High enrichment and sensitive measurement of oxytetracycline in tea drinks by thermosensitive magnetic molecular imprinting based magnetic solid phase extraction coupled with boron doped carbon dots.

As a typical kind of new pollutants, there are still some challenges in the rapid detection of antibiotics. In this work, a sensitive fluorescent probe based on boron-doped carbon dots (B-CDs) in combination with thermo-responsive magnetic molecularly imprinted polymers (T-MMIPs) was constructed for the detection of oxytetracycline (OTC) in tea drinks. T-MMIPs were designed, fabricated and employed to enrich OTC at trace level from tea drinks, and B-CDs were utilized as the fluorescent probe to detect the concentration of OTC. The proposed method exhibited good linear relationship with OTC concentration from 0.2 to 60 µg L-1 and the limit of detection was 0.1 µg L-1. The established method has been successfully validated with tea beverages. Present work was the first attempt application of T-MMIPs in combination with CDs in detection of OTC, and demonstrated that the proposed method endowed the detection of OTC with high selectivity, sensitivity, reliability and wide application prospect, meanwhile offered a new strategy for the method establishment of rapid and sensitive detection of trace antibiotics in food and other matrices.

[Progress in stimuli-responsive molecularly imprinted polymers for enrichment analysis of trace components in traditional Chinese medicine].

Molecularly imprinted polymers demonstrate outstanding performance in the research on trace ingredients because of their high selectivity. Stimuli-responsive molecularly imprinted polymers(STR-MIPs) with the introduction of different responsive groups on the basis of traditionally imprinted materials can undergo reversible transformations when exposed to external stimuli such as temperature, magnetism, pH or light. Such responsiveness, combined with the specific recognition, endows STR-MIPs with excellent perfor-mance in trace component studies. Traditional Chinese medicine(TCM) contains complex components with trace content, and thus STR-MIPs have broad application prospects in the enrichment analysis of trace components in TCM. This paper elaborates on the application of STR-MIPs in the enrichment analysis of trace components in TCM from the perspectives of different stimuli, summarized relevant research achievements in the recent five years to broaden the application fields of molecular imprinting, and proposed a few opi-nions about their future development.

Simultaneous and dynamic measurement of Schisandrol A changes in rat blood and brain and its comparative pharmacokinetic study in control and Parkinson's disease rats by dual-probe in vivo microdialysis.

Schisandrol A (SchA) is the main active ingredient of Schisandra chinensis (Turcz.) Baill., which is a famous traditional Chinese herbal medicine. SchA can penetrate the blood-brain barrier and has a significant neuroprotective effect. A group of multiplexed stable isotope mass tags (MSIMTs, m/z 332, 338, 346, 349, 351, 354, 360, 363, 374 and 377) were synthesized to perform multiplexed stable isotope labeling derivatization (MSILD) of SchA in rat microdialysates and standards. A new magnetic molecularly imprinted polymer was prepared using MSIMT-375-SchA as dummy template. All the 10-plexed derivatives of MSIMTs-SchA can be efficiently and selectively enriched and purified using this adsorbent by magnetic dispersive solid phase extraction (MDSPE) before ultra high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) analysis. It should be pointed out that the MSIMT-346-SchA standard derivative was used as internal standard in the process of MDSPE and UHPLC-MS/MS. On these bases, 9 different rat microdialysate samples can be determined by UHPLC-MS/MS in a single run. The utilization of MSIMTs significantly increased the sensitivity, accuracy, selectivity and analysis throughput. Under the optimized conditions, satisfactory linearity (R2> 0.987), limit of detection (LODs, 0.15-0.26 pg/mL) and lower limit of quantitative (LLOQ, 0.8-2.0 pg/mL) were obtained. Intra- and inter-day precisions were in the range of 2.2% -12.5%, and recoveries 94.2% -106.2%. The matrix effects were very low, and the average derivatization efficiency of 10-plex MSIMTs to SchA was as high as 97.8%. Using the developed dual-probe in vivo microdialysis sampling technique, the proposed analytical method has been applied for comparative pharmacokinetics of SchA in the brain and blood of control and Parkinson's disease (PD) rats.

