Extraction solvent selection for Cannabis sativa L. by efficient exploration of cannabinoid selectivity and phytochemical diversity.

INTRODUCTION: Cannabis sativa L. is attracting worldwide attention due to various health-promoting effects. Extraction solvent type is critical for the recovery of bioactive compounds from the plant, especially cannabinoids. However, the choice of solvent is varied and not adequately warranted elsewhere, causing confusion in involved fields. OBJECTIVE: The present work aimed to investigate the effect of extraction solvent on C. sativa (hemp) with regard to cannabinoid recovery and phytochemical profile of the extracts, considering most of the related solvents. METHODOLOGY: The majority of solvents reported for C. sativa (n = 14) were compared using a representative hemp pool. Quantitative results for major and minor cannabinoids were rapidly and reliably obtained using ultrahigh-performance liquid chromatography coupled with photodiode array detection (UPLC-PDA). In parallel, high-performance thin-layer chromatographic (HPTLC) fingerprinting was employed, involving less toxic mobile phase than in relevant reports. Various derivatisation schemes were applied for more comprehensive comparison of extracts. RESULTS: Differential selectivity towards cannabinoids was observed among solvents. MeOH was found particularly efficient for most cannabinoids, in addition to solvent systems such as n-Hex/EtOH 70:30 and ACN/EtOH 80:20, while EtOH was generally inferior. For tetrahydrocannabinol (THC)-type compounds, EtOAc and n-Hex/EtOAc 60:40 outperformed n-Hex, despite its use in the official EU method. Solvents that tend to extract more lipids or more polar compounds were revealed based on HPTLC results. CONCLUSION: Combining the observations from UPLC quantitation and HPTLC fingerprinting, this work allowed comprehensive evaluation of extraction solvents, in view of robust quality assessment and maximised utilisation of C. sativa.

The putative cannabinoid-secreting trichome of Trema micrantha (L.) Blume (Cannabaceae).

Trema, a genus of the popularly known Cannabaceae, has recently been the subject of cannabinoid bioprospection. T. micrantha is a tree with pharmacological potential widely used in folk medicine. It has two types of glandular trichomes, bulbous and filiform, spread throughout the plant body. Considering the proximity of this species to Cannabis sativa and Trema orientalis, species containing cannabinoids, the glandular trichomes of T. micrantha are also expected to be related to the secretion of these compounds. Thus, this study aims to detail the morphology of secretory trichomes during the synthesis, storing and release of metabolites in T. micrantha. We tested the proposition that they could be a putative type of cannabinoid-secreting gland. Pistillate and staminate flowers and leaves were collected and processed for ontogenic, histochemical, and ultrastructural analyses. Both types of glandular trichomes originate from a protodermal cell. They are putative cannabinoid-secreting sites because: (1) terpene-phenols and, more specifically, cannabinoids were detected in situ; (2) their secretory subcellular apparatus is consistent with that found in C. sativa: modified plastids, polyribosomes, an extensive rough endoplasmic reticulum, and a moniliform smooth endoplasmic reticulum. Plastids and smooth endoplasmic reticulum are involved in the synthesis of terpenes, while the rough endoplasmic reticulum acts in the phenolic synthesis. These substances cross the plasma membrane by exocytosis and are released outside the trichome through cuticle pores. The study of the cell biology of the putative cannabinoid glands can promote the advancement of prospecting for natural products in plants.

Determination of Cannabinoids in Cannabis sativa Oil and Infused Ice Cream by LC-DAD Method.

BACKGROUND: Cannabis sativa is known to produce a class of terpenophenolic compounds named cannabinoids. The two main ones are cannabidiol (CBD) and tetrahydrocannabinol (THC), which have therapeutic properties. In the development of cannabis-based preparations, it is important to have suitable analytical methods for the analysis of the principal cannabinoids. OBJECTIVE: This study aimed to develop and validate a simple and rapid HPLC method with photodiode array detection for determination of CBD and THC in Cannabis sativa oil extract and infused ice cream, including a stability study. METHOD: Chromatographic separation of CBD and THC was performed with a C18 column, with a mobile phase consisting of acetonitrile and water with formic acid (80 + 20 v/v) in isocratic elution mode, with detection at 208 nm for CBD and 280 nm for THC and 1.0 mL/min flow rate. RESULTS: The method was linear over a range of 1-5 µg/mL for CBD, and 20-100 µg/mL for THC; the relative standard deviation was <3.6%, the recovery ranged between 98.8 and 102.5% for oil and between 84 and 94% for ice cream, QL was 0.33 µg/mL for CBD and 2.30 µg/mL for THC, and the assay demonstrated adequate selectivity. CBD and THC were stable for at least 28 days under light protection at 22°C, 4°C, and -20°C in the oil and for at least 60 days at -20°C in the ice cream. CONCLUSIONS: The results showed that the method was suitable for quantitative determination of CBD and THC in Cannabis sativa oil extract and infused ice cream, and it is useful for quality control purposes. HIGHLIGHTS: The method is simple and fast, and it is useful for the quality control of a new product corresponding to an ice cream based on a Cannabis sativa oil extract.

