Co-exposure to Environmentally Relevant Levels of Molybdenum and Cadmium Induces Oxidative Stress and Ferroptosis in the Ovary of Ducks.

Excessive doses of molybdenum (Mo) and cadmium (Cd) have toxic effects on animals. Nevertheless, the reproductive toxicity elicited by Mo and Cd co-exposure remains obscure. To evaluate the co-induce toxic impacts of Mo and Cd on ovaries, 8-day-old 40 healthy ducks were stochastically distributed to four groups and were raised a basal diet supplemented with Cd (4 mg/kg Cd) and/or Mo (100 mg/kg Mo). In the 16th week, ovary tissues were gathered. The data revealed that Mo and/or Cd decreased GSH content, CAT, T-SOD, and GSH-Px activities and increased MDA and H2O2 levels. Moreover, there was a significant decrease in nuclear Nrf2 protein level and its related downstream factors, while cytoplasmic Nrf2 protein level showed a substantial increase. Additionally, a marked elevation was observed in ferrous ion content and TFRC, GCLC, SLC7A11, ACSL4, and PTGS2 expression levels, while FTH1, FTL1, FPN1, and GPX4 expression levels were conversely reduced. These indicators exhibited more marked changes in the joint exposure group. In brief, our results announced that Mo and/or Cd resulted in oxidative stress and ferroptosis in duck ovaries. Synchronously, the Cd and Mo mixture intensified the impacts.

Oxidative Decarbonylation of an Azacalixpyridine-Supported Mo(0)-Tricarbonyl to a Mo(VI)-Trioxo Complex with Dioxygen in Solution and on Au(111): Determination of Molecular Mechanism.

The conversion of an azacalixpyridine-supported Mo(0) tricarbonyl into a Mo(VI) trioxo complex with dioxygen (O2) is investigated in homogeneous solution and in a molecular film adsorbed on Au(111) using a variety of spectroscopic and analytical methods. These studies in particular show that the dome-shaped carbonyl complex adsorbed on the metal surface has the ability to bind and activate gaseous oxygen, overcoming the so-called surface trans-effect. Furthermore, the rate of the conversion dramatically increases by irradiation with light. This observation is explained with the help of complementary DFT calculations and attributed to two different pathways, a thermal and a photochemical one. Based on the experimental and theoretical findings, a molecular mechanism for the conversion of the carbonyl to the oxo complex is derived.

Highly selective whole-cell 25-hydroxyvitamin D3 synthesis using molybdenum-dependent C25-steroid dehydrogenase and cyclodextrin recycling.

BACKGROUND: The global prevalence of vitamin D (VitD) deficiency associated with numerous acute and chronic diseases has led to strategies to improve the VitD status through dietary intake of VitD-fortified foods and VitD supplementation. In this context, the circulating form of VitD3 (cholecalciferol) in the human body, 25-hydroxy-VitD3 (calcifediol, 25OHVitD3), has a much higher efficacy in improving the VitD status, which has motivated researchers to develop methods for its effective and sustainable synthesis. Conventional monooxygenase-/peroxygenase-based biocatalytic platforms for the conversion of VitD3 to value-added 25OHVitD3 are generally limited by a low selectivity and yield, costly reliance on cyclodextrins and electron donor systems, or by the use of toxic co-substrates. RESULTS: In this study, we used a whole-cell approach for biocatalytic 25OHVitD3 synthesis, in which a molybdenum-dependent steroid C25 dehydrogenase was produced in the denitrifying bacterium Thauera aromatica under semi-aerobic conditions, where the activity of the enzyme remained stable. This enzyme uses water as a highly selective VitD3 hydroxylating agent and is independent of an electron donor system. High density suspensions of resting cells producing steroid C25 dehydrogenase catalysed the conversion of VitD3 to 25OHVitD3 using either O2 via the endogenous respiratory chain or externally added ferricyanide as low cost electron acceptor. The maximum 25OHVitD3 titer achieved was 1.85 g L-1 within 50 h with a yield of 99%, which is 2.2 times higher than the highest reported value obtained with previous biocatalytic systems. In addition, we developed a simple method for the recycling of the costly VitD3 solubiliser cyclodextrin, which could be reused for 10 reaction cycles without a significant loss of quality or quantity. CONCLUSIONS: The established steroid C25 dehydrogenase-based whole-cell system for the value-adding conversion of VitD3 to 25OHVitD3 offers a number of advantages in comparison to conventional oxygenase-/peroxygenase-based systems including its high selectivity, independence from an electron donor system, and the higher product titer and yield. Together with the established cyclodextrin recycling procedure, the established system provides an attractive platform for large-scale 25OHVitD3 synthesis.

