IDDSI-compliant recipes containing oral contrast agents for radiological dysphagia diagnostics.

Videofluoroscopic swallowing study (VFSS), alongside flexible endoscopic evaluation of swallowing, represents the gold standard for diagnosing swallowing disorders and to determine severity, pathophysiology, and effective interventions, including texture modification. The clinical swallowing examination and assessment supplements these instrumental methods and serves as the basis for the modules of swallowing diagnostics. The adaptation of food and drink consistencies in dysphagia management has become widespread. For valid results of a VFSS with respect to confirming swallowing safety and efficiency of different liquid and food consistencies and textures, the use of uniform recipes containing radio-opaque contrast media is important. Our goal was to identify recipes that would produce consistencies that conform to the liquid and food levels of 0-7, as defined by the International Dysphagia Diet Standardization Initiative (IDDSI), with barium- and iodine-based contrast media, xanthan gum-based thickeners, and other edible components, which also show sufficient contrast on VFSS. In this study, we determined the different recipes using IDDSI testing methods and explored their radiological characteristics using a Philips MultiDiagnost Eleva fluoroscopy system and two different fluid contrast agents: barium- (Micropaque®) and iodine-based (Telebrix®). All recipes showed sufficient contrast on fluoroscopy and could be visualized in the amounts used for swallowing examinations. They were practical and easy to implement in terms of production and availability of the components. The homogeneity of the recipes diminished with higher IDDSI levels, which represent transitional food, but appeared still sufficient for fluoroscopic examination. The opacity did not significantly differ between the barium- and iodine-based contrast media.

The interpretable machine learning model associated with metal mixtures to identify hypertension via EMR mining method.

There are limited data available regarding the connection between hypertension and heavy metal exposure. The authors intend to establish an interpretable machine learning (ML) model with high efficiency and robustness that identifies hypertension based on heavy metal exposure. Our datasets were obtained from the US National Health and Nutrition Examination Survey (NHANES, 2013-2020.3). The authors developed 5 ML models for hypertension identification by heavy metal exposure, and tested them by 10 discrimination characteristics. Further, the authors chose the optimally performing model after parameter adjustment by Genetic Algorithm (GA) for identification. Finally, in order to visualize the model's ability to make decisions, the authors used SHapley Additive exPlanation (SHAP) and Local Interpretable Model-Agnostic Explanations (LIME) algorithm to illustrate the features. The study included 19 368 participants in total. A best-performing eXtreme Gradient Boosting (XGB) with GA for hypertension identification by 16 heavy metals was selected (AUC: 0.774; 95% CI: 0.772-0.776; accuracy: 87.7%). According to SHAP values, Barium (0.02), Cadmium (0.017), Lead (0.017), Antimony (0.008), Tin (0.007), Manganese (0.006), Thallium (0.004), Tungsten (0.004) in urine, and Lead (0.048), Mercury (0.035), Selenium (0.05), Manganese (0.007) in blood positively influenced the model, while Cadmium (-0.001) in urine negatively influenced the model. Study participants' hypertension associated with heavy metal exposure was identified by an efficient, robust, and interpretable GA-XGB model with SHAP and LIME. Barium, Cadmium, Lead, Antimony, Tin, Manganese, Thallium, Tungsten in urine, and Lead, Mercury, Selenium, Manganese in blood are positively correlated with hypertension, while Cadmium in blood is negatively correlated with hypertension.

Porous Titanium Scaffolds with Mechanoelectrical Conversion and Photothermal Function: A Win-Win Strategy for Bone Reconstruction of Tumor-Resected Defects.

Bone metastases severely threaten the lives of patients. Although surgical treatment combined with adjuvant chemotherapy significantly improves the survival rate of patients, tumor recurrence, or metastasis after surgical resection and bone defects caused by surgical treatment remain major challenges for clinicians. Given the abovementioned clinical requirements, barium titanate-containing iron-coated porous titanium alloy scaffolds have been proposed to promote bone defect repair and inhibit tumor recurrence. Fortunately, in vitro and in vivo experimental research confirms that barium titanate containing iron-coated porous titanium alloy scaffolds promote osteogenesis and bone reconstruction in defect repair via mechanoelectric conversion and inhibit tumor recurrence via photothermal effects. Furthermore, the underlying and intricate mechanisms of bone defect repair and tumor recurrence prevention of barium titanate-containing iron-coated porous titanium alloy scaffolds are explored. A win-win strategy for mechanoelectrical conversion and photothermal functionalization provides promising insights into bone reconstruction of tumor-resected defects.