Solid-phase adsorption methodologies of naturally occurring anthraquinones: A review.

INTRODUCTION: Solid-phase extraction applied to plant matrices is nowadays a well-validated technique allowing to concentrate and purify different secondary metabolites. Several classes of phytochemicals have been selectively extracted by this methodology. During the last decade attention has been focused on biologically active anthraquinones from numerous sources like edible, healthy, and medicinal plants. OBJECTIVES: The aim of this review is to provide a detailed literature survey of the solid-phase adsorption methodologies for the extraction of natural anthraquinones reported so far and to discuss and propose future directions in this field of research. MATERIALS AND METHODS: Substructure search was performed in the SciFinder Scholar, PubMed, Medline, and Scopus databases. RESULTS: The first report about application of solid-phase adsorption for the purification of anthraquinones appeared in the literature in 2002. From this date, and in particular during recent years, the most notable examples included the use of chitin- and chitosan-based polymers, of molecularly imprinted polymers, of coated magnetic nanoparticles, of miniaturized matrix solid-phase dispersion, of functionalized resins, of differently structured lamellar solids, and finally of vortex-synchronized matrix solid-phase dispersion. CONCLUSIONS: The herein detailed solid-phase adsorption methodologies are powerful tools to selectively extract natural anthraquinones and/or provide anthraquinone-enriched phytopreparations. Nevertheless, many other important methods have been applied to synthetic anthraquinones (e.g., azo dyes). These could be conveniently employed also for natural anthranoids. Studies in this field are discussed in this review article.

Progress in stimuli-responsive molecularly imprinted polymers for enrichment analysis of trace components in traditional Chinese medicine / 中国中药杂志

Molecularly imprinted polymers demonstrate outstanding performance in the research on trace ingredients because of their high selectivity. Stimuli-responsive molecularly imprinted polymers(STR-MIPs) with the introduction of different responsive groups on the basis of traditionally imprinted materials can undergo reversible transformations when exposed to external stimuli such as temperature, magnetism, pH or light. Such responsiveness, combined with the specific recognition, endows STR-MIPs with excellent perfor-mance in trace component studies. Traditional Chinese medicine(TCM) contains complex components with trace content, and thus STR-MIPs have broad application prospects in the enrichment analysis of trace components in TCM. This paper elaborates on the application of STR-MIPs in the enrichment analysis of trace components in TCM from the perspectives of different stimuli, summarized relevant research achievements in the recent five years to broaden the application fields of molecular imprinting, and proposed a few opi-nions about their future development.

Composite Hydrogel Microspheres Encapsulating Hollow Mesoporous Imprinted Nanoparticles for Selective Capture and Separation of 2'-Deoxyadenosine.

Hollow mesoporous silica nanoparticles have been widely applied as a carrier material in the molecular imprinting process because of their excellent properties, with high specific surface area and well-defined active centers. However, these kinds of materials face the inevitable problem that they have low mass transfer efficiency and cannot be conveniently recycled. In order to solve this problem, this work has developed a composite hydrogel microsphere (MMHSG) encapsulated with hollow mesoporous imprinted nanoparticles for the selective extraction of 2'-deoxyadenosine (dA). Subsequently, the hollow mesoporous imprinted polymers using dA as template molecule and synthesized 5-(2-carbomethoxyvinyl)-2'-deoxyuridine (AcrU) as functional monomer were encapsulated in hydrogel. MMHSG displayed good performance in specifically recognizing and quickly separating dA, whereas no imprinting effect was observed among 2'-deoxyguanosine (dG), deoxycytidine (dC), or 5'-monophosphate disodium salt (AMP). Moreover, the adsorption of dA by MMHSG followed chemisorption and could reach adsorption equilibrium within 60 min; the saturation adsorption capacity was 20.22 µmol·g-1. The introduction of AcrU could improve selectivity through base complementary pairing to greatly increase the imprinting factor to 3.79. Therefore, this was a successful attempt to combine a hydrogel with hollow mesoporous silica nanoparticles and molecularly imprinted material.

Enrichment of Quercetin from Winemaking Residual Diatomaceous Earth via a Tailor-Made Imprinted Adsorbent.

