The effect of different antibiotic combinations in calcium sulfate cement on the growth of Cutibacterium acnes and Staphylococcus periprosthetic shoulder infection isolates.

BACKGROUND: Periprosthetic joint infections (PJI) of the shoulder are a devastating complication of shoulder arthroplasty and are commonly caused by Staphylococcus and Cutibacterium acnes. Absorbable calcium sulfate (CS) beads are sometimes used for delivering antibiotics in PJI. This study evaluates the in vitro effect of different combinations of gentamicin, vancomycin, and ertapenem in beads made from CS cement on the growth of C acnes and coagulase-negative Staphylococcus (CNS) strains. METHODS: Three strains of C acnes and 5 strains of CNS from clinically proven shoulder PJI were cultured and plated with CS beads containing combinations of vancomycin, gentamicin, and ertapenem. Plates with C acnes were incubated anaerobically while plates with Staphylococcus were incubated aerobically at 37 °C. Zones of inhibition were measured at intervals of 3 and 7 days using a modified Kirby Bauer technique, and beads were moved to plates containing freshly streaked bacteria every seventh day. This process was run in triplicate over the course of 56 days. Statistical analysis was conducted using SPSS v. 28 with repeated measures analysis of variance (ANOVA) and pairwise comparisons with Tukey correction. RESULTS: In experiments with C acnes, beads containing ertapenem + vancomycin and vancomycin alone formed the largest zones of inhibition over time (P < .001). In experiments with Staphylococcus, beads containing vancomycin alone formed the largest zones of inhibition over time for all 5 strains (P < .001). Zones of inhibition were 1.4x larger for C acnes than for Staphylococcus with beads containing vancomycin alone. For both C acnes and Staphylococcus, beads containing ertapenem had the strongest initial effect, preventing all bacterial growth in C acnes and almost all growth for Staphylococcus during the first week but dropping substantially by the second week. Beads containing gentamicin alone consistently created smaller zones of inhibition than beads containing vancomycin alone, with vancomycin producing zones 5.3x larger than gentamicin in C acnes and 1.3x larger in Staphylococcus (P < .001). DISCUSSION: These data suggest that for both C acnes and Staphylococcal species, CS beads impregnated with vancomycin were most effective at producing a robust antibiotic effect. Additionally, ertapenem may be a viable supplement in order to create a more potent initial antibiotic effect but is not as effective as vancomycin when used alone. Gentamicin alone was not effective in maintaining consistent and long-term antibiotic effects. These results indicate that amongst the antibiotics currently commercially available to be used with CS, vancomycin is consistently superior to gentamicin in the setting of C. acnes and CNS.

Open Distal Femur Fractures Treated with Bone Cement Intramedullary Support Combined with Locked Plate Fixation.

Objective: The objective of this study was to assess the short-term clinical efficacy of the short-term clinical efficacy of bone cement intramedullary support combined with locked plate fixation in the treatment of such fractures. Methods: A retrospective study including 21 patients was reviewed at an urban level one trauma center. There were 17 males and 4 females, with a mean age of 33.9 years. Gustilo grade was II (12 cases), III-A (6 cases), III-B (2 cases), and III-C (1 case). Two fractures were AO-OTA type 33A3, 9 cases were type 33C2, and 10 cases were type 33C3. After the first stage debridement and temporary external fixation, all patients received bone cement intramedullary support combined with locked plate fixation through an anterolateral incision at the second stage.. The perioperative complications, need for bone graft, alignment, and radiographic union were recorded. At 1-year follow-up, the range of knee motion was recorded, and functional results were evaluated by the Hospital for Special Surgery (HSS) knee score. Results: All 21 patients were followed up for 12-36 months, with an average of 18.7 months. 1 case had superficial wound infection, and 2 cases had partial skin edge necrosis of the original open wound. After symptomatic dressing changes, they all healed well. 4 cases had autogenous bone grafting. 18 patients (85.7%) achieved radiographic union, with a mean union time of 6.2 months. Two patients underwent secondary operation 9 months after surgery due to nonunion and finally united after autologous bone grafting. One patient developed a deep infection 8 months after surgery and was successfully treated with Masquelet technique. Finally, bone union was achieved 7 months after surgery. The alignment was good in 17 patients (81.0%). No deep infection or hardware failure occurred during 1-year follow-up. The average range of knee extension and flexion was 5.2 ° and 106.8 °, respectively. The HSS score averaged 83.6. Conclusions: Bone cement intramedullary support combined with locked plate fixation was an effective treatment modality of open distal femur fractures with high union rate, low complication, adequate alignment and satisfactory functional outcomes.

Incorporation of black phosphorus nanosheets into poly(propylene fumarate) biodegradable bone cement to enhance bioactivity and osteogenesis.

