An Immunocompetent Microphysiological System to Simultaneously Investigate Effects of Anti-Tumor Natural Killer Cells on Tumor and Cardiac Microtissues.

Existing first-line cancer therapies often fail to cope with the heterogeneity and complexity of cancers, so that new therapeutic approaches are urgently needed. Among novel alternative therapies, adoptive cell therapy (ACT) has emerged as a promising cancer treatment in recent years. The limited clinical applications of ACT, despite its advantages over standard-of-care therapies, can be attributed to (i) time-consuming and cost-intensive procedures to screen for potent anti-tumor immune cells and the corresponding targets, (ii) difficulties to translate in-vitro and animal-derived in-vivo efficacies to clinical efficacy in humans, and (iii) the lack of systemic methods for the safety assessment of ACT. Suitable experimental models and testing platforms have the potential to accelerate the development of ACT. Immunocompetent microphysiological systems (iMPS) are microfluidic platforms that enable complex interactions of advanced tissue models with different immune cell types, bridging the gap between in-vitro and in-vivo studies. Here, we present a proof-of-concept iMPS that supports a triple culture of three-dimensional (3D) colorectal tumor microtissues, 3D cardiac microtissues, and human-derived natural killer (NK) cells in the same microfluidic network. Different aspects of tumor-NK cell interactions were characterized using this iMPS including: (i) direct interaction and NK cell-mediated tumor killing, (ii) the development of an inflammatory milieu through enrichment of soluble pro-inflammatory chemokines and cytokines, and (iii) secondary effects on healthy cardiac microtissues. We found a specific NK cell-mediated tumor-killing activity and elevated levels of tumor- and NK cell-derived chemokines and cytokines, indicating crosstalk and development of an inflammatory milieu. While viability and morphological integrity of cardiac microtissues remained mostly unaffected, we were able to detect alterations in their beating behavior, which shows the potential of iMPS for both, efficacy and early safety testing of new candidate ACTs.

A Facile Strategy for Immobilizing GOD and HRP onto Pollen Grain and Its Application to Visual Detection of Glucose.

Pollen grain was explored as a new carrier for enzyme immobilization. After being modified with boric acid-functionalized titania, the pollen grain was able to covalently immobilize glycosylated enzymes by boronate affinity interaction under very mild experimental conditions (e.g., pH 7.0, ambient temperature and free of organic solvent). The glucose oxidase and horse radish peroxidase-immobilized pollen grain became a bienzyme system. The pollen grain also worked as an indicator of the cascade reaction by changing its color. A rapid, simple and cost-effective approach for the visual detection of glucose was then developed. When the glucose concentration exceeded 0.5 mM, the color change was observable by the naked eye. The assay of glucose in body fluid samples exhibited its great potential for practical application.

Cross-company evaluation of the human lymphocyte activation assay.

Nonclinical immunotoxicity evaluation is an important component of safety assessment for pharmaceuticals. One in vitro assay that can be applied in a weight of evidence assessment is the human lymphocyte activation (HuLA) assay, an antigen recall assay, similar in many respects to the in vivo T-cell-dependent antibody response (TDAR) in that cooperation of multiple immune cell types are needed to produce responses. This assay uses human cells and is more amenable than the TDAR to compound ranking and mechanistic studies. The HuLA assay requires less time and drug than TDAR assays, uses a relevant antigen (influenza), reflects a human immune response, and applies principles of the 3Rs to non-clinical safety assessment. Peripheral blood mononuclear cells (PBMC) from flu-immunized donors are re-stimulated with flu-vaccine in the presence of test articles, and proliferation is measured. Published data demonstrate the applicability of the HuLA assay, but it has not been evaluated for reproducibility across testing sites. To evaluate assay reproducibility, scientists from a consortium of institutions conducted the assay in parallel, using a common pool of donor PBMC, influenza vaccine, and known immunosuppressant compounds (cyclosporine A and mycophenolic acid). The HuLA assay was highly reproducible in identification of inhibition of antigen-specific responses, and there was significant agreement across testing sites in the half maximal inhibitory concentration (IC50) values. Intra-site variability was the largest contributor to the variability observed within the assay. The HuLA assay was demonstrated to be ideally suited to comparing multiple compounds (i.e. compound ranking or benchmarking) within the same assay. Overall, the data reported herein support the HuLA assay as a useful tool in mechanistic evaluations of antigen-specific immune responses.