Residual diatomaceous earth (RDE) from winemaking activities is a rich and currently underexploited source of phenolic compounds which ought to be recycled from the perspective of circular bioeconomy. In this work, we demonstrate the feasibility of molecularly imprinted polymers (MIPs) for the enrichment of quercetin, a flavonoid at a fairly high content in residual diatomaceous earth. These MIPs were synthesized through free radical polymerization. FTIR confirmed the integration of the functional monomers into the polymeric chains. Batch adsorption experiments were used to assess the retention and selectivity of those MIPs towards quercetin. Commercial resins were compared with the synthesized materials using the same procedures. These adsorption experiments allowed the selection of the best performing MIP for the valorization of RDE extract. This treatment consisted of saturating the selected MIP with the extract and then desorbing the retained compounds using solvents of selected compositions. The desorbed fractions were analyzed using liquid chromatography, and the results demonstrated an increase in quercetin's fractional area from 5% in the RDE extract to more than 40% in some fractions, which is roughly an eightfold enrichment of quercetin. Moreover, other flavonoids of close chemical structure to quercetin have been rather retained and enriched by the MIP.

Enantioselective recognition of esomeprazole with a molecularly imprinted sol-gel-based electrochemical sensor.

A simple, selective, and accurate electrochemical chiral sensor based on molecularly imprinted polymer (MIP) has been developed for sensitive and selective detection of esomeprazole (ESOM). For this purpose, the porous MIP sensor was prepared using tetraethyl orthosilicate (TEOS) and cetyltrimethylammonium bromide (CTAB) in the presence of ß-cyclodextrin (ß-CD) as a chiral recognizing element on a glassy carbon electrode (GCE). The changes in the MIP-layer related to removal and rebinding of the target ESOM were performed via differential pulse voltammetry (DPV) and cyclic voltammetry (CV) by using [Fe(CN)6]3-/4- as the redox probe. The structures of the developed sensor surface were characterized by using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Electrochemical impedance spectroscopy (EIS) was also utilized for a complementary electrochemical characterization. The calibration curve was obtained in the range 1.0 × 10-14-2.0 × 10-13 M with a limit of detection (LOD) of 1.9 × 10-15 M. The developed method has improved the accessibility of binding sites by producing the porous material via hydrolysis/condensation reaction of TEOS in presence of CTAB. The selectivity tests of the developed SiO2-ß-CD@MIP/GCE sensor indicated a high specificity towards ESOM compared with structurally related competitor molecules such as R-omeprazole (R-OM), R-lansoprazole, and S-lansoprazole. The developed sensor was successfully used to determine ESOM in tablets and commercial human serum samples with satisfactory recoveries (100.25 to 100.60%) and precision (RSD 0.46 to 0.66%).

Thermosensitive molecularly imprinted polymer coupled with HPLC for selective enrichment and determination of matrine in traditional Chinese medicine.

In this study, a temperature-sensitive molecularly imprinted polymer was prepared by using the bifunctional monomer with the critical phase transition characteristics. Infrared spectrometry, scanning electron microscopy, and specific surface area testing were used to characterize the polymers. Then, the recognizing properties of the polymers were studied. Based on the prepared smart polymers, an SPE-HPLC analytical method for the determination of quinolizidine alkaloids in the extracts of Sophora flavescens was established and verified. Finally, the smart polymers were applied to the enrichment of quinolizidine alkaloids in plant extracts. By changing the temperature and solvents of the solid phase extraction conditions, the extraction process can increase the concentration of quinolizidine alkaloids by 4.3 to 5.2 folds. The extraction process has mild conditions and less time consumption, avoiding the use of a large number of toxic reagents, which indicate that the extraction process are more efficient and environmentally friendly.

Applications of Molecular Imprinting Technology in the Study of Traditional Chinese Medicine.