Drain-Induced Multifunctional Ambipolar Electronics Based on Junctionless MoS2.

Applying a drain bias to a strongly gate-coupled semiconductor influences the carrier density of the channel. However, practical applications of this drain-bias-induced effect in the advancement of switching electronics have remained elusive due to the limited capabilities of its current modulation known to date. Here, we show strategies to largely control the current by utilizing drain-bias-induced carrier type switching in an ambipolar molybdenum disulfide (MoS2) field-effect transistor with Pt bottom contacts. Our CMOS-compatible device architecture, incorporating a partially gate-coupled p-n junction, achieves multifunctionality. The ambipolar MoS2 device operates as an ambipolar transistor (on/off ratios exceeding 107 for both NMOS and PMOS), a rectifier (rectification ratio of ∼3 × 106), a reversible negative breakdown diode with an adjustable breakdown voltage (on/off ratio exceeding 109 with a maximum current as high as 10-4 A), and a photodetector. Finally, we demonstrate a complementary inverter (gain of ∼24 at Vdd = 1.5 V), which is highly facile to fabricate without the need for complex heterostructures and doping processes. Our study provides strategies to achieve high-performance ambipolar MoS2 devices and to effectively utilize drain bias for electrical switching.

Selenium-molybdenum interactions reduce chromium toxicity in Nicotiana tabacum L. by promoting chromium chelation on the cell wall.

Chromium (Cr) is a hazardous heavy metal that negatively affects animals and plants. The micronutrients selenium (Se) and molybdenum (Mo) have been widely shown to alleviate heavy metal toxicity in plants. However, the molecular mechanism of Cr chelation on the cell wall by combined treatment with Se and Mo has not been reported. Therefore, this study aimed to explore the effects of Se-Mo interactions on the subcellular distribution of Cr (50 µM) and on cell wall composition, structure, functional groups and Cr content, in addition to performing a comprehensive analysis of the transcriptome. Our results showed that the cell walls of shoots and roots accumulated 51.0% and 65.0% of the Cr, respectively. Furthermore, pectin in the cell wall bound 69.5%/90.2% of the Cr in the shoots/roots. Se-Mo interactions upregulated the expression levels of related genes encoding galacturonosyltransferase (GAUT), UTP-glucose-1-phosphate uridylyltransferase (UGP), and UDP-glucose-4-epimerase (GALE), involved in polysaccharide biosynthesis, thereby increasing pectin and cellulose levels. Moreover, combined treatment with Se and Mo increased the lignin content and cell wall thickness by upregulating the expression levels of genes encoding cinnamyl alcohol dehydrogenase (CAD), peroxidase (POX) and phenylalanine amino-lyase (PAL), involved in lignin biosynthesis. Fourier-transform infrared (FTIR) spectroscopy results showed that Se + Mo treatment (in combination) increased the number of carboxylic acid groups (-COOH) groups, thereby enhancing the Cr chelation ability. The results not only elucidate the molecular mechanism of action of Se-Mo interactions in mitigating Cr toxicity but also provide new insights for phytoremediation and food safety.

A "signal off-on" fluorescence bioassay based on 2D-MoS2-tetrahedral DNA bioconjugate for rapid virus detection.