Development and Validation of a Simple, Fast, and Accessible HPLC-UV Method for Cannabinoids Determination in Cannabis sativa L. Extracts and Medicinal Oils.

INTRODUCTION: Cannabis sativa L. is a well-recognized medicinal plant. Cannabis regulations in Argentina are insufficient to solve the problem of patient access to full-spectrum cannabis-based products. So, the market of artisanal products with unknown quality and dosage of cannabinoids is increasing, and so is the local demand and need for analyzing these products. However, much of the latest validated methodologies for cannabinoid quantification include expensive instrumentation that is not always available in laboratories of health institutions in Argentina. METHODS: The aim of this work was to develop and validate a simple and rapid HPLC-UV method for the identification and quantification of principal cannabinoids in cannabis resins, inflorescences, and medicinal oils using standard HPLC equipment. The cannabinoids selected for validation were cannabidiol acid (CBDA), cannabigerol (CBG), cannabidiol (CBD), cannabinol (CBN), delta-9-tetrahydrocannabinol (Δ9-THC), cannabichromene (CBC), and tetrahydrocannabinol acid (THCA). A method for the simultaneous identification and quantification of these 7 main cannabinoids was developed and then validated. Some data parameters were comparable to other reports with more sophisticated analytical instruments for the analysis of cannabis. The assessed limits of detection and the limits of quantitation ranged from 0.9 to 3.66 µg/mL and 2.78 to 11.09 µg/mL, respectively. The concentration-response relationship of the method indicated a linear relationship between the concentration and peak area with R2 values of > 0.99 for all 7 cannabinoids. RESULTS: The relative standard deviation (RSD%) varied from 2.34 to 4.82 for intraday repeatability and from 1.16 to 3.15 for interday repeatability. The percentage of recovery values was between 94 to 115% (resins) and 80 to 103% (inflorescence extract). The cannabis industry is growing rapidly, and there is a need for reliable testing methods to ensure the safety and efficacy of cannabis products. In addition, current methods for cannabinoid analysis are often time-consuming and expensive, while the HPLC-UV method herein reported is a simple, rapid, accurate, and cost-effective alternative for the analysis of cannabinoids in cannabis resins, inflorescences, and medicinal oils. CONCLUSION: This method will be proposed to be included in the Cannabis sativa L. monograph of the Argentine Pharmacopoeia.

An electrochemical approach for the prediction of Δ9-tetrahydrocannabinolic acid and total cannabinoid content in Cannabis sativa L.

Two electrochemical sensors are proposed here for the first time for the fast screening of cannabinoids in Cannabis sativa L. plant material (inflorescences). The accurate control of cannabinoid content is important for discriminating between recreational, i.e. illegal, and fibre-type C. sativa samples, which differ mainly according to the amount of Δ9-tetrahydrocannabinol (Δ9-THC) and Δ9-tetrahydrocannabinolic acid (Δ9-THCA). Two screen printed electrodes obtained using different electrode materials were tested for the analysis of extracts from recreational and fibre-type C. sativa and their performance was compared with a consolidated method based on high-performance liquid chromatography (HPLC). The voltammetric responses recorded in the different samples reflected the compositional differences of the recreational and fibre-type extracts in accordance with the results of HPLC analyses. Moreover, the quantification of Δ9-THCA and the total cannabinoid content on the basis of the intensity of the peaks of the voltammograms was possible through a simple and fast electrochemical procedure.