Traditional Chinese medicine (TCM) is one of the most internationally competitive industries. In the context of TCM modernization and internationalization, TCM-related research studies have entered a fast track of development. At the same time, research of TCM is also faced with challenges, such as matrix complexity, component diversity and low level of active components. As an interdisciplinary technology, molecular imprinting technology (MIT) has gained popularity in TCM study, owing to the produced molecularly imprinted polymers (MIPs) possessing the unique features of structure predictability, recognition specificity and application universality, as well as physical robustness, thermal stability, low cost and easy preparation. Herein, we comprehensively review the recent advances of MIT for TCM studies since 2017, focusing on two main aspects including extraction/separation and purification and detection of active components, and identification analysis of hazardous components. The fundamentals of MIT are briefly outlined and emerging preparation techniques for MIPs applied in TCM are highlighted, such as surface imprinting, nanoimprinting and multitemplate and multifunctional monomer imprinting. Then, applications of MIPs in common active components research including flavonoids, alkaloids, terpenoids, glycosides and polyphenols, etc. are respectively summarized, followed by screening and enantioseparation. Related identification detection of hazardous components from TCM itself, illegal addition, or pollution residues (e.g., heavy metals, pesticides) are discussed. Moreover, the applications of MIT in new formulation of TCM, chiral drug resolution and detection of growing environment are summarized. Finally, we propose some issues still to be solved and future research directions to be expected of MIT for TCM studies.

Molecularly Imprinted Polymer for a Smart Dispersive Micro-Solid Phase Extraction Technique for Assessing Trace Level Aflatoxins in Cultured Fish.

Molecularly imprinted technology (MIT) consists of preparing materials exhibiting specific recognition cavities to selective mimic the target analytes. The prepared materials promote selective interactions with the targets and avoid interactions of concomitants from complex food, biological, clinical, and environmental matrices. This chapter provides information on a recent development of a vortex-assisted micro-solid phase extraction using a molecularly imprinted polymer (MIP) as an adsorbent for aflatoxins (AFs) determination in cultured fish. MIP particles were synthesized by precipitation polymerization using 5,7-dimethoxycoumarin as a dummy template, methacrylic acid as a functional monomer, divinylbenzene as a cross-linker, and 2,2-azobisisobutyronitrile as an initiator. Polymerization following the precipitation method guarantees homogeneous particle size distribution and the integrity of the imprinted cavities. The MIP microparticles were found to have 5 µm in diameter and a spherical shape. Important parameters such as sample extract pH, adsorption stirring speed and time, desorption stirring speed and time, elution solvent composition and volume, and polymer mass, were fully optimized. The pre-concentration method allows therefore the assessment of four major AFs (B1, B2, G1, and G2) present in cultured fish at very low levels, with pre-concentration factors from 15 to 50 depending of the volume of extract used for performing the dispersive micro-solid phase extraction (D-µ-SPE).

Molecularly imprinted solid-phase extraction of Chikusetsu saponin IVa from Panacis majoris Rhizoma.

As the main active component of Panacis majoris Rhizoma, Chikusetsu saponin IVa has the activity of anti-oxidation, anti-inflammatory pain, and so on. Obtaining high purity Chikusetsu saponin IVa by simple purification steps is a prerequisite for its deep development. In this paper, the separation and purification of Chikusetsu saponin IVa were studied by molecular imprinting technique. By ultraviolet and visible spectrophotometry and computer molecular simulation, it was concluded that water-soluble 3-(2-carboxyethyl)-1-vinylimidazolium bromide ionic liquid was the best functional monomer compared with acrylic acid and acrylamide. The molecularly imprinted polymers were prepared by precipitation polymerization at 60℃ with Chikusetsu saponin IVa as template molecule, 3-(2-carboxyethyl)-1-vinylimidazolium bromide as functional monomer, ethylene glycol dimethacrylate as cross-linker, 2, 2'-azobisisobutyronitrile as initiator, and ethanol as porogen. The properties of molecularly imprinted polymers were studied by scanning electron microscopy, Fourier transform infrared spectroscopy, thermo-gravimetric analysis, nitrogen adsorption/desorption isotherm, and X-ray photoelectron spectroscopy. The maximum adsorption capacity was 171.33 mg/g, and the imprinting factor was 2.6. Finally, the polymers can be successfully used in the purification of Chikusetsu saponin IVa from Panacis majoris Rhizoma through a simple procedure, the content was significantly increased. The recoveries of the spiked samples for the CS-IVa ranged from 94.05 to 99.95% with relative standard deviation values lower than 2.67%. The results showed that the polymers demonstrated good adsorption capacity for Chikusetsu saponin IVa. Meanwhile, the polymers showed great stability and reusability during the application.

