Advancements of sequencing batch biofilm reactor for slaughterhouse wastewater assisted with response surface methodology.

Slaughterhouse wastewater (SWW) contains a significant volume of highly polluted organic wastes. These include blood, fat, soluble proteins, colloidal particles, suspended materials, meat particles, and intestinal undigested food that consists of higher concentrations of organics such as biochemical oxygen demand (BOD), chemical oxygen demand (COD), nitrogen and phosphorus hence an efficient treatment is required before discharging into the water bodies. The effluent concentrations and performance of simultaneous sequential batch biofilm reactor (SBBR) with recycled plastic carrier media support are better than the local single-stage sequential batch reactor (SBR), which is lacking in the literature in terms of COD, NH3, NO3, and PO4 treatment efficiency. The present study reports a novel strategy to remove the above mentioned contaminants using an intermittently aerated SBBR with recycled plastic carrier media support along with simultaneous nitrification and denitrification. The central composite design was evaluated to optimize the treatment performance of seven different process variables including; different alternating conditions (Oxic/anoxic) for aeration cycles (3/2 h in a 6 h cycle, 6/5 h in a 12 h cycle and 9/8 h in an 18 h cycle) and hydraulic retention time (6, 12 and 18 h). The average removal efficiencies are 94.5% for NH3, 93% for NO3 and 90.1% for PO4, and 99% for COD. The study reveals that the denitrification in the post-anoxic phase was more efficient than the pre-anoxic phase for pollutant removal and maintaining higher quality effluent. The effluent concentrations and performance of simultaneous SBBR with recycled polyethylene carrier support media were better than local SBR system in terms of COD, NH3, NO3 and PO4 treatment efficiency. Results stipulated the suitability of SBBR for wastewater treatment and reusability as a sustainable approach for wastewater management under optimum conditions.

Process optimization of struvite recovered from slaughterhouse wastewater and its fertilizing efficacy in amendment of biofertilizer.

The intensive discharge of slaughterhouse waste into water bodies increases Nitrogen (N), Phosphorus (P) in the wastewater and leads to various environmental problems. On the other hand, the increasing treatment effort after the extraction of these valuable nutrients in the commercial fertilizer reduces the dependence on scarce phosphate resources. The viable solution is to recover N, P as struvite (magnesium ammonium phosphate) from nutrient rich waste water as a small scale treatment unit application. The main parameters that have a significant impact on the process, including pH, Mg: P ratio, and precipitation time, were investigated from slaughterhouse wastewater using a central composite design and the experimental data's were statistically analysed. The results indicated that pH and Mg/P ratio level had a significant impact and thus 85% struvite precipitation efficiency was achieved at 9.6 pH and 1.5 dose mol ratio (mol Mg per mol P), in an inexpensive, stirred tank batch reactor with a retention time of 70 min. The fertilization efficiency was tested on the growth of Solanum melongena L with the obtained struvite and the integration of struvite with the Azospirullum rhizobium and Bacillus megaterium. Treatment of struvite, struvite with Azospirillum rhizobium and Bacillus megaterium increased growth parameters by 10%, 20%, and 25%, respectively, over control. The assessment of growth factors showed the most amazing number of fruits, shoots, and root length in a standard ratio of 60:40 of struvite to bio-inoculants compared to sole struvite fertilizer. Findings of this study would be beneficial to determine the feasibility of slaughterhouse waste as a phosphorus source for struvite recovery.

A comprehensive techno-economic analysis of income-generating sources on the conversion of real sheep slaughterhouse waste stream into valorized by-products.