Effect of Chaihu-Shugan-San on functional dyspepsia and gut microbiota: A randomized, double-blind, placebo-controlled trial.

ETHNOPHARMACOLOGICAL RELEVANCE: Chaihu-Shugan-San (CSS) is a classic traditional Chinese medicine (TCM) formula from the Ming Dynasty "Jingyue's Complete Works". In China, it is prevalent for the treatment of a wide range of ailments, with a particular emphasis on functional gastrointestinal disorders (FGIDs). Clinical evidence suggests that CSS has been found to be a highly effective therapeutic approach for the treatment of Functional Dyspepsia (FD), however, there is a limited amount of high-quality clinical evidence, particularly randomized, double-blind, placebo-controlled trials to support this claim. AIM OF THE STUDY: To evaluate the therapeutic efficacy of Chaihu-Shugan-San (CSS) for treating functional dyspepsia (FD) by comparing it to placebos, as well as to investigate the impact of CSS on the gut microbiota in individuals diagnosed with FD. MATERIALS AND METHODS: This was a randomized double-blind, placebo-controlled clinical trial implemented at Shuguang Hospital in Shanghai. Between May 2021 and December 2022, 94 participants satisfying the Rome IV diagnostic criteria for FD were enrolled. They were assigned randomly to either the CSS group or the placebo group, with an equal allocation ratio of 1:1. Patients in both groups received the intervention for four weeks. The primary outcome was the dyspepsia symptom scores evaluated by using single dyspepsia symptom scale (SDS) after four weeks of treatment. The secondary outcomes were the solid gastric empties rate measured by a barium strip method, Hamilton anxiety scale (HAMA), Hamilton depression scale (HAMD), and Functional dyspepsia Quality of life scale (FDDQL). In addition, after unblinding, 30 patients in the CSS group were randomly selected and divided into before and after treatment of the FD groups (FD1, FD2), and 30 healthy participants were selected as healthy control group (HC), and the gut microbiota was analyzed by 16S rRNA sequencing. RESULTS: After four weeks of treatment, the SDS score exhibited a significant improvement in the CSS group compared to the placebo group (t = 4.882; P ＜0.001). The difference in barium strip gastric emptying rate in the CSS group showed a significant ascent compared to the control group (P < 0.01). The HAMA, HAMD, and FDDQL scores in the CSS group showed a statistically significant increase compared to the control group (all P < 0.01). The results of 16S rRNA sequencing revealed that FD patients had less diverse and abundant microbiota than the healthy people. Additionally, the application of CSS resulted in the modulation of certain bacterial populations, leading to both up-regulation and down-regulation of their quantities. CONCLUSIONS: These findings suggested that CSS is more effective compared to a placebo in treating FD, relieves anxiety and depression, increases gastric emptying rate in FD patients, and that CSS also affects the bacterial community structure in FD patients. TRIAL REGISTRATION: ChiCTR, ChiCTR2100045793. Registered 25 Mach 2021.

Association between exposure to mixture of heavy metals and hyperlipidemia risk among U.S. adults: A cross-sectional study.

Previous studies have suggested that exposure to heavy metals might increase the risk of hyperlipidemia. However, limited research has investigated the association between exposure to mixture of heavy metals and hyperlipidemia risk. To explore the independent and combined effects of heavy metal exposure on hyperlipidemia risk, this study involved 3293 participants from the National Health and Nutrition Examination Survey (NHANES), including 2327 with hyperlipidemia and the remaining without. In the individual metal analysis, the logistic regression model confirmed the positive effects of barium (Ba), cadmium (Cd), mercury (Hg), Lead (Pb), and uranium (U) on hyperlipidemia risk, Ba, Cd, Hg and Pb were further validated in restricted cubic splines (RCS) regression model and identified as positive linear relationships. In the metal mixture analysis, weighted quantile sum (WQS) regression, Bayesian kernel machine regression (BKMR), and quantile-based g computation (qgcomp) models consistently revealed a positive correlation between exposure to metal mixture and hyperlipidemia risk, with Ba, Cd, Hg, Pb, and U having significant positive driving roles in the overall effects. These associations were more prominent in young/middle-aged individuals. Moreover, the BKMR model uncovered some interactions between specific heavy metals. In conclusion, this study offers new evidence supporting the link between combined exposure to multiple heavy metals and hyperlipidemia risk, but considering the limitations of this study, further prospective research is required.

Heterostructured piezocatalytic nanoparticles with enhanced ultrasound response for efficient repair of infectious bone defects.