Separation and enrichment of sibiskoside from Sibiraea angustat with magnetic surface dummy template molecularly imprinted polymers.

In this work, a novel strategy was developed for separation and enrichment of sibiskoside by dummy molecular imprinting technology and magnetic separation technology. The structural analogue geniposide was selected as the dummy template, using 4-vinylpyridine as the functional monomer, ethylene glycol dimethacrylate as the cross-linking agent, and acetonitrile as the porogen. The molecularly imprinted layer was formed on the surface of the magnetic carrier to prepare dummy template molecularly imprinted polymers (DMIPs) with a core-shell structure. The DMIPs were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and Vibration sample magnetometer (VSM). The results of adsorption kinetics experiments and isothermal adsorption experiments showed that DMIPs can reach adsorption equilibrium in a short period of time and the maximum adsorption capacity can reach 14.67 mg/g. The imprinting factor was 2.08. Compared with the andrographolide, polydatin, arbutin, caffeic acid, neohesperidin dihydrochalcone and quercetin, DMIPs have good adsorption capacity for the sibiskoside. And the reusability was better. After the adsorption of DMIPs, the purity of sibiskoside in the crude extracts from Sibiraea angustata increased to 78%. It provided a basis for the further development and utilization of Sibiraea angustata as well as the separation and enrichment of monoterpenes.

A strategy of utilizing Cu2+-mediating interaction to prepare magnetic imprinted polymers for the selective detection of celastrol in traditional Chinese medicines.

In this work, a novel strategy to prepare molecularly imprinted polymers (MIPs) functionalized magnetic carbon nanotubes (MCNTs) via a facile sol-gel polymerization by adopting Cu2+-mediating interaction was presented for selective recognition of celastrol (Cel), in the traditional Chinese medicines (TCM). Firstly, template Cel, 3-aminopropyltriethoxysilane (APTES) as monomer and Cu2+ (co-monomer) were mixed to form a self-assembled pre-complex, in which Cu2+ could coordinate with Cel. Meanwhile, APTES plays a role of bridge between APTES and Cel. Secondly, carboxyl modified MCNTs as substrate was added into the pre-complex solution. After that, a multi-step sol-gel polymerization process was occurred in the presence of tetraethylorthosilicate as cross-linker and acetic acid as catalyst. Finally, MIPs layer was formed on the surface of the MCNTs (Cel-MIPs@MCNTs) after the removal of template with methanol/acetic. The morphology and structure of Cel-MIPs@MCNTs was investigated by various characterization techniques. The adsorption performance of Cel-MIPs@MCNTs to Cel was illustrated by kinetic, isothermal and selective binding experiments. The results displayed that the Cel-MIPs@MCNTs possessed fast kinetic equilibrium time (40 s), high adsorption capacity (13.35 µg mg-1), good imprinting factor of 3.41, and high magnetic responsivity (44.38 emu·g-1), which can be used as an ideal adsorbent for rapid isolation and enrichment of target analytes. A selective and sensitive method based on Cel-MIPs@MCNTs coupling with HPLC was developed for Cel determination including a wide linear range (0.15-200 µg mL-1) with correlation coefficient of 0.9998, a low limit of detection (0.05 µg mL-1). Furthermore, the applicability of Cel-MIPs@MCNTs was demonstrated to isolate and determine Cel in TCM samples with satisfactory recoveries ranged from 84.47% to 91.5% (RSD<5.35%). The results revealed that Cel-MIPs@MCNTs offer great potential as an adsorbent for selective and efficient isolation of Cel from complex TCM samples.

Hydrophilic molecularly imprinted polymers functionalized magnetic carbon nanotubes for selective extraction of cyclic adenosine monophosphate from winter jujube.