Do We have a Satisfactory Cell Viability Assay? Review of the Currently Commercially-Available Assays.

Cell-based assays are an important part of the drug discovery process and clinical research. One of the main hurdles is to design sufficiently robust assays with adequate signal to noise parameters while maintaining the inherent physiology of the cells and not interfering with the pharmacology of target being investigated. A plethora of assays that assess cell viability (or cell heath in general) are commercially available and can be classified under different categories according to their concepts and principle of reactions. The assays are valuable tools, however, suffer from a large number of limitations. Some of these limitations can be procedural or operational, but others can be critical as those related to a poor concept or the lack of proof of concept of an assay, e.g. those relying on differential permeability of dyes in-and-out of viable versus compromised cell membranes. While the assays can differentiate between dead and live cells, most, if not all, of them can just assess the relative performance of cells rather than providing a clear distinction between healthy and dying cells. The possible impact of relatively high molecular weight dyes, used in most of the assay, on cell viability has not been addressed. More innovative assays are needed, and until better alternatives are developed, setup of current cell-based studies and data interpretation should be made with the limitations in mind. Negative and positive control should be considered whenever feasible. Also, researchers should use more than one orthogonal method for better assessment of cell health.

The Calvarial Injection Assay.

This chapter describes the calvarial injection method, whereby the effect of a substance on bone is tested by subcutaneous injection over the calvarium of a mouse. This assay allows testing of the effect of substances on both bone resorption and bone formation in a relatively simple in vivo model. The analysis is carried out by histological means, usually in glycolmethacrylate-embedded tissue, allowing for histochemical analysis and for a variety of different histological staining methods which are also described in detail.

Development of Bispecific Antibody Derivatives for Cancer Immunotherapy.

Development of antibody-based immunotherapeutics has progressed from direct tumor-targeting, with antibodies such as rituximab, to blocking of immune checkpoints to reactivate antitumor immunity. In addition, bispecific antibodies/antibody fragments are also of great interest in cancer therapy, as these constructs have the ability to redirect immune effector cells to cancer targets and, thereby, enhance therapeutic efficacy. A number of bispecific antibody formats have been reported, with the first FDA-approved bispecific antibody being blinatumomab, a so-called bispecific T cell engager (BiTE), which redirects and potently activates T cell immune responses. Recently, we described an additional novel bispecific antibody derivative, termed RTX-CD47, which was designed to inhibit the innate immune checkpoint CD47-SIRPα only on -positive cancer cells. RTX-CD47 contains two antibody fragments in tandem and has monovalent binding specificity for CD47 and . Only upon dual binding to and CD47 RTX-CD47 blocks CD47 "Don't eat me" signaling. Here, we provide a detailed protocol for the construction and functional evaluation of such a bispecific antibody derivative.

3D Printing: The Second Dawn of Lab-On-Valve Fluidic Platforms for Automatic (Bio)Chemical Assays.

In this work, inexpensive manufacturing of unibody transparent mesofluidic platforms for pressure-driven Lab-On-a-Valve (LOV) methodologies is accomplished via rapid one-step 3D prototyping from digital models by user-friendly freeware. Multichannel architecture having 800-1800 µm cross-sectional features with unconventional 3D conduit structures and integrating optical and electrochemical detection facilities is for the first time reported. User-defined flow-programming capitalizing upon software control for automatic liquid handling is synergistically combined with additive manufacturing based on stereolithographic 3D printing so as to launch the so-called fourth generation of microflow analysis (3D-µFIA). Using an affordable consumer-grade 3D printer dedicated LOV platforms are 3D printed at will and prints are characterized in terms of solvent compatibility, optical and mechanical properties, and sorption of inorganic and organic species to prospect potentialities for the unfettered choice of chemistries. The unique versatility of the 3D-printed LOV device that is attached to a multiposition rotary valve as a central design unit is demonstrated by (i) online handling of biological materials followed by on-chip photometric detection, (ii) flow-through bioaccessibility tests in exposome studies of contaminated soils with miniaturized voltammetric detection, (iii) online phospholipid removal by TiO2-incorporated microextraction approaches using on-chip disposable sorbents, and (iv) automatic dynamic permeation tests mimicking transdermal measurements in Franz-cell configurations. A multipurpose LOV fluidic platform can be fabricated for less than 11 Euros.