Infection of bone defects remains a challenging issue in clinical practice, resulting in various complications. The current clinical treatments include antibiotic therapy and surgical debridement, which can cause drug-resistance and potential postoperative complications. Therefore, there is an urgent need for an efficient treatment to sterilize and promote bone repair in situ. In this work, an ultrasound responsive selenium modified barium titanate nanoparticle (Se@BTO NP) was fabricated, which exhibited significant antibacterial and bone regeneration effects. Selenium nanoparticle (Se NP) was modified on the surface of barium titanate nanoparticle (BTO NP) to form heterostructure, which facilitated the second distribution of piezo-induced carriers under ultrasound (US) irradiation and improved the separation of electron-hole pairs. The Se@BTO NPs exhibited remarkable antibacterial efficiency with an antibacterial rate of 99.23 % against Staphylococcus aureus (S.aureus) and significantly promoted the osteogenic differentiation under ultrasound irradiation. The in vivo experiments exhibited that Se@BTO NPs successfully repaired the femoral condylar bone defects of rats infected by S.aureus, resulting in significant promotion of bone regeneration. Overall, this work provided an innovative strategy for the utilization of US responsive nanomaterials in efficient bacteria elimination and bone regeneration. STATEMENT OF SIGNIFICANCE: Infectious bone defects remain a challenging issue in clinical practice. Current antibiotic therapy and surgical debridement has numerous limitations such as drug-resistance and potential complications. Herein, we designed an innovative ultrasound responsive selenium modified barium titanate nanoparticle (Se@BTO NP) to achieve efficient non-invasive bacteria elimination and bone regeneration. In this work, Se@BTO nanoparticles can enhance the separation of electrons and holes, facilitate the transfer of free carriers due to the cooperative effect of ultrasound induced piezoelectric field and heterojunction construction, and thus exhibit remarkable antibacterial and osteogenesis effect. Overall, our study provided a promising strategy for the utilization of piezocatalytic nanomaterials in efficient antibacterial and bone regeneration.

Combined exposure to multiple metals on hypertension in NHANES under four statistical models.

Metals exposure has gained increasing attention in the hypertension prevention. However, previous studies have focused on the impacts of single or separated metals on hypertension, and the critical metals contributing to the prevalence of hypertension are still under discussion. We collected data from 5092 participants across three consecutive National Health and Nutrition Examination Survey (NHANES) circles (2011-2016). Weighted logistic regression, weighted quantile sum (WQS) regression, quantile-based g-computation (QGC), and Bayesian kernel machine regression (BKMR) analyses were conducted to evaluate the combined and individual effects of 15 urinary metals, as well as to identify the critical metals on the development of hypertension. In our study, the weighted prevalence of hypertension was 37.9%, and the average age was 47.42 years. Manganese, uranium and tin were found as the independent risk factors for hypertension, while barium, lead, and thallium were found to have protective effects against hypertension. Lead, barium, tungsten, uranium, and tin were determined as critical elements for the prediction of hypertension. No significant interaction relationship was detected between multiple metals. There might be potential positive combined effects of urinary metal mixture on hypertension. Tungsten, uranium, and tin were positively associated with hypertension while lead and barium were negatively associated with hypertension. The underlying mechanisms of urinary metal exposure on the risk of hypertension deserve further investigations.

A biocompatible nano-barium sulfonate system for quad-modal imaging-guided photothermal radiotherapy of tumors.

Integration of multi-modal imaging techniques and various cancer treatments based on their respective characteristics would be beneficial for enhancing anticancer efficacy. Exploiting an "all-in-one" nanoparticle with high biocompatibility has attracted widespread attention. Herein, two clinically proven modalities, human serum albumin (HSA) and indocyanine green (ICG), were selected to create HSA-stable barium sulfonate nanoparticles (HSA@ICG-Ba) through the reaction of a sulfonic acid group with barium ions. Our nano-probe showed excellent optical properties and X-ray absorption capacity, which can be applied in tumor theranostics. Utilizing the rich tumor accumulation of HSA@ICG-Ba, this nanoparticle can obtain multifaceted tumor information through fluorescence (FL), computerized tomography (CT), photoacoustic (PA) imaging, and single photon emission computed tomography (SPECT) imaging. Additionally, radiation sensitization therapy and photothermal therapy based on HSA@ICG-Ba were evaluated using both in vitro and in vivo models. The efficacy of tumor radiotherapy can be further improved by mild hyperthermia owing to the relieved tumor hypoxia. Finally, the favorable safety profile of HSA@ICG-Ba is confirmed by blood index analysis and tissue section observation. Therefore, this study explored an "all-in-one" barium sulfonate nanoparticle with high biocompatibility for FL/CT/PA/SPECT imaging-guided synergetic photothermal-radiotherapy of tumors, providing a new approach and potential pathway for tumor theranostics.