In this work we present the preparation of a 2D molybdenum disulphide nanosheets (2D-MoS2) and tetrahedral DNA nanostructures (TDNs) bioconjugate, and its application to the development of a bioassay for rapid and easy virus detection. The bioconjugate has been prepared by using TDNs carrying the capture probe labelled with 6-carboxyfluoresceine (6-FAM). As case of study to assess the utility of the assay developed, we have chosen the SARS-CoV-2 virus. Hence, as probe we have used a DNA sequence complementary to a region of the SARS-CoV-2 ORF1ab gene (TDN-ORF-FAM). This 6-FAM labelled capture probe is located on the top vertex of the tetrahedral DNA nanostructure, the three left vertices of TDNs have a thiol group. These TDNs are bounded to 2D-MoS2 surface through the three thiol groups, allowing the capture probe to be oriented to favour the biorecognition reaction with the analyte. This biorecognition resulting platform has finally been challenged to the detection of the SARS-CoV-2 ORF1ab gene sequence as the target model by measuring fluorescence before and after the hybridization event with a detection limit of 19.7fM. Furthermore, due to high sensitivity of the proposed methodology, it has been applied to directly detect the virus in nasopharyngeal samples of infected patients without the need of any amplification step. The developed bioassay has a wide range of applicability since it can be applied to the detection of any pathogen by changing the probe corresponding to the target sequence. Thus, a novel, hands-on strategy for rapid pathogen detection has proposed and has a high potential application value in the early diagnosis of infections causes by virus or bacteria.

The molybdenum cofactor biosynthesis gene, OsCNX1, is essential for seedling development and seed germination in rice.

Pre-harvest sprouting (PHS) frequently occurs in rice due to the long spells of rainy weather, and causes severe yield loss and grain quality decrease. Here, we identified one PHS-related gene OsCNX1 cloned from rice PHS mutant, which encoded a molybdenum cofactor (MoCo) biosynthesis enzyme. Genetic complementation indicated OsCNX1 could rescue the PHS and seedling lethal phenotype of the mutant. Expression pattern showed that OsCNX1 was expressed in rice tissue including seedling shoot, culm, blade, and sheath of flag leaf, young panicle, and the seeds at different development stages. Overexpression of OsCNX1 significantly decreased the plant height, and the seed germination of the dormant seeds harvested from fresh panicles, comparing to the wild type (WT). In addition, 1492 differentially expressed genes (DEGs) were identified between OsCNX1-overexpressed line and WT by RNA-sequencing, which were mainly classified in plant-pathogen interaction, plant hormone signal transduction, and starch/sucrose metabolism. These results showed that OsCNX1 was not only necessary for rice seed germination, but also participated in plant development, indicating that OsCNX1 may be useful in rice breeding of PHS resistance and plant height. Supplementary information: The online version contains supplementary material available at 10.1007/s11032-023-01424-x.

Value of Molybdenum Target X-Ray and High-Frequency Color Doppler Flow Imaging in Early Diagnosis of Breast Carcinoma: A Comparative Analysis.

Background: Breast carcinoma (BC) threatens the physical and mental health of women worldwide, and early diagnosis is important for improving patient outcomes and ensuring successful treatment. Purpose: This research mainly aims to compare and analyze the value of molybdenum target X-ray and high-frequency color Doppler flow imaging (CDFI) in the early diagnosis of BC. Methods: First, 102 patients with suspected early-stage BC (ESBC) admitted to Henan Provincial People's Hospital were examined by molybdenum target X-ray and CDFI. Based on the pathological findings, the diagnostic efficiency data of the two diagnostic modalities such as positive detection rate (PDR), positive predictive value (PPV), negative predictive value (NPV), sensitivity (SEN), specificity (SPE), and accuracy (ACC), as well as imaging information like masses, microcalcifications (MCs), axillary lymph node (LN) metastases, and blood flow signal or vascular sign abnormalities were analyzed. Results: CDFI contributed to higher PDR, PRV, NPV, SEN, and ACC than molybdenum target X-ray in ESBC diagnosis, but similar SPE. The combined diagnosis of molybdenum target X-ray plus CDFI contributed to even higher PDR, PRV, NPV, SEN, and ACC than molybdenum target X-ray alone and higher ACC than CDFI. Imaging inspection revealed that the number of cases of masses, axillary LN metastases, and abnormalities in blood flow signals or vascular signs detected by CDFI was significantly higher than that by molybdenum target X-ray, while the number of MCs was significantly lower. Conclusion: Molybdenum target X-ray plus CDFI is more effective in the diagnosis of ESBC and plays a complementary role in imaging examination, which can synergistically improve the diagnostic ACC of ESBC and is worthy of clinical promotion.