Acetylcholinesterase-inhibitory activity of Iranian plants: Combined HPLC/bioassay-guided fractionation, molecular networking and docking strategies for the dereplication of active compounds.

In order to search for discovery of acetylcholinesterase (AChE) inhibitors, as a therapeutic strategy for treatment of the Alzheimer's disease, twenty-five Iranian plants have been evaluated by an in vitro enzymatic Ellman method and molecular docking study. Each plant was successively extracted by n-hexane, ethyl acetate and methanol to obtain a total of 75 extracts. The inhibiting effect of extracts was measured by a colorimetric assay in 96-well microplates. The n-hexane extract of Prangos ferulacea showed the highest AChE inhibitory activity with 75.6% inhibition at a concentration of 50 µg/mL. The chemical composition of this extract was investigated in detail based on a combination of HPLC/bioassay-guided fractionation and molecular networking techniques. The results led to the identification of seventeen compounds, one of them was a fatty acid derivative, two compounds had flavonoid structure and others were furanocoumarin type compounds. In vitro analysis showed that the subfraction F10f was the most potent inhibitor against the activity of AChE with an IC50 value of 25.2 µg/mL and good docking scores of its constituents confirming its high activity.

Endogenous Locus Reporter Assays.

Reporter gene assays are widely used in high-throughput screening (HTS) to identify compounds that modulate gene expression. Traditionally a reporter gene assay is built by cloning an endogenous promoter sequence or synthetic response elements in the regulatory region of a reporter gene to monitor transcriptional activity of a specific biological process (exogenous reporter assay). In contrast, an endogenous locus reporter has a reporter gene inserted in the endogenous gene locus that allows the reporter gene to be expressed under the control of the same regulatory elements as the endogenous gene, thus more accurately reflecting the changes seen in the regulation of the actual gene. In this chapter, we introduce some of the considerations behind building a reporter gene assay for high-throughput compound screening and describe the methods we have utilized to establish 1536-well format endogenous locus reporter and exogenous reporter assays for the screening of compounds that modulate Myc pathway activity.

Measuring drug absorption improves interpretation of behavioral responses in a larval zebrafish locomotor assay for predicting seizure liability.

INTRODUCTION: Unanticipated effects on the central nervous system are a concern during new drug development. A larval zebrafish locomotor assay can reveal seizure liability of experimental molecules before testing in mammals. Relative absorption of compounds by larvae is lacking in prior reports of such assays; having those data may be valuable for interpreting seizure liability assay performance. METHODS: Twenty-eight reference drugs were tested at multiple dose levels in fish water and analyzed by a blinded investigator. Responses of larval zebrafish were quantified during a 30min dosing period. Predictive metrics were calculated by comparing fish activity to mammalian seizure liability for each drug. Drug level analysis was performed to calculate concentrations in dose solutions and larvae. Fifteen drug candidates with neuronal targets, some having preclinical convulsion findings in mammals, were tested similarly. RESULTS: The assay has good predictive value of established mammalian responses for reference drugs. Analysis of drug absorption by larval fish revealed a positive correlation between hyperactive behavior and pro-convulsive drug absorption. False negative results were associated with significantly lower compound absorption compared to true negative, or true positive results. The predictive value for preclinical toxicology findings was inferior to that suggested by reference drugs. DISCUSSION: Disproportionately low exposures in larvae giving false negative results demonstrate that drug exposure analysis can help interpret results. Due to the rigorous testing commonly performed in preclinical toxicology, predicting convulsions in those studies may be more difficult than predicting effects from marketed drugs.