[Optimized chromatographic methods for the identification and quantification of terpenes in Cannabis sativa oil for medicinal use] / Métodos cromatográficos optimizados para la identificación y cuantificación de terpenos en aceite de Cannabis sativa de uso medicinal.

Introduction: Cannabis sativa is a plant species with numerous active principles, so the list of its therapeutic uses is expanding. In this sense, there are numerous evidences of the possible medicinal use of terpenes, as well as their synergism with cannabinoids (entourage effect). Thus, as more countries contemplate the legalization and authorization of medical cannabis, the number of cannabis extraction and analysis laboratories is increasing to meet the demand, requiring adequate analytical tools. Methodology: In response to numerous inquiries from physicians, analytical laboratories and users, the PROBIEN chromatography laboratory has selected two methods for the analysis of terpenes in Cannabis oil by gas chromatography technique (GC-FID). The methods are described using HP-5 and Innowax columns. The external standard method was used for the quantitative determination of ß-Pinene, Myrcene, p-Cymene, Limonene, Linalool, α-Terpineol, Nerol and Geraniol. Results: good peak separation and reproducibility were observed, appropriate for the identification and quantification of the main terpenes in Cannabis extracts. The area/concentration ratio was linear in the range of 0.0005 to 2.0 mg/ml. Main conclusion: The described methods allow the identification and quantification of the major terpenes in Cannabis oil for an adequate quality control.

Introducción: Cannabis sativa es una especie vegetal con gran número de principios activos, por lo que la lista de sus usos terapéuticos se está ampliando. En este sentido, hay numerosas evidencias del posible uso medicinal de los terpenos, así como del sinergismo de ellos con los cannabinoides (efecto séquito). Así, a medida que más países contemplan la legalización y autorización del cannabis medicinal, el número de laboratorios de extracción y análisis de cannabis aumenta para satisfacer la demanda, requiriéndose herramientas analíticas adecuadas. Metodología: En respuesta a numerosas consultas de médicos, laboratorios de análisis y usuarios, el laboratorio de cromatografía del PROBIEN ha seleccionado dos métodos para el análisis de terpenos en aceite de Cannabis por la técnica de cromatografía gaseosa (GC-FID). Se describen los métodos usando las columnas HP-5 e Innowax. Se empleó el método del estándar externo para la determinación cuantitativa de ß-Pineno, Myrceno, p-Cymeno, Limoneno, Linalool, α-Terpineol, Nerol y Geraniol. Resultados: se observó una buena separación de picos y reproducibilidad, apropiadas para la identificación y cuantificación de los principales terpenos en extractos de Cannabis. La relación área/concentración fue lineal en el rango de 0,0005 a 2,0 mg/ml. Conclusión principal: los métodos descritos permiten la identificación y cuantificación de los terpenos mayoritarios en aceite de Cannabis para un control de calidad adecuado.

Cannabinoid contents in hemp teas and estimation of their transfer into tea infusions.

This study focused on the investigation of cannabinoid profiles and contents of 23 different hemp teas and on the individual transfer of 16 cannabinoids from hemp teas into their tea infusions. The total cannabinoid content in the dry products averaged 14,960 mg kg-1, with CBD&CBDA (sum of cannabidiol (CBD) and cannabidiolic acid (CBDA)) being the major component, accounting for 87% of the total cannabinoid content. The Δ9-tetrahydrocannabinol (Δ9-THC) content ranged from 16 mg kg-1 to 935 mg kg-1 and was on average 221 mg kg-1. For each hemp tea, an infusion was prepared according to a standardized protocol issued by the German Standardisation body DIN and transfer rates per cannabinoid were estimated by comparing the contents in the dry material with the concentrations in the aqueous infusion. The limited water solubility of cannabinoids results in limited extraction efficiency for cannabinoids using boiling water to prepare a tea infusion and the average transfer rate of the psychoactive Δ9-THC was only 0.5%.

Enantioseparation of chiral phytocannabinoids in medicinal cannabis.