BACKGROUND: Injectable bone cement is commonly used in clinical orthopaedics to fill bone defects, treat vertebral compression fractures, and fix joint prostheses during joint replacement surgery. Poly(propylene fumarate) (PPF) has been proposed as a biodegradable and injectable alternative to polymethylmethacrylate (PMMA) bone cement. Recently, there has been considerable interest in two-dimensional (2D) black phosphorus nanomaterials (BPNSs) in the biomedical field due to their excellent photothermal and osteogenic properties. In this study, we investigated the biological and physicochemical qualities of BPNSs mixed with PPF bone cement created through thermal cross-linking. METHODS: PPF was prepared through a two-step process, and BPNSs were prepared via a liquid phase stripping method. BP/PPF was subsequently prepared through thermal cross-linking, and its characteristics were thoroughly analysed. The mechanical properties, cytocompatibility, osteogenic performance, degradation performance, photothermal performance, and in vivo toxicity of BP/PPF were evaluated. RESULTS: BP/PPF exhibited low cytotoxicity levels and mechanical properties similar to that of bone, whereas the inclusion of BPNSs promoted preosteoblast adherence, proliferation, and differentiation on the surface of the bone cement. Furthermore, 200 BP/PPF demonstrated superior cytocompatibility and osteogenic effects, leading to the degradation of PPF bone cement and enabling it to possess photothermal properties. When exposed to an 808-nm laser, the temperature of the bone cement increased to 45-55 °C. Furthermore, haematoxylin and eosin-stained sections from the in vivo toxicity test did not display any anomalous tissue changes. CONCLUSION: BP/PPF exhibited mechanical properties similar to that of bone: outstanding photothermal properties, cytocompatibility, and osteoinductivity. BP/PPF serves as an effective degradable bone cement and holds great potential in the field of bone regeneration.

The effect of supplementing the calcium phosphate cement containing poloxamer 407 on cellular activities.

Calcium phosphate cement (CPC) is generally used for bone repair and augmentation. Poloxamers are tri-block copolymers that are used as surfactants but have applications in drug and antibiotic delivery. However, their biological effects on bone regeneration systems remain unelucidated. Here, we aimed to understand how supplementing the prototype CPC with poloxamer would impact cellular activity and its function as a bone-grafting material. A novel CPC, modified beta-tricalcium phosphate (mß-TCP) powder, was developed through a planetary ball-milling process using a beta-tricalcium phosphate (ß-TCP). The mß-TCP dissolves rapidly and accelerates hydroxyapatite precipitation; successfully shortening the cement setting time and enhancing the strength. Furthermore, the addition of poloxamer 407 to mß-TCP could reduce the risk of leakage from bone defects and improve fracture toughness while maintaining mechanical properties. In this study, the poloxamer addition effects (0.05 and 0.1 g/mL) on the cellular activities of MC3T3-E1 cells cultured in vitro were investigated. The cell viability of mß-TCP containing poloxamer 407 was similar to that of mß-TCP. All specimens showed effective cell attachment and healthy polygonal extension of the cytoplasm firmly attached to hydroxyapatite (HA) crystals. Therefore, even with the addition of poloxamer to mß-TCP, it does not have a negative effect to osteoblast growth. These data demonstrated that the addition of poloxamer 407 to mß-TCP might be considered a potential therapeutic application for the repair and regeneration of bone defects.

Development and validation of a nomogram for predicting new vertebral compression fractures after percutaneous kyphoplasty in postmenopausal patients.

BACKGROUND: Postmenopausal women face a heightened risk of developing new vertebral compression fractures (NVCFs) following percutaneous kyphoplasty (PKP) for osteoporotic vertebral compression fractures (OVCFs). This study aimed to develop and validate a visual nomogram model capable of accurately predicting NVCF occurrence post-PKP to optimize treatment strategies and minimize occurrence. METHODS: This retrospective study included postmenopausal women diagnosed with OVCF who underwent PKP at the Affiliated Hospital of Shandong University of Traditional Chinese Medicine between January 2016 and January 2021. Patient data, including basic information, surgical details, imaging records, and laboratory findings, were collected. The patients were categorized into two groups based on NVCF occurrence within 2 years post-PKP: the NVCF group and the non-NVCF group. Following the utilization of least absolute shrinkage and selection operator (LASSO) regression for feature selection, a nomogram was constructed. Model differentiation, calibration, and clinical applicability were evaluated using receiver operating characteristic (ROC), calibration, and decision (DCA) curve analyses. RESULTS: In total, 357 patients were included in the study. LASSO regression analysis indicated that cement leakage, poor cement diffusion, and endplate fracture were independent predictors of NVCF. The nomogram demonstrated excellent predictive accuracy and clinical applicability. CONCLUSIONS: This study used LASSO regression to identify three independent predictors of NVCF and developed a predictive model that could effectively predict NVCF occurrence in postmenopausal women. This simple prediction model can support medical decision-making and is feasible for clinical practice.