In vitro gene expression-coupled bacterial cell chip for screening species-specific antimicrobial enzymes.

Targeting infectious bacterial pathogens is important for reducing the evolution of antibiotic-resistant bacteria and preserving the endogenous human microbiome. Cell lytic enzymes including bacteriophage endolysins, bacterial autolysins, and other bacteriolysins are useful antibiotic alternatives due to their exceptional target selectivity, which may be used to lysins rapidly kill target bacteria and their high specificity permit the normal commensal microflora to be left undisturbed. Genetic information of numerous lysins is currently available, but the identification of their antimicrobial function and specificity has been limited because most lysins are often poorly expressed and exhibit low solubilities. Here, we report the development of bacterial cell chip for rapidly accessing the function of diverse genes that are suggestive of encoding lysins. This approach can be used to evaluate rapidly the species-specific antimicrobial activity of diverse lysins synthesized from in vitro transcription and translation (TNT) of plasmid DNA. In addition, new potent lysins can be assessed that are not expressed in hosts and display low solubility. As a result of evaluating the species-specific antimicrobial function of 11 (un)known lysins with an in vitro TNT-coupled bacterial cell chip, a potent recombinant lysin against Staphylococcus strains, SA1, was identified. The SA1 was highly potent against not only S. aureus, but also both lysostaphin-resistant S. simulans and S. epidermidis cells. To this end, the SA1 may be applicable to treat both methicillin-resistant S. aureus (MRSA) and lysostaphin-resistant MRSA mutants. Biotechnol. Bioeng. 2017;114: 1648-1657. © 2017 Wiley Periodicals, Inc.

Whole-cell Escherichia coli lactate biosensor for monitoring mammalian cell cultures during biopharmaceutical production.

Many high-value added recombinant proteins, such as therapeutic glycoproteins, are produced using mammalian cell cultures. In order to optimize the productivity of these cultures it is important to monitor cellular metabolism, for example the utilization of nutrients and the accumulation of metabolic waste products. One metabolic waste product of interest is lactic acid (lactate), overaccumulation of which can decrease cellular growth and protein production. Current methods for the detection of lactate are limited in terms of cost, sensitivity, and robustness. Therefore, we developed a whole-cell Escherichia coli lactate biosensor based on the lldPRD operon and successfully used it to monitor lactate concentration in mammalian cell cultures. Using real samples and analytical validation we demonstrate that our biosensor can be used for absolute quantification of metabolites in complex samples with high accuracy, sensitivity, and robustness. Importantly, our whole-cell biosensor was able to detect lactate at concentrations more than two orders of magnitude lower than the industry standard method, making it useful for monitoring lactate concentrations in early phase culture. Given the importance of lactate in a variety of both industrial and clinical contexts we anticipate that our whole-cell biosensor can be used to address a range of interesting biological questions. It also serves as a blueprint for how to capitalize on the wealth of genetic operons for metabolite sensing available in nature for the development of other whole-cell biosensors. Biotechnol. Bioeng. 2017;114: 1290-1300. © 2017 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals, Inc.

A microfluidic dual gradient generator for conducting cell-based drug combination assays.

We present a microfluidic chip that generates linear concentration gradients of multiple solutes that are orthogonally-aligned to each other. The kinetics of gradient formation was characterized using a fluorescent tracer matching the molecular weight of small inhibitory drugs. Live-cell signalling and motility experiments were conducted to demonstrate the potential uses and advantages of the device. A431 epidermoid carcinoma cells, where EGF induces apoptosis in a concentration-dependent manner, were simultaneously exposed to gradients of MEK inhibitor and EGF receptor (EGFR) inhibitor. By monitoring live caspase activation in the entire chip, we were able to quickly assess the combinatorial interaction between MEK and EGFR pathways, which otherwise would require costly and time consuming titration experiments. We also characterized the motility and morphology of MDA-MB-231 breast cancer cells exposed to orthogonal gradients of EGF and EGFR inhibitor. The microfluidic chip not only permitted the quantitative analysis of a population of cells exposed to drug combinations, but also enabled the morphological characterization of individual cells. In summary, our microfluidic device, capable of establishing concentration gradients of multiple compounds over a group of cells, facilitates and accelerates in vitro cell biology experiments, such as those required for cell-based drug combination assays.