A State-of-the-Science Review on Metal Biomarkers.

PURPOSE OF REVIEW: Biomarkers are commonly used in epidemiological studies to assess metals and metalloid exposure and estimate internal dose, as they integrate multiple sources and routes of exposure. Researchers are increasingly using multi-metal panels and innovative statistical methods to understand how exposure to real-world metal mixtures affects human health. Metals have both common and unique sources and routes of exposure, as well as biotransformation and elimination pathways. The development of multi-element analytical technology allows researchers to examine a broad spectrum of metals in their studies; however, their interpretation is complex as they can reflect different windows of exposure and several biomarkers have critical limitations. This review elaborates on more than 500 scientific publications to discuss major sources of exposure, biotransformation and elimination, and biomarkers of exposure and internal dose for 12 metals/metalloids, including 8 non-essential elements (arsenic, barium, cadmium, lead, mercury, nickel, tin, uranium) and 4 essential elements (manganese, molybdenum, selenium, and zinc) commonly used in multi-element analyses. RECENT FINDINGS: We conclude that not all metal biomarkers are adequate measures of exposure and that understanding the metabolic biotransformation and elimination of metals is key to metal biomarker interpretation. For example, whole blood is a good biomarker of exposure to arsenic, cadmium, lead, mercury, and tin, but it is not a good indicator for barium, nickel, and uranium. For some essential metals, the interpretation of whole blood biomarkers is unclear. Urine is the most commonly used biomarker of exposure across metals but it should not be used to assess lead exposure. Essential metals such as zinc and manganese are tightly regulated by homeostatic processes; thus, elevated levels in urine may reflect body loss and metabolic processes rather than excess exposure. Total urinary arsenic may reflect exposure to both organic and inorganic arsenic, thus, arsenic speciation and adjustment for arsebonetaine are needed in populations with dietary seafood consumption. Hair and nails primarily reflect exposure to organic mercury, except in populations exposed to high levels of inorganic mercury such as in occupational and environmental settings. When selecting biomarkers, it is also critical to consider the exposure window of interest. Most populations are chronically exposed to metals in the low-to-moderate range, yet many biomarkers reflect recent exposures. Toenails are emerging biomarkers in this regard. They are reliable biomarkers of long-term exposure for arsenic, mercury, manganese, and selenium. However, more research is needed to understand the role of nails as a biomarker of exposure to other metals. Similarly, teeth are increasingly used to assess lifelong exposures to several essential and non-essential metals such as lead, including during the prenatal window. As metals epidemiology moves towards embracing a multi-metal/mixtures approach and expanding metal panels to include less commonly studied metals, it is important for researchers to have a strong knowledge base about the metal biomarkers included in their research. This review aims to aid metals researchers in their analysis planning, facilitate sound analytical decision-making, as well as appropriate understanding and interpretation of results.

Associations of exposure to blood and urinary heavy metal mixtures with psoriasis risk among U.S. adults: A cross-sectional study.

Accumulating evidence showed that environmental exposure to toxic metals was harmful to human health. However, information about the effects of exposure to metal mixtures on psoriasis was scarce. To investigate the independent and comprehensive associations between heavy metal co-exposure and psoriasis in adults, data of 6534 adults aged 20-80 years from the National Health and Nutrition Examination Survey (NHANES) were used. Among them, 187 (2.86 %) were diagnosed with psoriasis and the rest were participants without psoriasis. We examined the independent and combined associations of 3 blood metals and 11 urinary metals with psoriasis risk. In the single-metal analyses, urinary barium (Ba), cesium (Cs), antimony (Sb), uranium (Ur), and cadmium (Cd) were positively correlated with psoriasis risk, while urinary molybdenum (Mo) was identified as a protective factor for psoriasis. Moreover, weighted quantile sum (WQS) regression and Bayesian kernel machine regression (BKMR) models consistently revealed the positive effect of urinary metal co-exposure on psoriasis risk. The associations were more evident in the young and middle-aged group than the elderly group. In the urinary mixtures, Ba was the highest weighted metal in the whole population and the young and middle-aged people, whereas Sb was the top weighted metal in the elderly group. Additionally, BKMR analysis revealed the potential interaction between certain components of urinary metal mixtures in psoriasis. The results of quantile-based g computation (qgcomp) model further proved the toxic effect of urinary metal mixtures on psoriasis, and the positive linear relationship between urinary Ba and psoriasis risk was identified by restricted cubic splines (RCS) regression. We concluded that co-exposure to multiple heavy metals was associated with psoriasis risk. Given the limitations of the NHANES study, further prospective designed studies are warranted.