The impact of PEEK pretreatment using H2SO4, riboflavin, and aluminum trioxide on the extrusion bond strength to canal dentin luted with Polymethyl methacrylate and resin-based composite cement.

OBJECTIVE: To evaluate the effects of various surface pretreatment methods, including H2SO4, Riboflavin, and Al2O3, as well as different luting cement types, namely Methyl Methacrylate based Cement (MMBC) and composite-based cement (CBC), on the extrusion bond strength (EBS) of poly-ether-ether-ketone (PEEK) posts bonded to canal dentin. MATERIALS AND METHODS: This study involved 120 single-rooted human premolar teeth that underwent endodontic treatment. Following root canal preparation, PEEK posts were fabricated from PEEK blanks using a CAD-CAM system, resulting in a total of 120 posts. The posts were randomly assigned to one of four groups based on their post-surface conditioning: Group A H2SO4, Group B RF, Group C Al2O3, and Group D (NC), each consisting of 30 posts. Within each group, there were two subgroups based on the type of luting cement used for bonding. Subgroups A1, B1, C1, and D1 (n=15 each) utilized CBC, while Subgroups A2, B2, C2, and D2 (n=15 each) used MMBC.The bond strength between the PEEK posts and root dentin was assessed using a universal testing machine, and the failure modes were examined under a stereomicroscope. Statistical analysis, including one-way analysis of variance (ANOVA) and Tukey's Post Hoc test with a significance level of p=0.05, was performed to analyze the data and evaluate the effects of surface treatment and luting cement type on the bond strength. RESULTS: Group B2, which underwent RF conditioning followed by Super-Bond C&B cement application, exhibited the highest bond strength scores at the coronal section (9.57±0.67 MPa). On the other hand, Group D1, which had no conditioning (NC) and used Panavia® V5 cement, showed the lowest EBS at the apical third (2.39±0.72 MPa). The overall results indicate that the different conditioning regimens and luting cement types did not significantly influence the bond strength of PEEK posts to root dentin (p>0.05). CONCLUSIONS: Riboflavin activated by photodynamic therapy (PDT) and H2SO4 can be effective surface conditioners for PEEK posts. These treatments have shown potential for enhancing the bond strength between PEEK and resin cement. Additionally, the study revealed that MMA-based cement outperformed composite-based cement in terms of bond integrity with PEEK posts.

[Research progress of new multifunctional bone cement in bone tumor therapy].

Objective: The research progress of new multifunctional bone cement in bone tumor therapy in recent years was reviewed, in order to provide help for the future research of anti-tumor bone cement. Methods: The related literature on the treatment of bone tumors with new multifunctional bone cement at home and abroad in recent years was extensively reviewed and summarized. Results: The new multifunctional bone cements include those with the functions of photothermotherapy, magnetic thermotherapy, chemoradiotherapy, and antibacterial after operation, which are discussed from the aspects of anti-tumor, drug controlled release, and cytotoxicity. Controlled drug release has been achieved in multifunctional bone cements by adjusting heat and pH or incorporating particles such as chitosan oligosaccharides and γ-cyclodextrin. At present, multifunctional bone cement with hyperthermia, radiotherapy, and chemotherapy has effectively inhibited the local recurrence and distant metastasis of bone tumors. Broadening the application of bone cement for photothermal and magnetic thermal therapy to deeper bone tumors, investigating more precise controlled release of drug-loaded bone cement, and introducing nanoparticles with both thermal conversion and intrinsic enzymatic activities into bone cement for synergistic anti-tumor therapy are promising research directions. Conclusion: The new multifunctional bone cement inhibits bone tumor cells, promotes new bone formation in bone defects, and prevents incision infection after tumor resection. Certain progress has been made in anti-tumor, antibacterial, drug-controlled release, and reduction of cytotoxicity. Expanding the deeper application range of the new multifunctional bone cement, verifying the safety in clinical application, and focusing on the individualized treatment of the new multifunctional bone cement are the problems that need to be solved in the future.

[Robot-assisted PVP for the treatment of osteoporotic fractures of the upper thoracic vertebra].