In this work, a green strategy was developed to prepare molecularly imprinted polymers functionalized magnetic carbon nanotubes in aqueous phase under mild conditions for cyclic adenosine monophosphate. Thanks to water solubility of chitosan, a natural polysaccharide which is rich in amino and hydroxyl groups, provided the feasibility to synthesize the green molecularly imprinted polymers for water soluble template in aqueous media. Coupled with high-performance liquid chromatography, the method exhibited a short equilibrium time (6 min), high adsorption capacity (22.42 µg/mg), high magnetic susceptibility, and good selectivity to template molecule with the imprinting factor of 2.94. A good linearity in the range of 0.020-3.0 mg/mL for target was obtained with a correlation coefficient of 0.9998. The limit of detection (signal-to-noise ratio = 3) and limit of quantitation (signal-to-noise ratio = 10) of the magnetic solid phase extraction method for cyclic adenosine monophosphate were 5 and 15 ng/mg, respectively. And the practical application of chitosan-based molecularly imprinted polymers as adsorbent to isolate and determine cyclic adenosine monophosphate in real natural samples (winter jujube) was demonstrated.

Deviation of Trypsin Activity Using Peptide Conformational Imprints.

In this study, a methodology utilizing peptide conformational imprints (PCIs) as a tool to specifically immobilize porcine pancreatic alpha-trypsin (PPT) at a targeted position is demonstrated. Owing to the fabrication of segment-mediated PCIs on the magnetic particles (PCIMPs), elegant cavities complementary to the PPT structure are constructed. Based on the sequence on targeted PPT, the individual region of the enzyme is trapped with different template-derived PCIMPs to show certain types of inhibition. Upon hydrolysis, N-benzoyl-L-arginine ethyl ester (BAEE) is employed to assess the hydrolytic activity of PCIMPs bound to the trypsin using high-performance liquid chromatography (HPLC) analysis. Further, the kinetic data of four different PCIMPs are compared. As a result, the PCIMPs presented non-competitive inhibition toward trypsin, according to the Lineweaver-Burk plot. Further, the kinetic analysis confirmed that the best parameters of PPT/PCIMPs 233-245+G were Vmax = 1.47 × 10-3 mM s-1, Km = 0.42 mM, kcat = 1.16 s-1, and kcat/Km = 2.79 mM-1 s-1. As PPT is bound tightly to the correct position, its catalytic activities could be sustained. Additionally, our findings stated that the immobilized PPT could maintain stable activity even after four successive cycles.

Molecularly Imprinted Polymer (MIP) Applications in Natural Product Studies Based on Medicinal Plant and Secondary Metabolite Analysis.

Characterization and extraction of plant secondary metabolites are important in agriculture, pharmaceutical, and food industry. In this regard, the applied analytical methods are mostly costly and time-consuming; therefore, choosing a suitable approach is essential for optimum results and economic suitability. One of the recently considered methods used to characterize new types of materials is MIPs. Among the various applications of MIPs is the identification and separation of various plant-derived compounds, such as secondary metabolites, chemical residues, and pesticides. The present review describes the application of MIPs as a tool in medicinal plant material analysis, focusing on plant secondary metabolism.

Nano-sized Fe3O4@SiO2-molecular imprinted polymer as a sorbent for dispersive solid-phase microextraction of melatonin in the methanolic extract of Portulaca oleracea, biological, and water samples.

In this study, a magnetic molecularly imprinted polymer (MMIP (Fe3O4@SiO2-MIP)) was used for the dispersive magnetic solid-phase microextraction (d-MSP-µ-E) to design an easy and effective method for melatonin (MLT) extraction in the methanolic extract of Portulaca oleracea, human urine and plasma, and water samples. HPLC with UV detection was utilized, and pH, the type and volume of eluent, MMIP mass, and contact time were considered as effective factors in the study of MLT separation and pre-concentration. These factors were optimized by Plackett-Burman and multi-objective response surface methodology (RSM). The values were 10 mg, 14 min, 4.2, methanol, 0.180 mL, 2.5 min, for the MMIP mass, time of sorption, sample pH, eluent type, eluent volume, and time of elution, respectively. At the optimum conditions, the limit of detection (LOD) was 0.046 ng mL-1, and the limit of quantification (LOQ) was 0.156 ng mL-1. The sorption capacity of the proposed MMIP sorbent was 109.1 mg g-1 at the optimum conditions. Besides, linear dynamic range (LDR) was 0.2-4200 ng mL-1, and the precision of the method (RSD %) for triplicate measurements was <6.1%. The MMIP showed saturation magnetization of 19.75 emu g-1, resulting in fast separation of the sorbent. The sorption test revealed the high sorption capacity of the MMIP for MLT and its homogeneous binding sites. In all spiked levels (50, 100, 200, and 500 ng mL-1), 93.07-104.1% was the range obtained for the recovery of MLT. The relative selectivity factor (ß) values of MLT/tryptophan, MLT/serotonin, MLT/ferulic acid, MLT/mefenamic acid, MLT/quercetin, MLT/luteolin, and MLT/chlorogenic acid were 1.60, 1.68, 2.02, 2.38, 2.32, 2.40, and 2.50, respectively. The results of desorption-regeneration cycles (seven times) by employing the MMIP showed the high stability of the resultant material. In conclusion, the MMIP combined with the magnetic separation showed a specific sorption behavior for MLT and suggested a simple, flexible, selective, and powerful analytical tool.