Self-Assembled Monolayer Doping for MoTe2 Field-Effect Transistors: Overcoming PN Doping Challenges in Transition Metal Dichalcogenides.

Transition metal dichalcogenides (TMDs) have gained significant attention as next-generation semiconductor materials that could potentially overcome the integration limits of silicon-based electronic devices. However, a challenge in utilizing TMDs as semiconductors is the lack of an established PN doping method to effectively control their electrical properties, unlike those of silicon-based semiconductors. Conventional PN doping methods, such as ion implantation, can induce lattice damage in TMDs. Thus, chemical doping methods that can control the Schottky barrier while minimizing lattice damage are desirable. Here, we focus on the molybdenum ditelluride (2H-MoTe2), which has a hexagonal phase and exhibits ambipolar field-effect transistor (FET) properties due to its direct band gap of 1.1 eV, enabling concurrent transport of electrons and holes. We demonstrate the fabrication of p- or n-type unipolar FETs in ambipolar MoTe2 FETs using self-assembled monolayers (SAMs) as chemical dopants. Specifically, we employ 1H,1H,2H,2H perfluorooctyltriethoxysilane and (3-aminopropyl)triethoxysilane as SAMs for chemical doping. The selective SAMs effectively increase the hole and electron charge transport capabilities in MoTe2 FETs by 18.4- and 4.6-fold, respectively, due to the dipole effect of the SAMs. Furthermore, the Raman shift of MoTe2 by SAM coating confirms the successful p- and n-type doping. Finally, we demonstrate the fabrication of complementary inverters using SAMs-doped MoTe2 FETs, which exhibit clear full-swing capability compared to undoped complementary inverters.

Revealing the Mechanistic Basis of Regulation of Phosphorus Uptake in Soybean (Glycine max) Roots by Molybdenum: An Integrated Omics Approach.

While molybdenum (Mo) application can improve phosphorus (P) availability to plants by changing P speciation in the rhizosphere, the mechanistic basis of this process remains unclear. This work investigated the impact of various combinations of Mo and P treatments on root morphology, P and Mo uptake, and root transcriptome and metabolome. Mo application significantly increased soybean biomass and the number of lateral roots at both low (5 µmol) or normal (500 µmol) P levels and significantly improved P concentration and accumulation in Normal P treatment. Compared with the Normal P treatment, Low P significantly increased the number of roots, root surface area, and root acid phosphatase secretion. A total of 6811 Mo-responsive differentially expressed genes and 135 differential metabolites were identified at two P levels. At Low P, transcriptional changes significantly increased root synthesis and secretion of succinic acid, methylmalonic acid, and other organic acids as well as acid phosphatase, thereby increasing the conversion of soil aluminum-bound P and organic P into available P. At Normal P, Mo application increased P uptake mainly by increasing the number of lateral roots. Thus, Mo helps crops adapt to different P levels by regulating root anatomy and transcriptional and metabolic profiles of their roots.

The Interplay of Sulfur and Selenium Enabling Variations in Micronutrient Accumulation in Red Spinach.