OBJECTIVE: To investigate the clinical effect of "Tianji" orthopedic robot-assisted percutaneous vertebro plasty(PVP) surgery in the treatment of upper thoracic osteoporotic fracture. METHODS: A retrospective analysis was performed on 32 patients with upper thoracic osteoporotic fracture who underwent PVP surgery in Shenzhen Hospital of Traditional Chinese Medicine from August 2016 to June 2022. There were 8 males and 24 females, ranging in age from 58 to 90 years old, with a mean of (67.75±12.27) years old. Fifteen patients were treated with robot-assisted PVP surgery (robot group), including 3 males and 12 females, with an average age of (68.5±10.3) years. Fracture location:1 case of T2 fracture, 1 case of T3 fracture, 3 cases of T4 fracture, 3 cases of T5 fracture, and 7 cases of T6 fracture. The follow-up period ranged from 1.0 to 3.0 months, with a mean of (1.6±0.7) months. Seventeen patients underwent routine PVP surgery (conventional group), including 5 males and 12 females, with an average age of (66.8±11.6) years old. Fracture location:1 case of T1 fracture, 5 cases of T4 fracture, 2 cases of T5 fracture and 9 cases of T6 fracture. The follow-up period ranged from 0.5 to 4.0 months, with a mean of (1.5±0.6) months. Preoperative and postoperative visual analogue scale(VAS) and Oswestry disability index(ODI) scores were compared between the two groups, and the number of punctures, perspective times, operation time, intraoperative blood loss, bone cement distribution, bone cement leakage, and intraoperative radiation dose were compared between the two groups. RESULTS: Number of punctures times, perspective times, operation time, intraoperative blood loss, bone cement distribution, bone cement leakage and intraoperative radiation dose in the robot group were all significantly better than those in the conventional group(P<0.05). VAS of 2.03±0.05 and ODI of (22.16±4.03) % in the robot group were significantly better than those of the robot group before surgery, which were (8.67±0.25) score and (79.40±7.72)%(t=100.869, P<0.001;t=25.456, P<0.001). VAS of 2.17±0.13 and ODI of (23.88±6.15)% in the conventional group were significantly better than those before surgery, which were (8.73±0.18) score and (80.01±7.59)%(t=121.816, P<0.001;t=23.691, P<0.001). There was no significant difference in VAS and ODI between the two groups after operation (t=-3.917, P=0.476;t=-0.922, P=0.364). CONCLUSION: Robot-assisted PVP in the treatment of upper thoracic osteoporotic fractures can further improve surgical safety, reduce bone cement leakage, and achieve satisfactory clinical efficacy.

[Effect of acrylic bone cement mixed with calcium sulfate combined with percutaneous kyphoplasty in the treatment of osteoporotic fractures].

OBJECTIVE: To investigate the clinical efficacy of acrylic cement (PMMA) mixed with calcium sulfate combined with percutaneous kyphoplasty (PKP) in the treatment of osteoporotic fracture (OVCF). METHODS: The clinical data of 191 patients with OVCF treated with PKP from January 2020 to March 2021 were retrospectively analyzed. Among them, 82 patients with 94 vertebral bodies were treated with PMMA mixed with calcium sulfate as the observation group, and 109 patients with 125 vertebral bodies were treated with pure PMMA as the control group. Among the 82 patients in the observation group, there were 16 males and 66 females, with a mean age of (75.35±11.22) years old, including 36 thoracic vertebrae and 58 lumbar vertebrae. In the control group, there were 109 patients, 22 males and 87 females, with an average age of (74.51±9.21) years old, including 63 thoracic vertebrae and 62 lumbar vertebrae. The visual analog scale (VAS) before operation and 1 day, 3 months and 1 year after operation were calculated. The Oswestry disability index (ODI), Cobb's angle, vertebral body height and the probability of postoperative bone cement leakage were used to analyze the efficacy of the two groups. RESULTS: All the patients were followed up for more than one year. Compared with the control group, there was no significant difference in operation time, bleeding volume and bone cement injection volume between the two groups(P>0.05), while the leakage rate of bone cement was significantly lower in the observation group (P<0.05). In addition, there was no significant difference in VAS, ODI, Cobb angle, and vertebral body height between the two groups before operation, and 1 day, 3 months, and 1 year after operation (P>0.05), but each index was improved compared with that before operation (P<0.05). CONCLUSION: PMMA mixed with calcium sulfate has equivalent efficacy in treating OVCF than PMMA alone, but can effectively reduce the probability of cement leakage.

[Application of the theory of equal emphasis on muscle and bone in percutaneous vertebroplasty of lumbar osteoporotic compression fracture].