The present analysis was conducted as the first research to assess the techno-economic viability of the value-added by-products (struvite, blood meal, bone meal, and raw sheepskin) from a medium-scale sheep slaughterhouse facility with a slaughtering capacity of 300 sheep per day. For this aim, a comparative technical and economic feasibility analysis was performed to assess the synergistic use of slaughterhouse-oriented rendering wastes and struvite recovery from real sheep abattoir effluent within the framework of detailed cost breakdown, break-even point, and payback period analyses. The experimental findings clearly showed that under the optimal conditions (chemical combination of MgCl2.6H2O + NaH2PO4.2H2O, a molar ratio of Mg2+:NH4+-N:PO43--P = 1.2:1:1, a reaction pH of 9.0, an initial ammonium concentration of 240 mg NH4+-N/L, and a reaction time of 15 min), struvite precipitation could effectively remove about 73%, 64%, 59%, and 82% of NH4+-N, TCOD, SCOD, and color, respectively, from the real sheep slaughterhouse waste stream. Based on various up-to-date techno-economic items considered within the break-even point analysis, the sheep slaughterhouse facility was estimated to achieve the targeted net income (€100/day) for any selling prices of €1041.30/ton, €640.05/ton, €263.72/ton, and €1.012/hide, respectively, for struvite, blood meal, bone meal, and raw sheepskin. Steel construction and chemicals were determined as the most costly components for CAPEX (capital expenditures) and OPEX (operating expenditures), respectively, and selling prices of bone meal and raw sheepskin were found to be the most critical income items on the profitability of the slaughterhouse facility. Co-monetary assessment of the struvite process and valorized compounds corroborated the economic viability of the proposed project with the payback periods of about 6.3 and 5.5 years, respectively, for the current market and the profit-oriented conditions without subsidy. The findings of this feasibility analysis, as the first of its own, could be used as guideline for simplifying the decision-making with regards to the feasibility of similar facilities and commercialization of profitable by-products.

Biological wastewater treatment (anaerobic-aerobic) technologies for safe discharge of treated slaughterhouse and meat processing wastewater.

Slaughterhouse industry generates considerable amount of wastewater rich in proteins, lipids, fibres, and carbohydrates. Numerous technologies such as electrocoagulation, membrane separation, advanced oxidation, physico-chemical processes, and biological treatment have been implemented for reducing the concentrations of these compounds. Nevertheless, this review aims to provide extensive information solely on the biological treatment (anaerobic and aerobic) of slaughterhouse wastewater. The advantages of anaerobic treatment are excellent organic matter removal, less sludge production, low energy requirement, execution of higher loading rates, and considerable production of biogas. Aerobic treatment on the other hand is a less sensitive process, possess lower start-up period, and efficient nutrient removal process. Numerous case studies are described to bestow maximum understanding of the wastewater characteristics, kind of treatment employed, and complications involved in managing and treating of slaughterhouse effluent. Additionally, role of microbial community involved in the treatment of slaughterhouse waste is also discussed. Sequential anaerobic and aerobic reactors are also reviewed in order to present their advantages over single bioreactors. Intermittent sequencing batch reactor is a promising technology than other high rate digesters in the removal of carbon, nitrogen, and phosphorous.

Enhanced alure-type biological system (E-ATBS) for carbon, nitrogen and phosphorus removal from slaughterhouse wastewater: A case study.

Slaughterhouse wastewater is one of the most harmful agriculture and food industrial wastewaters. The emissions of not fully treated slaughtering wastewater would cause eutrophication of surface water and pollution of groundwater. This study investigated the nutrient removal performance for the enhanced alure-type biological system (E-ATBS) in the full-scale application. During the whole study period, COD, TN and TP removal efficiencies were higher than 97.1%, 90.8% and 90.1%, respectively. The effluent concentrations were lower than the newest effluent standard in China to avoid the discharged water pollution. Partial denitrification (PD)-ANAMMOX was considered as the main approach for anaerobic NH4+-N removal, which helped to guarantee the efficient N removal in the full-scale E-ATBS. Denitrifying P removal and aerobic P uptake ensured the efficient and stable P removal. E-ATBS is a promising technology especially for wastewater treatment in food processing facilities and should be widely popularized.

Performance of mixed algae for treatment of slaughterhouse wastewater and microbial community analysis.

This study investigated organic matter (OM) and nutrient removal efficiency of mixed algal species from slaughterhouse wastewater (SWW) by using photo-bioreactor. For this purpose, different dilution multiples of 10, 4, and 2 were applied to the SWW, and pure wastewater was finally used for algal cultivation. OM and nutrient removal performance in an algal photo-bioreactor were severely affected by the dilution ratio. After 7 days of cultivation, the highest removal percentages of total organic carbon (TOC), total nitrogen (TN), and total phosphorus (TP) were 89.6, 70.2, and 96.2 %, respectively. Furthermore, the changes in eukaryotic algae and cyanobacterial species in the algal photo-bioreactors were investigated using polymerase chain reaction (PCR) and denaturing gradient gel electrophoresis (DGGE) techniques. The results indicated that cyanobacterial species were more efficient than eukaryotic species in removing nutrients from the SWW. This study suggests that mixed algal photo-bioreactors could be used efficiently in the treatment of SWW.