The evaluation of the chiral composition of phytocannabinoids in the cannabis plant is particularly important as the pharmacological effects of the (+) and (-) enantiomers of these compounds are completely different. Chromatographic attempts to assess the presence of the minor (+) enantiomers of the main phytocannabinoids, cannabidiolic acid (CBDA) and trans-Δ9-tetrahydrocannabinolic acid (trans-Δ9-THCA), were carried out on heated plant extracts for the determination of the corresponding decarboxylated species, cannabidiol (CBD) and trans-Δ9-tetrahydrocannabinol (trans-Δ9-THC), respectively. This process produces an altered phytocannabinoid composition with several new and unknown decomposition products. The present work reports for the first time the stereoselective synthesis of the pure (+) enantiomers of the main phytocannabinoids, trans-CBDA, trans-Δ9-THCA, trans-CBD and trans-Δ9-THC, and the development and optimization of an achiral-chiral liquid chromatography method coupled to UV and high-resolution mass spectrometry detection in reversed phase conditions (RP-HPLC-UV-HRMS) for the isolation of the single compounds and evaluation of their actual enantiomeric composition in plant. The isolation of the peaks with the achiral stationary phase ensured the absence of interferences that could potentially co-elute with the analytes of interest in the chiral analysis. The method applied to the Italian medicinal cannabis variety FM2 revealed no trace of the (+) enantiomers for all phytocannabinoids under investigation before and after decarboxylation, thus suggesting that the extraction procedure does not lead to an inversion of configuration.

Characterization of the Antitumor Potential of Extracts of Cannabis sativa Strains with High CBD Content in Human Neuroblastoma.

Cannabis has been used for decades as a palliative therapy in the treatment of cancer. This is because of its beneficial effects on the pain and nausea that patients can experience as a result of chemo/radiotherapy. Tetrahydrocannabinol and cannabidiol are the main compounds present in Cannabis sativa, and both exert their actions through a receptor-mediated mechanism and through a non-receptor-mediated mechanism, which modulates the formation of reactive oxygen species. These oxidative stress conditions might trigger lipidic changes, which would compromise cell membrane stability and viability. In this sense, numerous pieces of evidence describe a potential antitumor effect of cannabinoid compounds in different types of cancer, although controversial results limit their implementation. In order to further investigate the possible mechanism involved in the antitumoral effects of cannabinoids, three extracts isolated from Cannabis sativa strains with high cannabidiol content were analyzed. Cell mortality, cytochrome c oxidase activity and the lipid composition of SH-SY5Y cells were determined in the absence and presence of specific cannabinoid ligands, with and without antioxidant pre-treatment. The cell mortality induced by the extracts in this study appeared to be related to the inhibition of the cytochrome c oxidase activity and to the THC concentration. This effect on cell viability was similar to that observed with the cannabinoid agonist WIN55,212-2. The effect was partially blocked by the selective CB1 antagonist AM281, and the antioxidant α-tocopherol. Moreover, certain membrane lipids were affected by the extracts, which demonstrated the importance of oxidative stress in the potential antitumoral effects of cannabinoids.

Phytocannabinoids - An Overview of the Analytical Methodologies for Detection and Quantification of Therapeutically and Recreationally Relevant Cannabis Compounds.

The legalization of the cultivation of low Δ9-tetrahydrocannabinol (Δ9-THC) and high cannabidiol (CBD) Cannabis Sativa plants is gaining momentum around the world due to increasing demand for CBD-containing products. In many countries where CBD oils, extracts and CBD-infused foods and beverages are being sold in health shops and supermarkets, appropriate testing of these products is a legal requirement. Normally this involves determining the total Δ9-THC and CBD and their precursor tetrahydrocannabinolic acids (THCA) and cannabidiolic acid (CBDA). As our knowledge of the other relevant cannabinoids expands, it is likely so too will the demand for them as additives in many consumer products ensuring a necessity for quantification methods and protocols for their identification. This paper discusses therapeutically relevant cannabinoids found in Cannabis plant, the applicability and efficiency of existing extraction and analytical techniques as well as the legal requirements for these analyses.

Cannabinoid Content in Cannabis Flowers and Homemade Cannabis-Based Products Used for Therapeutic Purposes in Argentina.