OBJECTIVE: To explore the clinical efficacy of percutaneous vertebroplasty(PVP) combined with nerve block in the treatment of lumbar osteoporotic vertebral compression fractures under the guidance of traditional chinese medicine "theory of equal emphasis on muscle and bone". METHODS: Total of 115 patients with lumbar osteoporotic vertebral compression fractures were treated by percutaneous vertebroplasty from January 2015 to March 2022, including 51 males and 64 females, aged 25 to 86 (60.5±15.9) years. Among them, 48 cases were treated with PVP operation combined with erector spinae block and joint block of the injured vertebral articular eminence (intervention group), and 67 cases were treated with conventional PVP operation (control group). The visual analogue scale(VAS) and Oswestry disability index(ODI) before operation, 3 days, 1 month and 6 months after operation between two groups were evaluated. The operation time, number of punctures and intraoperative bleeding between two groups were compared. RESULTS: The VAS and ODI scores of both groups improved significantly after operation compared with those before operation(P<0.05). Moreover, the VAS and ODI scores of 3 days and 1 month after operation of the intervention group improved more significantly than that of the control group(P<0.05). The difference of VAS and ODI scores before operation and 6 months after operation between two groups had no statistical significances(P>0.05). There was no statistically significant difference in the number of punctures and intraoperative bleeding between the two groups (P>0.05). CONCLUSION: Based on the theory of "equal emphasis on muscles and bones", PVP combined with nerve block can effectively relieve paravertebral soft tissue spasm and other "muscle injuries", which can significantly improve short-term postoperative low back pain and lumbar spine mobility compared to conventional PVP treatment, and accelerate postoperative recovery, resulting in satisfactory clinical outcomes.

Physicochemical properties and cytocompatibility of radiation-resistant and anti-washout calcium phosphate cement by introducing artemisia sphaerocephala krasch gum.

The anti-washout ability of calcium phosphate cement (CPC) determines the effectiveness of CPC in clinical application. The γ-ray irradiation method often used in the sterilization process of CPC products is easy to degrade some commonly polymer anti-washout agent, which greatly reduces its anti-washout performance. Artemisia sphaerocephala Krasch gum (ASKG) has the potential of radiation resistance and anti-washout, but no one has considered its performance as anti-washout agent of CPC and mechanism of radiation resistance and anti-washout so far. In this study, we report the effect of γ-ray on ASKG and the effectiveness of ASKG for enhancing of radiation resistance and anti-washout ability of CPC, the physical, chemical properties and in vitro cell behaviors of ASKG-CPCs were also investigated. The results showed that addition of ASKG before and after irradiation could significantly enhanced the anti-washout performance of CPC, which is differ from conventional anti-washout agents. Meanwhile, ASKG-CPCs had an excellent injectable property and biocompatibility, and low content of irradiated ASKG could promote bone differentiation well. We anticipate that the radiation-resistant and anti-washout ASKG-CPCs have potential application prospect in orthopaedic surgery.

Establishment of a novel risk prediction model for recompression of augmented vertebrae at the thoracolumbar junction and modified puncture technique for prevention: a multicenter retrospective study.

OBJECTIVE: Recompression of augmented vertebrae (RCAV) is often seen after percutaneous kyphoplasty (PKP), especially at the thoracolumbar junction. The authors aimed to develop and validate a risk prediction model (nomogram) for RCAV and to evaluate the efficacy of a modified puncture technique for RCAV prevention after PKP for thoracolumbar osteoporotic vertebral fractures (OVFs). METHODS: Patients who underwent PKP for single thoracolumbar OVFs (T10-L2) between January 2016 and October 2020 were reviewed and followed up for at least 2 years. All patients were randomly divided into a training group (70%) and a validation group (30%). Relevant potential data affecting recompression were collected. Predictors were screened by using binary logistic regression analysis to construct the nomogram. Calibration and receiver operating characteristic curves were used to evaluate the consistency of the prediction models. Finally, the efficacy of the modified puncture technique for prevention of RCAV in OVF patients with a preoperative intravertebral cleft (IVC) was further demonstrated through binary logistic regression analysis. RESULTS: Overall, 394 patients were included and 116 of them (29.4%) sustained RCAV. The independent risk factors included decreased bone mineral density, lower level of serum 25-hydroxy vitamin D3, larger C7-S1 sagittal vertical axis (SVA), preoperative IVC, and solid-lump cement distribution. The area under the curve (AUC) of the prediction model was 0.824 in the training group and 0.875 in the validation group patients. The calibration curve indicated the predictive power of this nomogram, with the preoperative IVC having the highest prediction accuracy (AUC 0.705). The modified puncture technique significantly reduced the incidence of RCAV by enhancing bone cement distribution into a sufficiently diffused distribution in OVF patients with preoperative IVC. CONCLUSIONS: The nomogram prediction model had satisfactory accuracy and clinical utility for identification of patients at low and high risk of postoperative RCAV. Patients at high risk of postoperative RCAV might benefit from the target puncture technique and vitamin D supplementation as well as effective antiosteoporotic therapies.

Optimization of an Injectable, Resorbable, Bioactive Cement Able to Release the Anti-Osteoclastogenic Biomolecule ICOS-Fc for the Treatment of Osteoporotic Vertebral Compression Fractures.