Assessment of barium diffusion from therapeutic mud wrapped in micro-perforated polyethylene bags towards the human organism.

Barium is present within the clay-derived therapeutic mud packs deposed on the patient's skin for treating some rheumatologic conditions. We studied in twenty-four young healthy volunteers the diffusion of Ba from mud wrapped in micro-perforated polyethylene bags and soaked in mineral water. No significant systematic increase in plasma or urine Ba levels was evidenced when comparing pre- and post-treatment samples using inductively-coupled plasma mass spectrometry. These levels were markedly inferior to the recommended thresholds in nearly all the participants. Noticeably variability in blood and especially urine Ba concentrations was large and mainly explained by environmental exposure (alimentation). Interestingly, we evidenced an intense Ba accumulation within the therapeutic mud at the end of the regimen. Because we chose a clay with one of the highest Ba content available in France for medical therapy and participants with an optimal transcutaneous diffusion capacity (young individuals with low-fat mass), we conclude unambiguously that there is no risk of Ba overexposure in patients receiving pelotherapy according to the procedure used in French medical spas.

Tumor-targeted molybdenum disulfide@barium titanate core-shell nanomedicine for dual photothermal and chemotherapy of triple-negative breast cancer cells.

Combinational therapy can improve the effectiveness of cancer treatment by overcoming individual therapy shortcomings, leading to accelerated cancer cell apoptosis. Combinational cancer therapy is attained by a single nanosystem with multiple physicochemical properties providing an efficient synergistic therapy against cancer cells. Herein, we report a folate receptor-targeting dual-therapeutic (photothermal and chemotherapy) core-shell nanoparticle (CSNP) exhibiting a molybdenum disulfide core with a barium titanate shell (MoS2@BT) to improve therapeutic efficacy against triple-negative breast cancer (TNBC) MDA-MB-231 cells. A simple hydrothermal approach was used to achieve the MoS2@BT CSNPs, and their diameter was calculated to be approximately 180 ± 25 nm. In addition to improving the photothermal efficiency and stability of the MoS2@BT CSNPs, their surface was functionalized with polydopamine (PDA) and subsequently modified with folic acid (FA) to achieve enhanced tumour-targeting CSNPs, named MoS2@BT-PDA-FA (MBPF). Then, gemcitabine (Gem) was loaded into the MBPF, and its loading and releasing efficacy were calculated to be 17.5 wt% and 64.5 ± 3%, respectively. Moreover, the photothermal conversion efficiency (PCE) of MBPF was estimated to be 35.3%, and it also showed better biocompatibility, which was determined by an MTT assay. The MBPF significantly increased the ambient temperature to 56.3 °C and triggered Gem release inside the TNBC cells when exposed to a near-infrared (NIR) laser (808 nm, 1.5 W cm-2, 5 min). Notably, the MoS2@BT-based nanosystem was used as a photothermal agent and a therapeutic drug-loading container for combating TNBC cells. Benefiting from the combined therapy, MBPF reduced TNBC cell viability to 81.3% due to its efficient synergistic effects. Thus, the proposed tumour-targeting MoS2@BT CSNP exhibits high drug loading, better biocompatibility, and improved anticancer efficacy toward TNBC cells due to its dual therapeutic approach in a single system, which opens up a new approach for dual cancer therapy.

Development of an interpretable machine learning model associated with heavy metals' exposure to identify coronary heart disease among US adults via SHAP: Findings of the US NHANES from 2003 to 2018.

Limited information is available on the links between heavy metals' exposure and coronary heart disease (CHD). We aim to establish an efficient and explainable machine learning (ML) model that associates heavy metals' exposure with CHD identification. Our datasets for investigating the associations between heavy metals and CHD were sourced from the US National Health and Nutrition Examination Survey (US NHANES, 2003-2018). Five ML models were established to identify CHD by heavy metals' exposure. Further, 11 discrimination characteristics were used to test the strength of the models. The optimally performing model was selected for identification. Finally, the SHapley Additive exPlanations (SHAP) tool was used for interpreting the features to visualize the selected model's decision-making capacity. In total, 12,554 participants were eligible for this study. The best performing random forest classifier (RF) based on 13 heavy metals to identify CHD was chosen (AUC: 0.827; 95%CI: 0.777-0.877; accuracy: 95.9%). SHAP values indicated that cesium (1.62), thallium (1.17), antimony (1.63), dimethylarsonic acid (0.91), barium (0.76), arsenous acid (0.79), total arsenic (0.01) in urine, and lead (3.58) and cadmium (4.66) in blood positively contributed to the model, while cobalt (-0.15), cadmium (-2.93), and uranium (-0.13) in urine negatively contributed to the model. The RF model was efficient, accurate, and robust in identifying an association between heavy metals' exposure and CHD among US NHANES 2003-2018 participants. Cesium, thallium, antimony, dimethylarsonic acid, barium, arsenous acid, and total arsenic in urine, and lead and cadmium in blood show positive relationships with CHD, while cobalt, cadmium, and uranium in urine show negative relationships with CHD.