Introduction: A recent law (DCTO-2020-883-APN-PTE-Law No. 27,350. Regulation) passed in Argentina put an end to the ban imposed for the last 60 years on cannabis cultivation within the country. The law permits restricted access to cannabis derivatives for medicinal, therapeutic, and palliative use by individuals and communities, allowing self- and community-based cannabis production. This is cause for concern in view of the lack of quality controls for cannabis derivatives. The several varieties of cannabis grown in Argentina have different chemical profiles and are processed in a variety of ways-mostly by alcohol extraction or maceration at different temperatures and for different amounts of times-making the cannabinoid content of these preparations highly variable. Determining the characteristics of home- and community-grown cannabis products will facilitate the implementation of public policies conducive to their safety and improvement. Objective: The aim of this study was to determine the cannabinoid chemotypes used for therapeutic purposes in Argentina and evaluate whether the cannabinoids present in homemade derivatives are comparable to those in commercially available products. Materials and Methods: High performance liquid chromatography with ultraviolet and diode array detector (HPLC/UV-DAD) analysis of 436 samples (oils, resins, and inflorescences) was carried out to determine the identity and concentration of five cannabinoids: tetrahydrocannabinolic acid (THCA), tetrahydrocannabinol (THC), cannabidiolic acid (CBDA), cannabidiol (CBD), and cannabinol (CBN). From three different sources, the samples represent the type of medical cannabis preparations to which patients have access. Results: The results indicate that the medium-to-low cannabinoid concentration in a significant number of homemade oil samples is similar to that found in commercial products. Most of the samples have a THC/CBD ratio >1 or only contain THC. Acidic cannabinoids were detected in homemade preparations, but were not reported in package inserts of commercial products. Conclusions: Our results indicate that despite their considerable variability, homemade preparations as a whole show cannabinoid levels and profiles equivalent to the commercially available products commonly used for medicinal, therapeutic, and palliative purposes in Argentina.

Cannabidiol in urine is not a proof of CBD consumption-lesson learned from urine sample analysis in routine caseworks.

PURPOSE: Cannabidiol (CBD) has been gaining popularity in recent years. Knowing that CBD products can contain more tetrahydrocannabinol (THC) than expected, interpretation of cannabinoids concentration in urine can be tricky, especially when low amounts of THC and CBD are found. Moreover, interpretation can also be difficult due to interindividual variation in pharmacokinetics. The objective of this work was to take a critical look at the data from our daily practice as a toxicology laboratory. METHODS: We have collected results obtained in a first batch of 1074 urine samples submitted to cannabinoids analysis, and results of cannabinoids content of a second batch of 719 seized materials. RESULTS: CBD was detected in 163 urine specimens (15%). Its concentration was higher than the limit of quantification of 5 ng/mL in 108 samples only (10% of the sampling population). Most of CBD-positive samples were associated with a high THC-COOH concentration (> 500 ng/mL in 63.8% of CBD-positive samples) suggesting only a few CBD consumers in our population. Cannabinoids composition of seized plant materials (drug type at first glance) revealed CBD in 110 of them (15% of the sampling population), with a concentration mostly below 1%. All of the resin samples were CBD positive, and contained more THC compared to flowers. CONCLUSIONS: We can conclude that urine samples from drug-type cannabis users contained a low amount of CBD, what was not described previously. These findings are useful for the interpretation of cannabinoids results in daily practice.

Foodomics Reveals Anti-Obesity Properties of Cannabinoids from Hemp Oil.

SCOPE: Molecular networking (MN) analysis intends to provide chemical insight of untargeted mass spectrometry (MS) data to the user's underlying biological questions. Foodomics is the study of chemical compounds in food using advanced omics methods. In this study, an MS-MN-based foodomics approach is developed to investigate the composition and anti-obesity activity of cannabinoids in hemp oil. METHODS AND RESULTS: A total of 16 cannabinoids are determined in optimized microwave pretreatment of hemp oil using the developed approach. Untargeted metabolomics analysis reveals that cannabinoid extract (CE) and its major constituent (cannabidiol, CBD), can alleviate high glucose-induced increases in lipids and carbohydrates, and decreases in amino acid and nucleic acid. Moreover, CE and CBD are also found to suppress the expression levels of mdt-15, sbp-1, fat-5, fat-6, fat-7, daf-2, and elevate the expression level of daf-1, daf-7, daf-16, sod-3, gst-4, lipl-4, resulting in the decrease of lipid synthesis and the enhance of kinetism. Canonical correspondence analysis (CCA) uncovers strong associations between specific metabolic alterations and gene expression levels. CONCLUSION: These findings from this exploratory study offer a new insight into the roles of cannabinoids in the treatment of obesity and related complications.

Development and Validation of a GC-FID Method for the Quantitation of 20 Different Acidic and Neutral Cannabinoids.