Vertebral compression fractures are typical of osteoporosis and their treatment can require the injection of a cement through a minimally invasive procedure to restore vertebral body height. This study reports the development of an injectable calcium sulphate-based composite cement able to stimulate bone regeneration while inhibiting osteoclast bone resorption. To this aim, different types of strontium-containing mesoporous glass particles (Sr-MBG) were added to calcium sulphate powder to impart a pro-osteogenic effect, and the influence of their size and textural features on the cement properties was investigated. Anti-osteoclastogenic properties were conferred by incorporating into poly(lactic-co-glycolic)acid (PLGA) nanoparticles, a recombinant protein able to inhibit osteoclast activity (i.e., ICOS-Fc). Radiopaque zirconia nanoparticles (ZrO2) were also added to the formulation to visualize the cement injection under fluoroscopy. The measured cement setting times were suitable for the clinical practice, and static mechanical testing determined a compressive strength of ca. 8 MPa, comparable to that of human vertebral bodies. In vitro release experiments indicated a sustained release of ICOS-Fc and Sr2+ ions up to 28 days. Overall, the developed cement is promising for the treatment of vertebral compression fractures and has the potential to stimulate bone regeneration while releasing a biomolecule able to limit bone resorption.

Augmented osteosynthesis in fragility fracture.

Due to poor bone quality and complexity, some fractures are difficult to treat, with high risk of failure. Moreover, general health is often poor in elderly patients with multiple comorbidity and poor compliance, necessitating perfect first-line management to avoid re-operation. The armamentarium comprises specific internal fixation implants and also complementary methods such as autologous, homologous or heterologous bone graft or bone substitutes with varying mechanical and biological characteristics. Associating these options is what is mean by "augmented fixation". The present review of augmented osteosynthesis addresses the following questions: What are the characteristics of fragility fractures? Fragility fracture is caused by low-energy trauma on bone with poor structural quality and low mineral density. Treatment aims to enable early mobilization and weight-bearing while avoiding mechanical failure of fixation. Prolonged bedrest, loss of mobility and surgical revision are aggravating and sometimes fatal factors in these fragile patients. What are the biological techniques of fixation augmentation in fragility fracture? Autologous or homologous bone graft are the most widely used biological augmentation techniques. They fill spaces and promote osteoconduction and consolidation. Some bone-like phosphocalcic structures are opening up promising lines of research. What are the non-biological techniques of fixation augmentation in fragility fracture? Hydroxyapatite, phosphocalcic cement and acrylic cement are the most widely used synthetic materials. Biological and mechanical effects are variable according to composition, requiring specific implementation. What are the mechanical techniques of fixation augmentation in fragility fracture? There is at present no consensus as to the augmentation techniques to be applied in fragility fracture. Cerclage or complementary plating, or external fixation associated to internal fixation are possibilities. However, the literature consists only of small series reporting surgical techniques specific to a given surgeon or team. When and how should osteosynthesis for fragility fracture be augmented? The choice of augmentation depends on fracture location, comminution, available material and local experience. The more severe the fracture, the more complex the fixation. The approach needs to be adapted to the preoperative planning and the associated mechanical means (plate, complementary cerclage) and prosthetic replacement should be considered in certain joint fractures or fractures close to load-bearing surfaces. LEVEL OF EVIDENCE: V; expert opinion.

Occurrence of adjacent segment fractures after surgical treatment of an osteoporotic vertebral fracture: a retrospective comparison between two different treatment methods.

INTRODUCTION: Osteoporotic vertebral fractures are a major healthcare problem. Vertebral cement augmentation (VCA) is frequently used as a minimally invasive surgical approach to manage symptomatic fractures. However, there is a potential risk of adjacent segment fracture (ASF), which may require second surgery. The addition of transcutaneous screw-fixation with cement augmentation superior and inferior to the fracture [Hybrid transcutaneous screw fixation (HTSF)] might represent an alternative treatment option to reduce the incidence of ASF. MATERIALS AND METHODS: We retrospectively compared surgery time, hospital stay, intraoperative complication rate and the occurrence of ASF with the need for a surgical treatment in a cohort of 165 consecutive patients receiving either VCA or HTSF in our academic neurosurgical department from 2012 to 2020. The median follow-up was 52.3 weeks in the VCA-group and 51.9 in the HTSF-group. RESULTS: During the study period, 93 patients underwent VCA, and 72 had HTSF. Of all patients, 113 were females (64 VCA; 49 HTSF) and 52 were males (29 VCA; 23 HTSF). The median age was 77 years in both groups. Median surgery time was 32 min in the VCA-group and 81 min in the HTSF-group (p < 0.0001). No surgery-related complications occurred in the VCA-group with two in the HTSF-group (p = 0.19). ASF was significantly higher in the VCA-group compared to HTSF (24 [26%] vs. 8 [11%] patients; p < 0.02). The proportion of patients requiring additional surgery due to ASF was higher in the VCA-group (13 vs. 6%), but this difference was not statistically significant (p = 0.18). Median hospital stay was 9 days in the VCA-group and 11.5 days in the HTSF-group (p = 0.0001). CONCLUSIONS: Based on this single-center cohort study, HTSF appears to be a safe and effective option for the treatment of osteoporotic vertebral compression fractures. Surgical time and duration of hospital stay were longer in the HTSF-group, but the rate of ASF was significantly reduced with this approach. Further studies are required to ascertain whether HTSF results in superior long-term outcomes or improved quality of life.