An optofluidic constriction chip for monitoring metastatic potential and drug response of cancer cells.

Cellular mechanical properties constitute good markers to characterize tumor cells, to study cell population heterogeneity and to highlight the effect of drug treatments. In this work, we describe the fabrication and validation of an integrated optofluidic chip capable of analyzing cellular deformability on the basis of the pressure gradient needed to push a cell through a narrow constriction. We demonstrate the ability of the chip to discriminate between tumorigenic and metastatic breast cancer cells (MCF7 and MDA-MB231) and between human melanoma cells with different metastatic potential (A375P and A375MC2). Moreover, we show that this chip allows highlighting the effect of drugs interfering with microtubule organization (paclitaxel, combretastatin A-4 and nocodazole) on cancer cells, which leads to changes in the pressure-gradient required to push cells through the constriction. Our single-cell microfluidic device for mechanical evaluation is compact and easy to use, allowing for an extensive use in different laboratory environments.

Development and validation of semiautomated 96-well transport assay using LLC-PK1 cells transfected with human P-glycoprotein for high-throughput screening.

Transport assays using P-gp-expressing cell lines are commonly used to identify P-gp substrates and inhibitors in drug discovery. The P-gp cell-based assay is performed manually in 12- or 24-well plates and requires improvement for high-throughput screening. In this study, we established an efficient semiautomated 96-well transport assay using LLC-PK1 cells transfected with human P-gp. The protocol was optimized with a microplate washer for exchanging media and buffer to enhance throughput. P-gp substrates and inhibitors, and the paracellular marker Dextran Texas Red® were used to validate the 96-well transport assay. Cell monolayer integrity after washing by a microplate washer was confirmed by measuring paracellular permeability of Dextran Texas Red. Permeability and net flux ratio of the P-gp substrates and the inhibitory potency of the P-gp inhibitors were comparable in 24- and 96-well plates. The regression value of net flux ratio of P-gp substrates was high between the two formats (r²=0.99). The optimized 96-well transport assay using the microplate washer was found to be an efficient high-throughput screening tool that provided the same quality data as the 24-well plate for the identification of P-gp substrates and inhibitors in drug discovery.

Human iPSC-based cardiac microphysiological system for drug screening applications.

Drug discovery and development are hampered by high failure rates attributed to the reliance on non-human animal models employed during safety and efficacy testing. A fundamental problem in this inefficient process is that non-human animal models cannot adequately represent human biology. Thus, there is an urgent need for high-content in vitro systems that can better predict drug-induced toxicity. Systems that predict cardiotoxicity are of uppermost significance, as approximately one third of safety-based pharmaceutical withdrawals are due to cardiotoxicty. Here, we present a cardiac microphysiological system (MPS) with the attributes required for an ideal in vitro system to predict cardiotoxicity: i) cells with a human genetic background; ii) physiologically relevant tissue structure (e.g. aligned cells); iii) computationally predictable perfusion mimicking human vasculature; and, iv) multiple modes of analysis (e.g. biological, electrophysiological, and physiological). Our MPS is able to keep human induced pluripotent stem cell derived cardiac tissue viable and functional over multiple weeks. Pharmacological studies using the cardiac MPS show half maximal inhibitory/effective concentration values (IC50/EC50) that are more consistent with the data on tissue scale references compared to cellular scale studies. We anticipate the widespread adoption of MPSs for drug screening and disease modeling.

Adapting high-throughput screening methods and assays for biocontainment laboratories.