For decades, Cannabis sativa had been illegal to sell or consume around the world, including in the United States. However, in light of the recent 2018 Farm Bill and the legalization of hemp across the US, various cannabis preparations have flooded the market, making it essential to be able to quantitate the levels of the different acidic and neutral cannabinoids in C. sativa and to have a complete cannabinoid profile of the different chemovars of the cannabis plant. A GC-FID method was developed and validated for the analysis of 20 acidic and neutral cannabinoids as trimethylsilyl (TMS) derivatives. The analyzed cannabinoids include cannabidivarinic acid (CBDVA), cannabidiolic acid (CBDA), cannabinolic acid (CBNA), cannabielsoic acid (CBEA), cannabicyclolic acid (CBLA), cannabichromenic acid (CBCA), trans-Δ9-tetrahydrocannabivarinic acid (Δ9-THCVA), trans-Δ9-tetrahydrocannabinolic acid A (Δ9-THCAA), cannabigerolic acid (CBGA), cannabidiol (CBD), cannabicyclol (CBL), cannabidivarin (CBDV), trans-Δ9-tetrahydrocannabivarin (THCV), cannabichromene (CBC), trans-Δ8-tetrahydrocannabinol (Δ8-THC), trans-Δ9-tetrahydrocannabinol (Δ9-THC), cannabigerol (CBG), cannabinol (CBN), cannabicitran (CBT), and cannabielsoin (CBE). The method limit of detection (LOD) was as low as 0.1 µg/mL, while the limit of quantitation ranged from 0.25 µg/mL to 0.5 µg/mL. The precision (%RSD) was < 10%, while trueness ranged from 90 - 107%. The developed method is simple, accurate, and sensitive for the quantitation of all 20 acidic and neutral cannabinoids. Finally, the proposed method was successfully applied to the quantitation of the cannabinoids in different cannabis chemovars grown at the University of Mississippi.

Identification of 5F-Cumyl-PINACA, a Synthetic Cannabinoid, in the Herbal Material Used for Recreational Purposes in the Province of Trieste: Public Health Implications.

BACKGROUND: In recent years, the phenomenon of the production and trade of synthetic cannabinoids has grown, becoming a public health issue worldwide. The recent access- to the ED of the hospital of Trieste- of people who complained of episodes of hallucinations, sensation of poisoning, tachycardia, and air hunger following the inhalation of "Che Sballo platinum", have highlighted the need to perform further analysis on the contents of the packet sold as an air freshener, produced in Koper (Slovenia). OBJECTIVE: This paper wants to be an alert about the possible consequences on health due to the spreading of "Che Sballo platinum" in the province of Trieste. METHODS: The package contents were analyzed by a multi-target screening method of MRM-IDAEPI experiment. The result was then confirmed, and quantification was achieved via LC-ESI-MS/MS analysis in MRM mode using QTrap 6500 + Sinergy hydro column 100 x 2 mm 1.9 um transitions MRM1 368.3 → 250.0; MRM2 368.3 → 233.0. RESULTS: The initial screening tested negative for THC and showed positive results for 5F-Cumyl- PINACA. Quantitation result reported dose by the package of 8.5 mg of the compound. Formal notification was sent to the Italian Health Authorities (Notification No. 2021110205). CONCLUSION: Consumption of 5F-Cumyl-PINACA results in much more potent effects than marijuana. Lack of information about the actual concentration of the substance on the packaging does not allow drug users to have an adequate dosage, with possible toxic consequences on health. Further investigations must be done to discover the true extent of the phenomenon.

Entourage Effect and Analytical Chemistry: Chromatography as a Tool in the Analysis of the Secondary Metabolism of Cannabis sativa L.