An assessment of physical properties and the viability of osteoblast-like cells of cefazolin-impregnated calcium sulfate bone-void filler.

Calcium sulfate, an injectable and biodegradable bone-void filler, is widely used in orthopedic surgery. Based on clinical experience, bone-defect substitutes can also serve as vehicles for the delivery of drugs, for example, antibiotics, to prevent or to treat infections such as osteomyelitis. However, antibiotic additions change the characteristics of calcium sulfate cement. Moreover, high-dose antibiotics may also be toxic to bony tissues. Accordingly, cefazolin at varying weight ratios was added to calcium sulfate samples and characterized in vitro. The results revealed that cefazolin changed the hydration reaction and prolonged the initial setting times of calcium sulfate bone cement. For the crystalline structure identification, X-ray diffractometer revealed that cefazolin additive resulted in the decrease of peak intensity corresponding to calcium sulfate dihydrate which implying incomplete phase conversion of calcium sulfate hemihydrate. In addition, scanning electron microscope inspection exhibited cefazolin changed the morphology and size of the crystals greatly. A relatively higher amount of cefazolin additive caused a faster degradation and a lower compressive strength of calcium sulfate compared with those of uploaded samples. Furthermore, the extract of cefazolin-impregnated calcium sulfate impaired cell viability, and caused the death of osteoblast-like cells. The results of this study revealed that the cefazolin additives prolonged setting time, impaired mechanical strength, accelerated degradation, and caused cytotoxicity of the calcium sulfate bone-void filler. The aforementioned concerns should be considered during intra-operative applications.

Application of the theory of equal emphasis on muscle and bone in percutaneous vertebroplasty of lumbar osteoporotic compression fracture / 中国骨伤

OBJECTIVE@#To explore the clinical efficacy of percutaneous vertebroplasty(PVP) combined with nerve block in the treatment of lumbar osteoporotic vertebral compression fractures under the guidance of traditional chinese medicine "theory of equal emphasis on muscle and bone".@*METHODS@#Total of 115 patients with lumbar osteoporotic vertebral compression fractures were treated by percutaneous vertebroplasty from January 2015 to March 2022, including 51 males and 64 females, aged 25 to 86 (60.5±15.9) years. Among them, 48 cases were treated with PVP operation combined with erector spinae block and joint block of the injured vertebral articular eminence (intervention group), and 67 cases were treated with conventional PVP operation (control group). The visual analogue scale(VAS) and Oswestry disability index(ODI) before operation, 3 days, 1 month and 6 months after operation between two groups were evaluated. The operation time, number of punctures and intraoperative bleeding between two groups were compared.@*RESULTS@#The VAS and ODI scores of both groups improved significantly after operation compared with those before operation(P<0.05). Moreover, the VAS and ODI scores of 3 days and 1 month after operation of the intervention group improved more significantly than that of the control group(P<0.05). The difference of VAS and ODI scores before operation and 6 months after operation between two groups had no statistical significances(P>0.05). There was no statistically significant difference in the number of punctures and intraoperative bleeding between the two groups (P>0.05).@*CONCLUSION@#Based on the theory of "equal emphasis on muscles and bones", PVP combined with nerve block can effectively relieve paravertebral soft tissue spasm and other "muscle injuries", which can significantly improve short-term postoperative low back pain and lumbar spine mobility compared to conventional PVP treatment, and accelerate postoperative recovery, resulting in satisfactory clinical outcomes.

Bone healing study of alendronate combined with enoxaparin sodium bone cement in rabbits with bone defects.