Aside from its importance in human and animal health, low levels of foliar-applied selenate (SeO4) can be advantageous in the presence of sulfur (S), contributing to improved growth, nutrient uptake, and crop quality. A hydroponic experiment in a growth chamber explored the interactive influence of Se and S on micronutrients and several quality indices, such as soluble sugars, organic acids, and total protein concentrations in spinach (Spinacia oleracea L.). Three levels of S (deprivation, adequate, and excessive) with varying quantities of Se (deficient, moderate, and higher) were examined in combination. Under S starvation and along with S nourishment in plant parts, Se treatments were found to cause noticeable variations in plant biomass and the concentrations of the examined elements and other quality parameters. Both Se levels promoted S accumulation in S-treated plants. Although the Se treatment had the opposite effect in shoots, it had a favorable impact on minerals (apart from Mn) in roots grown under S-limiting conditions. The S and Se relationship highlighted beneficial and/or synergistic effects for Mn and Fe in edible spinach portions. Reducing sugars were synergistically boosted by adequate S and moderate Se levels in roots, while in shoots, they were accumulated under moderate-or-higher Se and excessive S. Furthermore, the concentration of the quantified organic acids under S-deficient conditions was aided by various Se levels. In roots, moderate Se under high S application enhanced both malic acid and citric acid, while in the edible parts, higher Se under both adequate and elevated S levels were found to be advantageous in malic acid accumulation. Moreover, by elevating S levels in plant tissues, total protein concentration increased, whereas both moderate and high Se levels (Se1 and Se2) did not alter total protein accumulation in high S-applied roots and shoots. Our findings show that the high S and medium Se dose together benefit nutrient uptake; additionally, their combinations support soluble sugars and organic acids accumulation, contributing ultimately to the nutritional quality of spinach plants. Moreover, consuming 100 g of fresh red spinach shoot enriched with different Se and S levels can contribute to humans' daily micronutrients intake.

Does the Micronutrient Molybdenum Have a Role in Gestational Complications and Placental Health?

Molybdenum is an essential trace element for human health and survival, with molybdenum-containing enzymes catalysing multiple reactions in the metabolism of purines, aldehydes, and sulfur-containing amino acids. Recommended daily intakes vary globally, with molybdenum primarily sourced through the diet, and supplementation is not common. Although the benefits of molybdenum as an anti-diabetic and antioxidant inducer have been reported in the literature, there are conflicting data on the benefits of molybdenum for chronic diseases. Overexposure and deficiency can result in adverse health outcomes and mortality, although physiological doses remain largely unexplored in relation to human health. The lack of knowledge surrounding molybdenum intake and the role it plays in physiology is compounded during pregnancy. As pregnancy progresses, micronutrient demand increases, and diet is an established factor in programming gestational outcomes and maternal health. This review summarises the current literature concerning varied recommendations on molybdenum intake, the role of molybdenum and molybdoenzymes in physiology, and the contribution these play in gestational outcomes.

OECD 414 supplementary prenatal developmental toxicity study of sodium molybdate dihydrate in the rat and benchmark dose evaluation.

In a continuing investigation of the potential for reproductive and developmental toxicity of molybdenum (Mo), consequent to the previous published OECD studies [1,2] and as directed by the European Chemicals Agency [3], a supplemental rat GLP-compliant Prenatal Developmental Toxicity (PNDT) study was conducted to investigate higher dose levels of sodium molybdate dihydrate (SMD) in an identical study design (OECD 414)[4] to Murray et al. 2014a [1], at dietary concentrations calculated to provide target Mo levels of 80 and 120 mg/kg bw/day (the maximum-tolerated dose). There was no effect on post-implantation loss, litter size, sex ratio or the incidence of external, visceral or skeletal fetal malformations or variations. Fetal weight was reduced proportionate to maternal dose. Minimal differences observed in the ossification status of some extremities of fetuses from females receiving 120 mg Mo/kg bw/day were confirmed as transient by skeletal examination of PND 21 pups from a further group of females receiving the same dose regime. There was no evidence of copper depletion in serum, placenta or liver. A benchmark dose evaluation using continuous and dichotomous approaches by combining the fetal body weight data from this study and the previous study determined that the BMD05 ranged from 47 to 57 mg Mo/kg bw/day, depending on the modelling approach and the BMDL05 estimates ranged from 37 to 47 mg Mo/kg bw/day. These levels are considered a more statistically robust point of departure for risk assessment for reproductive effects than the established NOAEL of 40 mg Mo/kg bw/day.

Update on copper and selenium in Canadian cow-calf herds: regional differences and estimation of serum reference values.