Cannabis sativa L. has been used as medicine for thousands of years. Since the early identification of tetrahydrocannabinol (THC) in 1960, pharmacological activities were attributed to a group of unique structures named cannabinoids. For decades, research and development were applied to determine different cannabinoids and their medicinal properties. Nowadays there is evidence that the therapeutic benefits of the plant are based on the synergy of cannabinoids and other secondary metabolites such as terpenes and flavonoids. Differences between the medical performance of isolated compounds like cannabidiol (CBD) or THC and full-spectrum plant extracts are notable. Indeed, the superiority of the last one is provoked by the synergy between various different compounds. This improved medicinal effect is called the entourage effect. Chromatography has become the method of choice for the determination of cannabinoids, terpenes, and flavonoids, so it represents an excellent tool for a proper characterization of the plant and plant derived products. The objective of characterization relies not only in analyzing the fingerprint of cannabis, but also to identify different chemotypes for medical purposes. To understand the contributions of each natural product to this "entourage effect", this review presents an in-depth analysis of the utilization of High-performance liquid chromatography (HPLC), Gas chromatography (GC) and other methods for the analysis of phytocomponents of Cannabis sativa L. In this sense, a representative number of examples and advances made in the field together with limitations and future needs are provided. It can be concluded that standardized protocols and quality control policies and procedures are necessary for the comprehensive analysis of cannabis extracts and derivatives.

Semiquantitative Screening of THC Analogues by Silica Gel TLC with an Ag(I) Retention Zone and Chromogenic Smartphone Detection.

With the ever-evolving cannabis industry, low-cost and high-throughput analytical methods for cannabinoids are urgently needed. Normally, (potentially) psychoactive cannabinoids, typically represented by Δ9-tetrahydrocannabinol (Δ9-THC), and nonpsychoactive cannabinoids with therapeutic benefits, typically represented by cannabidiol (CBD), are the target analytes. Structurally, the former (tetrahydrocannabinolic acid (THCA), cannabinol (CBN), and THC) have one olefinic double bond and the latter (cannabidiolic acid (CBDA), cannabigerol (CBG), and CBD) have two, which results in different affinities toward Ag(I) ions. Thus, a silica gel thin-layer chromatography (TLC) plate with the lower third impregnated with Ag(I) ions enabled within minutes a digital chromatographic separation of strongly retained CBD analogues and poorly retained THC analogues. The resolution (Rs) between the closest two spots from the two groups was 4.7, which is almost 8 times higher than the resolution on unmodified TLC. After applying Fast Blue BB as a chromogenic reagent, smartphone-based color analysis enabled semiquantification of the total percentage of THC analogues (with a limit of detection (LOD) of 11 ng for THC, 54 ng for CBN, and 50 ng for THCA when the loaded volume is 1.0 µL). The method was validated by analyzing mixed cannabis extracts and cannabis extracts. The results correlated with those of high-performance liquid chromatography with ultraviolet detection (HPLC-UV) (R2 = 0.97), but the TLC approach had the advantages of multi-minute analysis time, high throughput, low solvent consumption, portability, and ease of interpretation. In a desiccator, Ag(I)-TLC plates can be stored for at least 3 months. Therefore, this method would allow rapid distinction between high and low THC varieties of cannabis, with the potential for on-site applicability.

Analysis of Anti-Cancer and Anti-Inflammatory Properties of 25 High-THC Cannabis Extracts.

Cannabis sativa is one of the oldest cultivated plants. Many of the medicinal properties of cannabis are known, although very few cannabis-based formulations became prescribed drugs. Previous research demonstrated that cannabis varieties are very different in their medicinal properties, likely due to the entourage effect-the synergistic or antagonistic effect of various cannabinoids and terpenes. In this work, we analyzed 25 cannabis extracts containing high levels of delta-9-tetrahydrocannabinol (THC). We used HCC1806 squamous cell carcinoma and demonstrated various degrees of efficiency of the tested extracts, from 66% to 92% of growth inhibition of cancer cells. Inflammation was tested by induction of inflammation with TNF-α/IFN-γ in WI38 human lung fibroblasts. The efficiency of the extracts was tested by analyzing the expression of COX2 and IL6; while some extracts aggravated inflammation by increasing the expression of COX2/IL6 by 2-fold, other extracts decreased inflammation, reducing expression of cytokines by over 5-fold. We next analyzed the level of THC, CBD, CBG and CBN and twenty major terpenes and performed clustering and association analysis between the chemical composition of the extracts and their efficiency in inhibiting cancer growth and curbing inflammation. A positive correlation was found between the presence of terpinene (pval = 0.002) and anti-cancer property; eucalyptol came second, with pval of 0.094. p-cymene and ß-myrcene positively correlated with the inhibition of IL6 expression, while camphor correlated negatively. No significant correlation was found for COX2. We then performed a correlation analysis between cannabinoids and terpenes and found a positive correlation for the following pairs: α-pinene vs. CBD, p-cymene vs. CBGA, terpenolene vs. CBGA and isopulegol vs. CBGA. Our work, thus, showed that most of high-THC extracts demonstrate anti-cancer activity, while only certain selected extracts showed anti-inflammatory activity. Presence of certain terpenes, such as terpinene, eucalyptol, cymene, myrcene and camphor, appear to have modulating effects on the activity of cannabinoids.