BACKGROUND: To observe the effect of enoxaparin sodium-polymethyl methacrylate (ES-PMMA) bone cement supplemented with alendronate (AN) on bone repair of bone defects in New Zealand rabbits. METHODS: Twenty-seven New Zealand rabbits were randomly divided into ES/AN, ES-PMMA and PMMA groups, with a total of 27 New Zealand rabbits. The drugs loaded in 40 g bone cement powder were as follows: ES/AN group 8000 AxaIU enoxaparin (ES) and 200 mg alendronate (AN), ES-PMMA group 8000 AxaIU enoxaparin (ES), PMMA group without drugs. A bone defect model with a length of 10 mm and a diameter of 5 mm was made from the left tibia of rabbits, and the prepared bone cement was placed in the tibia defect. At 4 weeks, 8 weeks and 12 weeks after the operation, 3 rabbits in each group were sacrificed, and left tibia samples were collected for histological scoring, HE staining and Masson staining. Bone mineral density and new bone volume were measured by imaging, and the related data were processed by one-way ANOVA and least significance difference (LSD) post hoc test. RESULTS: (1) Bone mineral density (BMD, mg/mm3) around the bone defect: at the 4th week, BMD in the ES/AN group was higher than that in the PMMA group; at the 8th week, the BMD in the ES/AN group was significantly higher than that in the other two groups; and at the 12th week, the BMD in the ES/AN group was significantly higher than that in the other two groups. (2) New bone volume (BV, mm3): at the 4th week, BV in the ES/AN group was significantly higher than that in the other two groups, BV in the ES/AN group was significantly higher than that in the other two groups at the 8th and 12th weeks, and BV in the ES-PMMA group was higher than that in the PMMA group. (3) Histological score: at the 4th and 8th weeks, the histological score of the ES/AN group was higher than that of the PMMA group, and at the 12th week, the histological score of the ES/AN group was higher than that of the other two groups. (4) Cortical bone thickness (µm): at the 4th, 8th and 12th weeks, the cortical bone thickness in the ES/AN group was higher than that in the other two groups, and the cortical bone thickness in the ES-PMMA group was higher than that in the PMMA group. (5) The percentage of mature area of new bone in the ES/AN group was higher than that in the other two groups at the 4th week, and at the 8th and 12th weeks, the percentage of mature area of new bone in the ES/AN group and ES-PMMA group was significantly higher than that in the PMMA group. CONCLUSION: (1) Enoxaparin sodium bone cement supplemented with alendronate was superior to enoxaparin sodium bone cement and PMMA bone cement in promoting bone repair of tibial bone defects in New Zealand rabbits. (2) Enoxaparin sodium bone cement is superior to PMMA bone cement in promoting bone repair, showing a certain osteogenic potential.

In vivo mimicking injectable self-setting composite bio-cement: Scanning acoustic diagnosis and biological property evaluation for tissue engineering applications.

Injectability and self-setting properties are important factors to increase the efficiency of bone regeneration and reconstruction, thereby reducing the invasiveness of hard tissue engineering procedures. In this study, 63S bioactive glass (BG), nano-hydroxyapatite (n-HAp), alumina, titanium dioxide, and methylene bis-acrylamide (MBAM)-mediated polymeric crosslinking composites were prepared for the formulation of an efficient self-setting bone cement. According to the cytocompatibility and physicochemical analyses, all the samples qualified the standard of the bio-composite materials. They revealed high thermal stability, injectability, and self-setting ability supported by ~ 10.73% (maximum) mass loss, ~ 92-93% injectability and 24 ± 5 min of initial setting time. Moreover, a cellular adhesion and proliferation study was additionally performed with osteoblasts like MG-63 cells, which facilitate pseudopod-like cellular extensions on the BG/n-HAp composite scaffold surface. The SAM study was employed to non-invasively assess the self-setting properties of the composite bio-cement using the post injected distribution and physical properties of the phantom. These results validate the significant potential characteristics of the BG/n-HAp self-setting bio-cement (16:4:2:1) for promising minimal-invasive bone tissue engineering applications.

Development of Injectable Calcium Sulfate and Self-Setting Calcium Phosphate Composite Bone Graft Materials for Minimally Invasive Surgery.

The demand of bone grafting is increasing as the population ages worldwide. Although bone graft materials have been extensively developed over the decades, only a few injectable bone grafts are clinically available and none of them can be extruded from 18G needles. To overcome the existing treatment limitations, the aim of this study is to develop ideal injectable implants from biomaterials for minimally invasive surgery. An injectable composite bone graft containing calcium sulfate hemihydrate, tetracalcium phosphate, and anhydrous calcium hydrogen phosphate (CSH/CaP paste) was prepared with different CSH/CaP ratios and different concentrations of additives. The setting time, injectability, mechanical properties, and biocompatibility were evaluated. The developed injectable CSH/CaP paste (CSH/CaP 1:1 supplemented with 6% citric acid and 2% HPMC) presented good handling properties, great biocompatibility, and adequate mechanical strength. Furthermore, the paste was demonstrated to be extruded from a syringe equipped with 18G needles and exerted a great potential for minimally invasive surgery. The developed injectable implants with tissue repairing potentials will provide an ideal therapeutic strategy for minimally invasive surgery to apply in the treatment of maxillofacial defects, certain indications in the spine, inferior turbinate for empty nose syndrome (ENS), or reconstructive rhinoplasty.