Trace mineral supplementation of beef cattle is essential for efficient reproduction and herd health. Understanding regional differences in cow trace mineral status could inform decisions about risks of deficiencies and supplementation management. Cow-calf surveillance projects provided three opportunities to evaluate the trace mineral status of Canadian beef cow herds. Blood samples were collected at pregnancy testing in 2014 from 102 cow-calf herds and in 2016 from 86 cow-calf herds in Western Canada. In 2019, blood samples were collected at pregnancy testing from cows in 163 cow-calf herds from Eastern and Western Canada. Serum samples were analyzed for copper, selenium, and molybdenum concentrations using a plasma mass spectrometer. The prevalence of copper deficient cows sampled from the Western provinces ranged from 24% to 43% across the three periods, and was 20% from Eastern Canada in 2019. The prevalence of selenium deficient cows ranged from 0.2% to 0.4% across the three projects in Western Canada, but was higher in Eastern Canada at 4.6% in 2019. High serum molybdenum was identified in 9.4% to 14% of cows across the three periods in Western Canada and in 15% of cows sampled in Eastern Canada in 2019. Serum copper, selenium, and molybdenum concentrations varied by cow age and month of sample collection. Serum selenium and molybdenum concentrations, but not copper, varied by soil type associated with the location of the farm. A subsample of samples from cows from Western Canadian herds provided body condition score (BCS) data, pregnancy status, and calf survival data and were used to estimate updated serum reference values for adequate concentrations. Age-specific values were required for selenium and molybdenum. Reference intervals (80%) were estimated from 2,406 pregnant beef cows from 99 herds with each cow having a BCS ≥ 2.5/5 and a live calf at 3 wk with no retained placenta: copper for all cows (0.379 to 0.717 ppm), selenium for cows <4 yr (0.052 to 0.152 ppm), and selenium for cows ≥4 yr (0.064 to 0.184 ppm). Upper 90% reference limits were also estimated for serum molybdenum for cows <4 yr (>0.104 ppm) and cows ≥4 yr (>0.110 ppm). The lower limits for the reference intervals for adequate copper and selenium are below those previously reported; nevertheless, they represent a large sample that was specifically applicable to extensively managed beef animals in western Canada.

Combining Structural Modification and Electrolyte Regulation to Enable Long-Term Cyclic Stability of MoO3-x @TiO2 as Cathode for Aqueous Zn-Ion Batteries.

Orthorhombic MoO3 (α-MoO3 ) with multivalent redox couple of Mo6+ /Mo4+ and layered structure is a promising cathode for rechargeable aqueous Zn-ion batteries (AZIBs). However, pure α-MoO3 suffers rapid capacity decay due to the serious dissolution and structural collapse. Meanwhile, the growth of byproduct and dendrite on the anode also lead to the deterioration of cyclic stability. This article establishes the mechanism of proton intercalation into MoO3 and proposes a joint strategy combining structural modification with electrolyte regulation to enhance the cyclic stability of MoO3 without sacrificing the capacity. In ZnSO4 electrolyte with Al2 (SO4 )3 additive, TiO2 coated oxygen-deficient α-MoO3 (MoO3-x @TiO2 ) delivers a reversible capacity of 93.2 mA h g-1 at 30 A g-1 after 5000 cycles. The TiO2 coating together with the oxygen deficiency avoids structural damage while facilitating proton diffusion. Besides, the additive of Al2 (SO4 )3 , acting as a pump, continuously supplements protons through dynamic hydrolysis, avoiding the formation of Zn4 SO4 (OH)6 ·xH2 O byproducts at both MoO3-x @TiO2 and Zn anode. In addition, Al2 (SO4 )3 additive facilitates uniform deposition of Zn owing to the tip-blocking effect of Al3+ ion. The study demonstrates that the joint strategy is beneficial for both cathode and anode, which may shed some light on the development of AZIBs.

A NIR-II Photoactivatable "ROS Bomb" with High-Density Cu2 O-Supported MoS2 Nanoflowers for Anticancer Therapy.