Molecularly imprinted polymer nanogel-based fluorescence sensing of pork contamination in halal meat extracts.

Pork contamination is a serious concern for the global halal food market because many manufacturers commonly use pork instead of beef to reduce production costs. In this study, a highly sensitive fluorescent molecularly imprinted polymer nanogel (F-MIP-NG)-based sensor was developed for rapid porcine serum albumin (PSA) detection to investigate pork contamination in halal meat extracts. F-MIP-NGs were prepared via molecular imprinting and conjugation with ATTO 647N as the fluorescent reporter molecule for the post-imprinting modification (PIM) and then immobilized on gold-coated sensor chips. For achieving rapid and easy measurement, the fluorescence response was measured using a custom-made liquid handling robot equipped with a fluorescence microscope. The fluorescence response increased with increasing PSA concentration. Under optimal conditions, the F-MIP-NG-based sensors exhibited high sensitivity, a detection limit of 40 pM, a linear range of 0.25-5 nM, and excellent affinity and selectivity towards PSA, compared to potentially interfering proteins. Moreover, it was more efficient to detect beef contamination in 1 wt% pork contamination compared to the real-time polymerase chain reaction. Collectively the good analytical performance, high rates of recovery in real meat extract samples, fast detection, and a low detection limit of pork contamination (0.1 wt%) indicated the potential of the proposed sensor for detecting PSA as a marker of pork contamination in halal meat samples. The proposed sensing system based on the MIPs would open a way to establish highly sensitive and rapid sensing systems (<5 min/sample) for food analysis.

Selective separation and purification of polydatin by molecularly imprinted polymers from the extract of Polygoni Cuspidati Rhizoma et Radix, rats' plasma and urine.

Molecularly imprinted polymers (MIPs) based on polydatin were prepared by precipitation polymerization method. Synthesis process of MIPs was optimized by discussion of functional monomers, porogens and the molar ratio of template- functional monomer-cross linker. Then, MIPs were prepared with polydatin as the template, 4-vinyl pyridine as the functional monomer, ethylene glycol dimethyl acrylate as the cross linker, acetonitrile as the porogen and the molar ratio of template-monomer-cross linker at 1:10:20. Scanning electron microscopy and Fourier transform infrared spectrometer were used to inspect macroscale and chemical bond of MIPs. Adsorption capability and selectivity of MIPs to polydatin were investigated by carrying out the static, dynamic and selective experiments. The results showed MIPs performed high adsorption ability and selectivity to polydatin, indicating MIPs could be used to separate and enrich polydatin from the complex systems. Finally, MIPs were applied as the adsorbent for isolation and purification of polydatin from the extract of Polygoni Cuspidati Rhizoma et Radix, rats' plasma and urine samples. MIPs were successfully used to separate polydatin from the Polygoni Cuspidati Rhizoma et Radix and recovery ranged from 89.2% to 91.6%. The maximum concentration of polydatin in rats' plasma and urine samples was 2.84 ± 0.0748 µg mL-1 and 2.64 ± 0.485 µg mL-1, respectively. Moreover, to compare with the MIPs method, organic solvent methods were used to analyze the polydatin in rats' plasma and urine samples. The results illustrated MIPs method was effective and selective for enrichment of polydatin from the medicinal plants and biological samples.