 40% tween, 10% span 80, and 40% C. annuum oleoresin. This formulation produced a stable nanoemulsion with a narrow PDI value of 0.179 ± 0.08 and a droplet size of 104.0 ± 2.6 nm. Results of the in vitro antimicrobial studies indicated high potency of the systems against methicillin-resistant Staphylococcus aureus (MRSA) (zone of inhibition of 29 ± 1.9 mm), E. coli (33 ± 0.9 mm), K. pneumonia (30 ± 1.4 mm), and C. albicans (21 ± 1.5 mm), as compared to the reference antibiotic, ampicillin (18 ± 1.4 mm against K. pneumonia), and antifungal agent, fluconazole (12 ± 0.1 mm against C. albicans). Furthermore, cytotoxicity results, expressed as IC50 values, revealed that the oleoresin and its nanoemulgel had the best effects against the HepG2 cell line (IC50 value of 79.43 µg/mL for the nanoemulgel) and MCF7 (IC50 value of 57.54 µg/mL), and the most potent effect was found against 3T3 (IC50 value of 45.7 µg/m- L). On the other side, the system did not substantially exhibit activity against By-61 and Hela. CONCLUSION: C. annuum oleoresin and its nanoemulgel can be considered valuable sources for the discovery of new antibacterial, antifungal, and anticancer compounds in the pharmaceutical industry, especially due to their potent activity against various cancer cell lines as well as bacterial and fungal strains.

Systemic Cisplatin Does Not Affect the Bone Regeneration Process in a Critical Size Defect Murine Model.

Osteosarcoma (OS) is the most common primary malignant bone tumor, and the current standard of care for OS includes neoadjuvant chemotherapy, followed by an R0 surgical resection of the primary tumor, and then postsurgical adjuvant chemotherapy. Bone reconstruction following OS resection is particularly challenging due to the size of the bone voids and because patients are treated with adjuvant and neoadjuvant systemic chemotherapy, which theoretically could impact bone formation. We hypothesized that an osteogenic material could be used in order to induce bone regeneration when adjuvant or neoadjuvant chemotherapy is given. We utilized a biomimetic, biodegradable magnesium-doped hydroxyapatite/type I collagen composite material (MHA/Coll) to promote bone regeneration in the presence of systemic chemotherapy in a murine critical size defect model. We found that in the presence of neoadjuvant or adjuvant chemotherapy, MHA/Coll is able to enhance and increase bone formation in a murine critical size defect model (11.16 ± 2.55 or 13.80 ± 3.18 versus 8.70 ± 0.81 mm3) for pre-op cisplatin + MHA/Coll (p-value = 0.1639) and MHA/Coll + post-op cisplatin (p-value = 0.1538), respectively, at 12 weeks. These findings indicate that neoadjuvant and adjuvant chemotherapy will not affect the ability of a biomimetic scaffold to regenerate bone to repair bone voids in OS patients. This preliminary data demonstrates that bone regeneration can occur in the presence of chemotherapy, suggesting that there may not be a necessity to modify the current standard of care concerning neoadjuvant and adjuvant chemotherapy for the treatment of metastatic sites or micrometastases.

Control of the Iron State in Pharmaceuticals Used for Treatment and Prevention of Iron Deficiency Using Mössbauer Spectroscopy.

Various iron-containing medicaments, vitamins and dietary supplements are used or developed for treatment and prevention of the iron deficiency anemia which is very dangerous for human and may cause various disorders. From the other hand, blood losses, iron poor diet, microelements (co-factors) deficiency, metabolic failures, absorption problems, etc. can change the iron status and affect the health. These pharmaceuticals contain iron compounds in the ferrous and ferric states. It is known that ferrous salts are more suitable for the intestinal intake than ferric ones. On the other hand, pharmaceutically important ferritin analogues contain ferric hydrous oxides and appear to be effective for both injections and peroral administration. 57Fe Mössbauer spectroscopy is a unique physical technique which allows one to study various iron-containing materials including pharmaceuticals. Therefore, this technique was applied to study iron-containing pharmaceuticals for the analysis of the iron state, identification of ferric and ferrous compounds, revealing some structural peculiarities and for detection of aging processes in relation to the iron compounds. This review considers the main results of a long experience in the study of iron-containing pharmaceuticals by Mössbauer spectroscopy with critical analysis that may be useful for pharmacists, biochemists, biophysicists, and physicians.

Recyclable Multifunctional Nanocomposites Based on Carbon Nanotube Reinforced Vitrimers with Shape Memory and Joule Heating Capabilities.

The present study focuses on the multifunctional capabilities of carbon nanotube (CNT)-reinforced vitrimers. More specifically, the thermomechanical properties, the Joule effect heating capabilities, the electrical conductivity, the shape memory, and the chemical recycling capacity are explored as a function of the CNT content and the NH2/epoxy ratio. It is observed that the electrical conductivity increases with the CNT content due to a higher number of electrical pathways, while the effect of the NH2/epoxy ratio is not as prevalent. Moreover, the Tg of the material decreases when increasing the NH2/epoxy ratio due to the lower cross-link density, whereas the effect of the CNTs is more complex, in some cases promoting a steric hindrance. The results of Joule heating tests prove the suitability of the proposed materials for resistive heating, reaching average temperatures above 200 °C when applying 100 V for the most electrically conductive samples. Shape memory behavior shows an outstanding shape fixity ratio in every case (around 100%) and a higher shape recovery ratio (95% for the best-tested condition) when decreasing the NH2/epoxy ratio and increasing the CNT content, as both hinder the rearrangement of the dynamic bonds. Finally, the results of the recyclability tests show the ability to regain the nanoreinforcement for their further use. Therefore, from a multifunctional analysis, it can be stated that the proposed materials present promising properties for a wide range of applications, such as Anti-icing and De-icing Systems (ADIS), Joule heating devices for comfort or thermotherapy, or self-deployable structures, among others.

[Mechanisms of changes of active components in Chinese medicinal materials during drying: a review].

Drying is an indispensable processing step for Chinese medicinal materials after harvesting. It often leads to significant changes in the active components of these materials, thus impacting their medicinal values. Understanding the mechanisms behind the changes during the drying process is of great importance for regulating the transformation of key active components. Therefore, this paper reviews the available studies and comprehensively expounds the mechanisms underlying the changes in active components during the drying process. The aim is to offer insights for the development of regulatory strategies and the improvement of drying techniques for Chinese medicinal materials.