High-throughput screening (HTS) has been integrated into the drug discovery process, and multiple assay formats have been widely used in many different disease areas but with limited focus on infectious agents. In recent years, there has been an increase in the number of HTS campaigns using infectious wild-type pathogens rather than surrogates or biochemical pathogen-derived targets. Concurrently, enhanced emerging pathogen surveillance and increased human mobility have resulted in an increase in the emergence and dissemination of infectious human pathogens with serious public health, economic, and social implications at global levels. Adapting the HTS drug discovery process to biocontainment laboratories to develop new drugs for these previously uncharacterized and highly pathogenic agents is now feasible, but HTS at higher biosafety levels (BSL) presents a number of unique challenges. HTS has been conducted with multiple bacterial and viral pathogens at both BSL-2 and BSL-3, and pilot screens have recently been extended to BSL-4 environments for both Nipah and Ebola viruses. These recent successful efforts demonstrate that HTS can be safely conducted at the highest levels of biological containment. This review outlines the specific issues that must be considered in the execution of an HTS drug discovery program for high-containment pathogens. We present an overview of the requirements for HTS in high-level biocontainment laboratories.

The Discovery Channel: microfluidics and microengineered systems in drug screening.

Approaches to drug development have changed significantly over the last decade in response to the continued decline in productivity of the current discovery model. Here, we highlight exciting findings and promising approaches in the recent literature in which researchers integrate advanced micro-engineering, design, and analytical strategies to improve the relevance and utility of high-throughput screening in the drug discovery pipeline.

Advances in laser scanning imaging cytometry for high-content screening.

The advent of high-content screening more than a decade ago remodeled drug discovery workflows by recasting the role of cell-based approaches in target identification, primary screening, lead optimization, and toxicity. The ability to identify and quantify compound effects on multiple cellular functions allows for rapid characterization of chemical libraries. Laser scanning imaging cytometry (LSIC) is one of the technologies that is being applied to a broad range of assays utilizing fluorescent labeling, at throughputs compatible with primary screening campaigns. Cellular resolution is achieved using laser scanning excitation through a specialized F-theta scan lens. This configuration results in rapid whole well scanning and large depth of field. The recent availability of systems equipped with multiple sources of laser excitation and arrays of detectors for spectral analysis has significantly increased its applicability through enabling more fluorescent reagents and higher levels of multiplexing. LSIC is being used most extensively for phenotypic screening especially in areas such as cell health, RNA interference (RNAi) screening, and three-dimensional cell models. This review communicates advances in LSIC and how it is being applied by presenting an overview of the technology and a range of real-world case studies.

[Evaluation of Basic Performance of "Point Strip ferritin-3000" for Simple and Rapid Quantification of Serum Ferritin].

Serum ferritin is an excellent marker for total iron content in the body and is essential for the diagnosis of iron deficiency or iron overload. Recently, a simple and rapid method, which utilizes immunochromatography for the quantification of serum ferritin, was developed. However, the range of measurement in previous reagents was limited (10-500 ng/mL). This range is rather narrow and is not fully helpful for the diagnosis of iron overload which sometimes occurs as a result of prolonged transfusions, or for monitoring iron contents during iron chelation therapy against iron overload. In the present study we evaluated the basic performance of the newly developed "Point Strip ferritin-3000", which can measure serum ferritin in the range of 300-3,000 ng/mL. Coefficient of variation (CV) s of within and inter-day assays were in the ranges of 7.3-11.1% and 2.1-5.2%, respectively. Using 87 serum samples obtained from the patients with written informed consents, the correlation coefficient was calculated to be 0.93 compared to the control method. In addition, the quantification of serum ferritin by "Point Strip ferritin-3000" was not influenced by bilirubin, hemoglobin, chyle, rheumatoid factor, or ascorbic acid. From our data, "Point Strip ferritin-3000" is reliable reagent in the range of 300-3,000 ng/mL, and is therefore considered to be useful for the diagnosis of iron overload, as well as for monitoring iron contents during iron chelation therapy. In addition, this quantification method can be easily performed using a small desktop equipment without any special technique, making this system applicable for epidemiological surveys and clinical studies.