Rapid quantification of cannabinoids in beef tissues and bodily fluids using direct-delivery electrospray ionization mass spectrometry.

Hempseed cake is a byproduct of hempseed oil extraction and is potentially a useful source of protein and fiber for use in ruminant diets. However, data are lacking on the appearance and/or clearance of cannabinoids in tissues of animals fed hempseed cake. To this end, a rapid method for quantifying cannabinol (CBN), cannabidiol (CBD), cannabinolic acid (CBNA), cannabidiolic acid (CBDA), cannabigerolic acid (CBGA), cannabichromenic acid (CBCA), cannabidivarin (CBDV), cannabidivarinic acid (CBDVA), tetrahydrocannabinol (THC) and tetrahydrocannabinolic acid (THCA) in cattle tissues, plasma, and urine was developed using rapid screen electrospray ionization mass spectrometry (RS-ESI-MS). Regression coefficients of matrix-matched standard curves ranged from 0.9946 to >0.9999 and analyte recoveries averaged from 90.2 ± 15.5 to 108.7 ± 18.7% across all compounds. Limits of detection and quantification ranged from 0.05 to 2.79 ng · mL-1 and 0.17 to 9.30 ng · mL-1, respectively, while the inter-day relative standard deviation ranged from 5.1 to 15.1%. Rapid screening electrospray ionization mass spectrometry (RS-ESI-MS) returned no false positives for any cannabinoid in plasma, urine, and tissue (liver, skeletal muscle) samples from 6 non-dosed control animals (n = 90 samples; of which 72 samples were plasma or urine and 18 samples were tissues). Across-animal cannabinoid concentrations measured in 32 plasma samples of cattle dosed with ground hemp were quantified by RS-ESI-MS; analytical results correlated well (r2 = 0.963) with independent LC-MS/MS analysis of the same samples.

Feeding decreases the oral bioavailability of cannabidiol and cannabidiolic acid in hemp oil in New Zealand White rabbits (Oryctolagus cuniculus).

OBJECTIVE: To determine the pharmacokinetics of a solution containing cannabidiol (CBD) and cannabidiolic acid (CBDA), administered orally in 2 single-dose studies (with and without food), in the domestic rabbit (Oryctolagus cuniculus). ANIMALS: 6 healthy New Zealand White rabbits. PROCEDURES: In phase 1, 6 rabbits were administered 15 mg/kg CBD with 16.4 mg/kg CBDA orally in hemp oil. In phase 2, 6 rabbits were administered the same dose orally in hemp oil followed by a food slurry. Blood samples were collected for 24 hours to determine the pharmacokinetics of CBD and CBDA. Quantification of plasma CBD and CBDA concentrations was determined using a validated liquid chromatography-mass spectrometry (LC-MS) assay. Pharmacokinetics were determined using noncompartmental analysis. RESULTS: For CBD, the area under the curve extrapolated to infinity (AUC)0-∞ was 179.8 and 102 hours X ng/mL, the maximum plasma concentration (Cmax) was 30.4 and 15 ng/mL, the time to Cmax (tmax) was 3.78 and 3.25 hours, and the terminal half-life (t1/2λ) was 7.12 and 3.8 hours in phase 1 and phase 2, respectively. For CBDA, the AUC0-∞ was 12,286 and 6,176 hours X ng/mL, Cmax was 2,573 and 1,196 ng/mL, tmax was 1.07 and 1.12 hours, and t1/2λ was 3.26 and 3.49 hours in phase 1 and phase 2, respectively. Adverse effects were not observed in any rabbit. CLINICAL RELEVANCE: CBD and CBDA reached a greater Cmax and had a longer t1/2λ in phase 1 (without food) compared with phase 2 (with food). CBDA reached a greater Cmax but had a shorter t1/2λ than CBD both in phase 1 and phase 2. These data may be useful in determining appropriate dosing of cannabinoids in the domestic rabbit.