Review on treatment and utilization of barium slag in China.

Barium slag (BS) is generated as a by-product waste during the production of barium salts from barite. A large amount of BS is discharged annually threating the ecological environment and restricting the development of the barium salts industry. In China, BS is classified as hazardous waste due to its corrosivity, and more importantly because of its extraction toxicity of barium. Soluble barium is toxic and can result in barium poisoning for environment and human beings. The current review presents a detailed summary on general characteristics, discharge and disposal status, harmless treatment pathways and comprehensive utilization of BS in China. BaO, SiO2, CaO, and SO3 occur as main chemical compositions in BS, especially BaO accounting approximately for 35-40%. The mineral compositions include unreacted barite, quartz, clay minerals, newly-formed phases from the side reactions such as BaCO3, BaSiO3 and BaSO3, and residual carbon. A special attention is given to the assessment of the harmless treatment methods for BS from hazardous waste to general waste, which will decrease its management costs. Precipitation and solidification of soluble barium is the common pathway for harmless treatment of BS, and the using of other industrial waste can realize cost-saving. Methods for comprehensive utilization of BS include recovery of barium and carbon, application in building materials, and using as adsorbents for wastewater treatment. In particular, we analyzed and discussed the advantages and disadvantages of these existing process routes, intending to promote potentials for comprehensive utilization of BS in the future.

Assessing gestational exposure to trace elements in an area of unconventional oil and gas activity: comparison with reference populations and evaluation of variability.

BACKGROUND: Located in Northeastern British Columbia, the Montney formation is an important area of unconventional oil and gas exploitation, which can release contaminants like trace elements. Gestational exposure to these contaminants may lead to deleterious developmental effects. OBJECTIVES: Our study aimed to (1) assess gestational exposure to trace elements in women living in this region through repeated urinary measurements; (2) compare urinary concentrations to those from North American reference populations; (3) compare urinary concentrations between Indigenous and non-Indigenous participants; and (4) evaluate inter- and intra-individual variability in urinary levels. METHODS: Eighty-five pregnant women participating in the Exposures in the Peace River Valley (EXPERIVA) study provided daily spot urine samples over 7 consecutive days. Samples were analyzed for 20 trace elements using inductively-coupled mass spectrometry (ICP-MS). Descriptive statistics were calculated, and inter- and intra-individual variability in urinary levels was evaluated through intraclass correlation coefficient (ICC) calculation for each trace element. RESULTS: When compared with those from North American reference populations, median urinary levels were higher in our population for barium (~2 times), cobalt (~3 times) and strontium (~2 times). The 95th percentile of reference populations was exceeded at least 1 time by a substantial percentage of participants during the sampling week for barium (58%), cobalt (73%), copper (29%), manganese (28%), selenium (38%), strontium (60%) and vanadium (100%). We observed higher urinary manganese concentrations in self-identified Indigenous participants (median: 0.19 µg/g creatinine) compared to non-Indigenous participants (median: 0.15 µg/g of creatinine). ICCs varied from 0.288 to 0.722, indicating poor to moderate reliability depending on the trace element. SIGNIFICANCE: Our results suggest that pregnant women living in this region may be more exposed to certain trace elements (barium, cobalt, copper, manganese, selenium, strontium, and vanadium), and that one urine spot sample could be insufficient to adequately characterize participants' exposure to certain trace elements. IMPACT STATEMENT: Unconventional oil and gas (UOG) is an important industry in the Peace River Valley region (Northeastern British Columbia, Canada). Information on the impacts of this industry is limited, but recent literature emphasizes the risk of environmental contamination. The results presented in this paper highlight that pregnant women living near UOG wells in Northeastern British Columbia may be more exposed to some trace elements known to be related to this industry compared to reference populations. Furthermore, our results based on repeated urinary measurements show that one urine sample may be insufficient to adequately reflect long-term exposure to certain trace elements.

Mixture Toxicity of Three Unconventional Gas Fracking Chemicals, Barium, O-Cresol, and Sodium Chloride, to the Freshwater Shrimp Paratya australiensis.