The fast conversion of hydrogen peroxide (H2 O2 ) into reactive oxygen species (ROS) at tumor sites is a promising anticancer strategy by manipulating nanomedicines with near-infrared light in the second region (NIR-II). However, this strategy is greatly compromised by the powerful antioxidant capacity of tumors and the limited ROS generation rate of nanomedicines. This dilemma mainly stems from the lack of an effective synthesis method to support high-density copper-based nanocatalysts on the surface of photothermal nanomaterials. Herein, a multifunctional nanoplatform (MCPQZ) with high-density cuprous (Cu2 O) supported molybdenum disulfide (MoS2 ) nanoflowers (MC NFs) is developed for the efficient killing of tumors via a potent ROS storm by an innovative method. Under NIR-II light irradiation, the ROS intensity and maximum reaction velocity (Vmax ) produced by MC NFs are 21.6 and 33.8 times that of the non-irradiation group in vitro, which is much higher than most current nanomedicines. Moreover, the strong ROS storm in cancer cells is efficiently formed by MCPQZ (increased by 27.8 times compared to the control), thanks to the fact that MCPQZ effectively pre-weakens the multiple antioxidant systems of cancer cells. This work provides a novel insight to solve the bottleneck of ROS-based cancer therapy.

A graphitic nano-onion/molybdenum disulfide nanosheet composite as a platform for HPV-associated cancer-detecting DNA biosensors.

An electrochemical DNA sensor that can detect human papillomavirus (HPV)-16 and HPV-18 for the early diagnosis of cervical cancer was developed by using a graphitic nano-onion/molybdenum disulfide (MoS2) nanosheet composite. The electrode surface for probing DNA chemisorption was prepared via chemical conjugation between acyl bonds on the surfaces of functionalized nanoonions and the amine groups on functionalized MoS2 nanosheets. The cyclic voltammetry profile of an 1:1 nanoonion/MoS2 nanosheet composite electrode had an improved rectangular shape compared to that of an MoS2 nanosheet elecrode, thereby indicating the amorphous nature of the nano-onions with sp2 distancing curved carbon layers that provide enhanced electronic conductivity, compared to MoS2 nanosheet only. The nanoonion/MoS2 sensor for the DNA detection of HPV-16 and HPV-18, respectively, was measured at high sensitivity through differential pulse voltammetry (DPV) in the presence of methylene blue (MB) as a redox indicator. The DPV current peak was lowered after probe DNA chemisorption and target DNA hybridization because the hybridized DNA induced less effective MB electrostatic intercalation due to it being double-stranded, resulting in a lower oxidation peak. The nanoonion/MoS2 nanosheet composite electrodes attained higher current peaks than the MoS2 nanosheet electrode, thereby indicating a greater change in the differential peak probably because the nanoonions enhanced conductive electron transfer. Notably, both of the target DNAs produced from HPV-18 and HPV-16 Siha and Hela cancer cell lines were effectively detected with high specificity. The conductivity of MoS2 improved by complexation with nano-onions provides a suitable platform for electrochemical biosensors for the early diagnosis of many ailments in humans.

Hybrid nanoarchitectonics of molybdenum dioxide (MoO2) and doxorubicin (DOX) for synergistic chemo-photothermal-based breast carcinoma therapy.

Cancer has emerged as one of the severe ailments due to the uncontrolled proliferation rate of cells, accounting for millions of deaths annually. Despite the availability of various treatment strategies, including surgical interventions, radiation, and chemotherapy, tremendous advancements in the past two decades of research have evidenced the generation of different nanotherapeutic designs toward providing synergistic therapy. In this study, we demonstrate the assembly of a versatile nanoplatform based on the hyaluronic acid (HA)-coated molybdenum dioxide (MoO2) assemblies to act against breast carcinoma. The hydrothermal approach-assisted MoO2 constructs are immobilized with doxorubicin (DOX) molecules on the surface. Further, these MoO2-DOX hybrids are encapsulated with the HA polymeric framework. Furthermore, the versatile nanocomposites of HA-coated MoO2-DOX hybrids are systematically characterized using various characterization techniques, and explored biocompatibility in the mouse fibroblasts (L929 cell line), as well as synergistic photothermal (808-nm laser irradiation for 10 min, 1 W/cm2) and chemotherapeutic properties against breast carcinoma (4T1 cells). Finally, the mechanistic views concerning the apoptosis rate are explored using the JC-1 assay to measure the intracellular mitochondrial membrane potential (MMP) levels. In conclusion, these findings indicated excellent photothermal and chemotherapeutic efficacies, exploring the enormous potential of MoO2 composites against breast cancer.

A State-of-the-Science Review on Metal Biomarkers.

