Mechanical and Acoustic Properties of Alloys Used for Musical Instruments.

Music should be integrated into our daily activities due to its great effects on human holistic health, through its characteristics of melody, rhythm and harmony. Music orchestras use different instruments, with strings, bow, percussion, wind, keyboards, etc. Musical triangles, although not so well known by the general public, are appreciated for their crystalline and percussive sound. Even if it is a seemingly simple instrument being made of a bent metal bar, the problem of the dynamics of the musical triangle is complex. The novelty of the paper consists in the ways of investigating the elastic and dynamic properties of the two types of materials used for musical triangles. Thus, to determine the mechanical properties, samples of material from the two types of triangles were obtained and tested by the tensile test. The validation of the results was carried out by means of another method, based on the modal analysis of a ternary system; by applying the intrinsic transfer matrix, the difference between the obtained values was less than 5%. As the two materials behaved differently at rupture, one having a ductile character and the other brittle, the morphology of the fracture surface and the elementary chemical composition were investigated by scanning electron microscopy (SEM) and analysis by X-ray spectroscopy with dispersion energy (EDX). The results were further transferred to the finite element modal analysis in order to obtain the frequency spectrum and vibration modes of the musical triangles. The modal analysis indicated that the first eigenfrequency differs by about 5.17% from one material to another. The first mode of vibration takes place in the plane of the triangle (transverse mode), at a frequency of 156 Hz and the second mode at 162 Hz, which occurs due to vibrations of the free sides of the triangle outside the plane, called the torsion mode. The highest dominant frequency of 1876 Hz and the sound speed of 5089 m/s were recorded for the aluminum sample with the ductile fracture in comparison with the dominant frequency of 1637 Hz and the sound speed of 4889 m/s in the case of the stainless steel sample, characterized by brittle fracture.

Catalytic Transesterification of Starch with Plant Oils: A Sustainable and Efficient Route to Fatty Acid Starch Esters.

The transesterification of maize starch with olive oil or high oleic sunflower oil was studied under homogeneous conditions in the presence of 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) as catalyst. Most importantly, this method used two renewable resources directly, without any pretreatment or derivatization, for the synthesis of polymeric materials with desirable properties. Moreover, the solvent, oils, and catalyst could be recovered through facile work-up and reused for further modifications. The obtained fatty acid starch esters (FASEs) were highly soluble in common organic solvents and were thoroughly characterized. Degrees of substitution (DS) were calculated using 31 P NMR spectroscopy, and DS values of approximately 1.3 were obtained. Differential scanning calorimetry analysis revealed thermal transitions of the modified starches at approximately 80-90 °C. Films were produced from these FASEs, and their hydrophobic surfaces were characterized using contact-angle measurements. Furthermore, mechanical properties were examined using tensile strength measurements and showed approximately 40 and 80 % elongation at break for modified maize starch and modified amylose from maize, respectively.

The effect of erythropoietin on biomechanical properties of the Achilles tendon during the healing process: an experimental study.

BACKGROUND: The aim of this study was to examine the potential biomechanical and histological benefits of systemic erythropoietin administration during the healing of Achilles tendon injury in a rat experimental model. METHODS: Eighty Sprague-Dawley female rats were included in this study. Animals were randomly assigned into two groups with 40 animals in each: erythropoietin group and control group. Then each group was further divided into four subgroups corresponding to four time points with 10 animals in each. A full-thickness cut was made on the Achilles tendon of each animal and then the tendon was sutured with modified Kessler method. Erythropoietin groups received intraperitoneal erythropoietin (500 IU/kg/day) every day at same time throughout the study period, and the control groups received saline in a similar manner. Animals were sacrificed at four time points, and tensile test was performed on each tendon sample to assess maximum load for each sample. In addition, histopathological examination and scoring was done. RESULTS: Both groups had improvement on tensile test (maximum load) over time. However, groups did not differ with regard to maximum load in any of the time points. Similarly, groups did not differ with regard to any of the histopathological scores over time. CONCLUSIONS: The findings of this study do not support the benefit of systemic erythropoietin administration in Achilles tendon healing process. Further evidence from larger experimental studies is required to justify any such potential benefit.

Mechanical characterization of outer epidermal middle lamella of onion under tensile loading.

UNLABELLED: • PREMISE OF THE STUDY: The cells in plant tissue are joined together by a distinct layer called the middle lamella (ML). Understanding the mechanical properties of the ML is crucial in studying how tissue-level mechanical properties emerge from the subcellular-level mechanical properties. However, the nanoscale size of the ML presents formidable challenges to its characterization as a separate layer. Consequently, the mechanical properties of the ML under tensile loading are as yet unknown.• METHODS: Here, we characterize the ML from a subcellular sample excised from two adjacent cells and composed of two wall fragments and a single line of ML in between. Two techniques, cryotome sectioning and milling with a focused ion beam, were used to prepare ML samples, and tensile experiments were performed using microelectromechanical system (MEMS) tensile testing devices.• KEY RESULTS: Our test results showed that even at a subcellular scale, the ML appears to be stronger than the wall fragments. There was also evidence that the ML attached at the corner of cells more strongly than at the rest of the contact area. The contribution of the additional ML contact area was estimated to be 40.6 MPa. Wall fragment samples containing an ML layer were also significantly stronger (p < 0.05) than the wall fragments without an ML layer.• CONCLUSIONS: The tensile properties of the ML might not have a major impact on the tissue-scale mechanical properties. This conclusion calls for further study of the ML, including characterization under shear loading conditions and elucidation of the contributions of other extracellular parameters, such as cell size and shape, to the overall tissue-level mechanical response.

Characterizing microscale biological samples under tensile loading: stress-strain behavior of cell wall fragment of onion outer epidermis.

PREMISE OF THE STUDY: The results of published studies investigating the tissue-scale mechanical properties of plant cell walls are confounded by the unknown contributions of the middle lamella and the shape and size of each cell. However, due to their microscale size, cell walls have not yet been characterized at the wall fragment level under tensile loading. It is imperative to understand the stress-strain behavior of cell wall fragments to relate the wall's mechanical properties to its architecture. • METHODS: This study reports a novel method used to characterize wall fragments under tensile loading. Cell wall fragments from onion outer epidermal peels were cut to the desired size (15 × 5 µm) using the focused ion beam milling technique, and these fragments were manipulated onto a microelectromechanical system (MEMS) tensile testing device. The stress-strain behavior of the wall fragments both in the major and minor growth directions were characterized in vacuo. • KEY RESULTS: The measured mean modulus, fracture strength, and fracture strain in the major growth direction were 3.7 ± 0.8 GPa, 95.5 ± 24.1 MPa, and 3.0 ± 0.5%, respectively. The corresponding properties along the minor growth direction were 4.9 ± 1.2 GPa, 159 ± 48.4 MPa, and 3.8 ± 0.5%, respectively. • CONCLUSIONS: The fracture strength and fracture strain were significantly different along the major and minor growth directions, the wall fragment level modulus of elasticity anisotropy for a dehydrated cell wall was 1.23, suggesting a limited anisotropy of the cell wall itself compared with tissue-scale results.