The 96-h acute toxicity of barium (Ba2+ ), o-cresol, and sodium chloride (NaCl) to Paratya australiensis was assessed in single, binary, and ternary combinations in addition to three biochemical assays: glutathione S-transferase, acetylcholinesterase, and sodium-potassium adenosine triphosphatase. The 96-h lethal concentrations that expressed 50% mortality (LC50) in the single-toxicant exposures were Ba2+ = 23.4 mg/L, o-cresol = 12.2 mg/L, and NaCl = 4198 mg/L. Mortality from o-cresol exposure occurred between 11 and 22 mg/L, whereas Ba2+ was more gradual across 10-105 mg/L, and most of the NaCl mortality occurred between 2050 and 4100 mg/L. Toxic units were used to assess the binary and ternary interactions of the toxicants. A more than additive effect was observed for most combinations in the binary chemical exposures, with the ternary combinations yielding highly synergistic interactions. Greater synergism was observed with the 96-h LC50 of o-cresol in combination with the three concentrations of NaCl (1025, 2050, and 3075 mg/L) compared with Ba2+ , with toxic units of 0.38, 0.48, and 0.10 (o-cresol) and 0.71, 0.67, and 0.50 (Ba2+ ). No notable enzyme activity trends were observed in the enzyme biomarker responses from both individual and mixture exposures. Although acute single-species toxicity tests tend to underestimate the effects of Ba2+ , o-cresol, and NaCl on populations, communities, and ecosystems in seminatural (e.g., mesocosms) and natural systems, there are currently no published acute toxicity data available for P. australiensis and the three toxicants used in the present study. The present study shows that chemicals with different toxicity mechanisms can potentially lead to more synergistic responses. Environ Toxicol Chem 2023;42:481-494. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Association of single and joint metals with albuminuria and estimated glomerular filtration longitudinal change in middle-aged adults from Spain: The Aragon workers health study.

The nephrotoxicity of low-chronic metal exposures is unclear, especially considering several metals simultaneously. We assessed the individual and joint association of metals with longitudinal change in renal endpoints in Aragon Workers Health Study participants with available measures of essential (cobalt [Co], copper [Cu], molybdenum [Mo] and zinc [Zn]) and non-essential (As, barium [Ba], Cd, chromium [Cr], antimony [Sb], titanium [Ti], uranium [U], vanadium [V] and tungsten [W]) urine metals and albumin-to-creatinine ratio (ACR) (N = 707) and estimated glomerular filtration rate (eGFR) (N = 1493) change. Median levels were 0.24, 7.0, 18.6, 295, 3.1, 1.9, 0.28, 1.16, 9.7, 0.66, 0.22 µg/g for Co, Cu, Mo, Zn, As, Ba, Cd, Cr, Sb, Ti, V and W, respectively, and 52.5 and 27.2 ng/g for Sb and U, respectively. In single metal analysis, higher As, Cr and W concentrations were associated with increasing ACR annual change. Higher Zn, As and Cr concentrations were associated with decreasing eGFR annual change. The shape of the longitudinal dose-responses, however, was compatible with a nephrotoxic role for all metals, both in ACR and eGFR models. In joint metal analysis, both higher mixtures of Cu-Zn-As-Ba-Ti-U-V-W and Co-Cd-Cr-Sb-V-W showed associations with increasing ACR and decreasing eGFR annual change. As and Cr were main drivers of the ACR change joint metal association. For the eGFR change joint metal association, while Zn and Cr were main drivers, other metals also contributed substantially. We identified potential interactions for As, Zn and W by other metals with ACR change, but not with eGFR change. Our findings support that Zn, As, Cr and W and suggestively other metals, are nephrotoxic at relatively low exposure levels. Metal exposure reduction and mitigation interventions may improve prevention and decrease the burden of renal disease in the population.

Novel metallomic profiling and non-carcinogenic risk assessment of botanical ingredients for use in herbal, phytopharmaceutical and dietary products using HR-ICP-SFMS.