PURPOSE OF REVIEW: Biomarkers are commonly used in epidemiological studies to assess metals and metalloid exposure and estimate internal dose, as they integrate multiple sources and routes of exposure. Researchers are increasingly using multi-metal panels and innovative statistical methods to understand how exposure to real-world metal mixtures affects human health. Metals have both common and unique sources and routes of exposure, as well as biotransformation and elimination pathways. The development of multi-element analytical technology allows researchers to examine a broad spectrum of metals in their studies; however, their interpretation is complex as they can reflect different windows of exposure and several biomarkers have critical limitations. This review elaborates on more than 500 scientific publications to discuss major sources of exposure, biotransformation and elimination, and biomarkers of exposure and internal dose for 12 metals/metalloids, including 8 non-essential elements (arsenic, barium, cadmium, lead, mercury, nickel, tin, uranium) and 4 essential elements (manganese, molybdenum, selenium, and zinc) commonly used in multi-element analyses. RECENT FINDINGS: We conclude that not all metal biomarkers are adequate measures of exposure and that understanding the metabolic biotransformation and elimination of metals is key to metal biomarker interpretation. For example, whole blood is a good biomarker of exposure to arsenic, cadmium, lead, mercury, and tin, but it is not a good indicator for barium, nickel, and uranium. For some essential metals, the interpretation of whole blood biomarkers is unclear. Urine is the most commonly used biomarker of exposure across metals but it should not be used to assess lead exposure. Essential metals such as zinc and manganese are tightly regulated by homeostatic processes; thus, elevated levels in urine may reflect body loss and metabolic processes rather than excess exposure. Total urinary arsenic may reflect exposure to both organic and inorganic arsenic, thus, arsenic speciation and adjustment for arsebonetaine are needed in populations with dietary seafood consumption. Hair and nails primarily reflect exposure to organic mercury, except in populations exposed to high levels of inorganic mercury such as in occupational and environmental settings. When selecting biomarkers, it is also critical to consider the exposure window of interest. Most populations are chronically exposed to metals in the low-to-moderate range, yet many biomarkers reflect recent exposures. Toenails are emerging biomarkers in this regard. They are reliable biomarkers of long-term exposure for arsenic, mercury, manganese, and selenium. However, more research is needed to understand the role of nails as a biomarker of exposure to other metals. Similarly, teeth are increasingly used to assess lifelong exposures to several essential and non-essential metals such as lead, including during the prenatal window. As metals epidemiology moves towards embracing a multi-metal/mixtures approach and expanding metal panels to include less commonly studied metals, it is important for researchers to have a strong knowledge base about the metal biomarkers included in their research. This review aims to aid metals researchers in their analysis planning, facilitate sound analytical decision-making, as well as appropriate understanding and interpretation of results.

Adsorption Removal of Mo(VI) from an Aqueous Solution by Alumina with the Subsequent Regeneration of the Adsorbent.

Industrial wastewater is the main source of an excessive amount of molybdenum (Mo) in natural ecosystems. It is necessary to remove Mo from wastewater before it is discharged into the environment. Molybdate ion(VI) is the most common form of Mo in natural reservoirs and industrial wastewater. In this work, the sorption removal of Mo(VI) from an aqueous medium was evaluated using aluminum oxide. The influence of such factors as the pH of the solution and the temperature was evaluated. Three adsorption isotherms, namely, Langmuir, Freundlich and Temkin, were used to describe the experimental results. It was found that the pseudo-first order kinetic model better fits the kinetic data of the adsorption process, and the maximum Mo(VI) adsorption capacity was 31 mg/g at 25 °C and pH 4. The thermodynamic parameters indicated that the process of Mo(VI) adsorption on Al2O3 was exothermic and spontaneous. It was shown that the adsorption of Mo strongly depends on pH. The most effective adsorption was observed at pH values below 7. Experiments on adsorbent regeneration showed that Mo(VI) can be effectively desorbed from the aluminum oxide surface into a phosphate solution in a wide range of pH values. After the desorption of Mo(VI) in a phosphate solution, alumina was found to be suitable for repeating the procedure at least five times.