Knowledge of element concentrations in botanical extracts is relevant to assure consumer protection given the increased interest in plant-based ingredients. This study demonstrates successful multi-element investigations in order to address the lack of comprehensive profiling data for botanical extracts, while reporting for the first time the metallomic profile(s) of arnica, bush vetch, sweet cicely, yellow rattle, bogbean, rock-tea and tufted catchfly. Key element compositions were quantified using a validated HR-ICP-SFMS method (µg kg-1) and were found highly variable between the different plants: Lithium (18-3964); Beryllium (3-121); Molybdenum (75-4505); Cadmium (5-325); Tin (6-165); Barium (747-4646); Platinum (2-33); Mercury (5-30); Thallium (3-91); Lead (12-4248); Bismuth (2-30); Titanium (131-5827); Vanadium (15-1758); Chromium (100-4534); Cobalt (21-652); Nickel (230-6060) and Copper (1910-6340). Compendial permissible limits were not exceeded. Overall, no evidence of a health risk to consumers could be determined from consumption of the investigated plants at reasonable intake rates. Mathematical risk modelling (EDI, CDI, HQ, HI) estimated levels above safe oral thresholds only for Cd (16%) and Pb (8%) from higher intakes of the respective plant-derived material. Following high consumption of certain plants, 42% of the samples were categorised as potentially unsafe due to cumulative exposure to Cu, Cd, Hg and Pb. PCA suggested a potential influence of post-harvest processing on Cr, Ti and V levels in commercially-acquired plant material compared to wild-collected and farm-grown plants. Moreover, a strong correlation was observed between Pb-Bi, Be-V, Bi-Sn, and Tl-Mo occurrence. This study may support future research by providing both robust methodology and accompanying reference profile(s) suitable for the quality evaluation of essential elements and/or metal contaminants in botanical ingredients.

Relationships between urinary metals concentrations and cognitive performance among U.S. older people in NHANES 2011-2014.

Background: Epidemiological evidence on Urine metals and cognitive impairment in older individuals is sparse and limited. The goal of this study was to analyze if there was a link between urinary metal levels and cognitive performance in U.S. people aged 60 and up. Methods: The National Health and Nutrition Examination Survey (NHANES) data from 2011 to 2014 were utilized in this cross-sectional analysis. Memory function was quantified using the following methods: Established Consortium for Word Learning in Alzheimer's Disease (CERAD-WL) (immediate learning and recall and delayed recall), Animal Fluency Test (AFT), and Digit Symbol Substitution Test (DSST). An inductively coupled plasma mass spectrometry (ICP-MS) was used to estimate urine metal concentrations. The connection of Urine metals level with cognitive function was investigated employing binary logistic regression and restricted cubic spline models. Results: A total of 840 participants aged 60 years and over were enrolled in this study. After controlling for confounders, the association between cadmium, barium, cobalt, cesium, manganese, and thallium and poor cognitive performance showed significance in multiple logistic regression compared to the lowest quartile of metals. In the DSST test, the weighted multivariate adjusted ORs (95% CI) for cadmium in the highest quartile, barium and cesium in the third quartile were 2.444 (1.310-4.560), 0.412 (0.180-0.942) and 0.440 (0.198-0.979), respectively. There were L-shaped associations between urine cesium, barium, or manganese and low cognitive performance in DSST. Urine lead, molybdenum and uranium did not show any significant relationships with cognitive impairment, respectively, compared to the respective lowest quartile concentrations. Conclusion: The levels of barium (Ba), cobalt (Co), cesium (Cs), manganese (Mn), and thallium (Tl) in urine were found to be negatively related to the prevalence of impaired cognitive performance in our cross-sectional investigation. Higher cadmium (Cd) levels were associated with cognitive impairment.

Second harmonic generation nanoparticles enables Near-Infrared Photodynamic Therapy from visible light reactive photosensitizer conjugates.

Combination of photosensitizers (PS) with nanotechnology can improve the therapeutic efficiency of clinical Photodynamic Therapy (PDT) by converting visible light reactive PSs into Near-Infrared (NIR) light responsive molecules using Harmonic Nanoparticles (HNP). To test the PDT efficiency of HNP-PS conjugates, pathogenic S. aureus cell cultures were treated with perovskite (Barium Titanate) Second Harmonic Generation (SHG) nanoparticles conjugated to photosensitizers (PS) (we compared both FDA approved Protoporphyrin IX and Curcumin) and subjected to a femtosecond pulsed Near-Infrared (NIR) laser (800 nm, 232-228 mW, 12-15 fs pulse width at repetition rate of 76.9 MHz) for 10 minutes each. NIR PDT using Barium Titanate (BT) conjugated with Protoporphyrin IX as HNP-PS conjugate reduced the viability of S. aureus cells by 77.3 ± 9.7% while BT conjugated with Curcumin did not elicit any significant effect. Conventional PSs reactive only to visible spectrum light coupled with SHG nanoparticles enables the use of higher tissue penetrating NIR light to generate an efficient photodynamic effect, thereby overcoming low light penetration and tissue specificity of conventional visible light PDT treatments.